I'm running VPS with VestaCP (CentOS) and I had previously installed InterBase for PHP 7.0.30, but after an yum-update and v-update-sys-vesta-all interbase was no longer running.
Here is what I've got so far:
Okay soo with new update the new PHP 7.1.17 version was installed. Allright, but the interbase module is not running with it.
And first thing I did was yum --enablerepo=remi install php71-php-interbase to install interbase for this new PHP version.
Tried to restart but still getting missing InterBase error if I try to use ibase_connect() function - therefor InterBase is still not properly installed.
I tried to follow PHP InterBase documentation on this, but I realized I have to compile it and add extra parameter on run, but the problem is that VestaCP uses different directories and libraries so I don't want to mess up my VPS.
Has anybody dealt with this? Any "howto's" to follow?
This answer is what #Mark Rotteveel already pointed out in the comments, but only with additional steps.
I had to compile PHP 7.1.17 from source with --with-interbase[=DIR] in configuration and then include it in php.ini
[UPDATE]
I found even faster way to do this automatically (if only I had known this earlier I would have saved few hours of research).
Answer
Just run yum -y install php php-interbase and you will be all set.
Related
I have an Ubuntu 18.04 server with Apache, PHP7.3, and MariaDB.
Now I need to install phpmyadmin and I tried to do that using the code below:
apt install phpmyadmin
But this command will install and replace the PHP7.4 with PHP7.3, whereas I need to keep using PHP7.3.
How can I do this?
How have you installed PHP 7.4, since Ubuntu Bionic (18.04) includes PHP 7.2 (https://packages.ubuntu.com/bionic/php)?
You seem to have gone outside of the standard packages (perhaps you're using the excellent effots provided by Ondřej Surý at https://deb.sury.org/). In this case, it's going to cause you some amount of grief to mix and match the newer PHP with the distribution's phpMyAdmin, because of these dependency problems.
You could force the matter. This is probably going to cause you problems, since Bionic packages phpMyAdmin 4.6.6, which is only supported up to PHP 7.1. https://serverfault.com/questions/250224/how-do-i-get-apt-get-to-ignore-some-dependencies has some instructions on ignoring the dependencies. I recommend avoiding this solution.
You could install your own phpMyAdmin. Download the source from phpmyadmin.net and uncompress it to your web root. You may need to add a short configuration file, config.inc.php, but mostly it just works with the default settings. https://docs.phpmyadmin.net/en/latest/setup.html has a quick start section.
You could downgrade your PHP, but you've already stated this isn't a good option for you, and I'm not sure how the Ubuntu package managers get phpMyAdmin working with this newer PHP version.
Clearly, I think the best solution for you to is to install your own phpMyAdmin.
I have already done much digging on installing/enabling PDO mysql extension on stackoverflow and many other sites, so please do not consider this as a duplicate question
I am on centos 6.5 and has php 5.5.26 which was compiled with make, make install (I know this is an older version so please do not close question or suggest updating to new php version. Also cannot install php using yum as this is what has been installed already me and should not be installed/changed).
So when I did compile php and added it to apache, it does not show mysql PDO driver. I tried putting extension=pdo_mysql.so to ini file with no success (yes I did restart the server as well, after making changes).
It shows pdo enabled, but only for drivers pgsql and sqlite.
Also, tried installing php-mysql package using yum. But the issue with yum installation is it installs 5.3.3 version of driver which complains about compatibility issues as my php version is 5.5.26.
So I am not sure what I need to do install pdo mysql extension
#Peter Darmis was right from his comments.
PHP 5.3.3 was not completely uninstalled, don't know why.
There was already a PHP installed manually be compilation and, as I wasn't aware about this, I was using yum for installation of modules and at that time PHP 5.3.3 got installed which I don't know why it dot un-install properly.
So I ended up with 2 PHP versions, so uninstalled PHP 5.3.3 completely using yum and then resolved this issue compiling PHP with pdo options
Im currently running Php MongoDb version 1.2.10 and I'm wanting to update this version to the most recent/stable.
How would one go about doing this? Im assuming it would be via terminal and using pear or pecl command?
