Imagick php windows - php

Question

I am trying to use iMagick in Symfony2.
I am using PHP 5.4.16 and all i have done :
1-Copy php_imagick_nts.dll from php5-4 directory from the extracted http://valokuva.org/~mikko/imagick-php54-php53.tgz to php/ext .
2-Rename it to php_imagick.dll and add the “extension=php_imagick.dll” to php.ini
3-Create a page like this :
<?php
$a = new Imagick();
?>
but i receive this :
Fatal error: Class ‘Imagick’ not found in C:\xampp\htdocs\info.php
When I tried to use this in a symfony controller, the error occur again:
FatalErrorException: Error: Class 'Imagick' not found
Unfortunately the details about imagick extension not appear in output of "phpinfo()"
Is this version is incompatible with PHP 5.4.16 ?! If yes,what version i must use? Where? Thank for any help...

Answer 1

After trying many solutions, none seemed to work.
I managed to install it on Windows 10 64-bit, Apache 2.4 and PHP 5.6, but I think it should work for all versions.
Hopefully you will have no problem installing Imagick for PHP.
Step 1) Gather information
First of all you should gather some information of your PHP environment.
You can easily see your PHP information with the function phpinfo()
The information you need:
Architecture: x86(32-bit) or x64(64-bit)
PHP-version: you can find this in the header of the phpinfo() output.
PHP Extension Build: This string contains 2 important parts:
NTS or TS
VCx (like VC11)
Loaded Configuration File: the path to your used php.ini file.
Step 2) Download Binary
You can download the binary from the official site of ImageMagick. I recommend you to read the small introduction under the "Windows Binary Release" to be certain which "bits-per-pixel" to choose from(8 or 16).
Downloading the latest version should be just fine.
Make sure this binary is the same architecture as your PHP architecture that you have gathered in step 1.
Step 3) Install Binary
Install the binary to your phpx.x.xx\bin file. For example: C:\wamp64\bin\php\php5.6.16\bin. (This can be any folder, but for the convenience I put in here)
Make sure "Add application directory to your system path" is checked. Should be checked by default though.
Step 4) Download PHP extension
The DLL PHP extension is available through the windows pecl php site
Again, you can just click the latest version.
Next of, choose the right version based on the gathered information.
For example: php_imagick-3.4.1-5.6-nts-vc11-x64.zip
This can be stripped into components:
php_imagick-3.4.1 - This is the php imagick extension with the version. This is not important.
5.6 - This is your PHP version and should be equal to the PHP-version you are using, which you have determed in step 1.
NTS - This should be equal to the information of your PHP Extension Build that you have gathered in step 1.
VC11 - This should also be equal to the information of your PHP Extension Build that you have gathered in step 1.
x64 - This the architecture of the extension and should be equal to your PHP architecture that you have gathered in step 1.
Step 5) Extract PHP Extension
After you have downloaded the file, you should open the .zip file and look for a file named: php_imagick.dll.
Extract this file to phpx.x.xx\ext.
Make sure the .dll file is fully accessable by you. Sometimes you need to explicity unblock the file.
Step 6) Activate PHP extension
To activate the extension in PHP, you should state in your php.ini file that you want to use this extension.
You have gathered the path to your used php.ini file in step 1.
Add the line extension=php_imagick.dll to your php.ini
Step 7) Restart your PC
Just to make sure, restart your PC so all Environment Paths will be correctly loaded.
This should install Imagick correctly with the latest versions and the right architecture.
Imagick should also be listed in phpinfo() with the appropriate "ImageMagick supported formats" (Just make sure it is not empty).

Answer 2

I spent many hours trying to make Imagick work, finally I got it.
My installation instructions
Install WAMP 32bit (even if you running 64bit system you must use 32bit version of WAMP)
Install ImageMagick to C:/imagemagick, use this file: https://www.dropbox.com/s/i2mhrhd7sp0ilzk/ImageMagick-6.8.0-3-Q16-windows-dll.exe
Put DLL with Imagick into extension folder of PHP, e.g. D:\wamp32\bin\php\php5.4.16\ext, I used this file: https://www.dropbox.com/s/ayankf850l08rm2/php_imagick.dll
In php.ini put line "SetEnv MAGICK_HOME C:/imagemagick" without quotes
Better restart PC
I use Wamp 2.4, PHP 5.4.16, Apache 2.4.4, ImageMagick 6.8.0-3 2012-10-24 Q16, Imagick 3.1.0RC2 - all 32bit, OS Win8 64bit
Now it should work and you should see Imagick extension loaded in phpinfo.
I tried a lot of versions of ImageMagick, but newer versions didn't work, 6.8.0-3-Q16-windows-dll works fine.
Symfony2
In Symfony2 use Imagick like this:
$im = new \Imagick('image.jpg');

