I have been using a software which files are encoded by Zend Guard. Since PHP 5.3 + versions don't support Zend Optimizer hence I have to install Zend Guard Loader to run that application on my windows xampp installation.
I downloaded Zend guard loader and copied to xampp folder.Then I edited the following lines to php.ini file.
zend_extension ="E:\xampp\ZendGuardLoader\php-5.4.x\ZendLoader.dll"
zend_loader.enable=1
Then restarted the xampp but it was giving php5.dll missing error then I downloaded php5.dll file from internet and uploaded to xampp/php folder and edited following file
xampp\apache\conf\extra\httpd-xampp.conf here I edited this line
LoadFile "/xampp/php/php5ts.dll"
to
LoadFile "/xampp/php/php5.dll"
then the php5.dll error gone and the following error occurred:
"the procedure entry point zend_new_interned_string could not be located in the dynamic link library E:\xampp\ZendGuardLoader\php-5.4.x\ZendLoader.dll"
When I tried to search on internet then found that this is the issue with 'Thread Safety' is enabled in xampp php. I don't know how to disable 'Thread Safety' or how to use 'Non Thread Safety' php version with xampp.
Please help me to install Zend Guard Loader on Windows 8 os Xampp 1.8.1 with php 5.4.x
Before you waste any more time checking, see if phpinfo() output shows that Thread Safety is enabled or not.
Zend Extensions are NTS (non thread safe) so if it is enabled, it cannot load and you need NTS PHP to load Guard Loader extension.
And
Thread Safety cannot be disabled, it is a compilation flag and how the compiled binary works.
You need to load a different Apache PHP Module which is non-thread-safe (php.net releases both TS and NTS builds).
Take a look to
http://forums.zend.com/viewtopic.php?f=57&t=43013
So, I had this same issue.
XAMPP (as far as version 3.2.1) comes bundled with Thread Safe PHP compilation. This is php binaries are compiled using a flag to force "Tread Safe", so, it can't be switched back on the same binaries.
You need to change the binaries of XAMP for those Non Tread Safe (NTS) compiled.
I followed this guide for replacing PHP in XAMP to use NTS. The guide explains how to enable FastCGI and Zend OPcache, so if you copy paste the steps, you should have XAMP run PHP on FastCGI mode. The relevant steps are:
Identify the version of Apache server that is running. [..]
Download the latest PHP binaries for windows. Choose the non-thread-safe (you might choose a newer version of php) [...] Create a new folder for the new version of PHP (ex. c:\xampp\php56-nts ).
Edit the Apache configuration file (ex: c:\xampp\apache\apache\conf\extra\ httpd-xampp.conf ) and replace the paths in the php5 module configuration you may need to change the name of the .dll
As php binaries downloaded from php.net can be used for developpment or for production, you need to create a php.ini according to your needs (there are 2 templates in the folder you can use to begin with: php.ini-development and php.ini-production )
With this, basically you have XAMPP to run PHP's NTS version. Afther that, you can install Zend Guard Loader as the guide says. Basically:
Download the Zend Guard Loader binary
Locate the ZendLoader.dll file and paste it inside the library path of php for xampp. Get the path.
Configure php.ini to use ZendLoader; Add
zend_extension=< full_path_to_ZendLoader.dll>
zend_extension=< full_path_to_opcache.dll>
Add any other optional configuration. Restart Apache and it should restart with the NTS version of PHP. You can test this with localhost/xampp/phpinfo.php
Related
I installed XAMPP v3.2.2 and PHP Version 7.1.7
I have a php file as newcode1.php in C:/xampp/htdocs folder.
I opened chrome and entered the URL as http://localhost/newcode1.php, tried to run the php code then I got the page saying
Zend Guard Run-time support missing!
Please help me with the solution.
