I am fetching an array of floats from my database but the array I get has converted the values to strings.
How can I convert them into floats again without looping through the array?
Alternatively, how can I fetch the values from the database without converting them to strings?
EDIT:
I am using the Zend Framework and I am using PDO_mysql. The values are stored one per column and that is a requirement so I can't serialize them.
array_map('floatval', $array) only works on single dimensional arrays.
I can't floatval the single elements when I use them because I have to pass an array to my flash chart.
The momentary, non-generic solution is to extract the rows and do array_map('floatval',$array) with each row.
You could use
$floats = array_map('floatval', $nonFloats);
There is the option PDO::ATTR_STRINGIFY_FETCHES but from what I remember, MySQL always has it as true
Edit: see Bug 44341 which confirms MySQL doesn't support turning off stringify.
Edit: you can also map a custom function like this:
function toFloats($array)
{
return array_map('floatval', $array);
}
$data = array_map('toFloats', $my2DArray);
How are you getting your data? mysql, mysqli or PDO, some other way or even some other database?
you could use array_map with floatval like so:
$data = array_map('floatval', $data);
but that still executes a loop and i think it assumes you only have one column in your data.
you're probably best of casting to float when you use your value, if you have to. php is likely to do a good job of interpreting it right anyway.
LOL... are you working on the same project I am tharkun?
I just finished (last night) creating something, in a ZF based project, that uses pdo_mysql to retrieve and format data and then output it as xml for use in a flash piece. The values were going in as strings but needed to be floats.
Since I'm also the one who wrote the part that gets the data and the one who created the database I just made sure the data was converted to float before it went into the database.
I simply cast the values as float as part of some other formatting, for what it is worth.
protected function _c2f($input)
{
$input = (float)$input;
$output = round(($input * 1.8) + 32, 2);
return $output;
}
I found an easy way for this operation.
You can do this just by adding foreach loop to your code. foreach loop is used to fetch your array string data one by one. and then, you can simply convert this by function number_format. i used 2 place after convert to float value. i.e it used to print value after dot value 2 place.
$example= array("12.20", "15.05", "55.70");
foreach($example as $float)
{
$update_value = number_format($float,2);
echo $update_value."<br>";
}
Not sure what you're asking here? You can cast a string to a float, using (float) $string, but since PHP is dynamically typed, that will happen anyway, when needed. There is no reason to do an explicit cast.
What are you using floating point values for?
Related
So i am using this PHP code to create the json output, and I am having an issue where it’s creating an array of array with the info. I would like to get rid of one array and just display the list of API’s thats been used and number that has been used.
Looks as though the difference is you have...
"apis":[{"item_search":"0\n"},{"item_recommended":"0\n"}]
and want
"apis":{"item_search":"0\n","item_recommended":"0\n"}
If this is the case, you need to change the way you build the data from just adding new objects each time to setting the key values directly in the array...
$zone_1 = [];
foreach($zone_1_apis as $api_name ) {
$zone_1[substr($api_name, 0,-5)] = file_get_contents('keys/'.$_GET['key'].'/zone_1/'.$api_name);
}
You also need to do the same for $zone_2 as well.
It may also be good to use trim() round some of the values as they also seem to contain \n characters, so perhaps...
trim(file_get_contents('keys/'.$_GET['key'].'/zone_1/'.$api_name))
I've recently updated my server to a newer version of MySQL and PHP 7 for various reasons. On my previous instance, running PHP 5.5, Laravel's response()->json() always converted tinyint's into a string. Now running newer server software, it's returning me int's -as it should...
I'd have to change a lots of my codebase to either cast types / convert them into a string manually, whic I'm trying to avoid at the moment.
Is there a way to somehow force response()->json() to return int's as string's?
Is there a way to somehow force response()->json() to return int's as string's
I don't want to change the code base - do not want to cast types, convert it,
No. There's no option for that. You need to do that yourself if needed.
There is a way to cast integer into string in laravel
in your model you can cast id to string. Its as follows
protected $casts = [ 'id' => 'string' ];
But the downside is that you would have to do that for all Models.
If you don't want to modify a lot of code you could run response data through a quick and dirty function. Instead of going directory to JSON you should instead grab the data as a nested array. Then put it through a function like this:
function convertIntToString ($myArray) {
foreach ($myArray as $thisKey => $thisValue) {
if (is_array($thisValue)) {
// recurse to handle a nested array
$myArray[$thisKey] = convertIntToString($thisValue);
} elseif (is_integer($thisValue)) {
// convert any integers to a string
$myArray[$thisKey] = (string) $thisValue;
}
}
return $myArray;
}
The function will convert integers to strings and use recursion to handle nested arrays. Take the output from that and then convert it to JSON.
