I installed XAMPP v3.2.2 and PHP Version 7.1.7
I have a php file as newcode1.php in C:/xampp/htdocs folder.
I opened chrome and entered the URL as http://localhost/newcode1.php, tried to run the php code then I got the page saying
Zend Guard Run-time support missing!
Please help me with the solution.
Verify the steps performed to "Download, install and configure Zend Guard Loader for PHP 5.6" as described in the CA SAM upgrade guide
(https://support.ca.com/phpdocs/7/8572/CA_SAM_Rel4_Upgrade_Manual.pdf)
Verify steps:
Download Zend Guard Loader for PHP 5.6 (you may have to register with Zend to download - http://www.zend.com/en/products/loader/downloads#Windows)
Add ZendLoader.dll from zip file to php extensions directory (c:\Program Files (x86)\ca\Sam\env\php\ext)
Add the following lines to php.ini (c:\Program Files (x86)\ca\Sam\env\php\php.ini):
[Zend]
zend_extension="C:\Program Files (x86)\ca\Sam\env\php\ext\ZendLoader.dll"
zend_loader.enable=1
zend_loader.disable_licensing=0
-Make sure the PATH environment variable contains an entry to PHP.exe e.g. \Program Files (x86)\PHP\v5.6;
-Verify PHP by running PHP.exe -v from the command line. It should return the following.
C:\Users\Administrator>php -v
Hope this is helpful :)
I won't be able to help you with this specific issue but I can say that php 7.1 will not work with zend loader because it's supported only up to v5.6. Please downgrade yout php to 5.6 and make sure that the build is nts (non thread safe) because thread safe will not work..
Although you have to run the php in fastcgi mode because all xampps come up with thread safe php
Related
I have been using a software which files are encoded by Zend Guard. Since PHP 5.3 + versions don't support Zend Optimizer hence I have to install Zend Guard Loader to run that application on my windows xampp installation.
I downloaded Zend guard loader and copied to xampp folder.Then I edited the following lines to php.ini file.
zend_extension ="E:\xampp\ZendGuardLoader\php-5.4.x\ZendLoader.dll"
zend_loader.enable=1
Then restarted the xampp but it was giving php5.dll missing error then I downloaded php5.dll file from internet and uploaded to xampp/php folder and edited following file
xampp\apache\conf\extra\httpd-xampp.conf here I edited this line
LoadFile "/xampp/php/php5ts.dll"
to
LoadFile "/xampp/php/php5.dll"
then the php5.dll error gone and the following error occurred:
"the procedure entry point zend_new_interned_string could not be located in the dynamic link library E:\xampp\ZendGuardLoader\php-5.4.x\ZendLoader.dll"
When I tried to search on internet then found that this is the issue with 'Thread Safety' is enabled in xampp php. I don't know how to disable 'Thread Safety' or how to use 'Non Thread Safety' php version with xampp.
Please help me to install Zend Guard Loader on Windows 8 os Xampp 1.8.1 with php 5.4.x
Before you waste any more time checking, see if phpinfo() output shows that Thread Safety is enabled or not.
Zend Extensions are NTS (non thread safe) so if it is enabled, it cannot load and you need NTS PHP to load Guard Loader extension.
And
Thread Safety cannot be disabled, it is a compilation flag and how the compiled binary works.
You need to load a different Apache PHP Module which is non-thread-safe (php.net releases both TS and NTS builds).
Take a look to
http://forums.zend.com/viewtopic.php?f=57&t=43013
So, I had this same issue.
XAMPP (as far as version 3.2.1) comes bundled with Thread Safe PHP compilation. This is php binaries are compiled using a flag to force "Tread Safe", so, it can't be switched back on the same binaries.
You need to change the binaries of XAMP for those Non Tread Safe (NTS) compiled.
I followed this guide for replacing PHP in XAMP to use NTS. The guide explains how to enable FastCGI and Zend OPcache, so if you copy paste the steps, you should have XAMP run PHP on FastCGI mode. The relevant steps are:
Identify the version of Apache server that is running. [..]
Download the latest PHP binaries for windows. Choose the non-thread-safe (you might choose a newer version of php) [...] Create a new folder for the new version of PHP (ex. c:\xampp\php56-nts ).
