I've download and install mongo and it's woring just fine, but when i tried to use it with Laravel I get some problems.
I downloaded mongodb PHP (TS) extension from pecl https://pecl.php.net/package/mongodb/1.4.0/windows and add it to my php extension
I've read other solutions but it just don't work;
The Class 'MongoDB\Driver\Manager' not found and even when i add phpinfo() in a page It doesn't display any mongodb extension
I'm using php 7.0 and wamp64 btw.
You need to download exact dll file which is match with your PHP version. phpinfo() will not show Mongodb if version doesn't match.
Ensure the following things and download the correct dll file.
1) Your php version
2) Your system architecture (64 or 86)
3) Whether Thread safety enabled or not (You can check this in phpinfo())
Download DLL here
Related
I have the following error. My php version is 5.6, a x64 bit system and wamp. I downloaded the pecl driver "5.6 Thread Safe (TS) x64" and pasted inside ext folder in php and also edited the php.ini file.Restarted the local server. but still the error is coming.Anyone have any solution
the error is "The MongoDB PECL extension has not been installed or enabled."
The same issue happened to me because of wrong dll file.
Ensure the following things and download the correct dll file.
1) Your php version
2) Your system architecture (64 or 86)
3) Whether Thread safety enabled or not (You can check this in phpinfo())
Find DLL here
I am trying to use iMagick in Symfony2.
I am using PHP 5.4.16 and all i have done :
1-Copy php_imagick_nts.dll from php5-4 directory from the extracted http://valokuva.org/~mikko/imagick-php54-php53.tgz to php/ext .
2-Rename it to php_imagick.dll and add the “extension=php_imagick.dll” to php.ini
3-Create a page like this :
<?php
$a = new Imagick();
?>
but i receive this :
Fatal error: Class ‘Imagick’ not found in C:\xampp\htdocs\info.php
When I tried to use this in a symfony controller, the error occur again:
FatalErrorException: Error: Class 'Imagick' not found
Unfortunately the details about imagick extension not appear in output of "phpinfo()"
Is this version is incompatible with PHP 5.4.16 ?! If yes,what version i must use? Where? Thank for any help...
After trying many solutions, none seemed to work.
I managed to install it on Windows 10 64-bit, Apache 2.4 and PHP 5.6, but I think it should work for all versions.
Hopefully you will have no problem installing Imagick for PHP.
Step 1) Gather information
First of all you should gather some information of your PHP environment.
You can easily see your PHP information with the function phpinfo()
The information you need:
Architecture: x86(32-bit) or x64(64-bit)
PHP-version: you can find this in the header of the phpinfo() output.
PHP Extension Build: This string contains 2 important parts:
NTS or TS
VCx (like VC11)
Loaded Configuration File: the path to your used php.ini file.
Step 2) Download Binary
You can download the binary from the official site of ImageMagick. I recommend you to read the small introduction under the "Windows Binary Release" to be certain which "bits-per-pixel" to choose from(8 or 16).
Downloading the latest version should be just fine.
Make sure this binary is the same architecture as your PHP architecture that you have gathered in step 1.
Step 3) Install Binary
Install the binary to your phpx.x.xx\bin file. For example: C:\wamp64\bin\php\php5.6.16\bin. (This can be any folder, but for the convenience I put in here)
Make sure "Add application directory to your system path" is checked. Should be checked by default though.
Step 4) Download PHP extension
The DLL PHP extension is available through the windows pecl php site
Again, you can just click the latest version.
Next of, choose the right version based on the gathered information.
For example: php_imagick-3.4.1-5.6-nts-vc11-x64.zip
This can be stripped into components:
php_imagick-3.4.1 - This is the php imagick extension with the version. This is not important.
5.6 - This is your PHP version and should be equal to the PHP-version you are using, which you have determed in step 1.
NTS - This should be equal to the information of your PHP Extension Build that you have gathered in step 1.
VC11 - This should also be equal to the information of your PHP Extension Build that you have gathered in step 1.
x64 - This the architecture of the extension and should be equal to your PHP architecture that you have gathered in step 1.
Step 5) Extract PHP Extension
After you have downloaded the file, you should open the .zip file and look for a file named: php_imagick.dll.
