I have a form that allows upload three files at the same time but just one is required. That works fine, my only problem is the following: if I upload three files I haven't any problem but if I upload one or two files (leaving two or one files empties) I obtain the following notice:
Notice: No file uploaded in Unknown on line 0
As much as empty files. The files are uploaded properly without any other problem, but I want remove that notice... or unless hide it, although I prefer remove it. I tried to hide it using
error_reporting(0);
and
ini_set('display_errors',0);
but neither of two worked...
It is the first time that I have problem, if someone could lead me I'd be very grateful due to that I am stuck with it.
If you are having the same problem as me, check with phpinfo() if you are using a debug version of PHP. If you see that Debug Build has a value of yes, your problem will be fixed if you install a live version of PHP instead of a debug version
The Error itself is caused by running a Debug version of PHP 7, see the bug report. As noted by HPierce because it was a Debug build it overrides the usual PHP settings for error_reporting. However as the Original question is actually about how to hide certain [expected] error messages (Notices), my answer is to this detail specifically.
Kevin, the attempted ways to hide errors you've listed in your question would normally work on non-debug PHP builds. However, it is unwise to ignore the errors, rather than solving them at source. It's also (more) unwise to hide all errors simply due to having expected errors appearing.
As it's only a Notice, you can work around it by setting your error_reporting() value as below:
//report all errors except notices.
error_reporting(E_ALL & ~E_NOTICE);
I would suggest this is far wiser than turning off error reporting entirely which is not recommended. If you want to stop errors being output to browser (as referenced by Tina) you can use display_errors.
Perhaps you may also need to set
ini_set('error_reporting', 0);
depending on your php ini configuration?
Also make sure you set it before carrying out any of the code.
Related
In localhost, we can easily find the errors like missing semicolon in line number xxx, undefined variable in line number xxx,class already declared etc. But, when I upload all my files in shared hosting and try to see results in the web browser, I get to see same error page everytime and it's really really hard to detect what exactly caused the error. The project which i uploaded to the live server was written in laravel. I have tried 'Display errors On' in php.ini, error_reporting(E_ALL). I have even checked the error_log in the root directory but, those logs are usually from few days ago. error image description here
Any possible solutions ? Or should I switch to server where proc_open is enabled?
Check this:
https://laravel.com/docs/7.x/errors
Laravel handles errors and can write them in a log file.
You can customize it if you want, but I don't think it's necessary to do so.
If you dont use any frameworks or ones that don't support such a feature for that matter you could always use the native PHP function set_error_handler and catch errors and write them in a log file.
Note: BEWARE of the excessive log file size. If your project has a lot of visitors or has lots of notices and warnings, this log files can get excessively massive, unreadable, and consuming your space. Don't turn it off, it's always good to know where are the errors, but check and debug them often and delete them when not needed.
I have a staging server running a Yii application that now gives a 'white screen of death'. I cannot see anything being ouputted to the screen (or even the source code when 'view source'), locally the same code runs without any issues.
Can anyone suggest a good routine to debug 'white screen of death' within a Yii application?
Getting a blank screen in yii is mostly because error_reporting is off.
Put
error_reporting(-1);
ini_set('display_errors', true);
in index.php should get your output back.
Note that you can always look in application.log and apaches error.log for informations when you don't have some output.
This is for Yii2
I found the code was failing in vendor/yiisoft/yii2/BaseYii.php at method autoload($className). It was failing at execution:
include $classFile; (line 293)
The cause in my case was a function method name declared twice.
You might be interested to know that you can discover the cause (which Yii2 suppresses through its own error-handling) by preceding the command with Chris's recommended code above https://stackoverflow.com/a/25139283/3125602. If you introduce them too early in the code, they get overwritten by Yii2's error-handling settings.
It is quite a simple issue and happens either when a script reaches the PHP memory limit or during a plugin or theme conflict.
Solutions :
Increase the Memory Limit :
Since this is regarded as one of the cause, it is recommended that the PHP memory limit be increased. Edit your wp-config.php file via FTP adding the following line of code:
define( ‘WP_MEMORY_LIMIT’, ‘64’);
This increases your memory limit to 64M. You might need to contact your host before you do it as some host don’t allow it from your end.
Deactivate all your Plugins :
Connect to your site via FTP and rename the wp-content/plugins folder to plugins_old to deactivate all your plugins.
