I used to use forge for deploying my laravel application to production. I recently deregisted forge and I wanted to deploy via ssh to ubuntu server on my own.
I did composer update and I pull changes to my server via ssh; but after these my application started to give error 500. I did every thing I searched may be useful such as commands below but nothing worked.
does any one know why am I facing is this error? in local environment every thing works properly and my laravel project worked properly before ssh and composer update.
these are the steps I have go through but nothing worked:
deleting vendor folder and reinstalling composer
changing permisions for bootstrap and also for the whole project :
sudo chgrp -R www-data storage bootstrap/cache
sudo chmod -R ug+rwx storage bootstrap/cache
run composer dump-autoload
php artisan config:cache
composer update and sudo composer update
I also tried these commands but none of them worked:
php artisan view:clear
php artisan config:cache
php artisan cache:clear
php artisan config:clear
I am using laravel 8
my .env file also exists and every thing are set there
when I turn on debug mode the error of the application page is like this:
Target class [hash] does not exist.
please helpme if any one has any experience on this problem.
From russia /ivorycoat
delete vendor
composer update
.env.example copy and create .env
php artisan cache:clear
php artisan config:clear
php artisan key:generate
php artisan serve
I have a project on Laravel 5 and I work with it at the office and at home too. It works fine, but recently at home it stopped working. Laravel show me two ErrorException
file_put_contents(G:\project\storage\framework\views/751d8a0fd8a7d4138c09ceb6a34bb377aa2d6265.php):
failed to open stream: No such file or directory
and
file_put_contents(G:\project\storage\framework/sessions/aIXycR4LIAUBVIqZu0T590paOMIpV8vfZGIroEp0):
failed to open stream: No such file or directory
I'm searching problem decision with Google and find information about correct rights. All advice is about Linux, but I'am work in Windows at the office and at home too.
When I try to clear application cache and view cache, artisan talk to me - ...cleared. But cache data and views are present in storage.
How can I fix this problem?
The best way to solve this problem is, go to directory laravel/bootstrap/cache and delete config.php file. or you can rename it as well like config.php.old
And your problem will be fixed.
You should typically run the php artisan config:cache command as part of your production deployment routine. As a solution to your problem, I suggest you recreate the cache file, for faster configuration loading.
To do this, run the following Artisan commands on your command line
php artisan cache:clear
php artisan config:cache
You can programmatically execute the command by adding the following to your routes:
Route::get('/clear-cache', function() {
$exitCode = Artisan::call('cache:clear');
$exitCode = Artisan::call('config:cache');
return 'DONE'; //Return anything
});
And then call the clear-cache route from your browser.
After some research I understand - I have very similar, but different root project locations and its cached in /bootstrap/cache. After cache clearing project started.
Actually I faced this issue when I moved my project from server to local.
in
storage/framework
four basic folders are required cache, sessions, testing, views
In My case sessions was missing might be in gitignore.
So I manually created session folder and refreshed browser and it was working.
So any of the missing folder if we delete this problem can be solved.
I solved this problem via creating storage\framework\sessions folder.
Apache + WSL on windows
This is a silly mistake, and a different answer compared to the others, but I'll add it because it happened to me.
If you use WSL (linux bash on windows) to manage your laravel application, while using your windows apache to run your server, then running any caching commands in the wsl will store the linux path rather than the windows path to the sessions and other folders.
Solution
Simply run the cache clearing commands in the powershell, rather than in WSL.
$ php artisan optimize
Was enough for me.
This type of issue generally occurs while migrating one server to another, one folder to another. Laravel keeps the cache and configuration (file name ) when the folder is different then this problem occurs.
Solution Run Following command:
php artisan config:cache
https://laravel.com/docs/5.6/configuration#configuration-caching
Try with these commands that have been useful with those errors
path\project\storage\framework\views...
php artisan view:clear
path\project\storage\framework/sessions...
php artisan config:cache
I deleted the file /public_html/bootstrap/cache/config.php
Then I ran php artisan config:cache
In case of shared hosting when you do not have command line access simply navigate to laravel/bootstrap/cache folder and delete (or rename) config.php.
This happens when you shift your website from local to live server or vice versa.
Simply go to bootstrap/cache and delete config.php.
The reason is related to cache or permission.
Firstly, go to directory laravel/bootstrap/cache and delete all files from cache.
php artisan cache:clear
php artisan config:clear
php artisan config:cache
If the errors still happen. It may relates to permission
Let's try command below (In my case user&group of laravel is nginx)
sudo chgrp -R nginx storage bootstrap/cache
sudo chmod -R ug+rwx storage bootstrap/cache
If you are running laravel inside docker then access its filesystem
$ docker exec -it name-of-laravel-container /bin/bash
Next navigate to your laravel projects root directory. Make sure that you have inside storage/framework folder:
cache
sessions
testing
views
And they should be both readable and writable.
If nothing work try the following in the production environment
1-
composer install --optimize-autoloader --no-dev
2-
php artisan cache:clear
3-
php artisan config:clear
4-
php artisan view:clear
5-
php artisan config:cache
6-
php artisan route:cache
Works for me
Changing name of /bootstrap/cache/config.php to config.php.old doesn't work for me
neither clearing cache with the commands artisan
php artisan config:clear
php artisan cache:clear
php artisan config:cache
And for some weird reason I can't change permission for the owner on the directories, so my solution was running my IDE (Visual Studio Code) as admin, and everything works.
My project is in an F:/ path of another disk.
The reason for this problem is the cache files in localhost. According to that I've tried several things as follows to clear the cache on my project, but every time I've failed.
