I am trying to install a Mongo DB designer tool Rock Mongo which requires PHP.
I tried installing the mongodb.dll in php.ini by downloading the driver from Windows.php.net downloads, specifically the file: php_mongodb-1.1.1-7.0-ts-vc14-x64.zip.
Environment
Windows 7 64 bit
Apache 2.4 web server
PHP 7.1
MongoDB 3.4
Attempt
Unzipped and copied mongodb.dll to my php7\ext directory.
I am still getting the following error when I try to open the ROCKMONGO index.php.
Related
I've been trying to install php_imagick on wamp64 without any luck.
The desired goal is for WordPress to stop showing the error message:
The optional module, Imagick, is not installed or has been disabled.
You can also skip reading and view the images attached below.
My setup:
Wamp64 Windows 10 Release Version 3.2.3.3 64 Bits [Windows Build: 19041]
PHP Version: 7.4.9
Build Date: Aug 4 2020 11:45:36
Windows: NT *username* 10.0 build 19041 (Windows 10) AMD64
Compiler Visual: C++ 2017
Architecture: x64
Loaded Configuration File: C:\wamp64\bin\apache\apache2.4.46\bin\php.ini
Thread Safety: enabled
I tried installing the following ImageMagick files:
1) ImageMagick-7.0.10-30-Q16-HDRI-x64-dll.exe
----A) php_imagick-3.4.3rc1-5.6-ts-vc11-x64.zip
----B) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
2) ImageMagick-7.0.10-30-Q16-x64-dll.exe
----A) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
----B) php_imagick-3.4.4rc2-7.3-ts-vc15-x64.zip
3) ImageMagick-6.9.3-7-Q16-x64-dll.exe (Current)
----A) php_imagick-3.4.4rc2-7.3-ts-vc15-x64.zip (Current)
----B) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
----C) php_imagick-3.4.3rc1-5.6-ts-vc11-x64.zip
What I did:
I first installed the EXE file and then extracted from the zip file just the php_imagick.dll file into this folder:
C:\wamp64\bin\php\php7.4.9\ext
Which matches my currently used PHP version (see images later for more information[php.ini]).
I tried restarting Wamp, rebuilding symlinks by switching PHP/Apache versions.
Will also be worth mentioning that I at one point tried extracting the full zip into the 'ext' folder under a folder named 'php_imagick' as shown below and did manage to get this error:
C:\wamp64\bin\php\php7.4.9\ext\php_imagick\php_imagick.dll (The specified procedure could not be found.)
but mostly I receive these errors:
[25-Sep-2020 08:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'php_imagick.dll' (tried: c:/wamp64/bin/php/php7.4.9/ext/php_imagick.dll (The specified module could not be found.), c:/wamp64/bin/php/php7.4.9/ext/php_php_imagick.dll.dll (The specified module could not be found.)) in Unknown on line 0
When I install Magick using the EXE, I make sure to check the install to the path, Change the folder to C:\ImageMagick, and install the legacy drivers if possible, as suggested on Stack OverFlow.
(I also make sure to uninstall the last version I tried each time)
I have Visual Studio installed and a bunch of redistributables and also both x86 and x64 versions of these:
https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
http://www.microsoft.com/en-us/download/details.aspx?id=30679
Without any luck, I went ahead and read several Stack OverFlow posts and could not find a solution.
How to install ImageMagick with Wampserver 3.0.0 64?
step-by-step instructions for installing IMAGEMAGICK on WAMP?
Installing php_imagick.dll PHP extension on wampserver 2.2
Unable to install php_imagick.dll on wamp
Imagick delegates installation on WAMP
How to install ImageMagick with Wampserver 3.0.0 64?
step-by-step instructions for installing IMAGEMAGICK on WAMP?
Installing php_imagick.dll PHP extension on wampserver 2.2
Unable to install php_imagick.dll on wamp
Imagick delegates installation on WAMP
WAMP PHP Startup Error: Unable to load dynamic library
Installing ImageMagick extension with php/windows
Linker error when trying to use ImageMagick as static libraries with Visual Studio compiler
Installing Magick++ in Visual C++ 2010
Installing Magick++ in visual studio 2019
ImageMagick with Visual Studio
WampServer and Imagemagick, imagick php module not recogized
Cannot load imagick library
ImageMagick not working
What can I try next?
typo in line 955: .php=.dll
I hired a freelancer to fix this for us.
Uninstall any versions of WampServer and ImageMagick you have installed
Don't forget to backup your database and www folder before you uninstall
We are going to install a trustable software called Chocolatey that will help us fix a bunch of errors with Wamp64 and it's extensions as well as help us update those applications with one command.
For those of you who already fixed this before using Chocolatey and
now seeing this error message again simply update Wamp and ImageMagick
using the choco commands provided on their website and then read my
note under 4) for more information
Run PowerShell as Admin
Follow this guide to Download chocolatey https://chocolatey.org/install
Use the same methods to Download Wamp64 https://chocolatey.org/packages/wamp-server
Run Wamp from the newly created shortcut on your desktop
Change the PHP version to 7.4.9 or the latest and only then move
to the other steps
Don't worry about the fact the folder is named Wamp and not Wamp64. It's still the 64bit version. You can check this in the about section of Wamp
Download https://chocolatey.org/packages/imagemagick
Download https://windows.php.net/downloads/pecl/deps/ImageMagick-7.0.7-11-vc15-x64.zip
Note: If that doesn't work, they probably updated again. Just try the same methods using newer versions then these. I will first try more recent versions of php_imagick instead of replacing the ImageMagick core DLL files. One thing I will not do is give up.
