Install gRPC on centOS / Plesk - php

I'm stuck for a couple of hours now, I want to use Cloud Fire store on domains on my Plesk Server, but I can't get it to work.
I followed the steps from https://cloud.google.com/php/grpc
and a lot of other tutorials, but on all I get errors.
I managed to update the OS PHP version of CentOS, but still no luck.
What I want is that PHP Version 7.2.14 works with gRPC (I already added extension=grpc.so to the php.ini)
But there really isn't a any good documentation on Plesk and gRPC

What errors are you getting? It's during installing grpc.so or it's installed but the script can't load it?
Also, from the link you give, "CentOS/RHEL 6" is not supported.

In my case help this
Install Pecl PHP for CentOS https://stackoverflow.com/a/31558558/1932494
Then run: pecl install grpc

Related

How to download PHP -thread safe now that Homebrew no longer support --with-thread-safety?

I need to use PHP pthreads on Mac OS High Sierra, but Homebrew is no longer supporting downloads of PHP --with-thread-safety.
How do I get and install a thread safe version of PHP for Mac OS, Php v7.1.16 without homebrew?
If it is going to have to be some sort of manual install - does anyone have step by step directions for the mac or know where I can get instructions?
I have been looking on the internet for instructions for 5 hours now. I'm tired and can't believe that no one has any posted info on this.
I was able to get PHP 7.2.5 installed on Mac OS HighSierra with ZTS/Thread safety by using phpbrew.
Install Steps I took:
Downloaded phpbrew from http://phpbrew.github.io/phpbrew/ and installed with their directions. Please note at the end of the installation, they give you further instructions for setting up your ~/.bashrc to load phpbrew, look for them at the terminal.
Once you have phpbrew running you are ready to install php with zts by using the command below (of course you can install all of the extensions that you like by checking the installation for extension instruction)
phpbrew install php-7.2.5 +openssl='/usr/local/opt/openssl/' -- --enable-maintainer-zts --with-curl=/usr/local/
It is important to have openssl and curl already installed before installing php and you must point to their location on your computer at the install line as I have done above. You can add all the extensions you need, but you must have the openssl and curl because I had a ton of problems with installation without them. But you could try omitting.
For those of you who are using PHP ZTS so that you can go on to install pthreads --ONLY PHP 7.2 and above works with Krakjoes pthread-master which you can download and follow the installation at https://github.com/krakjoe/pthreads

How to run PHP with Firebird InterBase in VestaCP (CentOS)

I'm running VPS with VestaCP (CentOS) and I had previously installed InterBase for PHP 7.0.30, but after an yum-update and v-update-sys-vesta-all interbase was no longer running.
Here is what I've got so far:
Okay soo with new update the new PHP 7.1.17 version was installed. Allright, but the interbase module is not running with it.
And first thing I did was yum --enablerepo=remi install php71-php-interbase to install interbase for this new PHP version.
Tried to restart but still getting missing InterBase error if I try to use ibase_connect() function - therefor InterBase is still not properly installed.
I tried to follow PHP InterBase documentation on this, but I realized I have to compile it and add extra parameter on run, but the problem is that VestaCP uses different directories and libraries so I don't want to mess up my VPS.
Has anybody dealt with this? Any "howto's" to follow?
This answer is what #Mark Rotteveel already pointed out in the comments, but only with additional steps.
I had to compile PHP 7.1.17 from source with --with-interbase[=DIR] in configuration and then include it in php.ini
[UPDATE]
I found even faster way to do this automatically (if only I had known this earlier I would have saved few hours of research).
Answer
Just run yum -y install php php-interbase and you will be all set.

How to install a right version phpmyadmin on Centos 6.9 accordingly?

