I want to make use of auth system which comes with the laravel package but the problem is when I make new laravel package using composer i.e composer create-project laravel/laravel project name --prefer-dist
it do not install those auth resources which includes (i.e. auth folder inside resources > views) and also I can't find the Services Folder inside app directory.
All other things are working fine except this authentication system.
What can be the possible problems? Please give me solution
I am working with MAMP.
Taylor Otwell has made it opt-in for Laravel 5.1
You need to run following command after installation
php artisan scaffold:auth
UPDATE
I think this has been answered here
You could also run the command php artisan make:auth in the root directory of you laravel project. I had the same problem and it worked for me.
The command php artisan scaffold:auth didn't work for me i don't know why.
it issued the error:
[Symfony\Component\Console\Exception\CommandNotFoundException]
Command "auth" is not defined.
Did you mean this?
make:auth
in Laravel 5.2 you just have to run this command "php artisan make:auth" and the auth folder will be created
Since laravel 6.* version make:auth is no longer supported, use ui:auth instead.
For deploying ui pack run
composer require laravel/ui --dev
then update composer.json :
composer update -W
and do the:
php artisan ui:auth
You need execute
php artisan make:auth
now if your style css and js are missing
You need load file .css and .js
1) execute in your project
npm install
2) then execute
npm run dev => now in folder /public now exist folder js and css
3) reload page
Related
In my Laravel 8 application, after installing laravel ui, when I try to run 'php artisan ui bootstrap' I get the following error:
In Bootstrap.php line 70:
copy(C:\xampp\htdocs\netlytics\resources\js/bootstrap.js): Failed to open stream: No such file or directory
I have run composer update successfully.
I have laravel/ui version 3.2.0. I am running Laravel 8.40.0 with PHP 8.0.3.
The site is an old site that I upgraded from Laravel 5.3 and PHP 5.6.
The pre-processing was being done using gulp with a gulpfile.js to configure the mix conversions.
With Laravel 8 I know I need to update my pre-processing to use webpack.mix.js, but so far can't get there.
There is supposed to be a resources/app/bootstrap.js file but it is not showing up and I do not know what it should look like if I wanted to put it there.
Any ideas how to get this installed correctly?
I poked around and finally discovered that I needed to install jQuery and jQuery-ui as well as popper.js. I installed those and again got the same error, but this time I just created a resources/app/bootstrap.js file and when I ran 'php artisan ui bootstrap' it ran and populated the bootstrap.js file.
Here solution:
https://stackoverflow.com/a/68393896/15391779
composer create-project laravel/laravel --prefer-dist laravel-bootstrap
composer require laravel/ui
php artisan ui bootstrap --auth
npm install
npm run dev
I have installed Laravel 8 as a new project. When I run the project I get the "In order to use the Auth::routes() method, please install the laravel/ui package." But Laravel installation doc says that laravel ui is depreciated and that we should use Jetstream. So I installed Jetstream with the Livewire stack. Back to test the project and I get the same error msg.
I have run a composer dump-autoload.
What do I have to do to get a Laravel 8 project to run?
You will need to clear and recreate cache. Run the following php artisan commands:
php artisan cache:clear
php artisan config:cache
php artisan route:cache
I had this problem as well on many 'upgrades' from earlier versions of Laravel. I don't want to change the entire auth mechanism, as it works, so I will keep the code I have.
#Elisha Senoo's answer is correct, and solved it most of the time. However, if you find yourself unable to clear the cache (because it has the same error message on the artisan command), the solution is to manually clear the .php files within the bootstrap/cache folder and then php artisan config:cache.
Does someone know why this command gets aborted when I enter it?
D:\sites_laravel\vinyl_shop>php artisan make:auth
The [auth/login.blade.php] view already exists. Do you want to replace it? (yes/no) [no]:
Aborted.
error message
Delete everything inside resources/views/auth folder.
Delete app.blade.php from layouts folder.
Then Try it again.
100% working.
In laravel 6 the auth command updated, it good for you to update your laravel.
and for authentication you need first do this:
composer require laravel/ui --dev
and then run this:
php artisan ui vue --auth
If your laravel version is less than 6, just delete the files related to authentication from resources/views/auth, then it should work for you.
i think there is a probleme with login file in views folder ,if you can remove it, remove it and also
verify if your composer is installed you can install it by
composer install
and also your System auth by
composer require laravel/ui "^2.0" --dev
this commande it works for laravel 7
but look for the new version in [new version][1]
and if you in a new version of laravel 7+ just use :
php artisan ui vue --auth
I've been trying to work on a laravel app but I can't even make it start.
I've run composer install, composer global update, composer udpate, composer self-update and several other commands,
I've deleted the vendor folder, the composer.lock file, re-ran composer install and things I've found online to no avail. This is the error I keep getting:
#php artisan package:discover
In Container.php line 779:
Class request does not exist
Script #php artisan package:discover handling the post-autoload-dump event returned with error code 1
Not sure where to go next. Any ideas?
I would suggest you remove your composer itself and re-install the composer. the try install you laravel packages with it.
Try clearing application cache using this command: php artisan cache:clear
The cache:clear command can be used to clear the applications cache files.
Don't worry about your laravel
check composer correctly installed on your system
check composer have access for READ and WRITE in your system
after your sure about things
check your laravel install in your system for PHP you have and find specific you php version composer connected to it (Those who have multi PHP)
then have two option:
composer global require laravel/installer
then laravel new blog or
composer create-project --prefer-dist laravel/laravel blog
then go to folder cd /projectName
Use PHP's built-in development server: php artisan serve
I'm trying to use Laravel 5.5. I updated my php 7.0 to php 7.1. Even, I update my laravel installer package. But, when I try to do:
laravel new myProject
I get this error:
You made a reference to a non-existent script #php -r
"file_exists('.env') || copy('.env.example', '.env');" You made a
reference to a non-existent script #php artisan key:generate
Illuminate\Foundation\ComposerScripts::postAutoloadDump You made a
reference to a non-existent script #php artisan package:discover
I am using laravel valet and if I go to the browser, when I try myProject.dev is not working. I see this error:
Whoops, looks like something went wrong.
I tried using:
php artisan key:generate
inside my project, but I got that:
[ErrorException]
file_get_contents(/Users/jorgeJimenez/Sites/laravel5-5/.env): failed
to ope n stream
: No such file or directory
I noticed, my laravel 5.4 projects are working. I copied a .env file and I put on my laravel 5.5 projects. After that, I run
php artisan key:generate
and the key was generated and my project in the browser works.
It's supposed, all that process is automatic, but I am not quite sure what is happening.
You can try update your composer:
composer self-update
I had the same problem. Then I found that there was no problem when i created the first project use laravel 5.5. so I clear composer's cache dir. It works well now.
This is because of your Laravel Installer or Composer version. I have faced the same problem and found following 2 different solutions:
Generally you can solve with by running composer global update command and then run composer update command from your project directory. This solution basically updates your installer and then your project.
If still, you have this issue, you need to run composer self-update command first and then run composer update command from your project directory. Here your composer will update and then your project.
Hope this answer will help you.