Verify the steps performed to "Download, install and configure Zend Guard Loader for PHP 5.6" as described in the CA SAM upgrade guide
(https://support.ca.com/phpdocs/7/8572/CA_SAM_Rel4_Upgrade_Manual.pdf)
Verify steps:
Download Zend Guard Loader for PHP 5.6 (you may have to register with Zend to download - http://www.zend.com/en/products/loader/downloads#Windows)
Add ZendLoader.dll from zip file to php extensions directory (c:\Program Files (x86)\ca\Sam\env\php\ext)
Add the following lines to php.ini (c:\Program Files (x86)\ca\Sam\env\php\php.ini):
[Zend]
zend_extension="C:\Program Files (x86)\ca\Sam\env\php\ext\ZendLoader.dll"
zend_loader.enable=1
zend_loader.disable_licensing=0
-Make sure the PATH environment variable contains an entry to PHP.exe e.g. \Program Files (x86)\PHP\v5.6;
-Verify PHP by running PHP.exe -v from the command line. It should return the following.
C:\Users\Administrator>php -v
Hope this is helpful :)
I won't be able to help you with this specific issue but I can say that php 7.1 will not work with zend loader because it's supported only up to v5.6. Please downgrade yout php to 5.6 and make sure that the build is nts (non thread safe) because thread safe will not work..
Although you have to run the php in fastcgi mode because all xampps come up with thread safe php
I am using magic library to change the resolution of the images. But I am getting following error when I am running the Wamp.
I am also sharing links of the website I have followed.
Link
http://www.zoharbabin.com/5-steps-to-get-imagemagick-on-xampp-1-7-3/
These are step by step instructions on how to get ImageMagick running under PHP in a Windows environment. Apache does not provide binaries for Windows and relies upon several sources to do so:
XAMPP
WampServer
Apache Lounge
Bitnami
Apache Haus
It is recommended to download either the XAMPP or WampServer distributions as they are complete packages that contain Apache HTTP server, PHP and MySql known and tested to work together.
Making ImageMagick work was not easy for me. It took two days of trial and error to get this to work. Hopefully this will help you get up and running faster. I have this running on the following:
Windows 7 Home Edition 64-bit
XAMPP 5.6.3
Apache HTTP 2.4.10 (Win32), VC 11
PHP 5.6.3 x86 VC 11, Thread safe
Thus, a 32-bit web framework compiled with VC 11 and thread safety enabled all running on 64-bit Windows 7. You must choose a 32-bit ImageMagick DLL distribution along with a 32-bit VC11 thread safe DLL wrapper to match.
The instructions below should work equally well with WampServer as there is no dependency on the Windows web framework.
The important thing to understand here is that you must know your web server environment and what components are installed and built with. you must match bitness, Visual C runtime, and thread safety configurations together.
Step #1: Install imageMagick to C:\ImageMagick
Go to Link and download the latest release. Use the 32 bit DLL version (ImageMagick-6.9.0.0-Q16-x86-dll.exe)
Install it into C:\ImageMagick directory
Step #2: Get the PHP wrapper from the Windows PECL repository
Go to http://pecl.php.net/package/imagick
Get the latest stable version, 3.1.2. You want the 32-bit, VC 11, thread safe version
php_imagick-3.1.2-5.6-ts-vc11-x86.zip
Step #3: Create distribution directory
Create a /php/ext/imagemagick directory
Copy the ZIP into it and unzip it
Step #4: Make backup copy of DLLs
Make a C:\ImageMagick\Backup directory
Copy DLLs in the C:\ImageMagick directory to the C:\ImageMagick\Backup directory
Step #5: Overwrite DLLs
This is the most important step that if you don't do, will result in the PHP wrapper not loading correctly:
Take all the DLL files in \php\ext\ImageMagick and overwrite those in C:\ImageMagick
If you do a SET on the DOS command line you will see that the ImageMagick installer had created a entry into the system variable environment path (i.e. to C:\ImageMagick). Supporting DLLs will be picked up from there and they will be the Pecl Windows repository DLLs, not the distribution.
