I want to use ImageMagick in one of my project. Currently i am using
PHP version: 5.5.9
Windows Version: Windows 8 Pro 64-bit
XAMPP Version: 1.8.3
Control Panel Version: 3.2.1 [ Compiled: May 7th 2013 ]
i want to install ImageMagick 6.7.6 because it is already installed on my server where i want to deploy my project but this is not important i just want to install imageMagick on Xampp
this is what i tried
1 Add php_imagick.dll in C:\xampp\php\ext
extension=php_imagick.dll in php.ini C:\xampp\php\php.ini
Now i restart windows and when i lunch xampp it says
PHP Startup: Unable to load dynamic library 'C:\xampp\php\ext\php_imagick.dll'
- %1 is not a valid Win32 application
Please point me in right direction and tell me how can i install ImageMagick in xampp
The error is happening, because you probably have downloaded the x64 version of ImageMagick, but the architecture of your operating system does not mean that your php version is also x64 - you can check it by running phpinfo() and look at the Architecture part.
What you have to do is really simple. Download the x86 dll file and replace the old one in C:\xampp\php\ext
Also, there is no need to restart windows. An Apache restart from the xampp control panel will do the job.
Related
I've been trying to install php_imagick on wamp64 without any luck.
The desired goal is for WordPress to stop showing the error message:
The optional module, Imagick, is not installed or has been disabled.
You can also skip reading and view the images attached below.
My setup:
Wamp64 Windows 10 Release Version 3.2.3.3 64 Bits [Windows Build: 19041]
PHP Version: 7.4.9
Build Date: Aug 4 2020 11:45:36
Windows: NT *username* 10.0 build 19041 (Windows 10) AMD64
Compiler Visual: C++ 2017
Architecture: x64
Loaded Configuration File: C:\wamp64\bin\apache\apache2.4.46\bin\php.ini
Thread Safety: enabled
I tried installing the following ImageMagick files:
1) ImageMagick-7.0.10-30-Q16-HDRI-x64-dll.exe
----A) php_imagick-3.4.3rc1-5.6-ts-vc11-x64.zip
----B) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
2) ImageMagick-7.0.10-30-Q16-x64-dll.exe
----A) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
----B) php_imagick-3.4.4rc2-7.3-ts-vc15-x64.zip
3) ImageMagick-6.9.3-7-Q16-x64-dll.exe (Current)
----A) php_imagick-3.4.4rc2-7.3-ts-vc15-x64.zip (Current)
----B) php_imagick-3.4.3rc1-7.1-ts-vc14-x64.zip
----C) php_imagick-3.4.3rc1-5.6-ts-vc11-x64.zip
What I did:
I first installed the EXE file and then extracted from the zip file just the php_imagick.dll file into this folder:
C:\wamp64\bin\php\php7.4.9\ext
Which matches my currently used PHP version (see images later for more information[php.ini]).
I tried restarting Wamp, rebuilding symlinks by switching PHP/Apache versions.
Will also be worth mentioning that I at one point tried extracting the full zip into the 'ext' folder under a folder named 'php_imagick' as shown below and did manage to get this error:
C:\wamp64\bin\php\php7.4.9\ext\php_imagick\php_imagick.dll (The specified procedure could not be found.)
but mostly I receive these errors:
[25-Sep-2020 08:58:50 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'php_imagick.dll' (tried: c:/wamp64/bin/php/php7.4.9/ext/php_imagick.dll (The specified module could not be found.), c:/wamp64/bin/php/php7.4.9/ext/php_php_imagick.dll.dll (The specified module could not be found.)) in Unknown on line 0
When I install Magick using the EXE, I make sure to check the install to the path, Change the folder to C:\ImageMagick, and install the legacy drivers if possible, as suggested on Stack OverFlow.
(I also make sure to uninstall the last version I tried each time)
I have Visual Studio installed and a bunch of redistributables and also both x86 and x64 versions of these:
https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
http://www.microsoft.com/en-us/download/details.aspx?id=30679
Without any luck, I went ahead and read several Stack OverFlow posts and could not find a solution.
How to install ImageMagick with Wampserver 3.0.0 64?
step-by-step instructions for installing IMAGEMAGICK on WAMP?
Installing php_imagick.dll PHP extension on wampserver 2.2
Unable to install php_imagick.dll on wamp
Imagick delegates installation on WAMP
How to install ImageMagick with Wampserver 3.0.0 64?
step-by-step instructions for installing IMAGEMAGICK on WAMP?
Installing php_imagick.dll PHP extension on wampserver 2.2
Unable to install php_imagick.dll on wamp
Imagick delegates installation on WAMP
WAMP PHP Startup Error: Unable to load dynamic library
Installing ImageMagick extension with php/windows
Linker error when trying to use ImageMagick as static libraries with Visual Studio compiler
Installing Magick++ in Visual C++ 2010
Installing Magick++ in visual studio 2019
ImageMagick with Visual Studio
WampServer and Imagemagick, imagick php module not recogized
Cannot load imagick library
ImageMagick not working
What can I try next?
typo in line 955: .php=.dll
I hired a freelancer to fix this for us.
