I've been trying to install php_imagick on wamp64 without any luck.
The desired goal is for WordPress to stop showing the error message:
The optional module, Imagick, is not installed or has been disabled.
You can also skip reading and view the images attached below.
My setup:
Wamp64 Windows 10 Release Version 3.2.3.3 64 Bits [Windows Build: 19041]
PHP Version: 7.4.9
Build Date: Aug 4 2020 11:45:36
Windows: NT *username* 10.0 build 19041 (Windows 10) AMD64
Compiler Visual: C++ 2017
Architecture: x64
Loaded Configuration File: C:\wamp64\bin\apache\apache2.4.46\bin\php.ini
Thread Safety: enabled
I tried installing the following ImageMagick files:
1) ImageMagick-7.0.10-30-Q16-HDRI-x64-dll.exe
----A) php_imagick-3.4.3rc1-5.6-ts-vc11-x64.zip
----B) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
2) ImageMagick-7.0.10-30-Q16-x64-dll.exe
----A) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
----B) php_imagick-3.4.4rc2-7.3-ts-vc15-x64.zip
3) ImageMagick-6.9.3-7-Q16-x64-dll.exe (Current)
----A) php_imagick-3.4.4rc2-7.3-ts-vc15-x64.zip (Current)
----B) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
----C) php_imagick-3.4.3rc1-5.6-ts-vc11-x64.zip
What I did:
I first installed the EXE file and then extracted from the zip file just the php_imagick.dll file into this folder:
C:\wamp64\bin\php\php7.4.9\ext
Which matches my currently used PHP version (see images later for more information[php.ini]).
I tried restarting Wamp, rebuilding symlinks by switching PHP/Apache versions.
Will also be worth mentioning that I at one point tried extracting the full zip into the 'ext' folder under a folder named 'php_imagick' as shown below and did manage to get this error:
C:\wamp64\bin\php\php7.4.9\ext\php_imagick\php_imagick.dll (The specified procedure could not be found.)
but mostly I receive these errors:
[25-Sep-2020 08:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'php_imagick.dll' (tried: c:/wamp64/bin/php/php7.4.9/ext/php_imagick.dll (The specified module could not be found.), c:/wamp64/bin/php/php7.4.9/ext/php_php_imagick.dll.dll (The specified module could not be found.)) in Unknown on line 0
When I install Magick using the EXE, I make sure to check the install to the path, Change the folder to C:\ImageMagick, and install the legacy drivers if possible, as suggested on Stack OverFlow.
(I also make sure to uninstall the last version I tried each time)
I have Visual Studio installed and a bunch of redistributables and also both x86 and x64 versions of these:
https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
http://www.microsoft.com/en-us/download/details.aspx?id=30679
Without any luck, I went ahead and read several Stack OverFlow posts and could not find a solution.
How to install ImageMagick with Wampserver 3.0.0 64?
step-by-step instructions for installing IMAGEMAGICK on WAMP?
Installing php_imagick.dll PHP extension on wampserver 2.2
Unable to install php_imagick.dll on wamp
Imagick delegates installation on WAMP
How to install ImageMagick with Wampserver 3.0.0 64?
step-by-step instructions for installing IMAGEMAGICK on WAMP?
Installing php_imagick.dll PHP extension on wampserver 2.2
Unable to install php_imagick.dll on wamp
Imagick delegates installation on WAMP
WAMP PHP Startup Error: Unable to load dynamic library
Installing ImageMagick extension with php/windows
Linker error when trying to use ImageMagick as static libraries with Visual Studio compiler
Installing Magick++ in Visual C++ 2010
Installing Magick++ in visual studio 2019
ImageMagick with Visual Studio
WampServer and Imagemagick, imagick php module not recogized
Cannot load imagick library
ImageMagick not working
What can I try next?
typo in line 955: .php=.dll
I hired a freelancer to fix this for us.
Uninstall any versions of WampServer and ImageMagick you have installed
Don't forget to backup your database and www folder before you uninstall
We are going to install a trustable software called Chocolatey that will help us fix a bunch of errors with Wamp64 and it's extensions as well as help us update those applications with one command.
