I am having an issue setting up cURL with IIS 6.0, Windows Server 2003, PHP 5.2.6
I have installed to C:\PHP
set PHPRC = C:\PHP\php.ini
copied ssleay32.dll and libeay32.dll to C:\PHP
in php.ini, uncommented the line
extension=php_curl.dll
extension_dir="C:\PHP\ext"
c:\php\ext has the dll php_curl.dll
C:\PHP is in PATH
still getting
Fatal error: Call to undefined function curl_init()
Make sure php_curl.dll is in the directory listed under "extension_dir" in php.ini. If it is already, try restarting IIS (Apache always needs a restart from me when making php.ini changes).
EDIT 1:
Try opening up a command prompt to c:\php and running:
php -c . -i | find /i "curl"
Does it come back with any output? If so, IIS is using the wrong php.ini file.
EDIT 2:
Is c:\php in your PATH? You can check with "echo %PATH%" from the command prompt.
i ended up doin a reinstall of php, then unistalling php. then i copied and extracted the thread safe php package into c:\php rather than using the non thread safe package
Maybe it's loading c:\windows\php.ini?
I take it you've restarted IIS since you changed the config... :)
Related
I have Apache 2.4.12 and php 5.6.9 on my Windows 8 computer and I'm trying to enable the curl extension for php however, I haven't had much success. After searching the internet for this issue it appears that other's have had the same trouble. Here are the suggestions I've found:
Uncomment ;extension=php_curl.dll in php.ini
Uncomment ;extension_dir = "ext" in php.ini
Download and replace the php_curl.dll file in the ext directory of php with one from this website
Add to the PATH environment variable where php is installed
Copy libeay32.dll and ssleay32.dll from where php is installed to C:\Windows\System32
I've tried every single suggestion with no success except the third item in the list because it doesn't have a .dll file for curl with php 5.6, in fact the highest version avaible is one for php 5.4. There has to be way to enable this extension without having to downgrade my php version to 5.4 and using a .dll file from that website. I've tried searching the internet for a .dll file like the one on the linked website for php 5.6 opposed to a version of php that's outdated but I've had no luck in finding one so I'd like help with this issue.
How can I enable curl for php 5.6 on my Windows 8 machine?
Locate your php folder and follow these instructions:
Move to Windows\system32 folder:
libssh2.dll, php_curl.dll, ssleay32.dll, libeay32.dll
Move to Apache24\bin folder
libssh2.dll
Uncomment extension=php_curl.dll
Note: Don't overwrite when prompted.
Source
I give you an example of a set up that just worked perfectly for me :
downloaded the VC11 x86 Thread Safe version of PHP,
unzipped it within a directory C:\php,
edited the php.ini-development, uncommenting 2 lines :
extension=php_curl.dll
extension_dir = "ext"
saved this file under php.ini.
I just tested it via the CLI (windows CMD here) on a PHP a file (i.e. C:\php\php myFile.php) and cURL worked.
If you have Apache installed and prefer to test it in a browser, you obviously have to adapt this installation with your own files structure and to do not forget to restart Apache.
Running apache service with a specific user other than local system solved the problem for me. You can test this easily by stopping the apache service and running manually <apache dir>\bin\httpd.exe.
I fixed this problem by adding C:\php and C:\php\ext to PATH system variables.
Press window + pause to bring up the System Properties page.
Click Advanced System Settings
Click Environment Variables
You'll see the Path variable in the System Variables box in the bottom.
Append your PHP path to that variable. Now the system will be able to load the extensions.
In addition to uncommenting the line
;extension_dir = "ext"
Try also setting it to the absolute path of the PHP installation's ext folder and then restarting apache.
e.g.:
extension_dir = "C:\PHP 5.6.19\ext"
I am having below error when I try to implement google and facebook authentication in windows 7 using wamp server.
Fatal error: Call to undefined function curl_init() in
E:\wamp\www\mysite\protected\extensions\eauth\EAuthServiceBase.php
on line 273
I am using,
wampserver 2.2
php version 5.3.13
I have enabled php_curl module as well. I checked in php.ini for confirm and it is uncommented as below.
;extension=php_bz2.dll
extension=php_curl.dll
;extension=php_dba.dll
The code has worked in ubuntu with xampp, but not in wamp in windows. I have done everything I can find. I have tried replacing the php_curl.dll also according to the comment on this thread, Call to undefined function curl_init() - with WAMP
My phpinfo() looks like below.
I have installed wamp in the partition E:\, but the "Configuration File (php.ini) Path" seems different, it is C:\Windows.
Please help me to fix the issue.
Visit this and have a file under Fixed curl extensions:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
after download and replace related file then restart server.