Uninstall any versions of WampServer and ImageMagick you have installed
Don't forget to backup your database and www folder before you uninstall
We are going to install a trustable software called Chocolatey that will help us fix a bunch of errors with Wamp64 and it's extensions as well as help us update those applications with one command.
For those of you who already fixed this before using Chocolatey and
now seeing this error message again simply update Wamp and ImageMagick
using the choco commands provided on their website and then read my
note under 4) for more information
Run PowerShell as Admin
Follow this guide to Download chocolatey https://chocolatey.org/install
Use the same methods to Download Wamp64 https://chocolatey.org/packages/wamp-server
Run Wamp from the newly created shortcut on your desktop
Change the PHP version to 7.4.9 or the latest and only then move
to the other steps
Don't worry about the fact the folder is named Wamp and not Wamp64. It's still the 64bit version. You can check this in the about section of Wamp
Download https://chocolatey.org/packages/imagemagick
Download https://windows.php.net/downloads/pecl/deps/ImageMagick-7.0.7-11-vc15-x64.zip
Note: If that doesn't work, they probably updated again. Just try the same methods using newer versions then these. I will first try more recent versions of php_imagick instead of replacing the ImageMagick core DLL files. One thing I will not do is give up.
Extract And Copy all CORE_RL and IM_MOD_RL DLL files into C:\wamp\bin\php\php7.4.9 where php.exe is located
(Do not run any EXE file from here as we already installed ImageMagick)
Download https://windows.php.net/downloads/pecl/releases/imagick/3.4.4/php_imagick-3.4.4-7.4-ts-vc15-x64.zip
Extract and Copy just the php_imagick.dll file to C:\wamp\bin\php\php7.4.9\ext
Open your php.ini file by left-clicking Wamp->PHP->php.ini and then make sure you delete all leftovers and add below any extention= line the code below:
extention=imagick
(Apparently, New PHP versions require writing it without the "php_"...".dll" parts)
Restart Wamp by closing it and reopening it from its shortcut
This is by far the only solution I could get running.
choco:
Google = https://www.google.com/search?q=chocolatey
2019 = http://web.archive.org/web/20190101113929/https://chocolatey.org/
2018 = http://web.archive.org/web/20180414000310/https://chocolatey.org/
Enjoy
I use wampserver 3.2.3 64bit together with PHP 7.3.
Copying the CORE_RL and IM_MOD_RL DLLs into the PHP root direcory as orr burgel recommended in item #5 did not work for me.
I had to copy these DLLs into c:\wamp64\bin\apache\apache2.4.41\bin.
I am using magic library to change the resolution of the images. But I am getting following error when I am running the Wamp.
I am also sharing links of the website I have followed.
Link
http://www.zoharbabin.com/5-steps-to-get-imagemagick-on-xampp-1-7-3/
These are step by step instructions on how to get ImageMagick running under PHP in a Windows environment. Apache does not provide binaries for Windows and relies upon several sources to do so:
XAMPP
WampServer
Apache Lounge
Bitnami
Apache Haus
It is recommended to download either the XAMPP or WampServer distributions as they are complete packages that contain Apache HTTP server, PHP and MySql known and tested to work together.
Making ImageMagick work was not easy for me. It took two days of trial and error to get this to work. Hopefully this will help you get up and running faster. I have this running on the following:
Windows 7 Home Edition 64-bit
XAMPP 5.6.3
Apache HTTP 2.4.10 (Win32), VC 11
PHP 5.6.3 x86 VC 11, Thread safe
Thus, a 32-bit web framework compiled with VC 11 and thread safety enabled all running on 64-bit Windows 7. You must choose a 32-bit ImageMagick DLL distribution along with a 32-bit VC11 thread safe DLL wrapper to match.
The instructions below should work equally well with WampServer as there is no dependency on the Windows web framework.
The important thing to understand here is that you must know your web server environment and what components are installed and built with. you must match bitness, Visual C runtime, and thread safety configurations together.
Step #1: Install imageMagick to C:\ImageMagick
Go to Link and download the latest release. Use the 32 bit DLL version (ImageMagick-6.9.0.0-Q16-x86-dll.exe)
Install it into C:\ImageMagick directory
Step #2: Get the PHP wrapper from the Windows PECL repository
Go to http://pecl.php.net/package/imagick
Get the latest stable version, 3.1.2. You want the 32-bit, VC 11, thread safe version
php_imagick-3.1.2-5.6-ts-vc11-x86.zip
Step #3: Create distribution directory
Create a /php/ext/imagemagick directory
Copy the ZIP into it and unzip it
Step #4: Make backup copy of DLLs
Make a C:\ImageMagick\Backup directory
Copy DLLs in the C:\ImageMagick directory to the C:\ImageMagick\Backup directory
Step #5: Overwrite DLLs
This is the most important step that if you don't do, will result in the PHP wrapper not loading correctly:
Take all the DLL files in \php\ext\ImageMagick and overwrite those in C:\ImageMagick
If you do a SET on the DOS command line you will see that the ImageMagick installer had created a entry into the system variable environment path (i.e. to C:\ImageMagick). Supporting DLLs will be picked up from there and they will be the Pecl Windows repository DLLs, not the distribution.