For those of you who already fixed this before using Chocolatey and
now seeing this error message again simply update Wamp and ImageMagick
using the choco commands provided on their website and then read my
note under 4) for more information
Run PowerShell as Admin
Follow this guide to Download chocolatey https://chocolatey.org/install
Use the same methods to Download Wamp64 https://chocolatey.org/packages/wamp-server
Run Wamp from the newly created shortcut on your desktop
Change the PHP version to 7.4.9 or the latest and only then move
to the other steps
Don't worry about the fact the folder is named Wamp and not Wamp64. It's still the 64bit version. You can check this in the about section of Wamp
Download https://chocolatey.org/packages/imagemagick
Download https://windows.php.net/downloads/pecl/deps/ImageMagick-7.0.7-11-vc15-x64.zip
Note: If that doesn't work, they probably updated again. Just try the same methods using newer versions then these. I will first try more recent versions of php_imagick instead of replacing the ImageMagick core DLL files. One thing I will not do is give up.
Extract And Copy all CORE_RL and IM_MOD_RL DLL files into C:\wamp\bin\php\php7.4.9 where php.exe is located
(Do not run any EXE file from here as we already installed ImageMagick)
Download https://windows.php.net/downloads/pecl/releases/imagick/3.4.4/php_imagick-3.4.4-7.4-ts-vc15-x64.zip
Extract and Copy just the php_imagick.dll file to C:\wamp\bin\php\php7.4.9\ext
Open your php.ini file by left-clicking Wamp->PHP->php.ini and then make sure you delete all leftovers and add below any extention= line the code below:
extention=imagick
(Apparently, New PHP versions require writing it without the "php_"...".dll" parts)
Restart Wamp by closing it and reopening it from its shortcut
This is by far the only solution I could get running.
choco:
Google = https://www.google.com/search?q=chocolatey
2019 = http://web.archive.org/web/20190101113929/https://chocolatey.org/
2018 = http://web.archive.org/web/20180414000310/https://chocolatey.org/
Enjoy
I use wampserver 3.2.3 64bit together with PHP 7.3.
Copying the CORE_RL and IM_MOD_RL DLLs into the PHP root direcory as orr burgel recommended in item #5 did not work for me.
I had to copy these DLLs into c:\wamp64\bin\apache\apache2.4.41\bin.
Related
Been working for days now trying to find an easy way to install V8Js on XAMPP for windows, yet with no success.
I have downloaded the latest XAMPP version with PHP version 7.2.0 VC15, and followed the instructions in this blog post - https://blog.xenokore.com/how-to-install-v8js-for-php-on-windows/ - but to no avail. I don't see a mention to V8Js in the phpinfo, and when I try to use it I get an ERROR
Error: Class 'V8Js' not found in...
I have downloaded the dll files from here - https://blog.xenokore.com/how-to-install-v8js-for-php-on-windows/ - and used the latest 7.2.1 VC15 x86 ts version with no success.
Can anyone offer some help?
You need to download lasted php version from here instead https://www.apachelounge.com/viewtopic.php?t=6359
Then move a php_v8js.dll from php\ext into same directory on your local.
But with 5 files additional from root directory of php have to move into your apache\bin instead
icui18n.dll
icuuc.dll
v8.dll
v8_libbase.dll
v8_libplatform.dll
Be sure to have it in your php.ini, by adding the following line:
extension=php_v8js.dll
Then try to restart apache or check by command php -m, have fun.
I tried every article on installing imagick in xampp but non of them is worked. it is surprise to see that installing dll is not as simple as it normally suggest
i am trying imagick on xampp 1.8.3 but if any one have any idea to install imagick in xampp then please guide me
I am trying on
Windows 8 Pro 64-bit
XAMPP Version: 1.8.3
Control Panel Version: 3.2.1 [ Compiled: May 7th 2013 ]
firstly i installed Binary Release Win32 dynamic at 16 bits-per-pixel in C:\ImageMagick-6.8.9-Q16
then load this dll in php\ext
and lastly edit extension=php_imagick.dll in php.ini
now after restart windows i got this error
PHP Startup: Unable to load dynamic library 'C:\xampp\php\ext\php_imagick.dll'
- The specified procedure could not be found.
lastly all other dll files have PHP 5.5.9 version but i have not found any php_imagick.dll that have PHP version 5.5 .Even this dll is also 5.3 PHP version. is this work also
Please tell me why i am getting this error
I believe that imagemagick also needs access to the CORE_RL_*.dll set which are located in the C:\ImageMagick-6.8.9-Q16 directory that you installed into.
