I downloaded the Aptana_Studio_Setup_Linux.zip package, unpacked it and run ./AptanaStudio. It starts fine, but reports one problem:
The embedded browser widget for this editor cannot be created. It is either not available for your operating system or the system needs to be configured in order to support embedded browser.
After that, it opens the "Welcome page" in external browser (Mozilla), but when I click on a link to install PHP support it does not open the destination target. No wonder, because the link is in format: com.aptana....etc. I.e. written in reverse. I assume such links only work with internal browser.
If I look into details, I get these error messages:
No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)]
org.eclipse.swt.SWTError: No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)]
at org.eclipse.swt.SWT.error(SWT.java:3400)
at org.eclipse.swt.browser.Browser.<init>(Browser.java:138)
at org.eclipse.ui.internal.browser.BrowserViewer.<init>(BrowserViewer.java:224)
at org.eclipse.ui.internal.browser.WebBrowserEditor.createPartControl(WebBrowserEditor.java:78)
at com.aptana.ide.intro.browser.CoreBrowserEditor.createPartControl(CoreBrowserEditor.java:138)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:596)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:372)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:566)
at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:290)
etc. I hope this is enough.
I tried to set the env. variable:
export MOZILLA_FIVE_HOME=/usr/lib/mozilla/
However, it only changes the error message to:
No more handles [NS_InitEmbedding /usr/lib/mozilla/ error -2147221164]
org.eclipse.swt.SWTError: No more handles [NS_InitEmbedding /usr/lib/mozilla/ error -2147221164]
at org.eclipse.swt.SWT.error(SWT.java:3400)
at org.eclipse.swt.browser.Browser.<init>(Browser.java:225)
at org.eclipse.ui.internal.browser.BrowserViewer.<init>(BrowserViewer.java:224)
at org.eclipse.ui.internal.browser.WebBrowserEditor.createPartControl(WebBrowserEditor.java:78)
at com.aptana.ide.intro.browser.CoreBrowserEditor.createPartControl(CoreBrowserEditor.java:138)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:596)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:372)
For start I really want to have PHP working, but I'd also like to fix the whole internal browser issue in the end.
I happened to come across this: https://groups.google.com/forum/#!msg/xmind/5SjPTy0MmEo/PbPi0OGzqPwJ
Which advised running:
sudo apt-get install libwebkitgtk-1.0-0
should solve the problem. It worked for me so I figured I'd share here.
FWIW, I ended up here while trying to get the Play! Framework working on Ubuntu 13.04. using the Scala-IDE. So far, everything seems to be working...
You need to download and install XULRunner from mozilla.org, and point MOZILLA_FIVE_HOME to that directory.
After installing xulrunner you need to set this:
MOZILLA_FIVE_HOME=/usr/lib/xulrunner
You will have to install XULRunner then edit the eclipse.ini.
After installing xulrunner, adding the following line in the eclipse.ini solved the problem of "No more handles" issue.
-Dorg.eclipse.swt.browser.XULRunnerPath=/opt/eclipse/xulrunner/
I am using eclipse 3.63 and ubuntu 12.04.
Edit: getting internal browser to work is NOT required in order to get PHP support in Aptana. Just install PHP support from Help, Software updates menu.
If this is the problem I think you're having, just installing Firefox 2 (alongside FF3) should fix the issue. It happens because Aptana can only use FF2 at the moment. Hopefully they'll fix this soon.
If you're on Ubuntu, it's really just a case of:
sudo apt-get install firefox-2
Naturally, the process will vary on different distributions.
Related
I am trying to install XAMPP so that I can work it with PHP. But I have failed to open it, however I realised that other people downloading it, it comes as a dmg extension but mine comes as a bz2 extension. Is this the error? If so, how can I solve it? if it's not, would anyone share with me whats causing the error and how to solve it?
Thanks!
You can go check their repo https://sourceforge.net/projects/xampp/files/
you can find .dmg in "XAMPP Mac OS X/" folder
You can change the file extension of the downloaded file manually to dmg and it will work as it should.
I recommend to download the VM version.
if you encounter the following error: "Error starting “XAMPP” stack: Cannot calculate MAC Address" when you trying to start the server, you can solve it by updating the Bitnami HyperKit file.
detailed instructions in the following link:
https://pookidevs.com/solved-error-starting-xampp-stack-cannot-calculate-mac-address/
On macOS, simply change the extension from .bz2 to .dmg so the installer mentioned should be changed to xxxxx.dmg then you can install it right away just double click on it.
credit to : https://stackoverflow.com/a/68201277/7048025
Have been using MAMP Pro for a fair while - version 3 primarily, upgraded to 4 a while ago.
I haven't had any unusual issues at all, but today the Apache service failed to start, telling me to check the error logs. The logs were blank unfortunately... I've made no system configuration changes, no changes to MAMP/MAMP Pro. Shut down my system yesterday, started today, it no longer works...
I've tried numerous suggestions found via Stack Overflow and Google without any success.
Even after completely uninstalling and re-installing MAMP Pro I am unable to get the service to start.
Nothing appears in the logs...