Extract this file to phpx.x.xx\ext.
Make sure the .dll file is fully accessable by you. Sometimes you need to explicity unblock the file.
Step 6) Activate PHP extension
To activate the extension in PHP, you should state in your php.ini file that you want to use this extension.
You have gathered the path to your used php.ini file in step 1.
Add the line extension=php_imagick.dll to your php.ini
Step 7) Restart your PC
Just to make sure, restart your PC so all Environment Paths will be correctly loaded.
This should install Imagick correctly with the latest versions and the right architecture.
Imagick should also be listed in phpinfo() with the appropriate "ImageMagick supported formats" (Just make sure it is not empty).
I spent many hours trying to make Imagick work, finally I got it.
My installation instructions
Install WAMP 32bit (even if you running 64bit system you must use 32bit version of WAMP)
Install ImageMagick to C:/imagemagick, use this file: https://www.dropbox.com/s/i2mhrhd7sp0ilzk/ImageMagick-6.8.0-3-Q16-windows-dll.exe
Put DLL with Imagick into extension folder of PHP, e.g. D:\wamp32\bin\php\php5.4.16\ext, I used this file: https://www.dropbox.com/s/ayankf850l08rm2/php_imagick.dll
In php.ini put line "SetEnv MAGICK_HOME C:/imagemagick" without quotes
Better restart PC
I use Wamp 2.4, PHP 5.4.16, Apache 2.4.4, ImageMagick 6.8.0-3 2012-10-24 Q16, Imagick 3.1.0RC2 - all 32bit, OS Win8 64bit
Now it should work and you should see Imagick extension loaded in phpinfo.
I tried a lot of versions of ImageMagick, but newer versions didn't work, 6.8.0-3-Q16-windows-dll works fine.
Symfony2
In Symfony2 use Imagick like this:
$im = new \Imagick('image.jpg');
I'm quite sure this is to do with not having the module loaded correctly or the .dll being placed in a improper location.
You can use PHP's internal function extension_loaded() to check prior to using the class,
<?php
/**
*
**/
if (!extension_loaded('Imagick')) {
//Load some error.
}
?>
That's a method you can check if the module is even being reconsigned by PHP at all.
PHP also provides a function to view your current extensions get_loaded_extensions():
<?php
/**
* Get an Array of current
* PHP extensions for debugging
**/
print_r( get_loaded_extensions() );
?>
Make sure you do:
Check your correct extension library folder location within your phpinfo()
Perform a hard restart of your xmapp/wamp server.
If you're on PHP 5.4 or upwards (Like yourself!), see site below for the updated binaries
After researching too, Imagick does seem to have trouble with PHP 5.3 or upwards; Download new DLL's from this site below (Unofficial):
http://www.peewit.fr/imagick/
Also found other StackOverFlow Articles that have the same problem:
Stackoverflow: Trying to get imagick running on PHP 5.4.3 at Windows x64
Alternatively you're able to use the GD extension to more or less accomplish some of the same functions you require. I do believe GD is a more widely supported module/extension in more recent versions of PHP.
For those using Windows 10 with PHP 7 the following might help:
determine whether your Windows is threadsafe (see the output of phpinfo()) and 32 or 64 bits.
This page contains matching sets for each php version and threadsafe and 32/64 settings. Download both the Imagick and the Imagemagick files.
Follow for Imagick the instructions at the bottom of that page.
For ImageMagick the instructions on that page are not correct. You can put the dll files anywhere but you need to refer to them with the MAGICK_HOME windows environment variable. You may need to reboot for the change of the environment to have effect.
I use :Wamp 2.4, PHP 5.4.16, Apache 2.4.4, ImageMagick 6.8.0-3 2012-10-24 Q16, Imagick 3.1.0RC2 - all 32bit, OS Win7 32bit
Instructions given by fmstoun worked for me perfectly.
Since I spent a lot of hours trying to make the dll work, I wanted to add on to steps given by fmstoun.
Do restart your PC.