You have to add this folder into to your PATH for these to be found at runtime.
Its a bit messy and if anyone knows a better solution than adding this to the PATH I would love to know about it.
Try downloading your php_imagick.dll from here http://windows.php.net/downloads/pecl/releases/imagick/
I have RabbitMQ running on one of our servers and am trying to connect to it via PHP. I am developing on a Windows7 machine and my first line of code reads:
$cnn = new AMQPConnection();
It gives me the error:
Fatal error: Class 'AMQPConnection' not found in
I know that it is something that I need to install but what is it ? I am new to PHP so a little help would be nice.
Ps: I can connect to the RMQ server via the RabbitMQ admin web interface.
Thank you
Jack
Installation guide for php_amqp 1.4.0 (Stable version):
Download proper package for your php version from https://pecl.php.net/package/amqp/1.4.0/windows
Unpack php_amqp.dll to X:/php/ext/ directory
Unpack rabbitmq.1.dll to X:/Windows/system (not system32) directory
Modify php.ini file and add "extension=php_amqp.dll" line at the end of extensions list
Verify module installation by executing command "X:/php/php.exe -m" in command line
Restart webserver
I am developing on a Windows7 machine
You may be out of luck using that specific code. That class is from the PECL aqmp extension. Inside the installation instructions, it states:
Note to Windows users: This extension does not currently support Windows since the librabbitmq library does not yet support Windows.
You will want to use another library to speak to your message queue instead.
The rabbitmq-c library supports windows now, and the php_amqp pecl extension builds on windows as well. The documentation just hasn't been updated, nor are there any official binary builds in the wild. However, I managed to get them to build and have some 32 bit dll's available for download here:
http://www.nathanjohnson.info/?p=77
# AMQP installation php.net:
Note to Windows users: This extension does not currently support Windows since the librabbitmq library does not yet support Windows.
But here at RabbitMQ website is a windows installer...
Apparently this php.net page is outdated
To install do like this:
Download the correct package for your php from this official PECL amqp 1.4.0 page
unzip
add amqp.dll to your php ext folder
add rabbitmq.1.dll to your windows system 32 folder.
This according to the post on the blog I found here i think it is from the same #NathanJohnson who posted also here.
How I got it working:
My System Config: Win 7 Pro, (x64) XAMPP running PHP 5.6(x86)
Follow instruction from here to install RabbitMQ:
https://www.rabbitmq.com/install-windows.html
Now download compatible extension from here
https://pecl.php.net/package/amqp/1.4.0/windows
in my case it is "5.6 Thread Safe (TS) x86"
Now from zip file (php_amqp-1.4.0-5.6-ts-vc11-x86.zip) downloaded copy dll "php_amqp.dll" to your php extension folder in my case it is "xampp/php/ext" and copy dll "rabbitmq.1.dll" to "Windows\system" directory.
now register your php_amqp dll in php.ini file as
"extension=php_amqp.dll"
now restart apache.
Done. Now you should not get AMQPConnection not found exception.
ImageMagick is working when I test it from cmd but when using it for Xampp and restarting it then the error message I receive is:httpd.exe-Entry Point Not Found. The procedure entry point MagickGetImageGravity could not be located in the dynamic link library CORE_RL_wand_.dll.
The second message is PHP StartUp: Unable to load dynamic library C:\xampp\php\ext\php_imagick.dll- The specified procedure could not be Found.
I'm pretty sure second error message is caused by first error up top. Probably wrong dll. I'm on Windows 7 64 BIT running PHP 5.3.5 and Apache 2.2.17. Thanks
My refrence is this page
ImageMagick 6.8.0 binaries compiled with VC9 (Visual Studio 2008). I noticed that the official ImageMagick builds are now Visual Studio 2010 and that wouldn’t work well with PHP compiled with 2008. see phpInfo() and search for compiler and php version.
The download link for the binaries is here: imagick-php54-php53.tgz
I download this folder and copy php54 -> php_imagick_ts.dll to xampp\php\ext
My PhP Version is : PHP Version 5.4.4
then rename it to php_imagick.dll.
At the end restart your appache server.