When starting it manually on the command line it comes up with a PHP related error:
$ Applications/MAMP/bin/apache2/bin/apachectl start
httpd: Syntax error on line 135 of /Applications/MAMP/conf/apache/httpd.conf: Cannot load /Applications/MAMP/bin/php/php5.2.17/modules/libphp5.so into server: dlopen(/Applications/MAMP/bin/php/php5.2.17/modules/libphp5.so, 10): image not found
The confusing thing is that I don't have PHP 5.2.17 specified anywhere, at all - according to MAMP Pro it should be using PHP 7.0.12.
If I add PHP 5.2.17 to MAMP using the appropriate MAMP Pro dialogs, Apache still fails to start via the MAMP Pro interface. I can now start it manually from the command line however, but none of my virtual hosts/etc seem to be loaded.
apachectl -V tells me it's using /Applications/MAMP/conf/apache/httpd.conf, but there is nothing in that file that has any reference to any of the configs generated in /Library/Application Support/appsolute/MAMP PRO/conf
It also looks like hosts entries aren't added to /etc/hosts.
Even if I tell /Applications/MAMP/conf/apache/httpd.conf to do nothing but include /Library/Application Support/appsolute/MAMP PRO/conf/httpd.conf (and manually add entries to /etc/hosts) it still doesn't seem to work at all...
I and my colleagues are at a complete loss, especially given it was working yesterday...
Has anyone had any issues like this?
I managed to fix the similar issue you had.
My Apache server was working fine and then following updating to 4.0.6 I experienced similar issues.
There were 2 things I did to fix the issue. I was getting the same error where it couldn't find a php file in 5.2.17. After fixing that by adding 5.2.17 to MAMP I experienced an apache error regarding user permissions.
(22)Invalid argument: getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive
File > Edit Template > Revert ALL Templates to Default Settings.
Save & restarted the servers and all worked finally and all my hosts had retained as well.
I had previously entered a custom line in my httpd.conf file that for countless versions had copied across fine however it looks like the folder structure had changed and so couldn't locate it causing the unusual error about User permissions. I have since re-entered the custom line with the correct structure and all working fine again.
Hope this helps.
For some unknown reason I cannot start WAMP server - The icon stays yellow no matter what:
Checked port 80, and it's not used.
No Skype, no Firewall.
Tried MANY solutions I suggested here in stackoverflow - absolutely nothing.
Tried to uninstall and reinstall - it worked for 10 minutes, then it didn't work again.
The only thing I'm changing is to include Virtual Hosts under httpd.conf. Checked every solution I could find on the net - nothing is working for me.
Maybe, just maybe it's because I previously installed PHP 5.5 apart from WAMP? If I go to PHP > PHP Extensions > then I can see there's a problem in php_opcache and php_enchant. When I click on them I get an error message that says: Could not execute menu item (internal error). [Execption] Could not perform service action: the service has not been started. The PHP Version I installed is 5.5.15. The PHP WAMP is 5.5.12... I don't have a clue how to uninstall PHP, and I couldn't find anything about that on the net.
PHP Error log says: PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - %1 is not a valid Win32 application. in Unknown on line 0
EDIT - It seems like the cause for the problem is me trying to include Virtual Host via httpd.conf file. When I excluded, like in default, WAMP is online again. Any suggestion of how to include virtual host and still get WAMP get online?
It looks like you're running on a corrupt install have you tried reinstalling the software?
Alternatively i would recommend using Xampp which basically offers the same service as Wampp only with a bit more ease of access (also allowing for Mecury mail service and an FTP server for remote access).
The problem with php_intl can be corrected easily, see this answer
In order to find out what Apache is complaining about with the Virtual Hosts definition look at the Windows Event Log or, launch a command window and
cd \wamp\bin\apache\apachex.y.z\bin
httpd -t
This should give you filename and line number where your errors are.
Try changing that port number anyway. Mine stays yellow if the port number is set to 80, even though WAMP says it's not being used by any other program.
I am trying to make PHP5 work over IIS 6.0 on Windows server 2003 and i am following this steps:
http://www.iisadmin.co.uk/?p=4
The thing is, there's no file named "php5isapi.dll" inside the php folder, so I am using php5isapi.dll instead. Is it correct? Or should I try to download the php5isapi.dll from somewhere.
Well, then, I keep following the steps and when I try to execute my php file, I get this message:
The specified procedure could not be found.
What am I doing wrong?
Thanks.
UPDATE
I downloaded php5isapi.dll and tried to make it work with it but i am getting this error:
The specified module could not be found.
Also, after any change, i restart the Default Web Site clicking on stop and play.
UPDATE 2
Now, after rebooting, when trying to access the PHP file, the browser shows a 500 error:
The page cannot be displayed
I noticed that "php5isapi.ll" is no longer available for the last versions of PHP as pointed in here:
Why is php5isapi.dll missing after installing PHP for Windows?
Therefor, what i did was following this tutorial in order to do it with FastCGI
http://www.iis.net/learn/application-frameworks/install-and-configure-php-applications-on-iis/using-fastcgi-to-host-php-applications-on-iis-60
I found it on this comment:
Why is php5isapi.dll missing after installing PHP for Windows?