Step #6: Set module extension in PHP.INI
First, copy the php extension wrapper php_imagick.dll into the /php/ext directory. Then modify the PHP.INI to do this:
extension=php_imagick.dll
Step #7: Reboot Apache
Reboot Apache
Go to phpinfo and see that imagick is installed as a module.
Here's where you can learn more about your environment.
Pay attention to stuff in phpinfo like:
Compiler: MSVC11 (Visual C++ 2012)
Architecture: x86 (32 bit; as opposed to x64 which is 64 bit)
Thread safety: enabled (TS)
Apache Environment Configuration (PATH should have C:\ImageMagick included)
More gory details: Installing ImageMagick with PHP and Windows
I'm trying to install zend guard loader run time on windows 7 OS, with XAMP-win32-1.7.4-VC9-installer, (with: php 5.3 and apache 2.0). we also
downloaded ZendGuardLoader-php-5.3-Windows and followed installation instruction by adding this line on our php.ini file under
zend_extension=<full_path_to_ZendLoader.dll>
zend_loader.enable = 1![enter image description here][1]
the real path is
zend_extension="C:\xampp\php\ext\ZendLoader.dll"
zend_loader.enable = 1
however, after restarting xampp apache zend guard loader seems not to be loaded properly (see attached screen shots for your reference)
how can i solve it ?
thanks to all
It may help :
http://forums.zend.com/viewtopic.php?f=57&t=43013
It seems that Zend can't run with PHP when PHP Thread Safety is enabled.
I am trying to compile the imagemagick (imagick) extension to use in a non-thread-safe environment on windows.
I am using PHP 5.3.10 and have set up Visual C++ express as my compiling environment.
The problem is that I am using a non-thread-safe version of PHP as a FCGI module in Apache 2.2.
Thus, my PHP is supplied with a php5.lib and not a php5ts.lib. I believe this is the reason why I am getting these errors:
imagick.obj : error LNK2019: unresolved external symbol __imp__tsrm_mutex_alloc referenced in function _zm_startup_imagick
I have only ever built and compiled things on linux, so am not too sure how to do this on a windows environment.
How can I compile the extension so that it is non-thread-safe?
I downloaded the threadsafe binary of PHP 5.3.10 to get a copy of php5ts.lib. I was then able to compile the extension.
I am guessing that setting the ZTS preprocessor directive to either 1 or 0 would cause the extension to compile as either threadsafe or non-thread-safe. (Not too sure about this, so if someone could let me know if this is correct or not, it would be much appreciated. :) )
I then set up a virtual machine running Windows 7 and installed the latest version of WAMP. Reason being that it used a threadsafe version of PHP.
I placed the dll in the ext folder in the PHP installation and enabled it in php.ini. However, even after trying both the ts and nts version in WAMP, I would get:
PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.3.10/ext/imagick.dll' - The specified module could not be found.
in Unknown on line 0
But the thing is that c:/wamp/bin/php/php5.3.10/ext/imagick.dll' does exist, and yes I have checked this a lot of times.
I then downgraded ImageMagick to 6.6.2-10-Q16, but still see the same problem.
The same issue occurs on my dev machine running a nts version of PHP 5.3.10 on Apache 2.2 (all installed manually).
Looks like I could be wrong regarding the ZTS preprocessor. If I set ZTS=0 and compile, using dependency walker on the compiled dll still shows that it requires php5ts.dll which is only present on threadsafe versions of PHP.
I did more tinkering with dependency walker and found that I had to statistically link to msvc100d.dll. I then removed ZTS in the preprocessor definition and was able to compile using php5.lib instead of php5ts.dll. I think this should get me a non-ts dll.
However, when loading the extension, I am still getting:
PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) 'imagick.dll' in Unknown on line 0
And errors from dependency walker:
Error: At least one module has an unresolved import due to a missing export function in an implicitly dependent module.
Error: Modules with different CPU types were found.
Warning: At least one delay-load dependency module was not found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module.