Step #6: Set module extension in PHP.INI
First, copy the php extension wrapper php_imagick.dll into the /php/ext directory. Then modify the PHP.INI to do this:
extension=php_imagick.dll
Step #7: Reboot Apache
Reboot Apache
Go to phpinfo and see that imagick is installed as a module.
Here's where you can learn more about your environment.
Pay attention to stuff in phpinfo like:
Compiler: MSVC11 (Visual C++ 2012)
Architecture: x86 (32 bit; as opposed to x64 which is 64 bit)
Thread safety: enabled (TS)
Apache Environment Configuration (PATH should have C:\ImageMagick included)
More gory details: Installing ImageMagick with PHP and Windows
I tried every article on installing imagick in xampp but non of them is worked. it is surprise to see that installing dll is not as simple as it normally suggest
i am trying imagick on xampp 1.8.3 but if any one have any idea to install imagick in xampp then please guide me
I am trying on
Windows 8 Pro 64-bit
XAMPP Version: 1.8.3
Control Panel Version: 3.2.1 [ Compiled: May 7th 2013 ]
firstly i installed Binary Release Win32 dynamic at 16 bits-per-pixel in C:\ImageMagick-6.8.9-Q16
then load this dll in php\ext
and lastly edit extension=php_imagick.dll in php.ini
now after restart windows i got this error
PHP Startup: Unable to load dynamic library 'C:\xampp\php\ext\php_imagick.dll'
- The specified procedure could not be found.
lastly all other dll files have PHP 5.5.9 version but i have not found any php_imagick.dll that have PHP version 5.5 .Even this dll is also 5.3 PHP version. is this work also
Please tell me why i am getting this error
I believe that imagemagick also needs access to the CORE_RL_*.dll set which are located in the C:\ImageMagick-6.8.9-Q16 directory that you installed into.
You have to add this folder into to your PATH for these to be found at runtime.
Its a bit messy and if anyone knows a better solution than adding this to the PATH I would love to know about it.
Try downloading your php_imagick.dll from here http://windows.php.net/downloads/pecl/releases/imagick/
I'm getting "PHP Startup: Unable to load dynamic library: c:/wamp/.../php5.3.10/php_ffmped.dll - %1 is not Win32 application" error when run php from cli, and same error in apache error log when running as apache2 module.
I tried andswers for xampp installation
(Install FFMPEG on XAMPP)
But they didn't work for me.
It seems that difference in xampp php module is a php compiler - MSVC6 since for wamp it is MSVC9.
I killed half a day investigation this issue. Please help me out where can I get proper libs to fix this problem.
The only possible thing I can think is that maybe you don't have the correct visual c++ runtimes for your support DLLs. If the php_ffmpeg.dll is 32 bit, then it's failing to load because it can't load its msvc* dlls or one of the other DLLs (avcodec*.dll, etc) may need appropriate runtimes installed also. Download the latest Visual C++ 9.0 runtimes.
ImageMagick is working when I test it from cmd but when using it for Xampp and restarting it then the error message I receive is:httpd.exe-Entry Point Not Found. The procedure entry point MagickGetImageGravity could not be located in the dynamic link library CORE_RL_wand_.dll.
The second message is PHP StartUp: Unable to load dynamic library C:\xampp\php\ext\php_imagick.dll- The specified procedure could not be Found.
I'm pretty sure second error message is caused by first error up top. Probably wrong dll. I'm on Windows 7 64 BIT running PHP 5.3.5 and Apache 2.2.17. Thanks
My refrence is this page
ImageMagick 6.8.0 binaries compiled with VC9 (Visual Studio 2008). I noticed that the official ImageMagick builds are now Visual Studio 2010 and that wouldn’t work well with PHP compiled with 2008. see phpInfo() and search for compiler and php version.
The download link for the binaries is here: imagick-php54-php53.tgz
I download this folder and copy php54 -> php_imagick_ts.dll to xampp\php\ext
My PhP Version is : PHP Version 5.4.4
then rename it to php_imagick.dll.
At the end restart your appache server.
I had this same problem and banged my head against all kinds of possible solutions before finally finding a combination of Imagick builds and dll's that would play nicely with my setup. Here's what finally worked for me:
OS: Windows 7 64 Bit
PHP: 5.5.6
XAMPP: 1.8.3
Compiler: MSVC11
Architecture: x86
ImageMagick: ImageMagick-6.7.7-5-Q16-windows-dll (available here)
Imagick DLL: PHP5.5.x version from http://www.peewit.fr/imagick/
Once I finally had this set up, Apache finally started without any errors. Hopefully it works for you, too!
I think there some problem loading imagemagick php module while you install latest version of windows binary ,i rectify the problem by download 6.7.7-5-Q16 32bit version and its worked on that version.once install this version download imagemagick PHP module and restart apache.