Edit the Apache configuration file (ex: c:\xampp\apache\apache\conf\extra\ httpd-xampp.conf ) and replace the paths in the php5 module configuration you may need to change the name of the .dll
As php binaries downloaded from php.net can be used for developpment or for production, you need to create a php.ini according to your needs (there are 2 templates in the folder you can use to begin with: php.ini-development and php.ini-production )
With this, basically you have XAMPP to run PHP's NTS version. Afther that, you can install Zend Guard Loader as the guide says. Basically:
Download the Zend Guard Loader binary
Locate the ZendLoader.dll file and paste it inside the library path of php for xampp. Get the path.
Configure php.ini to use ZendLoader; Add
zend_extension=< full_path_to_ZendLoader.dll>
zend_extension=< full_path_to_opcache.dll>
Add any other optional configuration. Restart Apache and it should restart with the NTS version of PHP. You can test this with localhost/xampp/phpinfo.php
I am trying to use iMagick in Symfony2.
I am using PHP 5.4.16 and all i have done :
1-Copy php_imagick_nts.dll from php5-4 directory from the extracted http://valokuva.org/~mikko/imagick-php54-php53.tgz to php/ext .
2-Rename it to php_imagick.dll and add the “extension=php_imagick.dll” to php.ini
3-Create a page like this :
<?php
$a = new Imagick();
?>
but i receive this :
Fatal error: Class ‘Imagick’ not found in C:\xampp\htdocs\info.php
When I tried to use this in a symfony controller, the error occur again:
FatalErrorException: Error: Class 'Imagick' not found
Unfortunately the details about imagick extension not appear in output of "phpinfo()"
Is this version is incompatible with PHP 5.4.16 ?! If yes,what version i must use? Where? Thank for any help...
After trying many solutions, none seemed to work.
I managed to install it on Windows 10 64-bit, Apache 2.4 and PHP 5.6, but I think it should work for all versions.
Hopefully you will have no problem installing Imagick for PHP.
Step 1) Gather information
First of all you should gather some information of your PHP environment.
You can easily see your PHP information with the function phpinfo()
The information you need:
Architecture: x86(32-bit) or x64(64-bit)
PHP-version: you can find this in the header of the phpinfo() output.
PHP Extension Build: This string contains 2 important parts:
NTS or TS
VCx (like VC11)
Loaded Configuration File: the path to your used php.ini file.
Step 2) Download Binary
You can download the binary from the official site of ImageMagick. I recommend you to read the small introduction under the "Windows Binary Release" to be certain which "bits-per-pixel" to choose from(8 or 16).
Downloading the latest version should be just fine.
Make sure this binary is the same architecture as your PHP architecture that you have gathered in step 1.
Step 3) Install Binary
Install the binary to your phpx.x.xx\bin file. For example: C:\wamp64\bin\php\php5.6.16\bin. (This can be any folder, but for the convenience I put in here)
Make sure "Add application directory to your system path" is checked. Should be checked by default though.
Step 4) Download PHP extension
The DLL PHP extension is available through the windows pecl php site
Again, you can just click the latest version.
Next of, choose the right version based on the gathered information.
For example: php_imagick-3.4.1-5.6-nts-vc11-x64.zip
This can be stripped into components:
php_imagick-3.4.1 - This is the php imagick extension with the version. This is not important.
5.6 - This is your PHP version and should be equal to the PHP-version you are using, which you have determed in step 1.
NTS - This should be equal to the information of your PHP Extension Build that you have gathered in step 1.
VC11 - This should also be equal to the information of your PHP Extension Build that you have gathered in step 1.
x64 - This the architecture of the extension and should be equal to your PHP architecture that you have gathered in step 1.
Step 5) Extract PHP Extension
After you have downloaded the file, you should open the .zip file and look for a file named: php_imagick.dll.
Extract this file to phpx.x.xx\ext.
Make sure the .dll file is fully accessable by you. Sometimes you need to explicity unblock the file.
Step 6) Activate PHP extension
To activate the extension in PHP, you should state in your php.ini file that you want to use this extension.
You have gathered the path to your used php.ini file in step 1.
Add the line extension=php_imagick.dll to your php.ini
Step 7) Restart your PC
Just to make sure, restart your PC so all Environment Paths will be correctly loaded.
This should install Imagick correctly with the latest versions and the right architecture.
Imagick should also be listed in phpinfo() with the appropriate "ImageMagick supported formats" (Just make sure it is not empty).
I spent many hours trying to make Imagick work, finally I got it.
