I want to import a database which size is 11 MB. I installed xampp local server. it was set in php.ini to 2M.
I set it to upload_max_filesize=128M and also max_file_uploads=128. After that i used the phpinfo() function, which show me that is set to 128 MB, BUT in phpmyadmin it shows me 8MB and i got this message after import: You probably tried to upload a file that is too large. Please refer to documentation for a workaround for this limit.
YES, I restarted the server many times!
I tried to find and answer from another posts but with no results. Can anyone help me with this ? thx
Also set post max size to desired value.
post_max_size=128M
Click on the MySQL config button (see image below) then click my.ini and change: myisam_sort_buffer_size = 8M to myisam_sort_buffer_size = 1888M.
Increase your M size according to your own then click apply.
Related
I am trying to upload a file using uppy. On my server I am using php 8.0 and Apache 2.
I am uploading a file which is about 156Mb in size but server returns response with 413 status code and no message.
As per instruction given on all over internet I tried to configure my php.ini file and here are the updated configurations
post_max_size = 20480M
upload_max_filesize = 20480M
max_execution_time = 24000
max_input_time = 24000
memory_limit = 800M
Unfortunately above settings didn't help me. I have confirmed the php.ini file location with following command
php -i | grep Conf
Apart from this, I came across an answer that asked to set SecRequestBodyLimit value in modsecurity.conf. modsecurity was not even installed in my system but still I installed it and set the SecRequestBodyNoFilesLimit value as SecRequestBodyLimit 1000000000 but no luck.
I highly doubt that this is from server and Uppy has no role in this issue but I cannot predict the exact problem.
Response 413 is a typical error when you use ModSecurity, and the limit was set incorrectly. You should review the relevant documentation. If the size of your file is 156MB, you should calculate the base64 encoded size: multiply it with 4 and divide it by 3, so the approximate value is 208MB. I should set up 250MB for SecRequestBodyLimit, but not for SecRequestBodyNoFilesLimit - please keep it as low. 250MB is 262144000 byte, so try to set up this:
SecRequestBodyLimit 262144000
Also please check your Apache's error.log, you have to see every relevant information there.
I want to import a file(85 MB) at my local server.
I changed in the php.ini the following values of the three variables (upload_max_filesize, memory_limit and post_max_size) exactly as I saw at same problems, with the right order, I restarted my MAMP server and my laptop but it didn't change anything and I can't import files more than 2 MB.
Can you give any advise to fix it ?
You need to edit the php.ini file for the php version you are using. i.e. v7.2.1.
First check which version you're using by going to
MAMP-> Preferences -> PHP -> Select/Specify PHP Version
Then go to /Applications/MAMP/bin/php/php7.2.10/conf/php.ini and input the new settings there.
Stop your server and restart MAMP. Import should now run as expected.
Cheers.
Once you find out which version of PHP your MAMP is running, find the php.ini file at C:\MAMP\conf\php7.2.10\php.ini.
You'll need to change BOTH upload_max_filesize and post_max_size. If you only update the first, it'll default to the post_max_size.
Restart the MAMP and you should be good to go.
First check your PHP version
then according to your php version you have to go this php version file (php.ini)
and the change like below... :)
post_max_size = 256M
; Maximum allowed size for uploaded files.
upload_max_filesize = 256M
; Maximum execution time of each script, in seconds
max_execution_time = 600
; Maximum amount of time each script may spend parsing request data
max_input_time = 600
; Maximum amount of memory a script may consume (8MB)
memory_limit = 512M
I did all these things but nothing happened.I have two files with the name "php.ini",the first is "php.ini-development" and the second is "php.ini-production".Because i don't know which is the correct file to change the values,i changed the values and at the two because my phpinfo have like a Loaded Configuration File this:"C:\MAMP\conf\php7.0.13\php.ini" and not one of the two.
If you are seeing timeouts, you can increase max_execution_time and max_input_time.
I know this question has been asked before, but I've gone through all previously described options and I'm wondering if I'm missing an option. I'm trying upload a file through Apache/PHP that is greater than 2.000GB in size. Files smaller than that work fine.
The following php.ini variables are set, and I have restarted Apache to make sure they are in effect:
max_input_vars = 10000
post_max_size = 5000M
upload_max_filesize = 5000M
max_file_uploads = 1000
max_execution_time = 600
max_input_time = 600
memory_limit = 10000M
I am using a javascript uploader, with no filesize limits in the script, and a PHP page to receive the uploaded files, also with no limits in the script. When it fails, it only gives this error message in the javascript console in Chrome and IE: Failed to load resource: net::ERR_CONNECTION_RESET. There are file size limit checks in the javascript and PHP pages, but those errors are never displayed... so I'm thinking it is not even getting the chance to check the file size in either place.
In case anyone hits this 2.0GB limit, the fix for me was that PHP 5.4 did not support uploads greater than 2.0GB. This limit was changed in PHP 5.6: http://php.net/ChangeLog-5.php#5.6.0
Upgrading to PHP 7.0 worked for me!
I am trying to import a database that is 9,451 KB and 1,933 KB zipped up. When I try to import this database I get this error: You probably tried to upload too large file. Please refer to documentation for ways to workaround this limit.
I have tried setting the following settings and restarted my local machine and I still get the same error:
upload_max_filesize = 100000000000000000000000000000M
memory_limit = 10000000000000000000000000000000000000M
post_max_size = 1000000000000000000000000000000000000M
max_execution_time = 5000000000000
max_input_time = 500000000000
What Am I doing wrong :(
First thing, there are lot of 0s in your settings!!
You don't require such high allocations. Keep the default settings.
Just change upload_max_filesize = 64M and post_max_size = 64M
Now, getting to the point. Why you problem still persists.
You modified the wrong php.ini file. Check if there's another php.ini file in the system.
You don't require to restart your whole machine. Simply restarting the server would be enough.
Try these and see if it works out!
The phpMyAdmin documentation also has some additional hints, solutions, and workarounds.
I'm still trying to import a large text file into phpPgAdmin and not succeeding. I have changed the following fields in the php.ini file, but it didn't help.
I changed the following fields to:
upload_max_filesize = 3G
post_max_size = 4G
memory_limit = 5G
I believe the timeout default is 30 seconds (which I haven't changed), but I get error messages right away saying "No server supplied!" or "Import error: File could not be uploaded to the server".
And these are very small files compared to the 2GB text file I am trying to import. The largest file I have been able to import is 1.6 MB.
Any ideas?
This error was happening to me, and the solution is pretty simple (something that could easily be overlooked). This is an older post, but since it came up first on a google search I hope I can save someone some time. Restart apache and the changes should take effect. Cheers!