Use the full path to the image, for example:
$image = new Imagick($_SERVER['DOCUMENT_ROOT'] . '/images/test.jpg');
Make sure your system environment has 1 single entry for : C:/imagemagick and no more environment variables for imagemagick. If any previous installations have the path, then remove those paths and restart your PC
Make sure http : / / localhost/ of wamp shows 'imagick' as loaded extension
If extension is loaded properly, it has to show up in phpinfo() also as:
imagick module | enabled
ImageMagick version|ImageMagick 6.8.0-3 2012-10-24 Q16 and some more information about imagemagick.
Considering the date of this post, the latest version of imagemagick provided on the official site is: ImageMagick-6.8.8-1-Q16-x86-dll.exe
which fails to load the extension (as seen in apache error logs after a restart).
Hence use the version mentioned by fmstoun.
Hope this answer saves couple of hours of effort and saves time required to go through around 15 SO questions on same topic and also different forums.
UPDATE for those 2019 also using WAMP, a much more simplier method of ImageMagick are as follows:
Go to https://mlocati.github.io/articles/php-windows-imagick.html.
Grab a copy of the .dll extension file of your appropriate setup, choose a "Threads Safe" version.
Grab the corresponding ImageMagick using the link on the same row and install it.
Copy only the .dll file to the extensions folder of your install of WAMP, usually C:\wamp\bin\apache2.4\ext\
Restart apache.
Hope this helps.
Sorry for my bad english:
1º Install Appserv
Filename: "appserv-win32-2.5.10.exe"
URL download: h*ttp://www.appservnetwork.com/ (without *)
Apache port: 8080
2º Download PHP 5.3(Apache 2.2 doesn't support superior)
Filename: "php-5.3.29-Win32-VC9-x86.zip"
How?: Thread Safe
URL Download: h*ttp://windows.php.net/download#php-5.6 (without *)
3º Stop Apache
4º Delete all contents in the folder "..\AppServ\php5"
5º Copy the zip contents to "..\AppServ\php5"
6º Add line
date.timezone = "America/Buenos_Aires" (This is my zone, find yours in php page)
to the "php.ini" in "c:\Windows\php.ini"
to avoid date error in PHP
7º Start Apache
=============================
IMAGIC(Once PHP 5.3 is installed)
1º Instalññ Image magic 6.7(Not superior, PHP 5.3 doesn't support)
Filename: "ImageMagick-6.7.9-9-Q16-windows-dll.exe"
URL download: http://ftp.icm.edu.pl/packages/ImageMagick/binaries/
2º Download Imagic
Filename: "php_imagick-3.1.2-5.3-ts-vc9-x86.zip"
URL download: http://windows.php.net/downloads/pecl/releases/imagick/3.1.2/
3º In the dir "php5/ext" add the file "php_imagick.dll" from the last zip download(other files doesn't care)
4º Add line
extension=php_imagick.dll
to the "php.ini" in "c:\Windows\php.ini"
5º Restart Apache
I have RabbitMQ running on one of our servers and am trying to connect to it via PHP. I am developing on a Windows7 machine and my first line of code reads:
$cnn = new AMQPConnection();
It gives me the error:
Fatal error: Class 'AMQPConnection' not found in
I know that it is something that I need to install but what is it ? I am new to PHP so a little help would be nice.
Ps: I can connect to the RMQ server via the RabbitMQ admin web interface.
Thank you
Jack
Installation guide for php_amqp 1.4.0 (Stable version):
Download proper package for your php version from https://pecl.php.net/package/amqp/1.4.0/windows
Unpack php_amqp.dll to X:/php/ext/ directory
Unpack rabbitmq.1.dll to X:/Windows/system (not system32) directory
Modify php.ini file and add "extension=php_amqp.dll" line at the end of extensions list
Verify module installation by executing command "X:/php/php.exe -m" in command line
Restart webserver
I am developing on a Windows7 machine
You may be out of luck using that specific code. That class is from the PECL aqmp extension. Inside the installation instructions, it states:
Note to Windows users: This extension does not currently support Windows since the librabbitmq library does not yet support Windows.
You will want to use another library to speak to your message queue instead.