Installed visual c++ express 2008 and compiled using platform toolkit v90, but still facing the same issues.
Any tips appreciated :)
Solution Found! See my answer.
Got it! I hope this can help those compiling php extensions on windows in the future. What I have done is based on: https://wiki.php.net/internals/windows/stepbystepbuild
Note: I read an answer on this site that said compiling PHP extensions by itself on windows is unsupported. Based on my experiments yesterday, it seems to be a lot of work as well, so I am using the PHP build process.
The best way is to use the PHP build process.
Install Visual C++ Express 2008 (any version will do, but express is free) and Windows SDK 6.1 (note that we want the 6.1 version not anything older or newer).
Install the SVN client tools if you haven't done so and restart for your PATH variable to take effect.
Get the PHP SDK binary tools and extract it to C:\php-sdk.
Start the CMD Shell under Microsoft Windows SDK v6.1 in your start menu and run cd C:\php-sdk.
Run setenv /x86 /xp /release this creates a 32-bit release. You can use /x64 to build a 64-bit release (I have not tried this).
run bin\phpsdk_setvars.bat
run bin\phpsdk_buildtree.bat php53dev
Download the PHP source code and extract it to C:\php-sdk\php53dev\vc9\x86 so that you end up with C:\php-sdk\php53dev\vc9\x86\php5.3-xyz
Download the latest deps and extract everything to C:\php-sdk\php53dev\vc9\x86. You may be prompted to overwrite any existing folders, so press yes.
run cd C:\php-sdk\php53dev\vc9\x86
Check out the latest version of your extension from the svn repository: svn co http://svn.php.net/repository/pecl/imagick/trunk pecl/imagick I am checking out imagick here.
Install any dependencies. In my case, I need to install ImageMagick, so I downloaded the latest recommended windows binary. You will need to restart after installation to update your PATH variable, but you can do this after you have compiled. Make sure you install the C/C++ headers and includes as well.
Copy the contents of the includes directory from the ImageMagick install directory to C:\php-sdk\php53dev\vc9\x86\deps\include.
Copy the contents of the lib directory from the ImageMagick install directory to C:\php-sdk\php53dev\vc9\x86\deps\lib
Now, let's build: run cd C:\php-sdk\php53dev\vc9\x86\php5.3-xyz then buildconf then configure --help. Look at the help properly. It will show you all config flags and any avaliable extensions to enabled. In my case, since I added imagick, I had an option called --with-imagick
Run config: configure --enable-cli --with-imagick=shared --disable-zts If you want to build a non-thread-safe binary use --disable-zts, otherwise remove that configuration flag. I am not sure why, but sometimes extensions use the --with-myextension flag and sometimes --enable-myextension, so check configure --help for the flag to use. If you add =shared after the extension flag, it will be compiled as a separate DLL, which si what we want.
Compile: run nmake then nmake snap.
Done :) Check C:\php-sdk\php53dev\vc9\x86\php-5.3.10\Release (non-thread-safe) or C:\php-sdk\php53dev\vc9\x86\php-5.3.10\Release_TS (thread-safe). Your compiled binaries should be in there. The compiled extensions (pecl), should be in a ZIP file similiar to pecl-5.3.10-nts-Win32-VC9-x86.zip. Open this file and extract the extensio DLL to your ext folder in your PHP installation.
Enable the PHP extension and restart your webserver. Run phpinfo() and check that the extension is enabled.
If the extension does not work properly, make sure you reboot to update your PATH variable. In my case, I need to have the imagemagick install directory in my PATH variable.
???
Profit!
Is there a reason you need to compile? Why not download? It's usually much simpler/quicker on Windows.
VC6: http://www.sk89q.com/2010/03/vc6-windows-binaries-for-imagick-2-3-0/
VC9: http://valokuva.org/builds/
There don't seem to be any concise tutorials/walk throughs for installing ImageMagick on WAMP for use with PHP.
