I tried to install mongodb. After placing php_mongodb.dll in php/ext folder in xampp folder I am getting
The procedure entry point php_var_unserialize_init could not be
located in the dynamic link library php7ts.dll
error while I restart xampp server in Windows 7 (64 bit).
My php version is 7.
Thread safety is enabled
My compiler is MSVC14 and Architecture is x86.
I tried to place php7ts.dll,but still i am getting same error.
Related
I am trying to install a Mongo DB designer tool Rock Mongo which requires PHP.
I tried installing the mongodb.dll in php.ini by downloading the driver from Windows.php.net downloads, specifically the file: php_mongodb-1.1.1-7.0-ts-vc14-x64.zip.
Environment
Windows 7 64 bit
Apache 2.4 web server
PHP 7.1
MongoDB 3.4
Attempt
Unzipped and copied mongodb.dll to my php7\ext directory.
I am still getting the following error when I try to open the ROCKMONGO index.php.
I am using WAMP with php v5.5.12.
Trying to install datastax php driver(https://github.com/datastax/php-driver).
1. I take the compiled dll file from here and put it in /ext folder
2. Add the extention=php_cassandra.dll to php.ini
3. Restarting WAMP server
I get this error in wamp php error log:
[28-Jan-2016 07:32:57 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_cassandra.dll' - The specified module could not be found.
Also installed Pear package, but there are no changes.
Does anyone here experience with cassandra new driver on windows?
What can be the problem?
I could not either make the .dll found on the pecl php site work. Same error.
But the .dll found here works!
http://downloads.datastax.com/php-driver/windows/cassandra/
You will need to use the Thread Safe version (TS) and of course the one for PHP5.5. Also you need to use the x86 if you WAMPServer is the 32 bit and the x64 if WAMPServer is the 64bit version
That dll should be place into the \wamp\bin\php\php5.5.12\ext folder
I am using magic library to change the resolution of the images. But I am getting following error when I am running the Wamp.
I am also sharing links of the website I have followed.
Link
http://www.zoharbabin.com/5-steps-to-get-imagemagick-on-xampp-1-7-3/
These are step by step instructions on how to get ImageMagick running under PHP in a Windows environment. Apache does not provide binaries for Windows and relies upon several sources to do so:
XAMPP
WampServer
Apache Lounge
Bitnami
Apache Haus
It is recommended to download either the XAMPP or WampServer distributions as they are complete packages that contain Apache HTTP server, PHP and MySql known and tested to work together.
Making ImageMagick work was not easy for me. It took two days of trial and error to get this to work. Hopefully this will help you get up and running faster. I have this running on the following:
Windows 7 Home Edition 64-bit
XAMPP 5.6.3
Apache HTTP 2.4.10 (Win32), VC 11
PHP 5.6.3 x86 VC 11, Thread safe
Thus, a 32-bit web framework compiled with VC 11 and thread safety enabled all running on 64-bit Windows 7. You must choose a 32-bit ImageMagick DLL distribution along with a 32-bit VC11 thread safe DLL wrapper to match.
The instructions below should work equally well with WampServer as there is no dependency on the Windows web framework.
The important thing to understand here is that you must know your web server environment and what components are installed and built with. you must match bitness, Visual C runtime, and thread safety configurations together.
Step #1: Install imageMagick to C:\ImageMagick
Go to Link and download the latest release. Use the 32 bit DLL version (ImageMagick-6.9.0.0-Q16-x86-dll.exe)
Install it into C:\ImageMagick directory
Step #2: Get the PHP wrapper from the Windows PECL repository
Go to http://pecl.php.net/package/imagick
Get the latest stable version, 3.1.2. You want the 32-bit, VC 11, thread safe version
php_imagick-3.1.2-5.6-ts-vc11-x86.zip
Step #3: Create distribution directory
Create a /php/ext/imagemagick directory
Copy the ZIP into it and unzip it
Step #4: Make backup copy of DLLs
Make a C:\ImageMagick\Backup directory
Copy DLLs in the C:\ImageMagick directory to the C:\ImageMagick\Backup directory
Step #5: Overwrite DLLs
This is the most important step that if you don't do, will result in the PHP wrapper not loading correctly:
Take all the DLL files in \php\ext\ImageMagick and overwrite those in C:\ImageMagick
If you do a SET on the DOS command line you will see that the ImageMagick installer had created a entry into the system variable environment path (i.e. to C:\ImageMagick). Supporting DLLs will be picked up from there and they will be the Pecl Windows repository DLLs, not the distribution.