I had this same problem and banged my head against all kinds of possible solutions before finally finding a combination of Imagick builds and dll's that would play nicely with my setup. Here's what finally worked for me:
OS: Windows 7 64 Bit
PHP: 5.5.6
XAMPP: 1.8.3
Compiler: MSVC11
Architecture: x86
ImageMagick: ImageMagick-6.7.7-5-Q16-windows-dll (available here)
Imagick DLL: PHP5.5.x version from http://www.peewit.fr/imagick/
Once I finally had this set up, Apache finally started without any errors. Hopefully it works for you, too!
I think there some problem loading imagemagick php module while you install latest version of windows binary ,i rectify the problem by download 6.7.7-5-Q16 32bit version and its worked on that version.once install this version download imagemagick PHP module and restart apache.
There don't seem to be any concise tutorials/walk throughs for installing ImageMagick on WAMP for use with PHP.
I've tried dozens of combinations of their binary releases with different php extension dll files. I can get imagemagick working fine from the command line, and I can get it to show as ticked in the WAMP extensions, but can't actually use it.
Has anyone come across a good guide for installing this ball ache piece of software?
I've followed http://www.knowledge-transfers.com/it/installing-imagemagick-on-windows-setup-imagick-on-php with no luck...
Update: this is what happens when I follow the steps in PHP farmer's answer on windows7. My php.ini is setup as follows:
extension_dir = "c:/wamp/bin/php/php5.3.0/ext/"
extension=php_imagick.dll
I reboot and get these two errors in this order
and here is the dll file where it should be:
I know this is old post but I spend my all day to make it work, so here are the steps that helped me:
Download ImageMagick Binary Release - http://www.imagemagick.org/script/download.php
Install in C:\imagemagick, on last step check "Add application directory to your system path"
Download Imagick DLL: PHP5.6.x version from http://www.peewit.fr/imagick/ (I have 5.6+ version installed on my localhost
Copy php_imagick.dll to C:\wamp\bin\php\ext
Download PHP 5.6 Thread Safe (TS) x86 version from http://pecl.php.net/package/imagick/3.1.2/windows
Copy CORE_RL_* files to C:\wamp\bin\apache\bin\
Edit php.ini file in C:\wamp\bin\apache\bin\php.ini, add extension=php_imagick.dll line in extensions section
Copy all files from C:\imagemagick\modules\coders and C:\imagemagick\modules\filters to C:\imagemagick to load ImageMagick supported formats
Go to Control Panel -> System -> Advanced Settings -> Environment Variables -> New System Variable -> MAGICK_HOME = C:\imagemagick
Restart Wamp server and check phpinfo() for imagick plugin
If last step does not work, restart Windows
I have improved fsasvari answer to cater general scenarios and versions. All credits to him.
Install Imagick in WAMP
Open your phpinfo() page
Check the below
PHP version (mine : 5.5.12)
Compiler (mine : MSVC11 (Visual C++ 2012) )
Architecture : (mine : x64)
Thread Safety : enabled
Loaded Configuration File (mine : C:\wamp\bin\apache\apache2.4.9\bin\php.ini)
extension_dir : (mine : c:/wamp/bin/php/php5.5.12/ext/)
Apache Bin (Not in phpinfo() page) : C:\wamp\bin\apache\apache2.4.9\bin\
Get the latest release match to your architecture from here (for me it was ImageMagick-x86_64-pc-windows.exe).
Copy all files from C:\imagemagick\modules\coders and C:\imagemagick\modules\filters to C:\imagemagick to load ImageMagick supported formats
Install in C:\imagemagick, on last step check "Add application directory to your system path"
Download the PECL matching to your architecture
http://pecl.php.net/package/imagick/3.1.2/windows
(for me : 5.5 Thread Safe (TS) x64)
Extract it and copy all the CORE_RL_* files to apache bin folder (mine : C:\wamp\bin\apache\apache2.4.9\bin)
Copy php_imagick.* files to extension dir (mine : c:/wamp/bin/php/php5.5.12/ext/)
Edit php.ini file (mine : C:\wamp\bin\apache\apache2.4.9\bin\php.ini)
add extension=php_imagick.dll line in extensions section
Go to Control Panel -> System -> Advanced Settings -> Environment Variables -> New System Variable -> MAGICK_HOME = C:\imagemagick
Restart Wamp server and check phpinfo() for imagick plugin
If last step does not work, restart Windows (Specially if you have previously installed imagemagick in different folder/version)
For WAMPSERVER 3.1.9 64bit, PHP Version: 7.3.5
I had a lot of trouble with this as well and some things I did wrong was that I doubted ImageMagick would load on my new php version. But you have to believe it will work and don't try with older php versions :)
So this was my approach, remember to follow it with your own settings and versions/folders.