I am moving a Magento 1.8 web to a lower cost hosting and exhausted by phpmyadmin installation.
Magento 1.8 was suggested to run with PHP 5.4 and Mysql 5.5, therefore, I chose a Centos6.9 image and thought could be easier...The LAMP stack installation is smooth, but always got problem with phpmyadmin. I have tried PHP5.4 + Mysql5.5, PHP5.4 + Mysql5.6, PHP5.5 + Mysql5.6 combinations, none of them turn out success...
Most of online blogs suggest same way to install phpmyadmin which I followed as below:
wget http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
rpm -ivh epel-release-6-8.noarch.rpm
or
rpm -iUvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
then
yum install phpmyadmin
I thought the EPEL package will be able to automatically identify php modules already installed and install the right version phpmyadmin accordingly...
instead it seems stick with php 5.3 which is default php version with Centos 6....here is error message:
the list is very long and involved many php modules...
I am kind of newbie with linux server stuff...Can anyone help to address this issue and point a solution out? thank you in advance.
BTW, I am big fan of open source, but from this point, I feel a bit disappointed to open source products...especially when end user need to work with multiple of them together...it can never be said as user-friendly.
If you have the Remi repo installed you should be able to use:
yum install phpmyadmin --enablerepo=remi-php56
You have php 5.4.45 installed from remi-php54, so you need to enabled this repository to install any additional module.
As explained by the Wizard.
Please note than PHP 5.4 and 5.5 are not maintained anymore, so I hearthly recommend to upgrade to a supported release (5.6 or more recent)
P.S. phpMyAdmin in EPEL is quite old (4.0) but suitable for old PHP versions. For more recent version of PHP (5.6, 7 and up), you probably need the latest phpMyAdmin version 4.7 (which is available in "remi" reposotiry)

Update/Upgrade PHP MongoDB driver

Im currently running Php MongoDb version 1.2.10 and I'm wanting to update this version to the most recent/stable.
How would one go about doing this? Im assuming it would be via terminal and using pear or pecl command?
Any Help or advice is greatly appreciated :)
Update :
I did the following within terminal to install the latest version
sudo pecl install mongo
Which has installed version 1.5.6. But after restarting my MAMP server the extension is still stating 1.2.10. Is there something I need to change in my php.ini file? I have already added extension=mongo.so
If you ran sudo pecl install mongo, you likely upgraded the driver for the system install of PHP, which is in a different path than MAMP. There should be a pecl binary within the MAMP path (e.g. /Applications/MAMP/bin/php/php5.x.x/bin), which should be run instead. You may find this blog article as helpful walk-through for the process.
sudo pecl upgrade mongodb worked for me today.

Error installing MongoDb PHP driver with XAMPP on Max OS Lion

I get this error when i try to run following command
sudo pecl install mongo
Error:
...php_mongo.c:22:10: fatal error: 'php.h'
file not found
#include <php.h>
^
1 error generated.
make: *** [php_mongo.lo] Error 1
ERROR: `make' failed
I am new to MAC, please help me to resolve this and get Mongo Working with PHP.
I have installed MacPorts and autoconf
It seems, that you did not install the xampp "Developer Package", required to build additional php extension. You can download the "Developer Package" from:
http://www.apachefriends.org/en/xampp-macosx.html#849
This has already been answered.
Please follow the processes outlined in this answer - Install PECL on Mac OS X 10.6.
I followed the process outlined here http://akrabat.com/php/setting-up-php-mysql-on-os-x-10-7-lion/, referenced by the above Stackoverflow link and the process for install pear, followed by pecl and subsequently -
sudo pecl install mongo
works perfectly on OSX Lion.
You may need to modify the extensions in /etc/php.ini, however, this is explained in the output after you install the php mongo driver.
It took me the whole day to find this answer, I had tried everything, but this worked finally:
sudo C_INCLUDE_PATH=/usr/local/opt/openssl/include /Applications/XAMPP/xamppfiles/bin/pecl install mongodb
I found this article very helpful. Saved a lot of time after I wasted a lot of time to check other links. I did for MAMP and think will work for XAMPP too.
The thing is MAMP does not ship with all PHP sources to compile pecl mongo file and create mongo.so. All what you need is download php for respective version you are using. I was using php version 5.6.10. I checked php.net site that was having 5.6.13 version. I downloaded sources for this version from PhP.net. Executed "sudo pecl install mongo" again and it worked.

Categories