I've tried dozens of combinations of their binary releases with different php extension dll files. I can get imagemagick working fine from the command line, and I can get it to show as ticked in the WAMP extensions, but can't actually use it.
Has anyone come across a good guide for installing this ball ache piece of software?
I've followed http://www.knowledge-transfers.com/it/installing-imagemagick-on-windows-setup-imagick-on-php with no luck...
Update: this is what happens when I follow the steps in PHP farmer's answer on windows7. My php.ini is setup as follows:
extension_dir = "c:/wamp/bin/php/php5.3.0/ext/"
extension=php_imagick.dll
I reboot and get these two errors in this order
and here is the dll file where it should be:
I know this is old post but I spend my all day to make it work, so here are the steps that helped me:
Download ImageMagick Binary Release - http://www.imagemagick.org/script/download.php
Install in C:\imagemagick, on last step check "Add application directory to your system path"
Download Imagick DLL: PHP5.6.x version from http://www.peewit.fr/imagick/ (I have 5.6+ version installed on my localhost
Copy php_imagick.dll to C:\wamp\bin\php\ext
Download PHP 5.6 Thread Safe (TS) x86 version from http://pecl.php.net/package/imagick/3.1.2/windows
Copy CORE_RL_* files to C:\wamp\bin\apache\bin\
Edit php.ini file in C:\wamp\bin\apache\bin\php.ini, add extension=php_imagick.dll line in extensions section
Copy all files from C:\imagemagick\modules\coders and C:\imagemagick\modules\filters to C:\imagemagick to load ImageMagick supported formats
Go to Control Panel -> System -> Advanced Settings -> Environment Variables -> New System Variable -> MAGICK_HOME = C:\imagemagick
Restart Wamp server and check phpinfo() for imagick plugin
If last step does not work, restart Windows
I have improved fsasvari answer to cater general scenarios and versions. All credits to him.
Install Imagick in WAMP
Open your phpinfo() page
Check the below
PHP version (mine : 5.5.12)
Compiler (mine : MSVC11 (Visual C++ 2012) )
Architecture : (mine : x64)
Thread Safety : enabled
Loaded Configuration File (mine : C:\wamp\bin\apache\apache2.4.9\bin\php.ini)
extension_dir : (mine : c:/wamp/bin/php/php5.5.12/ext/)
Apache Bin (Not in phpinfo() page) : C:\wamp\bin\apache\apache2.4.9\bin\
Get the latest release match to your architecture from here (for me it was ImageMagick-x86_64-pc-windows.exe).
Copy all files from C:\imagemagick\modules\coders and C:\imagemagick\modules\filters to C:\imagemagick to load ImageMagick supported formats
Install in C:\imagemagick, on last step check "Add application directory to your system path"
Download the PECL matching to your architecture
http://pecl.php.net/package/imagick/3.1.2/windows
(for me : 5.5 Thread Safe (TS) x64)
Extract it and copy all the CORE_RL_* files to apache bin folder (mine : C:\wamp\bin\apache\apache2.4.9\bin)
Copy php_imagick.* files to extension dir (mine : c:/wamp/bin/php/php5.5.12/ext/)
Edit php.ini file (mine : C:\wamp\bin\apache\apache2.4.9\bin\php.ini)
add extension=php_imagick.dll line in extensions section
Go to Control Panel -> System -> Advanced Settings -> Environment Variables -> New System Variable -> MAGICK_HOME = C:\imagemagick
Restart Wamp server and check phpinfo() for imagick plugin
If last step does not work, restart Windows (Specially if you have previously installed imagemagick in different folder/version)
For WAMPSERVER 3.1.9 64bit, PHP Version: 7.3.5
I had a lot of trouble with this as well and some things I did wrong was that I doubted ImageMagick would load on my new php version. But you have to believe it will work and don't try with older php versions :)
So this was my approach, remember to follow it with your own settings and versions/folders.
Before you start, make sure you running the php version you want to run. If you installed Wampserver 3, you may click the wamp icon and go to php version and activate the one you want to run.