After restarting the server, it finally worked.
UPDATE (5/21/2010) SUCCESS!
So after MUCH $head->desk()'ing, I've solved it.
Remember kids, be wary of the instant client version you use, dependent on the virtualization settings!
I had been installing the generic Instant Client (not aware our ESX servers sit on AMD processors, not Intel) and that worked fine internally (the CentOS install was 32-bit since our internal ESXi servers aren't 64-bit). Well lo-and-behold, even if you have a 32-bit install running on a virtualized server which is sitting on an AMD64, it still matters what instant client you install.
It was the last thing I thought to check but as it appears, everything is running fine now.
I would like to thank everyone who helped me run through every possible test to figure this out but in the end, it was my fault for not realizing the differences in the virtualizations.
UPDATE (5/21/2010)
I thought this bug had escaped me when I installed it on a new VM internally but I have now found a narrowing link.
I was trying to install this on our production server when I posted this. After a week of no progress and in need to get back to development, I outfitted a VM on our internal server with a brand new install of Crap... CentOS, and fresh installs of instant client and oci8.
Worked perfectly.
However we just uploaded an exact copy of the VM to our production servers and it magically no longer works. Tried reinstalling everything, no avail.
So the only things I could narrow it down to is a firewall issue (although I get the same issue when trying 127.0.0.1) or possibly an ESX (our production servers) server issue, internal servers are running ESXi.
Any thoughts?
UPDATE (3/8/2010) I installed Xdebug and have it tracing my code. This is the output I am getting:
TRACE START [2010-03-08 17:53:05]
0.2090 327864 -> {main}() /data/aims3/http/octest.php:0
0.2091 327988 -> ini_set(string(14), string(1)) /data/aims3/http/octest.php:3
0.2093 327920 -> error_reporting(long) /data/aims3/http/octest.php:4
0.2094 328048 -> oci_connect(string(8), string(8), string(25)) /data/aims3/http/octest.php:6
The trace halts at that point.
I have installed everything the same way on a local server and it works fine. To say I am at a complete loss would be putting it lightly.
*NOTE: I ran make test and it returned FAIL on every test. I never ran this on my working machine to see if it reports the same errors. Any idea why make test would report FAIL but make doesn't report any error?
I've installed the Oracle Instantclient with no reported errors along with the OCI8 PECL package and at a loss. Whenever I try to open a connection with oci_connect, it halts my entire PHP script.
EXAMPLE:
<?php
ini_set ("display_errors", "1");
error_reporting(E_ALL);
echo "before";
$conn = oci_connect("username", "password", "host");
echo "after";
?>
Returns a complete blank page. The module is loaded (seen in phpinfo) and everything installed with no errors.
I am at a complete loss.
CentOS: 5.4
Apache: 2.2.3
PHP: 5.3.1
InstantClient: 11.2
oci8: 1.4.1
Any thoughts?
NOTES
Apache Error Log reports nothing
Attempted Debugging:
1:
<?php
ini_set ("display_errors", "1");
error_reporting(E_ALL);
echo "before";
if(!function_exists('oci_connect')) die('Oracle Not Installed');
echo "after";
?>
Returns:
beforeafter
2:
Changing host to //host
Returns:
Same error
Is there anything in Apache's error_log? Is this mod_php or FastCGI or normal CGI PHP? What happens if you run the script via the command line?
You could also try setting PHP's error log and looking in there.
EDIT1: Try:
echo "before";
if(!function_exists('oci_connect')) die('Oracle Not Installed');
And post the results...
EDIT2: I'm really not sure. My best bet is this info from the PHP manual:
The most common problem with
installing OCI8 is not having the
Oracle environment correctly set. This
typically appears as a problem using
oci_connect() or oci_pconnect(). The
error may be a PHP error such as Call
to undefined function oci_connect(),
an Oracle error such as ORA-12705, or
even an Apache crash. Check the Apache
log files for startup errors and see
the sections above to resolve this
problem.
Anyone else have any ideas to help out Bryan?
Bryan,
I am going to be honest: I tried this two years ago and failed miserably. :) I could not get the OCI functions to work for anything by compiling myself.
But in the interest of getting it done I looked for an alternate solution and found it in Zend Core for Oracle. All I did was download, run the installer, and it was done. It installs Apache/PHP, MySQL (optional), and the InstantClient for you.
Now as Zend Server, it is basically the same product. I realize that this may not be the solution you hoped for, but if it works...
Zend Server
are you connecting to remote or to local db? i think, for localhost you must replace "host" with "false". I hope, this will help you...
edit: i think, you are missing a parameter...my last suggestions are: 1. you must set the port (default 1521) AND/OR 2. You must enter db name AND/OR you must set the instance name (the ORACLE_SID parameter)
You never check the return value of oci_connect() or call oci_error() but it doesn't look relevant to your problem since you seem to be suffering from a PHP crash. There's an open bug for RHEL that may affect you too:
http://pecl.php.net/bugs/bug.php?id=16626
Did you build the oci8 package yourself? Are you using a third-party binary?
It has been fixed. See the top for details but here is the cliff notes: virtualiztion environments matter.