My installation instructions
Install WAMP 32bit (even if you running 64bit system you must use 32bit version of WAMP)
Install ImageMagick to C:/imagemagick, use this file: https://www.dropbox.com/s/i2mhrhd7sp0ilzk/ImageMagick-6.8.0-3-Q16-windows-dll.exe
Put DLL with Imagick into extension folder of PHP, e.g. D:\wamp32\bin\php\php5.4.16\ext, I used this file: https://www.dropbox.com/s/ayankf850l08rm2/php_imagick.dll
In php.ini put line "SetEnv MAGICK_HOME C:/imagemagick" without quotes
Better restart PC
I use Wamp 2.4, PHP 5.4.16, Apache 2.4.4, ImageMagick 6.8.0-3 2012-10-24 Q16, Imagick 3.1.0RC2 - all 32bit, OS Win8 64bit
Now it should work and you should see Imagick extension loaded in phpinfo.
I tried a lot of versions of ImageMagick, but newer versions didn't work, 6.8.0-3-Q16-windows-dll works fine.
Symfony2
In Symfony2 use Imagick like this:
$im = new \Imagick('image.jpg');
I'm quite sure this is to do with not having the module loaded correctly or the .dll being placed in a improper location.
You can use PHP's internal function extension_loaded() to check prior to using the class,
<?php
/**
*
**/
if (!extension_loaded('Imagick')) {
//Load some error.
}
?>
That's a method you can check if the module is even being reconsigned by PHP at all.
PHP also provides a function to view your current extensions get_loaded_extensions():
<?php
/**
* Get an Array of current
* PHP extensions for debugging
**/
print_r( get_loaded_extensions() );
?>
Make sure you do:
Check your correct extension library folder location within your phpinfo()
Perform a hard restart of your xmapp/wamp server.
If you're on PHP 5.4 or upwards (Like yourself!), see site below for the updated binaries
After researching too, Imagick does seem to have trouble with PHP 5.3 or upwards; Download new DLL's from this site below (Unofficial):
http://www.peewit.fr/imagick/
Also found other StackOverFlow Articles that have the same problem:
Stackoverflow: Trying to get imagick running on PHP 5.4.3 at Windows x64
Alternatively you're able to use the GD extension to more or less accomplish some of the same functions you require. I do believe GD is a more widely supported module/extension in more recent versions of PHP.
For those using Windows 10 with PHP 7 the following might help:
determine whether your Windows is threadsafe (see the output of phpinfo()) and 32 or 64 bits.
This page contains matching sets for each php version and threadsafe and 32/64 settings. Download both the Imagick and the Imagemagick files.
Follow for Imagick the instructions at the bottom of that page.
For ImageMagick the instructions on that page are not correct. You can put the dll files anywhere but you need to refer to them with the MAGICK_HOME windows environment variable. You may need to reboot for the change of the environment to have effect.
I use :Wamp 2.4, PHP 5.4.16, Apache 2.4.4, ImageMagick 6.8.0-3 2012-10-24 Q16, Imagick 3.1.0RC2 - all 32bit, OS Win7 32bit
Instructions given by fmstoun worked for me perfectly.
Since I spent a lot of hours trying to make the dll work, I wanted to add on to steps given by fmstoun.
Do restart your PC.
Use the full path to the image, for example:
$image = new Imagick($_SERVER['DOCUMENT_ROOT'] . '/images/test.jpg');
Make sure your system environment has 1 single entry for : C:/imagemagick and no more environment variables for imagemagick. If any previous installations have the path, then remove those paths and restart your PC
Make sure http : / / localhost/ of wamp shows 'imagick' as loaded extension
If extension is loaded properly, it has to show up in phpinfo() also as:
imagick module | enabled
ImageMagick version|ImageMagick 6.8.0-3 2012-10-24 Q16 and some more information about imagemagick.
Considering the date of this post, the latest version of imagemagick provided on the official site is: ImageMagick-6.8.8-1-Q16-x86-dll.exe
which fails to load the extension (as seen in apache error logs after a restart).
Hence use the version mentioned by fmstoun.
Hope this answer saves couple of hours of effort and saves time required to go through around 15 SO questions on same topic and also different forums.
UPDATE for those 2019 also using WAMP, a much more simplier method of ImageMagick are as follows:
Go to https://mlocati.github.io/articles/php-windows-imagick.html.
Grab a copy of the .dll extension file of your appropriate setup, choose a "Threads Safe" version.
Grab the corresponding ImageMagick using the link on the same row and install it.
