I'm currently setting up a Windows 10 Pro x64 machine to work with Apache, PHP and its oci8 extension.
I successfully managed to get oci8 working on OSX 10.11 and Windows 2012 Server before, so I thought I knew what to do. But this was 32bit – now it's 64.
The software now installed is:
Apache 2.4.18 x64
PHP 7.0.3 TS x64
Oracle Instant Client x64 (instantclient-basic-windows.x64-12.1.0.2.0)
oci8 2.1.0 TS x64
I don't get it to work. The error message is:
Warning: PHP Startup: Unable to load dynamic library
'ext\php_oci8_12c.dll' - Das angegebene Modul wurde nicht gefunden. (Module not found.)
in Unknown on line 0
Extension 'oci8' not present.
I installed the Oracle Instant Client by writing its directory into the PATH variable and copied the php_oci8_12c.dll file to the PHP ext dir and uncommented the corresponding line in the php.ini. Shouldn't that be enough?
I've read many postings here on Stackoverflow and other websites about similar problems, things I've tried:
Moving all DLLs to C:\Windows\system32
Include the PHP extension dir in the PATH variable
Re-checked that every component is 64bit
Created ORACLE_HOME and ORACLE_BASE variables (which shouldn't be necessary)
If I change the php_oci8_12c.dll x64 to the 32bit one, I get a different error message:
Warning: PHP Startup: Unable to load dynamic library 'ext\php_oci8_12c.dll' - %1 ist keine zulässige Win32-Anwendung. (%1 is not a valid Win32 program.)
in Unknown on line 0
Extension 'oci8' not present.
Any ideas what's wrong with all that?
Thank You!
To sum it all up,
One more thing... NTS assumes that PHP does not run as Apache module,
is that correct? Are you using FastCGI? – Álvaro González
was the way to go. If anyone's having troubles with the same, here are the exact steps I took:
PHP 7.0.3 VC14 x64 Thread Safe from windows.php.net/download/
Apache 2.4.18 x64 from apachehaus.com/cgi-bin/download.plx
Oracle Instant Client 12.1.0.2.0 x64 from oracle.com/technetwork/topics/winx64soft-089540.html
(Get the current Thread Safe oci8 DLL from pecl.php.net/package/oci8, but PHP comes with a version of it - worked with either for me)
Install PHP as an Apache module. Unzip the Instant Client and move it to your desired location. Add this location to your PATH system variable. Restart your machine and it should show up under 'PATH' in your phpinfo().
Then I had to make the PHP extension_dir an absolute path. So no 'ext', but 'C:/Program Files/php-7.0.3/ext'. With only 'ext' set to the extension_dir I could connect to a remote Oracle DB via 'php.exe filename.php'. But Apache would throw me an error in error.log that it cannot find the DLL.
No DLL copying is needed if you choose to keep the oci DLL that comes with PHP. No more environment variables than PATH have to be changed/created.
At least in my case :-)
Related
Ok, so i have the same problem.
To fix it i had to install oracle instant client and an NTS dll of oci8_12c
when i start my WAMP i get this error:
[20-Feb-2018 13:40:38 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'd:/wamp64/bin/php/php5.6.31/ext/php_oci8_12c.dll'
in Unknown on line 0
I also added the ext folder and oracle instant client to PATH
PHP version: 5.6.31
Oracle instant client 11.2.0.4.0 x64
NTS x64 php_oci8_12c.dll
I downloaded Visual Studio 2005 (required for the oracle instant client)
I have a 64 bit windows 10 system
What do I do?
EDIT
php.ini
extension=php_oci8_12c.dll without ";"
Thead-safe dll gives the same issue
I enabled oci8 in wamp64 after to do this:
copy oci.dll, oraociei12.dll, and oraons.dll to apache/bin folder.
Reference: https://community.oracle.com/thread/4178182
I hope you solved your problem, I'm posting for the next ones to face this problem.
I finally found, after 4 days, the solution to my problem.
If, after adding to your PATH environment variables the complete path to instant client, e.g: C:\instantclient_{version}
and after restarting your web server (IIS, WAMP, XAMP, etc.) you still get one of those error messages:
There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries
or
PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp64/bin/php/php5.6.38/ext/php_oci8_12c.dll' - The specified procedure cannot be found.
It is because PHP still can't access the files from Instant Client.
To solve that problem, you have to add the complete path to your instant client, but on the System variables, not in the User variables.
That being done, simply restart your web server, and you're done :)
I have updated four files names given below in php/ext folder of xampp
I also updated these updated lines in php.ini
extension=php_pdo_sqlsrv_7_nts_x64.dll
extension=php_pdo_sqlsrv_7_ts_x64.dll
extension=php_sqlsrv_7_nts_x64.dll
extension=php_sqlsrv_7_ts_x64.dll
but when I try to run php artisan migrate it gives me this error
PHP Warning: PHP Startup: Unable to load dynamic library 'D:\xampp\php\ext\php_pdo_sqlsrv_7_nts_x64.dll' - %1 is not a valid Win32 application.
in Unknown on line 0
what could be the possible problem?
Am I doing something wrong
I downloaded files from https://www.microsoft.com/en-us/download/details.aspx?id=20098
Actually I came to knew that x64 or x86 is version of php which can be obtained from phpinfo(). so my php was x86 and I was using x64 files and also my php was thread enables so I did not need nts files
Is there a driver for MSSQL Server for PHP (64-bit)?