Extract And Copy all CORE_RL and IM_MOD_RL DLL files into C:\wamp\bin\php\php7.4.9 where php.exe is located
(Do not run any EXE file from here as we already installed ImageMagick)
Download https://windows.php.net/downloads/pecl/releases/imagick/3.4.4/php_imagick-3.4.4-7.4-ts-vc15-x64.zip
Extract and Copy just the php_imagick.dll file to C:\wamp\bin\php\php7.4.9\ext
Open your php.ini file by left-clicking Wamp->PHP->php.ini and then make sure you delete all leftovers and add below any extention= line the code below:
extention=imagick
(Apparently, New PHP versions require writing it without the "php_"...".dll" parts)
Restart Wamp by closing it and reopening it from its shortcut
This is by far the only solution I could get running.
choco:
Google = https://www.google.com/search?q=chocolatey
2019 = http://web.archive.org/web/20190101113929/https://chocolatey.org/
2018 = http://web.archive.org/web/20180414000310/https://chocolatey.org/
Enjoy
I use wampserver 3.2.3 64bit together with PHP 7.3.
Copying the CORE_RL and IM_MOD_RL DLLs into the PHP root direcory as orr burgel recommended in item #5 did not work for me.
I had to copy these DLLs into c:\wamp64\bin\apache\apache2.4.41\bin.
I am using Laravel Forge, running lemp servers. I've tried 7.2 and 7.3, on Ubuntu 18.04.
I went through this tutorial to try an install oci8 extension. It seems to have installed in cli, as I can tell by php -m but no loading, and no errors via fpm.
I went through this tutorial - https://gist.github.com/hewerthomn/81eea2935051eb2500941a9309bca703
I installed 12_2 (64 bit) instantclient basic and SDK, via pecl.
I see the oci8.so file located here - /usr/lib/php/20180731
I have the loading extension stanza at the end of my cli and fpm ini files.
I have tried php 7.2 and 7.3.
Obviously we're getting this error in Laravel simply because the extension isn't loading - https://github.com/yajra/laravel-oci8/issues/506
Help please!
I have installed the lastest mongodb php driver on linux centos 6 with plesk onyx using the following commands.
yum install plesk-php56-devel make gcc openssl-devel
/opt/plesk/php/5.6/bin/pecl install mongodb
echo "mongodb.so" > /opt/plesk/php/5.6/etc/php.d/mongodb.ini
plesk bin php_handler --reread
I have also added extension=mongodb.so to the php.ini file.
I also changed the cli version from php 5.3 to 5.6 before running the install as php needed to be at least 5.4 for the install to continue.
The mongodb section in now in my phpinfo() page. However the extension is not loaded when I test it in a php page.
When I try to reinstall I get this message:
PHP Warning: PHP Startup: Unable to load dynamic library
'/opt/plesk/php/5.6/lib64/php/modules/mongo.so' -
/opt/plesk/php/5.6/lib64/php/modules/mongo.so: cannot open shared
object file: No such file or directory in Unknown on line 0
pecl/mongodb is already installed and is the same as the released
version 1.2.9 install failed
Also, the line that says /opt/plesk/php/5.6/lib64/php/modules/mongo.so
refers to mongo.so when in actual fact the file present in the modules folder is mongodb.so
Does anyone have any suggestions or experience with this please?
For those facing the same issue. This was fixed by changing the extension name in the following file /opt/plesk/php/5.6/etc/php.d/mongodb.ini from mongo.so to mongodb.so
And then remember to use the new mongo driver class ie MongoDB\Driver\
I tried to install mongodb. After placing php_mongodb.dll in php/ext folder in xampp folder I am getting
The procedure entry point php_var_unserialize_init could not be
located in the dynamic link library php7ts.dll
error while I restart xampp server in Windows 7 (64 bit).
My php version is 7.
Thread safety is enabled
My compiler is MSVC14 and Architecture is x86.
I tried to place php7ts.dll,but still i am getting same error.
I am unable to install composer on my local system. Following are my local system and PHP details:
OS - Windows 8.1 Pro - 64 Bit OS - X84- based processor
I have installed XAMPP -
PHP Version 5.6.8.
On trying to install composer, it requested PHP_pdo.dll. However, I downloaded the dll and placed it into the xampp/PHP/ext folder
But seems some versioning issue. Where can I get PHP_pdo.dll for PHP Version 5.6.8 VC11 X84?
composer is installed using the PHP CLI (Command Line Interface)
The php.ini that controls the CLI is in your \xampp\php folder (its not the same one that controls PHP under Apache).
Edit \xampp\php\php.ini and make sure that
extension=php_pdo.dll
is not commented out, a comment has a # in column 1
That said, you had better get the original php_pdo.dll back that was in xampp\php\ext as there is no way of knowing if you put a good or bad new version in when you did whatever you did with the new one