Copy only the .dll file to the extensions folder of your install of WAMP, usually C:\wamp\bin\apache2.4\ext\
Restart apache.
Hope this helps.
Sorry for my bad english:
1º Install Appserv
Filename: "appserv-win32-2.5.10.exe"
URL download: h*ttp://www.appservnetwork.com/ (without *)
Apache port: 8080
2º Download PHP 5.3(Apache 2.2 doesn't support superior)
Filename: "php-5.3.29-Win32-VC9-x86.zip"
How?: Thread Safe
URL Download: h*ttp://windows.php.net/download#php-5.6 (without *)
3º Stop Apache
4º Delete all contents in the folder "..\AppServ\php5"
5º Copy the zip contents to "..\AppServ\php5"
6º Add line
date.timezone = "America/Buenos_Aires" (This is my zone, find yours in php page)
to the "php.ini" in "c:\Windows\php.ini"
to avoid date error in PHP
7º Start Apache
=============================
IMAGIC(Once PHP 5.3 is installed)
1º Instalññ Image magic 6.7(Not superior, PHP 5.3 doesn't support)
Filename: "ImageMagick-6.7.9-9-Q16-windows-dll.exe"
URL download: http://ftp.icm.edu.pl/packages/ImageMagick/binaries/
2º Download Imagic
Filename: "php_imagick-3.1.2-5.3-ts-vc9-x86.zip"
URL download: http://windows.php.net/downloads/pecl/releases/imagick/3.1.2/
3º In the dir "php5/ext" add the file "php_imagick.dll" from the last zip download(other files doesn't care)
4º Add line
extension=php_imagick.dll
to the "php.ini" in "c:\Windows\php.ini"
5º Restart Apache
I need the MongoDB PHP driver on my CentOS 5.4 machine. My PHP version is 5.1.6. I downloaded the RPM and installed it. That created several files in /usr/bin directory. I copied
/usr/bin/mongo
to
/usr/lib/php/modules
which was what extension_dir showed on doing phpinfo();.
I also added
extension=mongo.so
in /etc/php.ini.
However on executing my PHP script, i still get
Mongo class not found.
What's going wrong here ?
Also, my phpinfo() shows PHP version 5.1.6 whereas running PHP from command line shows 5.3.3. Could anything be wrong with that ?
Thanks in advance.
You're saying your webserver and command line PHP report different versions. These are going to be installed in different locations, and their extensions are API incompatible with each other.
When you installed the php_mongo extension, it may have used the command line php to determine the directory to install the extension to.
Make sure you have the correct php_mongo for the php version of your webserver, and it is in the correct extensions directory. (get the directory from the php.ini returned by phpinfo())
I hope you realise PHP 5.1 is also many years out of date. Unless you have a specific reason to use a version that old, you should also look at upgrading to a more recent version.
Edit:
Just read your comment "I must also mention that /usr/bin/mongo is a binary executable file but its not having a .so extension. Im copying it as is to /usr/lib/php/modules"
No no no! :)
This is the mongo command line client. This is not the PHP extension!
You can run a find /* -name "mongo.so" to see where the installer put the file, this will probably also give you an indication of which version of PHP it was installed for.
It looks as though you are confusing the RPM-packages for the MongoDB server with the requirements to install the MongoDB PHP driver. The PHP driver provides access to the server from your PHP applications, and does not install any command line tools.
restart httpd !
yum service httpd restart
I am trying to compile the imagemagick (imagick) extension to use in a non-thread-safe environment on windows.
I am using PHP 5.3.10 and have set up Visual C++ express as my compiling environment.
The problem is that I am using a non-thread-safe version of PHP as a FCGI module in Apache 2.2.
Thus, my PHP is supplied with a php5.lib and not a php5ts.lib. I believe this is the reason why I am getting these errors:
imagick.obj : error LNK2019: unresolved external symbol __imp__tsrm_mutex_alloc referenced in function _zm_startup_imagick
I have only ever built and compiled things on linux, so am not too sure how to do this on a windows environment.
How can I compile the extension so that it is non-thread-safe?
I downloaded the threadsafe binary of PHP 5.3.10 to get a copy of php5ts.lib. I was then able to compile the extension.
I am guessing that setting the ZTS preprocessor directive to either 1 or 0 would cause the extension to compile as either threadsafe or non-thread-safe. (Not too sure about this, so if someone could let me know if this is correct or not, it would be much appreciated. :) )
I then set up a virtual machine running Windows 7 and installed the latest version of WAMP. Reason being that it used a threadsafe version of PHP.