The best solution for me is to to use attribute casting and
Fractal transformers
Fractal transformers are extremely useful when you have complex responses with multiple relations included.
You can typecast it to string:
return response->json(["data" => (string)1]);
Edit: I have made a demo to my problem: http://codepad.org/ByNdAdCI
We use the following logic to set our arrays in 32 bit php:
private function formatAvailableOptions($availableOptions) {
$optionsAsArray = array();
foreach($availableOptions as $option){
$optionsAsArray[$option["entity_id"]] = $option["name"];
}
return $optionsAsArray;
}
Problem:
The $option["entity_id"] has grown too big to fit in 32 bit int, and as a result overflow when $optionsAsArray gets created. For example
$optionsAsArray[2147483648] = "hi";
becomes
$optionsAsArray[-2147483648] = "hi";
I need the index to be 2147483648 as it's tied to ids in the database
This code is already shipped to the client, and the logic is used in many places that makes it infeasible to modify every single instance to
$optionsAsArray[strVal(2147483648)] = "hi";
to make it run properly by using string type as key to associative array.
What is the best solution in this case? Is there a global config option for me to force all php arrays to use string as keys to get around this problem?
Seems, that it doesn't like floats as keys ;) So the type cast to float fails. You already mentioned your solution in the question (strVal($var), or (string) $var, or just "$var"). If your customers run PHP in 64bit (what they should ;)) they don't see any difference. Because this is obviously a bug you should consider to fix it and publish an update to your customers. There is no option, or setting, that converts a 32bit installation into a 64bit one on the fly.
What would you say is the most efficient way to get a single value out of an Array. I know what it is, I know where it is. Currently I'm doing it with:
$array = unserialize($storedArray);
$var = $array['keyOne'];
Wondering if there is a better way.
You are doing it fine, I can't think of a better way than what you are doing.
You unserialize
You get an array
You get value by specifying index
That's the way it can be done.
Wondering if there is a better way.
For the example you give with the array, I think you're fine.
If the serialized string contains data and objects you don't want to unserialize (e.g. creating objects you really don't want to have), you can use the Serialized PHP library which is a complete parser for serialized data.
It offers low-level access to serialized data statically, so you can only extract a subset of data and/or manipulate the serialized data w/o unserializing it. However that looks too much for your example as you only have an array and you don't need to filter/differ too much I guess.
Its most efficient way you can do, unserialize and get data, if you need optimize dont store all variables serialized.
Also there is always way to parse it with regexp :)
If you dont want to unseralize the whole thing (which can be costly, especially for more complex objects), you can just do a strpos and look for the features you want and extract them
Sure.
If you need a better way - DO NOT USE serialized arrays.
Serialization is just a transport format, of VERY limited use.
If you need some optimized variant - there are hundreds of them.
For example, you can pass some single scalar variable instead of whole array. And access it immediately
I, too, think the right way is to un-serialize.
But another way could be to use string operations, when you know what you want from the array:
$storedArray = 'a:2:{s:4:"test";s:2:"ja";s:6:"keyOne";i:5;}';
# another: a:2:{s:4:"test";s:2:"ja";s:6:"keyOne";s:3:"sdf";}
$split = explode('keyOne', $storedArray, 2);
# $split[1] contains the value and junk before and after the value
$splitagain = explode(';', $split[1], 3);
# $splitagain[1] should be the value with type information
$value = array_pop(explode(':', $splitagain[1], 3));
# $value contains the value
Now, someone up for a benchmark? ;)
Another way might be RegEx ?
After hours of debugging, I found an error in one of my scripts. For saving different event types in a database, I have an array of unique data for each event that can be used to identify the event.
So I basically have some code like
$key = md5(json_encode($data));
to generate a unique key for each event.
Now, in some cases, a value in the $data array is an integer, sometimes a string (depending on where it comes from - database or URL). That causes the outputs of json_encode() to be different from each other, though - once including quotes, once not.
Does anybody know a way to "unify" the variable types in the $data array? That would probably mean converting all strings that only contain an integer value to integer. Anything else I have to take care of when using json_encode()?
array_walk_recursive combined with a function you have written to the effect of maybe_intval which performs the conversion you talk about on a single element.
EDIT: having read the documentation for array_walk_recursive more closely you'll actually want to write your own recursive function
function to_json($obj){
if(is_object($obj))
$obj=(array)$obj;
if(is_array($obj))
return array_map('to_json',$obj);
return "$obj"; // or return is_int($obj)?intval($obj):$obj;
}