Step #6: Set module extension in PHP.INI
First, copy the php extension wrapper php_imagick.dll into the /php/ext directory. Then modify the PHP.INI to do this:
extension=php_imagick.dll
Step #7: Reboot Apache
Reboot Apache
Go to phpinfo and see that imagick is installed as a module.
Here's where you can learn more about your environment.
Pay attention to stuff in phpinfo like:
Compiler: MSVC11 (Visual C++ 2012)
Architecture: x86 (32 bit; as opposed to x64 which is 64 bit)
Thread safety: enabled (TS)
Apache Environment Configuration (PATH should have C:\ImageMagick included)
More gory details: Installing ImageMagick with PHP and Windows
I tried every article on installing imagick in xampp but non of them is worked. it is surprise to see that installing dll is not as simple as it normally suggest
i am trying imagick on xampp 1.8.3 but if any one have any idea to install imagick in xampp then please guide me
I am trying on
Windows 8 Pro 64-bit
XAMPP Version: 1.8.3
Control Panel Version: 3.2.1 [ Compiled: May 7th 2013 ]
firstly i installed Binary Release Win32 dynamic at 16 bits-per-pixel in C:\ImageMagick-6.8.9-Q16
then load this dll in php\ext
and lastly edit extension=php_imagick.dll in php.ini
now after restart windows i got this error
PHP Startup: Unable to load dynamic library 'C:\xampp\php\ext\php_imagick.dll'
- The specified procedure could not be found.
lastly all other dll files have PHP 5.5.9 version but i have not found any php_imagick.dll that have PHP version 5.5 .Even this dll is also 5.3 PHP version. is this work also
Please tell me why i am getting this error
I believe that imagemagick also needs access to the CORE_RL_*.dll set which are located in the C:\ImageMagick-6.8.9-Q16 directory that you installed into.
You have to add this folder into to your PATH for these to be found at runtime.
Its a bit messy and if anyone knows a better solution than adding this to the PATH I would love to know about it.
Try downloading your php_imagick.dll from here http://windows.php.net/downloads/pecl/releases/imagick/
I have the exact same issue as PHP cURL not working - WAMP on Windows 7 64 bit
CURL doesn't load at Apache restart, with message: "PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.3.22/ext/php_curl.dll' - The operating system cannot run %1.\r\n in Unknown on line 0"
Except that I am not installing 5.3.13 as in the other thread but I am attempting to upgrade PHP in an existing WAMP installation from 5.3.4 to 5.3.22, both x64 VC9 TS on a Win 2008R2 64 bits, running Apache 2.2.4 x64.
I did the following steps:
stopped Apache
unzip php5.3.22 in /wamp/bin/php5.3.22;
updated php.ini, httpd.conf and the 2 Wamp config files to point to the new PHP version;
updated php5ts.dll and php5isapi.dll in Apache\bin with the new ones
updated Windows PATH to point to php5.3.22 folder instead of php5.3.4
restarted Apache -> CURL load error message
I could try most of the answers provided in other threads except the one from Matthieu:
Go to http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/ and download the curl version that corresponds to your php version under "Fixed curl extensions:".
...as there is no "Fixed curl extension" for 5.3.22 in Anindya's site.
Does anyone know if there is need or not for a "fixed curl lib" after 5.3.13? and where I can find it?
Either there are some typos in your question or you have done a few things wrong.
The new PHP should have gone into \wamp\bin\php\php5.3.22
updated php5ts.dll and php5isapi.dll in Apache\bin with the new ones This is done by Switching versions in WAMP, you dont do it manually
updated Windows PATH to point to php5.3.22 folder instead of php5.3.4 There is no need to put PHP on the PATH, in fact it reduces the ability of WAMPServer to switch between various versions of PHP.
Have a look at this it may help How to install a version of PHP into an existing WAMP install