Here is a detailed answer to the infamous "White Screen of Death" problem. Thank me later :)
https://www.perceptionsystem.com/blog/wordpress-errors-solution/
CodeIgniter 2.x still uses the classic mysql. We all know it's bad practice to still use it, but my job still requires me to use CodeIgniter.
I always have my Console.app (OSX) open watching my Apache/MySQL/PHP/CodeIgniter-native error logs.
Now I mostly have all notices/errors/etc. fixed always instantly when I see them and constantly monitor my development with Webgrind on my MAMP.
Back to the start; I constantly have one big annoying thing each page-load PHP always gives the error about mysql_pconnect is going to get deprecated in the future.
In the CodeIgniter driver the command is suppressed by # to not print the warnings to the screen, but it still ends up in my logs.
Is there any viable way to except one such error specifically in either PHP code or the PHP settings?
Locally I could recompile the whole PHP core and just remove the warning, but I would like to have the logs on our production installations rid of those warnings too :P.
Thanks in advance!
Traditionally, you can use set error verbosity using error_reporting(E_ALL ^ E_NOTICE ^ E_DEPRECATED) (i.e., report everything—except notices and deprecation warnings) as mentioned in "disabling deprecated errors".
Your issue may be related to CodeIgniter taking ownership of all errors.
system/core/CodeIgniter.php calls the function set_error_handler. You can find and modify the function _exception_handler it invokes on error in system/core/Common.php. It doesn't appear to be a configurable, so you may simply want to edit the line that begins with $is_error.
I'd like to see any PHP errors that are occuring, ie the "Expected ; on line 5 of myfile.php" sort of thing. Unfortunately, I cannot seem to figure out how to see this information.
I've set E_ALL, display_errors ON, friendly error messages are turned off, IIS is set to pass-through on errors, what am I missing?
Syntax errors used to show up as stated above on any page; they no longer do. We moved the server to a localhost for development, and I guess didn't mimic exactly the server config. Now I'm stumped.
Tried on IE and Chrome, neither of which show the errors.
Errors are logged in PHP's log file, but I'd still like them to be displayed on the page; at least for now.
UPDATE:
Just tried adding ini_set('display_errors', 'on'); directly into the requested page, and it now works.. but why? Why does it need to be set locally? My PHP.ini file has this declared already.
To answer the first part of the question; to see the errors when using ajax: You can use the developer tools of your browser to see the exact response from the server.
In FireBug for Firefox for example, you go to the Net tab and there you see all ajax request popping up as they happen. Opening one of these requests will give you an overview with more tabs like Response and HTML.
Try using:
error_reporting (-1);
E_ALL isn't really "all" for php < 5.4.
Also, make sure 'display_errors' is set.
ini_set( 'display_errors', 1 );
Well, looks like this is half my own stupidity, half the cloudiness of automatic installations.
Turns out there were TWO php.ini files, and that IIS used the one located within the iis express directory on the main drive, instead of the regular PHP directory.
So to anybody else having this problem, I'm providing the full list of crap you have to wade through to get the errors as you would like:
1) Turn off the IIS default error pages
2) Disable 'friendly error messages'
3) Ensure you are using the CORRECT php.ini file, and change the parameters as needed. Specifically error_reporting and display_errors.
All of this is necessary before seeing all of the error messages you need right in the browser.
When I developed a website on my localserver it was working fine.
Now that I've uploaded it live I'm getting several notices.
Notice: Undefined index: ... on line 14
I've figured out that it happens because I'm using variables which arn't defined, and would like to go through and fix it. But I need a live version working tonight.
Is it possible to suppress the Notices and have the website act as it does on my localhost while its on my live server?
You've got it twice wrong. On your localhost and on your live server!
Localhost
Always show everything on screen, you want to know about notices too before you go live, as you can see now!
Live server
Never show anything on screen, it makes you vulnerable (it's deadly)
Log everything, also notices! So don't do what the other answers tell you!
You can choose which kind of errors will show up on your site on a global scale through php.ini or through .htaccess for specific folders, or per script by using error_reporting().
Read more on that and which options to set for your specific needs at www.php.net/manual/en/function.error-reporting.php
Also read: http://www.php.net/error-reporting
Look in the file php.ini for a line similar to error_reporting = E_STRICT - Edit it to remove the STRICT bit and put in error_reporting = E_ERROR.
I would recommend that in the near future that you fix those errors anyway.