Before you start, make sure you running the php version you want to run. If you installed Wampserver 3, you may click the wamp icon and go to php version and activate the one you want to run.
1
Get latest ImageMagick version for your system here: http://ftp.icm.edu.pl/packages/ImageMagick/binaries/
(I got the ImageMagick-x86_64-pc-windows.exe in the bottom)
2
Install ImageMagick in C:/imagemagick (I put it in lower cases),
You will be asked for some stuff during install, just make sure the path thingy is ticked.
You should also tick the convert thingy if it allows you.
Then after install you can run CMD and type convert -version to see if imagick is installed.
3
Run <?php phpinfo(); ?> And find out these settings:
PHP Version: 7.3.5
System: Windows
Compiler: MSVC15 (Visual C++ 2017) ([VC15])
Architecture: x64 (or maybe you have x86)
Thread Safety: enabled ([TS] else [NTS])
You probably have other settings, but you need to remember yours to download the proper php_imagick.dll
4
Get the php_imagick.dll you want for your php version from here: http://pecl.php.net/package/imagick
I got mine from here: http://pecl.php.net/package/imagick/3.4.4/windows for php 7.3
Remember your info from the phpinfo(), it has to match, else it won't work.
5
After you unzip it, copy the php_imagick.dll and paste it in C:/wamp64/bin/php/php7.3.5/ext/
Then copy all the other .dll files from that folder into C:/wamp64/bin/apache/apache2.4.39/bin/
Yes it's dirty but you will get it working like this.
6
Add extension=php_imagick.dll in C:/wamp64/bin/php/php7.3.5/phpForApache.ini
I added it after the other extensions in the file.
7
Restart all Wamp services.
If you been messing around earlier with installs, you might have to restart the computer due to some weird cache stuff.
8
Check phpinfo() again if imagick shows up and try something like $im = new Imagick();
9
Click the Wamp icon -> php -> extensions, php_imagick should be listed.
Good luck! :)
PHP 5.4 php_imagick.dll is here: http://www.peewit.fr/imagick/ .
I read somewhere that 64bit php doesnt work with php_imagick. That might be the case when you get this error in apache_error.log
PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.4.3/ext/php_imagick.dll' -
%1 is not a valid Win32 application.\r\n in Unknown on line 0
As mentioned above, it was also necessary to add this into httpd.conf (also, i read you cant have spaces/dashes/dots):
SetEnv MAGICK_HOME C:/imagemagick"
If you dont, you might get this error:
"PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.4.3/ext/php_imagick.dll' -
The specified procedure could not be found. in Unknown on line 0"
In the end, this article might partially help: http://www.elxsy.com/2009/07/installing-imagemagick-on-windows-and-using-with-php-imagick/
This was a headache for me as well, but unfortunately I installed this quite awhile ago. The instructions from that link you posted seem accurate. Have you ran phpinfo(); to see if it is installed in the Apache Environment? It should be listed as MAGICK_HOME.
Make sure "SetEnv MAGICK_HOME C:/imagemagick" is set at the end of your httpd.conf file. Assuming imagemagick is installed in that directory.
Be sure that you have the extension "php_imagick.dll" in your php.ini file as well.
It should work just fine if you have all those set.
On another note, here is a nice little library someone built to make imagick easier to use. https://github.com/francodacosta/phmagick
I hope that helps! Good luck!
I've never used WAMP but I have found that sometimes installing PHP extensions on Windows I need to ensure that any dll's that the extension relies on is in the Windows system PATH. If there is more than the one dll packaged with the imagemagick extension, try adding the directory that the dll's reside in to the Windows system PATH then REBOOT (to ensure that the web server gets a copy of the NEW environment).
I know this is an old question but i guess this will help someone someday out there....
If you are on WAMPP and have PHP 5.4.x installed , go here http://www.peewit.fr/imagick/
and download appropriate files as instructed. It will work.
Please see this answer already on StackOverflow:
Installing ImageMagick extension with php/windows
I answered this question some time ago. This solves the DLL mismatch error.