1
Get latest ImageMagick version for your system here: http://ftp.icm.edu.pl/packages/ImageMagick/binaries/
(I got the ImageMagick-x86_64-pc-windows.exe in the bottom)
2
Install ImageMagick in C:/imagemagick (I put it in lower cases),
You will be asked for some stuff during install, just make sure the path thingy is ticked.
You should also tick the convert thingy if it allows you.
Then after install you can run CMD and type convert -version to see if imagick is installed.
3
Run <?php phpinfo(); ?> And find out these settings:
PHP Version: 7.3.5
System: Windows
Compiler: MSVC15 (Visual C++ 2017) ([VC15])
Architecture: x64 (or maybe you have x86)
Thread Safety: enabled ([TS] else [NTS])
You probably have other settings, but you need to remember yours to download the proper php_imagick.dll
4
Get the php_imagick.dll you want for your php version from here: http://pecl.php.net/package/imagick
I got mine from here: http://pecl.php.net/package/imagick/3.4.4/windows for php 7.3
Remember your info from the phpinfo(), it has to match, else it won't work.
5
After you unzip it, copy the php_imagick.dll and paste it in C:/wamp64/bin/php/php7.3.5/ext/
Then copy all the other .dll files from that folder into C:/wamp64/bin/apache/apache2.4.39/bin/
Yes it's dirty but you will get it working like this.
6
Add extension=php_imagick.dll in C:/wamp64/bin/php/php7.3.5/phpForApache.ini
I added it after the other extensions in the file.
7
Restart all Wamp services.
If you been messing around earlier with installs, you might have to restart the computer due to some weird cache stuff.
8
Check phpinfo() again if imagick shows up and try something like $im = new Imagick();
9
Click the Wamp icon -> php -> extensions, php_imagick should be listed.
Good luck! :)
PHP 5.4 php_imagick.dll is here: http://www.peewit.fr/imagick/ .
I read somewhere that 64bit php doesnt work with php_imagick. That might be the case when you get this error in apache_error.log
PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.4.3/ext/php_imagick.dll' -
%1 is not a valid Win32 application.\r\n in Unknown on line 0
As mentioned above, it was also necessary to add this into httpd.conf (also, i read you cant have spaces/dashes/dots):
SetEnv MAGICK_HOME C:/imagemagick"
If you dont, you might get this error:
"PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.4.3/ext/php_imagick.dll' -
The specified procedure could not be found. in Unknown on line 0"
In the end, this article might partially help: http://www.elxsy.com/2009/07/installing-imagemagick-on-windows-and-using-with-php-imagick/
This was a headache for me as well, but unfortunately I installed this quite awhile ago. The instructions from that link you posted seem accurate. Have you ran phpinfo(); to see if it is installed in the Apache Environment? It should be listed as MAGICK_HOME.
Make sure "SetEnv MAGICK_HOME C:/imagemagick" is set at the end of your httpd.conf file. Assuming imagemagick is installed in that directory.
Be sure that you have the extension "php_imagick.dll" in your php.ini file as well.
It should work just fine if you have all those set.
On another note, here is a nice little library someone built to make imagick easier to use. https://github.com/francodacosta/phmagick
I hope that helps! Good luck!
I've never used WAMP but I have found that sometimes installing PHP extensions on Windows I need to ensure that any dll's that the extension relies on is in the Windows system PATH. If there is more than the one dll packaged with the imagemagick extension, try adding the directory that the dll's reside in to the Windows system PATH then REBOOT (to ensure that the web server gets a copy of the NEW environment).
I know this is an old question but i guess this will help someone someday out there....
If you are on WAMPP and have PHP 5.4.x installed , go here http://www.peewit.fr/imagick/
and download appropriate files as instructed. It will work.
Please see this answer already on StackOverflow:
Installing ImageMagick extension with php/windows
I answered this question some time ago. This solves the DLL mismatch error.