I'm trying to use Laravel 5.5. I updated my php 7.0 to php 7.1. Even, I update my laravel installer package. But, when I try to do:
laravel new myProject
I get this error:
You made a reference to a non-existent script #php -r
"file_exists('.env') || copy('.env.example', '.env');" You made a
reference to a non-existent script #php artisan key:generate
Illuminate\Foundation\ComposerScripts::postAutoloadDump You made a
reference to a non-existent script #php artisan package:discover
I am using laravel valet and if I go to the browser, when I try myProject.dev is not working. I see this error:
Whoops, looks like something went wrong.
I tried using:
php artisan key:generate
inside my project, but I got that:
[ErrorException]
file_get_contents(/Users/jorgeJimenez/Sites/laravel5-5/.env): failed
to ope n stream
: No such file or directory
I noticed, my laravel 5.4 projects are working. I copied a .env file and I put on my laravel 5.5 projects. After that, I run
php artisan key:generate
and the key was generated and my project in the browser works.
It's supposed, all that process is automatic, but I am not quite sure what is happening.
You can try update your composer:
composer self-update
I had the same problem. Then I found that there was no problem when i created the first project use laravel 5.5. so I clear composer's cache dir. It works well now.
This is because of your Laravel Installer or Composer version. I have faced the same problem and found following 2 different solutions:
Generally you can solve with by running composer global update command and then run composer update command from your project directory. This solution basically updates your installer and then your project.
If still, you have this issue, you need to run composer self-update command first and then run composer update command from your project directory. Here your composer will update and then your project.
Hope this answer will help you.
Related
I have installed Laravel 8 as a new project. When I run the project I get the "In order to use the Auth::routes() method, please install the laravel/ui package." But Laravel installation doc says that laravel ui is depreciated and that we should use Jetstream. So I installed Jetstream with the Livewire stack. Back to test the project and I get the same error msg.
I have run a composer dump-autoload.
What do I have to do to get a Laravel 8 project to run?
You will need to clear and recreate cache. Run the following php artisan commands:
php artisan cache:clear
php artisan config:cache
php artisan route:cache
I had this problem as well on many 'upgrades' from earlier versions of Laravel. I don't want to change the entire auth mechanism, as it works, so I will keep the code I have.
#Elisha Senoo's answer is correct, and solved it most of the time. However, if you find yourself unable to clear the cache (because it has the same error message on the artisan command), the solution is to manually clear the .php files within the bootstrap/cache folder and then php artisan config:cache.
I've been trying to work on a laravel app but I can't even make it start.
I've run composer install, composer global update, composer udpate, composer self-update and several other commands,
I've deleted the vendor folder, the composer.lock file, re-ran composer install and things I've found online to no avail. This is the error I keep getting:
#php artisan package:discover
In Container.php line 779:
Class request does not exist
Script #php artisan package:discover handling the post-autoload-dump event returned with error code 1
Not sure where to go next. Any ideas?
I would suggest you remove your composer itself and re-install the composer. the try install you laravel packages with it.
Try clearing application cache using this command: php artisan cache:clear
The cache:clear command can be used to clear the applications cache files.
Don't worry about your laravel
check composer correctly installed on your system
check composer have access for READ and WRITE in your system
after your sure about things
check your laravel install in your system for PHP you have and find specific you php version composer connected to it (Those who have multi PHP)
then have two option:
composer global require laravel/installer
then laravel new blog or
composer create-project --prefer-dist laravel/laravel blog
then go to folder cd /projectName
Use PHP's built-in development server: php artisan serve
I wanted to remove a package from laravel. I did composer remove vendor/package
It was all good on my dev, but when I deploy on production something went wrong and I cannot do anything now.
when I run
php artisan package:discover
I'm geting
In ProviderRepository.php line 208:
Class 'Laracasts\Flash\FlashServiceProvider' not found
I'm guessing I it is something to do with some kind of cache or maby config
but I cannot run this command,
php artisan config:clear
because I'm getting the same error message as above.
PS. I'm using Laravel 5.6
You may need clear the autoloader files if they get jammed up as it is looking at those cached files when php artisan config:clear runs, thus creating the jam.
Remove the following files and they will rebuild:
/bootstrap/cache/packages.php
/bootstrap/cache/services.php
I fixed my problem deleting a config file like so:
$rm bootstrap/cache/config.php
This file is basically a cache for config, if you want to have this file built for you just run a following artisan command:
$php artisan config:cache
I want to make use of auth system which comes with the laravel package but the problem is when I make new laravel package using composer i.e composer create-project laravel/laravel project name --prefer-dist
it do not install those auth resources which includes (i.e. auth folder inside resources > views) and also I can't find the Services Folder inside app directory.
All other things are working fine except this authentication system.
What can be the possible problems? Please give me solution
I am working with MAMP.
Taylor Otwell has made it opt-in for Laravel 5.1
You need to run following command after installation
php artisan scaffold:auth
UPDATE
I think this has been answered here
You could also run the command php artisan make:auth in the root directory of you laravel project. I had the same problem and it worked for me.
The command php artisan scaffold:auth didn't work for me i don't know why.
it issued the error:
[Symfony\Component\Console\Exception\CommandNotFoundException]
Command "auth" is not defined.
Did you mean this?
make:auth
in Laravel 5.2 you just have to run this command "php artisan make:auth" and the auth folder will be created
Since laravel 6.* version make:auth is no longer supported, use ui:auth instead.
For deploying ui pack run
composer require laravel/ui --dev
then update composer.json :
composer update -W
and do the:
php artisan ui:auth
You need execute
php artisan make:auth
now if your style css and js are missing
You need load file .css and .js
1) execute in your project
npm install
2) then execute
npm run dev => now in folder /public now exist folder js and css
3) reload page
Today, I pulled down the laravel/laravel repository from Github. I then ran php composer.phar install (as I normally would on my system, with a command window in the project directory). However, when I ran php composer.phar update, I received this error:
Everything installed just fine, and Laravel works as it should.
Any ideas what could be causing this issue?
Edit 1
artisan exists in the root of the project, but it throws an exception when I attempt to run php artisan optimize:
Side Note 1
If I try the alternative method (quicker) of installing Laravel (php composer.phar create-project laravel/laravel), I get the following:
Edit 2
Upon installation, I also get the same error, where it claims it cannot find artisan. Therefore, the installation does not fully complete. I believe that it is stopping when it wants to compile classes (or something to that effect), and then write bootstrap/compiled.php. That file doesn't exist.
Here's the snap from the install:
Edit 3
It seems that Composer is looking for artisan in the drive root (C:\). Why is it doing this? Even if I specify -d on the update, it throws the error. (I picked this up from a hunch - simply copied artisan to the root of the drive and it found it - albeit, it obviously did not run...)
Solution Found:
Composer makes calls to php artisan <command> (as per the instruction in composer.json > scripts), but it does not see what directory it is running from (perhaps because it is an external command?).
So, I solved my initial problem by using an absolute path to artisan in composer.json.
Everything is working now. I just wish I knew how to get Composer to know that it is running from C:\LocalServer\lab\laravel, and not just C:\.
As i can see, your artisan file is missing. Can you post the exact steps on how you install it ?
Also, please follow http://laravel.com/docs/installation and http://niallobrien.me/2013/03/installing-and-updating-laravel-4/
I had this problem today too. My laravel folder inside the vendor was deleted after composer update. I ran composer install again and problem resolved.