Answer 3

I'm quite sure this is to do with not having the module loaded correctly or the .dll being placed in a improper location.
You can use PHP's internal function extension_loaded() to check prior to using the class,
<?php
/**
*
**/
if (!extension_loaded('Imagick')) {
//Load some error.
}
?>
That's a method you can check if the module is even being reconsigned by PHP at all.
PHP also provides a function to view your current extensions get_loaded_extensions():
<?php
/**
* Get an Array of current
* PHP extensions for debugging
**/
print_r( get_loaded_extensions() );
?>
Make sure you do:
Check your correct extension library folder location within your phpinfo()
Perform a hard restart of your xmapp/wamp server.
If you're on PHP 5.4 or upwards (Like yourself!), see site below for the updated binaries
After researching too, Imagick does seem to have trouble with PHP 5.3 or upwards; Download new DLL's from this site below (Unofficial):
http://www.peewit.fr/imagick/
Also found other StackOverFlow Articles that have the same problem:
Stackoverflow: Trying to get imagick running on PHP 5.4.3 at Windows x64
Alternatively you're able to use the GD extension to more or less accomplish some of the same functions you require. I do believe GD is a more widely supported module/extension in more recent versions of PHP.

Answer 4

For those using Windows 10 with PHP 7 the following might help:
determine whether your Windows is threadsafe (see the output of phpinfo()) and 32 or 64 bits.
This page contains matching sets for each php version and threadsafe and 32/64 settings. Download both the Imagick and the Imagemagick files.
Follow for Imagick the instructions at the bottom of that page.
For ImageMagick the instructions on that page are not correct. You can put the dll files anywhere but you need to refer to them with the MAGICK_HOME windows environment variable. You may need to reboot for the change of the environment to have effect.

Answer 5

I use :Wamp 2.4, PHP 5.4.16, Apache 2.4.4, ImageMagick 6.8.0-3 2012-10-24 Q16, Imagick 3.1.0RC2 - all 32bit, OS Win7 32bit
Instructions given by fmstoun worked for me perfectly.
Since I spent a lot of hours trying to make the dll work, I wanted to add on to steps given by fmstoun.
Do restart your PC.
Use the full path to the image, for example:
$image = new Imagick($_SERVER['DOCUMENT_ROOT'] . '/images/test.jpg');
Make sure your system environment has 1 single entry for : C:/imagemagick and no more environment variables for imagemagick. If any previous installations have the path, then remove those paths and restart your PC
Make sure http : / / localhost/ of wamp shows 'imagick' as loaded extension
If extension is loaded properly, it has to show up in phpinfo() also as:
imagick module | enabled
ImageMagick version|ImageMagick 6.8.0-3 2012-10-24 Q16 and some more information about imagemagick.
Considering the date of this post, the latest version of imagemagick provided on the official site is: ImageMagick-6.8.8-1-Q16-x86-dll.exe
which fails to load the extension (as seen in apache error logs after a restart).
Hence use the version mentioned by fmstoun.
Hope this answer saves couple of hours of effort and saves time required to go through around 15 SO questions on same topic and also different forums.

Answer 6

UPDATE for those 2019 also using WAMP, a much more simplier method of ImageMagick are as follows:
Go to https://mlocati.github.io/articles/php-windows-imagick.html.
Grab a copy of the .dll extension file of your appropriate setup, choose a "Threads Safe" version.
Grab the corresponding ImageMagick using the link on the same row and install it.
Copy only the .dll file to the extensions folder of your install of WAMP, usually C:\wamp\bin\apache2.4\ext\
Restart apache.
Hope this helps.

Answer 7

Sorry for my bad english:
1º Install Appserv
Filename: "appserv-win32-2.5.10.exe"
URL download: h*ttp://www.appservnetwork.com/ (without *)
Apache port: 8080
2º Download PHP 5.3(Apache 2.2 doesn't support superior)
Filename: "php-5.3.29-Win32-VC9-x86.zip"
How?: Thread Safe
URL Download: h*ttp://windows.php.net/download#php-5.6 (without *)
3º Stop Apache
4º Delete all contents in the folder "..\AppServ\php5"
5º Copy the zip contents to "..\AppServ\php5"
6º Add line
date.timezone = "America/Buenos_Aires" (This is my zone, find yours in php page)
to the "php.ini" in "c:\Windows\php.ini"
to avoid date error in PHP
7º Start Apache
=============================
IMAGIC(Once PHP 5.3 is installed)
1º Instalññ Image magic 6.7(Not superior, PHP 5.3 doesn't support)
Filename: "ImageMagick-6.7.9-9-Q16-windows-dll.exe"
URL download: http://ftp.icm.edu.pl/packages/ImageMagick/binaries/
2º Download Imagic
Filename: "php_imagick-3.1.2-5.3-ts-vc9-x86.zip"
URL download: http://windows.php.net/downloads/pecl/releases/imagick/3.1.2/
3º In the dir "php5/ext" add the file "php_imagick.dll" from the last zip download(other files doesn't care)
4º Add line
extension=php_imagick.dll
to the "php.ini" in "c:\Windows\php.ini"
5º Restart Apache