I placed the dll in the ext folder in the PHP installation and enabled it in php.ini. However, even after trying both the ts and nts version in WAMP, I would get:
PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.3.10/ext/imagick.dll' - The specified module could not be found.
in Unknown on line 0
But the thing is that c:/wamp/bin/php/php5.3.10/ext/imagick.dll' does exist, and yes I have checked this a lot of times.
I then downgraded ImageMagick to 6.6.2-10-Q16, but still see the same problem.
The same issue occurs on my dev machine running a nts version of PHP 5.3.10 on Apache 2.2 (all installed manually).
Looks like I could be wrong regarding the ZTS preprocessor. If I set ZTS=0 and compile, using dependency walker on the compiled dll still shows that it requires php5ts.dll which is only present on threadsafe versions of PHP.
I did more tinkering with dependency walker and found that I had to statistically link to msvc100d.dll. I then removed ZTS in the preprocessor definition and was able to compile using php5.lib instead of php5ts.dll. I think this should get me a non-ts dll.
However, when loading the extension, I am still getting:
PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) 'imagick.dll' in Unknown on line 0
And errors from dependency walker:
Error: At least one module has an unresolved import due to a missing export function in an implicitly dependent module.
Error: Modules with different CPU types were found.
Warning: At least one delay-load dependency module was not found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module.
Installed visual c++ express 2008 and compiled using platform toolkit v90, but still facing the same issues.
Any tips appreciated :)
Solution Found! See my answer.
Got it! I hope this can help those compiling php extensions on windows in the future. What I have done is based on: https://wiki.php.net/internals/windows/stepbystepbuild
Note: I read an answer on this site that said compiling PHP extensions by itself on windows is unsupported. Based on my experiments yesterday, it seems to be a lot of work as well, so I am using the PHP build process.
The best way is to use the PHP build process.
Install Visual C++ Express 2008 (any version will do, but express is free) and Windows SDK 6.1 (note that we want the 6.1 version not anything older or newer).
Install the SVN client tools if you haven't done so and restart for your PATH variable to take effect.
Get the PHP SDK binary tools and extract it to C:\php-sdk.
Start the CMD Shell under Microsoft Windows SDK v6.1 in your start menu and run cd C:\php-sdk.
Run setenv /x86 /xp /release this creates a 32-bit release. You can use /x64 to build a 64-bit release (I have not tried this).
run bin\phpsdk_setvars.bat
run bin\phpsdk_buildtree.bat php53dev
Download the PHP source code and extract it to C:\php-sdk\php53dev\vc9\x86 so that you end up with C:\php-sdk\php53dev\vc9\x86\php5.3-xyz
Download the latest deps and extract everything to C:\php-sdk\php53dev\vc9\x86. You may be prompted to overwrite any existing folders, so press yes.
run cd C:\php-sdk\php53dev\vc9\x86
Check out the latest version of your extension from the svn repository: svn co http://svn.php.net/repository/pecl/imagick/trunk pecl/imagick I am checking out imagick here.
Install any dependencies. In my case, I need to install ImageMagick, so I downloaded the latest recommended windows binary. You will need to restart after installation to update your PATH variable, but you can do this after you have compiled. Make sure you install the C/C++ headers and includes as well.
Copy the contents of the includes directory from the ImageMagick install directory to C:\php-sdk\php53dev\vc9\x86\deps\include.
Copy the contents of the lib directory from the ImageMagick install directory to C:\php-sdk\php53dev\vc9\x86\deps\lib
Now, let's build: run cd C:\php-sdk\php53dev\vc9\x86\php5.3-xyz then buildconf then configure --help. Look at the help properly. It will show you all config flags and any avaliable extensions to enabled. In my case, since I added imagick, I had an option called --with-imagick
Run config: configure --enable-cli --with-imagick=shared --disable-zts If you want to build a non-thread-safe binary use --disable-zts, otherwise remove that configuration flag. I am not sure why, but sometimes extensions use the --with-myextension flag and sometimes --enable-myextension, so check configure --help for the flag to use. If you add =shared after the extension flag, it will be compiled as a separate DLL, which si what we want.
Compile: run nmake then nmake snap.