In browser navigate to localhost and make sure there is curl extensions showing under Loaded Extensions :
For WAMP running PHP 5.4.3 on Windows 7 64 bit, make sure you use php_curl-5.4.3-VC9-x64.zip NOT php_curl-5.4.3-nts-VC9-x64.zip.
In windows 7 with PHP 5.5.31 after check that php_curl.dll extension is enabled (and still doesnt working), work for me to copy libeay32.dll and libssh2.dll from php directory to Apache bin.
just a guess - this section in php.ini does not reference the correct location
; Directory in which the loadable extensions (modules) reside.
extension_dir = *some value*
http://www.php.net/manual/en/ini.core.php#ini.extension-dir
edit
Also, look for this block in your phpinfo, if it's not there, curl isn't loading (obviously). You're not looking for matching version numbers - just for the block's existence.
edit
look at this question also
PHP and CURL under Windows 7 64 bits and Apache
When using WAMP..
You should have one file php.ini in the main PHP directory
In the php.ini enable the extension extension=php_curl.dll, by removing the ; char
The extension_dir must look like this example: extension_dir = "D:\AMP\PHP\ext\", so not a relative path
You need to restart Apache server only once. No need to restart it many times
Just make sure, you have the php_curl.dll in the ext directory
(windows 10 user)
Since this is the first result in Google and I had exactly the same problem and none of your solutions worked for me and I finally find the correct solution in an other thread of stackoverflow, I'll post link here :
EasyPHP Devserver 16.1 Curl Win 10
The solution is to add the your current PHP directory (depend of which version you use) to your global "path" variable in windows (like explained in the link, but you don't need to add all php directorias of course)
Not sure where to put my experience, hope it will be useful for someone.
In my case (win7 x64 + apache 2.4 + php 7.2), curl extension was enabled in php.ini but did not load. Resolved by replacing libs libssl-1_1-x64.dll and libcrypto-1_1-x64.dll in Apache's bin folder with the latest builds of OpenSSL
For those running PHP 7+ on windows, there is no php.ini file in the php directory by default.
You need to:
create a php.ini file in your PHP directory (it should be under C:\php\, or wherever your php directory is located)
Copy the content of either php.ini-development or php.ini-production into the php.ini file you've created.
Finally remove the semicolon (;) before extension=curl
Change the extention in php.ini file uncomment by removing ; like below
;extension=php_bz2.dll
extension=php_curl.dll
;extension=php_dba.dll
Then restart all services and it will work.
I can't get cURL to work from inside Apache by any means. It's actually fairly strange too provided that:
I can execute my PHP pages from the CLI and it POSTs my requests perfectly fine
When I look at my error logs, I get "PHP Fatal error: Call to undefined function curl_init()" as if the extension isn't installed at all. Similarly, a quick `phpinfo()` also yields such as if the extension isn't installed.
Additionally, when I built PHP, I opted the "--enable-curl" flag.
You are probably not loading the extension in the appropriate php.ini. The file should include something like:
[PHP_CURL]
extension=php_curl.dll
Also, --enable-curl is not a PHP configure option. --with-curl=[DIR] is the one you'd want. Check out the cURL installation instructions.
php_curl.dll should be inside PHP's ext directory when configured correctly.
I had same problem after installing php5-curl. I rebooted apache and that fixed it.
sudo /etc/init.d/apache2 restart for ubuntu 12.04
I had similar problem - worked from cli, silently failed from Apache 2.4
I've tried:
1) copying ssleay32.dll and libeay32.dll from php folder into apache\bin folder - didn't work
2) deleting ssleay32.dll and libeay32.dll from apache\bin folder completely - WORKED.
You should restart apache server each time you make change to make it work.
Also you should install both x86 and x64 versions of C++ Resistributable Visual Studio from Microsoft.
I cannot install PHP-CURL on IIS. I think I have tried everything.
My phpinfo() output does not list cURL as available.
I have C:\PHP in my path and working correctly.
I have edited the registry to read from C:\PHP\php.ini. phpinfo() output shows the correct .ini path loaded.
I have uncommented 'extension=php_curl.dll'
I have ssleay32.dll and libeay32.dll availble in C:\PHP
Windows Server 2003
IIS 6
PHP 5.2.4
Try running:
php-cgi.exe -v
and see if any errors come up.
Also make sure the php is correctly in your path by going to the command line and typing:
echo %PATH%
As well make sure the php_curl.dll is in the correct directory and that ssleay32.dll and libeay32.dll are the same versions.
If all else fails try reinstalling PHP as I remember there being some issues a while back with the Curl Module not working on 5.1.4.
As well someone else mentioned installing the thread safe PHP package versus the non-thread package resolving a similar issue.
Did you definitely put php_curl.dll in the directory that PHP reads extensions from? Are the file permissions on it ok? And the big question: where did you get the php_curl.dll from? If you got a precompiled one it might be compiled for a different version of PHP than you are running. Check your webserver logs and see what comes up from PHP when you restart the server/container/whatever.