Tried to clear cahe commands by changing web.php file (with artisan codes)
Tried to clear cache by connecting SSH (via PUTTY)
Tried to host my project in Sub domain within create a new Public directory
So I've found a solution for this problem after each and every above steps failed and it worked for me perfectly. I deleted the cache.php file in host_route/bootstrap/cache directory.
Maybe there is an issue with your composer file. You could try:
composer install installs the vendor packages according to
composer.lock (or creates composer.lock if not present),
composer update always regenerates composer.lock and installs the
lastest versions of available packages based on composer.json
composer dump-autoload won’t download a thing. It just regenerates
the list of all classes that need to be included in the project (autoload_classmap.php). Ideal for when you have a new class inside your project. Ideally, you execute composer dump-autoload -o , for a
faster load of your webpages. The only reason it is not default, is because it takes a bit longer to generate (but is only slightly noticeable)
source
In my case it was not anything that could be fixed with php artisan commands. The issue was folder permissions for the /storage folder. The error did not make that clear.
The solution that worked for me is to just serve the app as admin
if you are
On mac or linux use sudo php artisan serve
On Windows try to open CMD as an adminstrator and then go to project directory and run php artisan serve
Clearing the contents of storage/framework/cache did the trick for me.
I had similar problems because of .gitignore for the /storage folder on first machine, then cloned repository on second machine and laravel was revision to write down sessions cache
So, manually creating folder /storage/sessions might be an solution..
This did the magic for me. chmod -Rf 0777 storage
In my case, I set APP_DEBUG=false since it is a production server, I decided to set it back to true and then it showed Missing BC Math or GMP extension
That is how I solved my own issue, setting APP_DEBUG=true might not work for everybody.
I used Laravel 8, This is my solution:
Goto:
storage/framework/cache/data
set permission directory data is 777
I went all the way, but I did not get the answer.
I just rename cache folder in storage/framework/ to cache1 and solved my problem.
I solved it clearing the content of:
/laravel/storage/framework/views
Then all the views were created again in that folder.
In my case these commands didn't fix it:
php artisan view:cache
php artisan route:cache
php artisan config:cache
I'm using Laravel 8 and in my case it seems that it was an issue with the permissions.
I use laravel on homestead. I tried a lot of different commands in order to clear cache and other stuff and nothing helped.
I keep getting this error:
file_put_contents(/Users/Victor/Sites/pft/pft-back/storage/framework/cache/data/05/9f/059f793d8b638b8c21ead7edbba382b9e9183fac): failed to open stream: No such file or directory
What I've tried is:
Set 777 for storage folder
php artisan cache:clear
php artisan view:clear
php artisan clear-compiled
composer dump-autoload
No idea why it's happening but I'm pretty sure because of homestead since I've just recently started using it.
Also I tried all commands both from homestead user and mac user (I'm running homestead on mac)
The problem is the underlying storage maps, could check if storage/framework, storage/framework/cache and storage/framework/cache/data have r/w permission and otherwise create them?
Currently I'm working on small project that require me to host my laravel app on shared hosting (please ignore the reason why I didn't use VPS to host my laravel project) and this hosting provider disable escapeshellarg() for security reason so I can't use php artisan config:cache to clear config cache.
Is there any workaround for this?
config:clear command just deletes bootstrap/cache/config.php file, so just delete this file manually.
You can call artisan commands programmatically
Artisan::call('config:clear');
This can be helpful in setups where the PHP user has a different set of permissions than the FTP user (so files created by PHP cannot be deleted via FTP)
Try also
for command line
php artisan config:cache
using artisan commands
\Artisan::call('config:clear');
https://www.tutsmake.com/laravel-clear-cache-using-artisan-command-cli/
try this command for clear all cached data at once.
php artisan optimize:clear
Here it is nice tiny library for shared hosting and typing clear bunch of clear commands one by one..
simply just install it once, and clear all caching issues in laravel with just one command.
Laracake
This is very handy
composer require laracake/clearall --dev
After installation
php artisan laracake:clear
This is how I restart queue server on live
## Restart redis and terminate curent jobs
php artisan config:clear ## clear config
sudo -i
cd /var/www/html
php artisan horizon:terminate ## need to be sudo , else throw permission error
php artisan queue:restart
exit
For Laravel > 7 because Laravel 5 is deprecated and the answers are not good enough.
I read all the answers but none of them contain optimize:clear so I want to write my answer for future users.
optimize:clear is the most powerful command to clean all the caches
in Laravel >= 7 you have this command for clearing all the caches
Command:
php artisan optimize:clear
It will clear: Compiled views, Application cache, Route cache, Configuration cache, Compiled services and packages.
It is not harmful at all. and it won't affect any single line of your codes. it just will clear all your cached files.
after running this command you will see:
Compiled views cleared!
Application cache cleared!
Route cache cleared!
Configuration cache cleared!
Compiled services and packages files removed!
Caches cleared successfully!
I am trying to setup a deployment script for my Laravel 5 app to use with CodeShip but I am having issues with clearing the application cache during the deployment.
By running
php artisan cache:clear
it does not give any errors and says the cache has been cleared but it hasnt, then when I ssh into the box and try to delete the cache manually it says permission is denied, so I need to use sudo which is not ideal as Id like to have this all to run without my intervention. I know this is a permissions issue but I cannot work out a way around it.
Is there a way I can do this or maybe a slightly different method?
You shouldn't delete cache manually. Try to run these commands:
php artisan cache:clear
php artisan view:clear
php artisan route:clear
php artisan config:clear
composer dump-autoload
Try php artisan config:cache
This will do it all for you.
Hope this helps!