Done :) Check C:\php-sdk\php53dev\vc9\x86\php-5.3.10\Release (non-thread-safe) or C:\php-sdk\php53dev\vc9\x86\php-5.3.10\Release_TS (thread-safe). Your compiled binaries should be in there. The compiled extensions (pecl), should be in a ZIP file similiar to pecl-5.3.10-nts-Win32-VC9-x86.zip. Open this file and extract the extensio DLL to your ext folder in your PHP installation.
Enable the PHP extension and restart your webserver. Run phpinfo() and check that the extension is enabled.
If the extension does not work properly, make sure you reboot to update your PATH variable. In my case, I need to have the imagemagick install directory in my PATH variable.
???
Profit!
Is there a reason you need to compile? Why not download? It's usually much simpler/quicker on Windows.
VC6: http://www.sk89q.com/2010/03/vc6-windows-binaries-for-imagick-2-3-0/
VC9: http://valokuva.org/builds/
There don't seem to be any concise tutorials/walk throughs for installing ImageMagick on WAMP for use with PHP.
I've tried dozens of combinations of their binary releases with different php extension dll files. I can get imagemagick working fine from the command line, and I can get it to show as ticked in the WAMP extensions, but can't actually use it.
Has anyone come across a good guide for installing this ball ache piece of software?
I've followed http://www.knowledge-transfers.com/it/installing-imagemagick-on-windows-setup-imagick-on-php with no luck...
Update: this is what happens when I follow the steps in PHP farmer's answer on windows7. My php.ini is setup as follows:
extension_dir = "c:/wamp/bin/php/php5.3.0/ext/"
extension=php_imagick.dll
I reboot and get these two errors in this order
and here is the dll file where it should be:
I know this is old post but I spend my all day to make it work, so here are the steps that helped me:
Download ImageMagick Binary Release - http://www.imagemagick.org/script/download.php
Install in C:\imagemagick, on last step check "Add application directory to your system path"
Download Imagick DLL: PHP5.6.x version from http://www.peewit.fr/imagick/ (I have 5.6+ version installed on my localhost
Copy php_imagick.dll to C:\wamp\bin\php\ext
Download PHP 5.6 Thread Safe (TS) x86 version from http://pecl.php.net/package/imagick/3.1.2/windows
Copy CORE_RL_* files to C:\wamp\bin\apache\bin\
Edit php.ini file in C:\wamp\bin\apache\bin\php.ini, add extension=php_imagick.dll line in extensions section
Copy all files from C:\imagemagick\modules\coders and C:\imagemagick\modules\filters to C:\imagemagick to load ImageMagick supported formats
Go to Control Panel -> System -> Advanced Settings -> Environment Variables -> New System Variable -> MAGICK_HOME = C:\imagemagick
Restart Wamp server and check phpinfo() for imagick plugin
If last step does not work, restart Windows
I have improved fsasvari answer to cater general scenarios and versions. All credits to him.
Install Imagick in WAMP
Open your phpinfo() page
Check the below
PHP version (mine : 5.5.12)
Compiler (mine : MSVC11 (Visual C++ 2012) )
Architecture : (mine : x64)
Thread Safety : enabled
Loaded Configuration File (mine : C:\wamp\bin\apache\apache2.4.9\bin\php.ini)
extension_dir : (mine : c:/wamp/bin/php/php5.5.12/ext/)
Apache Bin (Not in phpinfo() page) : C:\wamp\bin\apache\apache2.4.9\bin\
Get the latest release match to your architecture from here (for me it was ImageMagick-x86_64-pc-windows.exe).
Copy all files from C:\imagemagick\modules\coders and C:\imagemagick\modules\filters to C:\imagemagick to load ImageMagick supported formats
Install in C:\imagemagick, on last step check "Add application directory to your system path"
Download the PECL matching to your architecture
http://pecl.php.net/package/imagick/3.1.2/windows
(for me : 5.5 Thread Safe (TS) x64)
Extract it and copy all the CORE_RL_* files to apache bin folder (mine : C:\wamp\bin\apache\apache2.4.9\bin)
Copy php_imagick.* files to extension dir (mine : c:/wamp/bin/php/php5.5.12/ext/)
Edit php.ini file (mine : C:\wamp\bin\apache\apache2.4.9\bin\php.ini)
add extension=php_imagick.dll line in extensions section
Go to Control Panel -> System -> Advanced Settings -> Environment Variables -> New System Variable -> MAGICK_HOME = C:\imagemagick
Restart Wamp server and check phpinfo() for imagick plugin
If last step does not work, restart Windows (Specially if you have previously installed imagemagick in different folder/version)
For WAMPSERVER 3.1.9 64bit, PHP Version: 7.3.5
I had a lot of trouble with this as well and some things I did wrong was that I doubted ImageMagick would load on my new php version. But you have to believe it will work and don't try with older php versions :)
So this was my approach, remember to follow it with your own settings and versions/folders.