Update: The problem appears to have been corrupt DLLs somewhere in my PHP installation, or possibly a bug in PHP 5.2.9 on Win2k. I downloaded the windows (binaries-only) distribution of PHP 5.2.10 from php.net and extracted that to my c:\PHP directory. After doing that, everything worked fine.
Update2: I undid everything that I tried earlier (everything from the bulleted list below), except that I left "extension=php_curl.dll" uncommented in my php.ini file. It turns out that is all you should have to do in a proper installation.
I'm trying to get CURL to work on a Windows installation of PHP (version 5.2.9-2), and I am at wit's end. I have found the PHP CURL installation page, this SO question which references this page, and this SO question. I've tried most of the suggestions in all of those pages but I still get an error. Here is my very simple test page:
<?php
$ch = curl_init();
?>
<b>Success!</b>
This gives me:
Fatal error: Call to undefined function curl_init() in C:\ApacheRoot\curltest.php on line 2
In my Apache error log I get this each time the server starts:
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\\PHP\\ext\\php_curl.dll' - The specified procedure could not be found.\r\n in Unknown on line 0
I have done the following:
Uncommented the following line in php.ini: extension=php_curl.dll
Copied ssleay32.dll and libeay32.dll from C:\PHP to C:\WINNT\System32
Downloaded cURL for Win32 from curl.haxx.se and extracted the .zip file to C:\cURL
Added C:\cURL to my system PATH environment variable.
Verified that:
php.ini includes extension_dir="C:\PHP\ext"
The directory C:\PHP\ext contains php_curl.dll
The only php.ini file on my system is in C:\PHP (i.e. especially that there is no C:\WINNT\php.ini)
The Apache httpd.conf file includes the line PHPIniDir "C:/PHP/"
I have also rebooted the machine (several times, in fact...).
You don't have to reboot the computer, just restart the apache and the php module will read the new ini.
Did you change the correct php.ini? In case of doubt
<?php echo 'php.ini: ', get_cfg_var('cfg_file_path'); ?>
can tell you.
Is there something in the error.log of the apache that indicates that something went wrong while loading php and the php_curl.dll?
Did you start the apache as a win32 service? If you did try to start it as a console application. Error messages will show up on the console then. Or start it as a service and take a look at the error.log file and the windows event log (start, run, eventvwr.msc /s).
edit:
"The specified procedure could not be found"
You need a dll that is compatible with your php version and build. Exactly what did you install and where did you get it from?
Try this:
Stop WAMP completely.
Find your WAMP folder: C:\Path\To\WAMP\bin\Apache\ApacheVersion\bin\
Edit that php.ini and uncomment extension=php_curl.dll
Restart WAMP.
That should hopefully solve it.
*EDIT: Do the same thing # C:\Path\To\WAMP\bin\php\PHPVersion\
This is what worked for me
Answered by Soren from another SO thread - CURL for WAMP
"There seems to be a bug somewhere. If you are experiencing this on Win 7 64 bit then try installing apache addon version 2.2.9 and php addon version 5.3.1 and switching to those in WAMP and then activating the CURL extension. That worked for me."
This fixed it for me:
Go to here:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
Download 'php_curl-5.3.13-VC9-x64.zip'
Stop WAMP Server from Running
Extract the file 'php_curl.dll'.
On your local machine, browse to (or where your WAMP installation is found) c:\wamp\bin\php\php5.3.13\ext
Rename php_curl.dll to php_curl.dll.old (or whatever you choose) and then copy the new file into the above directory.
Restart WAMP Server
All should be working ok now.
I had the same problem with php-5.5.26-Win32-VC11-x64 (on Windows) and I tried everything listed here with no luck. Finally I got it working by adding PHP installation directory to windows Path.
With PHP 5.6.9 on Windows Server Core 2012 x64 cURL was not working, not showing up in phpinfo despite uncommenting php_curl.dll extension in my php.ini and restarting the Apache 2.4 service. Added the php path and the php\ext path to my $evn:path. No joy.
Fix: I didn’t need to download any other php_curl.dll file and couldn’t find one for PHP 5.6 anyway. What finally worked was to copy these three files into the Apache24\bin folder then restart Apache:
libeay32.dll
libssh2.dll
ssleay32.dll
Copying these to System or System32 was not needed.
If the problem persists after you uncomment the module from both php.ini files (that people are already talking about and which are located on apache folder and php folder) and even after you check that you got the php_curl.dll ** at
C:\WAMP\bin\php\php5.3.13\ext
YOU SHOULD TRY TO REPLACE THE ORIGINAL DLL THAT COMES WITH WAMPSERVER with one from this website:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
My problem was there!
Hope it helps.