I have Apache 2.4 (64-bit) environment installed. Also PHP 5.5.12 (64-bit)
I have search for MSSQL Server driver "on the net" for php 64-bit but I found nothing. All I can find is a 32-bit. Also, all the articles that I found were old and nothing recent.
I tried to install the 32-bit driver but I get a warning when executing C:\php>php -m
This is the warning
PHP Warning: PHP Startup: Unable to load dynamic library 'ext\php_sqlsrv_54_ts.dll' - %1 is not a valid Win32 application. in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library 'ext\php_pdo_sqlsrv_54_ts.dll' - %1 is not a valid Win32 application. in Unknown on line 0
I downloaded the MSSQL Server Driver from Microsoft Drivers 3.0 for PHP for SQL Server
If there a MSSQL Server driver available for PHP 64-bit environment?
If not is there a workaround beside having to go back to 32-bit PHP environment?
I have run into this issue as well. What I have found is that you need to make sure that the extension=php_sqlsrv_54_ts.dll area of your php.ini file is only uncommented on the Apache location of php.ini.
For example:
if you have C:\Webserver\bin\apache\bin\php.ini, you probably have a C:\Webserver\bin\php\php.ini as well. Make sure your extension referrences are ONLY in the ...\apache\bin\php.ini.
It took me 3 hours to realize there were 2 different php.ini files and that the error was throwing because I had the extension initialized in the wrong php.ini file yet it was still looking there for some reason. I hope this helped.
Have you tried updating to php 7 ?
The x64 builds of PHP 5 for Windows are experimental, and do not provide 64-bit integer or large file support. Therefore I doubt MS will release a php5 version of the driver especially since the one for php 7 has been out for a few months now.
This MSSQL driver was release in July of 2016
Download the "SQLSRV40.EXE" from https://www.microsoft.com/en-us/download/details.aspx?id=20098
The executable is a self-extractor, unpack where you want.
You even get the PDO for the same price.
Here are the files in the package
PHP Drivers License Terms.rtf
php_pdo_sqlsrv_7_nts_x64.dll
php_pdo_sqlsrv_7_nts_x86.dll
php_pdo_sqlsrv_7_ts_x64.dll
php_pdo_sqlsrv_7_ts_x86.dll
php_sqlsrv_7_nts_x64.dll
php_sqlsrv_7_nts_x86.dll
php_sqlsrv_7_ts_x64.dll
php_sqlsrv_7_ts_x86.dll
release.txt
SQLSRV_Readme.htm
SQLSRV_ThirdPartyNotices.rtf
Tested with php 7.0, 7.1, 7.2
I am trying to get php_ssh2.dll working on my IIS 7.5 server.
I have PHP 5.5.4 installed and running (NTS VC11 x64).
I downloaded php_ssh2.dll from here: http://windows.php.net/downloads/pecl/releases/ssh2/0.12/php_ssh2-0.12-5.5-nts-vc11-x64.zip
I placed the extension and the pdb file in the ext folder of my PHP install and enabled it in IIS.
The problem is when I restart IIS, I get the following in my error log:
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\PHP\5.5.4\ext\php_ssh2.dll' - %1 is not a valid Win32 application. in Unknown on line 0
I also have PHP 5.3 installed with php_ssh2.dll (not the same as linked above) and it works fine.
I do have libssh and openssl installed, as well as Visual C++ 2012 x64.
Is there some other step I'm missing?
Minor update, I tried doing everything above with the x86 builds instead and had the same results. PHP itself runs fine, but I cannot utilize the php_ssh2.dll
It appears the issue is that the 5.5x builds of the php_ssh2.dll lack the libssh2.dll, per this bug report: http://www.phplt.com/2013/09/17/17/php_ssh2-0-12-5-5-nts-vc11-x86-zip-missing-file/
Is this something I can build or acquire elsewhere?
What are you trying to do with php_ssh2.dll? Maybe phpseclib, a pure PHP SSH2 implementation, would work better for you?
I found lots of articles about this problem, however none of them helped me.
Here is a I list of what I 've already tried:
uncomment the semicolon on php.ini
add the dependence file (libmcrypt.dll) on php folder, windows and
windows/system32
I 've restarted the IIS Server after each attempt
I cannot use this method, it was installed with a zip file.
On IIS Manager the extension is shown as enabled but checking the php error log I found this message multiple times:
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\PHP\v5.3\ext\php_mcrypt.dll' - %1 is not a valid Win32 application. in Unknown on line 0
Here is a the screenshot of phpinfo()
I have Windows Server 2008 R2 64bit with IIS 7.5 and PHP 5.3.10. Maybe the file (php_mcrytp.dll) is not the good one, where can I download it? On php site I cannot find the php_mcrytp.dll file under ext folder.
Thank you
If you downloaded PHP for Windows from php.net and are running the FastCGI version of PHP (as you should with PHP 5.3.x and IIS), mcrypt library is already compiled statically in the PHP engine. You don't need to install any extra DLL.
If you see the mcrypt section in phpinfo's output then it means mcrypt is already enabled (otherwise the mcrypt section would be missing).
And that's also the reason there is no mcrypt DLL.