Any Help or advice is greatly appreciated :)
Update :
I did the following within terminal to install the latest version
sudo pecl install mongo
Which has installed version 1.5.6. But after restarting my MAMP server the extension is still stating 1.2.10. Is there something I need to change in my php.ini file? I have already added extension=mongo.so
If you ran sudo pecl install mongo, you likely upgraded the driver for the system install of PHP, which is in a different path than MAMP. There should be a pecl binary within the MAMP path (e.g. /Applications/MAMP/bin/php/php5.x.x/bin), which should be run instead. You may find this blog article as helpful walk-through for the process.
sudo pecl upgrade mongodb worked for me today.
Today some of my packages in Ubuntu was upgraded automatically, and I didn't think of what was actually going on.
Ever since the update, my local dev-environment doesn't work anymore. First of by not working was mod_rewrite which I had to enable again using a2enmod. But now I've run into an issue that I can't seem to resolve. My application can't seem to find the PDO MySQL driver. When running the application, I get the error failed to open the DB connection: could not find driver.
This is strange, since if I check the phpinfo() the PDO drivers do support MySQL, and the socket path is a valid path.
pdo_mysql client API version is 5.5.35 according to php info.
PHP5: 5.5.3
MySQL: 5.5.35
Connectionstring
mysql:host=127.0.0.1;dbname=MyDB;port=3306
What could be causing this?
The PHP MySQL driver (mysql.so/mysqli.so) and the PHP PDO MySQL driver (pdo_mysql.so) are two separate modules. You need both of them for PDO functionality with MySQL.
It is quite possible that one of them is missing or of an incompatible version - I do not have an Ubuntu system at hand, but on my RPM-based Linux distribution there is a separate package for each module (php-mysql/php-mysqli and php-pdo_mysql). I also expect PDO to be using the newer mysqli.so driver, rather than the obsolete mysql.so one, so you should verify that one is installed as well.
Try this:
sudo apt-get install -y php5-mysql php5 mysql-client
This should automatically restart your apache if any of the dependencies aren't installed.
Try using vagrant.
Dependencies can be isolated, upgraded and downgraded when you like.
Vagrant
I'm trying to get the latest Mongo Driver to work with MAMP 1.9.6 on OS X 10.5.8.
I built it successfully from source since it seems that there are no pre-compiled releases, included it into the right directory and restarted the apache.
But PHP doesn't recognize the extension. I used the 1.0.11 driver previously which worked fine, but I need the new version, because Doctrines ODM requires it.
When I replace the 1.2.10 mongo.so with the 1.0.11 and restart apache mongo is available. I don't get what could be wrong.
Anyone had this behaviour or any guesses to get this to work?
Update: The PHP error log shows the following:
[01-Jun-2012 22:02:37] PHP Warning: PHP Startup: mongo: Unable to initialize module
Module compiled with module API=20060613
PHP compiled with module API=20090626
These options need to match
in Unknown on line 0
I'm not quite sure what it means?
2. Update:
I was finally able to sync the API version of phpize.
But now I'm not able to build the driver anymore.
I do the following:
phpize
./configure
make
sudo make install
But at the make command I'm getting tons of syntax errors. Seems that it can't find several header files.
The very first one is the zend_config.h and really I just have those other two files:
zend_config.nw.h
zend_config.w32.h
I downloaded the MAMP components to get this files. Why am I missing this one? And there are a lot of others.
I'm using PHP 5.3.5 Is there a way to get those header files from a different source?
I followed the instructions at Develop MongoDB web apps with MAMP under Mac OS X to successfully build mongo.so for MAMP with php 5.3 on OS X 10.7.3.
I'm adding this for historical purposes -- I guarantee that if you're having the same set of problems, you'll want to do this.
Personally, I had a really difficult time getting MAMP's php version to play nicely with the extension builds that I was trying to make.
I discovered that the problem was that MAMP really hadn't been set up to add extensions in general, and during the compilation of the mongo php drivers, it wasn't installing it in the right place -- so I followed the following tutorial on preparing MAMP for additional pecl and pear extensions.
After following those steps to prepare MAMP for adding extensions, you can easily install any extension.
At the part where it starts talking about adding an extension, use sudo pecl install mongo and restart apache from your MAMP interface.
I ran into the same problem when upgrading from PHP 5.3 to 5.4 and was able to solve it by following these steps:
Make sure to upgrade php5-cli as well as just php5 and php5-common
Uninstall the mongo drive
sudo pecl uninstall mongo
Re-install the mongo driver
sudo pecl install mongo