Before you start, make sure you running the php version you want to run. If you installed Wampserver 3, you may click the wamp icon and go to php version and activate the one you want to run.
1
Get latest ImageMagick version for your system here: http://ftp.icm.edu.pl/packages/ImageMagick/binaries/
(I got the ImageMagick-x86_64-pc-windows.exe in the bottom)
2
Install ImageMagick in C:/imagemagick (I put it in lower cases),
You will be asked for some stuff during install, just make sure the path thingy is ticked.
You should also tick the convert thingy if it allows you.
Then after install you can run CMD and type convert -version to see if imagick is installed.
3
Run <?php phpinfo(); ?> And find out these settings:
PHP Version: 7.3.5
System: Windows
Compiler: MSVC15 (Visual C++ 2017) ([VC15])
Architecture: x64 (or maybe you have x86)
Thread Safety: enabled ([TS] else [NTS])
You probably have other settings, but you need to remember yours to download the proper php_imagick.dll
4
Get the php_imagick.dll you want for your php version from here: http://pecl.php.net/package/imagick
I got mine from here: http://pecl.php.net/package/imagick/3.4.4/windows for php 7.3
Remember your info from the phpinfo(), it has to match, else it won't work.
5
After you unzip it, copy the php_imagick.dll and paste it in C:/wamp64/bin/php/php7.3.5/ext/
Then copy all the other .dll files from that folder into C:/wamp64/bin/apache/apache2.4.39/bin/
Yes it's dirty but you will get it working like this.
6
Add extension=php_imagick.dll in C:/wamp64/bin/php/php7.3.5/phpForApache.ini
I added it after the other extensions in the file.
7
Restart all Wamp services.
If you been messing around earlier with installs, you might have to restart the computer due to some weird cache stuff.
8
Check phpinfo() again if imagick shows up and try something like $im = new Imagick();
9
Click the Wamp icon -> php -> extensions, php_imagick should be listed.
Good luck! :)
PHP 5.4 php_imagick.dll is here: http://www.peewit.fr/imagick/ .
I read somewhere that 64bit php doesnt work with php_imagick. That might be the case when you get this error in apache_error.log
PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.4.3/ext/php_imagick.dll' -
%1 is not a valid Win32 application.\r\n in Unknown on line 0
As mentioned above, it was also necessary to add this into httpd.conf (also, i read you cant have spaces/dashes/dots):
SetEnv MAGICK_HOME C:/imagemagick"
If you dont, you might get this error:
"PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.4.3/ext/php_imagick.dll' -
The specified procedure could not be found. in Unknown on line 0"
In the end, this article might partially help: http://www.elxsy.com/2009/07/installing-imagemagick-on-windows-and-using-with-php-imagick/
This was a headache for me as well, but unfortunately I installed this quite awhile ago. The instructions from that link you posted seem accurate. Have you ran phpinfo(); to see if it is installed in the Apache Environment? It should be listed as MAGICK_HOME.
Make sure "SetEnv MAGICK_HOME C:/imagemagick" is set at the end of your httpd.conf file. Assuming imagemagick is installed in that directory.
Be sure that you have the extension "php_imagick.dll" in your php.ini file as well.
It should work just fine if you have all those set.
On another note, here is a nice little library someone built to make imagick easier to use. https://github.com/francodacosta/phmagick
I hope that helps! Good luck!
I've never used WAMP but I have found that sometimes installing PHP extensions on Windows I need to ensure that any dll's that the extension relies on is in the Windows system PATH. If there is more than the one dll packaged with the imagemagick extension, try adding the directory that the dll's reside in to the Windows system PATH then REBOOT (to ensure that the web server gets a copy of the NEW environment).
I know this is an old question but i guess this will help someone someday out there....
If you are on WAMPP and have PHP 5.4.x installed , go here http://www.peewit.fr/imagick/
and download appropriate files as instructed. It will work.
Please see this answer already on StackOverflow:
Installing ImageMagick extension with php/windows
I answered this question some time ago. This solves the DLL mismatch error.