The rabbitmq-c library supports windows now, and the php_amqp pecl extension builds on windows as well. The documentation just hasn't been updated, nor are there any official binary builds in the wild. However, I managed to get them to build and have some 32 bit dll's available for download here:
http://www.nathanjohnson.info/?p=77
# AMQP installation php.net:
Note to Windows users: This extension does not currently support Windows since the librabbitmq library does not yet support Windows.
But here at RabbitMQ website is a windows installer...
Apparently this php.net page is outdated
To install do like this:
Download the correct package for your php from this official PECL amqp 1.4.0 page
unzip
add amqp.dll to your php ext folder
add rabbitmq.1.dll to your windows system 32 folder.
This according to the post on the blog I found here i think it is from the same #NathanJohnson who posted also here.
How I got it working:
My System Config: Win 7 Pro, (x64) XAMPP running PHP 5.6(x86)
Follow instruction from here to install RabbitMQ:
https://www.rabbitmq.com/install-windows.html
Now download compatible extension from here
https://pecl.php.net/package/amqp/1.4.0/windows
in my case it is "5.6 Thread Safe (TS) x86"
Now from zip file (php_amqp-1.4.0-5.6-ts-vc11-x86.zip) downloaded copy dll "php_amqp.dll" to your php extension folder in my case it is "xampp/php/ext" and copy dll "rabbitmq.1.dll" to "Windows\system" directory.
now register your php_amqp dll in php.ini file as
"extension=php_amqp.dll"
now restart apache.
Done. Now you should not get AMQPConnection not found exception.
I am trying to connect MSSQL to PHP. i am following this tutorial. Anyway after i added the dll files as described in that tutorial, i get the following warning. How can i solve this ?
php starup sqlsrv unable to initialize module module compiled with module api=20090626 php compiled with module api=20020520 these options need to match
note:i have gone through this post but none helped.
Looks like you've tried to install the sqlsrv extension for php 5.3 on a php 5.2 system.
Either run <?php phpinfo(); ?> and look for the php version and look for the following entries:
PHP Version
Thread Safety
pick the appropriate .dll from the sqlsrv driver: the version number must match and if thread safety is enabled pick the ts version, if not pick the nts version.
For anyone trying to get it to work with PHP 5.5 (PHP compiled with module API=20121212) then you can replace the dlls in the ext folder with new updated binaries >here<
Don't forget to enable the new dlls in the php configuration.
In my case the issue was with multiple php version under an Apache. The php cli loaded another php version's php.ini. The takeaway is: always check the configuration before you dig deeper into the problem.
I wanted to try using SAPRFC dll along with PHP to retrieve data from SAP server at our company, but after downloading the latest version (1.4.1) from http://sourceforge.net/projects/saprfc/files/
Then, I added the dll files (php_saprfc_528.dll and php_saprfc_530.dll) to PHP extensions folder, then I updated php.ini file. When I start Apache server, the following error message shows to me
PHP Startup: saprfc: Unable to initialize module
Module compiled with module API=20060613
PHP compiled with module API=20121212
These options need to match
Googling this issue, I found that that saprfc was compiled with another version of PHP not same as the one I'm using. I'm running PHP 5.5.9, so I started looking with saprfc dll file compatible with PHP 5.5, but I couldn't find.
Can anybody please provide the download for the php_saprfc.dll which will work with PHP 5.5, or what are the steps for compiling php_saprfc.dll that will make it compatible with PHP 5.5
Thanks
Compiled php module you can download here: https://sourceforge.net/projects/saprfcsapnwrfc/files/?source=navbar
Have you installed the RFC DLL on the system in question? At runtime the SAPRFC PHP module needs it - from the installation instructions (As you mentioned DLL I'm assuming you're using Windows):
For installation (from binary package):
PHP binaries (http://www.php.net/downloads.php)
librfc32.dll in Windows System directory (or SAPGUI installed)
You can obtain librfc32.dll from a system that has SAPGUI installed (check the Windows directory) or by installing the classic RFC SDK. For more information on that SDK, see note 27517 (SAP SMP login required).
Once you've done that and if the PHP module still doesn't work, then you can consider recompiling. See the instructions in that same installation guide for instructions. They do mention Visual C 6.0 though, which is rather old...