I am trying to setup my ubuntu server, but it seems to me that the php package downloaded has got corrupt as it is not installing the whole package.
When I am trying to reinstall after removing the package with sudo apt-get install php5 it uses the same package which it had downloaded earlier but i want to download a fresh copy how can i do it?
Thank You.
Try running:
locate php5 | grep .deb
Or just clean the apt-cache:
sudo apt-get clean
Related
I have few projects which are developed on php5.5.9. So I am trying to install php5.5.9 in ubuntu 17.10 but it is showing error.
I have used the below command:
sudo apt-get install php5.5
It's showing the following error:
E: Unable to locate package php5.5
E: Couldn't find any package by
glob 'php5.5' E: Couldn't find any package by regex 'php5.5'
Could you please help me.
PHP 5.5 is no longer supported - http://php.net/supported-versions.php
You can install 5.6 using ppa:ondrej/php:
https://launchpad.net/~ondrej/+archive/ubuntu/php
Or you can compile from source, it's not so complicated:
https://secure.php.net/get/php-5.5.9.tar.gz/from/a/mirror
You receive the error because php5 is outdated.
Execute : sudo apt-get install php7.0-imap
on the other way: use version:
try sudo apt-get install php5.5-rpm
or
try sudo apt-get install php5.5-rpm
You can get php5.5 tar file from old archive in php official site.
To install from source I followed this link. Its working good.
I am trying to do a Magento 2 DRC installation on a remote linux server, running Centos 7, Apache 2.4.6, MariaDB and PHP v5.6.9. When I try to install Composer I get the following message:
$ cd /var/www/html/magento2 && composer install
Loading composer repositories with package information
Installing dependencies (including require-dev) from lock file
Your requirements could not be resolved to an installable set of packages.
Problem 1
- The requested PHP extension ext-intl * is missing from your system.
I have installed ext-intl using:
yum list php*intl
and
yum install php-intl
But is still gives me the same message.
I have tried various other installations to get around the problem, to no avail. Any suggestions would be gratefully erceived as it is stalling the project.
Would it help to downgrade to PHP 5.5?
You can follow the below steps for magento2 installation on Centos 7.
http://gotechnies.com/install-magento2-centos-7/
There are few easy steps to install Magento 2(M2) on Centos Distro.
Step 1-:
First of all we need to add few EPEL repositories for the php5.6, mysql-server5.6, and phpmyadmin.
# EPEL Repository for php5.6
$ rpm -iUvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
$ rpm -iUvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
# EPEL Repository for mysql-server5.6
$rpm -iUvh http://repo.mysql.com/mysql-community-release-el7-5.noarch.rpm
# EPEL Repository for phpMyadmin on Centos 7
$ rpm -iUvh http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm
$ yum -y update
Step 2-:
Install Require packages like apache, php5.6, mysql-server, phpmyadmin.
$ yum install-y httpd php mysql-server phpmyadmin php56w-mcrypt php56w-intl php56w-xsl git
To allow the phpmyadmin in apache 2.4 add the line
Require all granted
Readmore go to above link
Magento2 installation on RHEL/Centos 7 with Php7.
Subscribing to the IUS Community Project Repository
Since PHP 7.x is not yet packaged in official repositories for the major distributions, we’ll have to rely on a third-party source. Several repositories offer PHP 7 RPM files. We’ll use the IUS repository.
IUS offers an installation script for subscribing to their repository and importing associated GPG keys. Make sure you’re in your home directory, and retrieve the script using curl:
curl 'https://setup.ius.io/' -o setup-ius.sh
sudo bash setup-ius.sh
Install Required Packages-:
sudo yum install -y mod_php70u php70u-cli php70u-mysqlnd php70u-json php70u-gd php70u-dom php70u-simplexml php70u-mcrypt php70u-intl httpd mysql-server git
See my Article for Complete Installation magento2-php7-centos7-mysql5.7
The extension has to be installed and activated for the command line PHP, not only for the web server PHP. If you run php -i, which is the CLI equivalent of running phpinfo(), you should see a section containing info about the "intl" extension. If this is missing, you'd also see the path to the "php.ini" file that is being used - this is where you should double check whether or not the extension is activated or not.
Most of the time, it is not.
I want to install the v8js extension for PHP5.5 on Ubuntu 12.04 but can't make it working.
When I try to install the v8js extension version 0.2.0 (latest) with PECL, I have this message:
configure: error: libv8 must be version 3.24.6 or greater
ERROR: `/tmp/pear/temp/v8js/configure --with-v8js' failed
If I try to install an old version, I have a compilation error. This message is very similar to my issue: Install v8js for php on ubuntu
How can I fix this issue?
EDIT: I couldn't install it on Ubuntu 14.04 with PHP5.5, even with a PHP downgrade with PHPbrew to PHP 5.4. However, using Ubuntu 12.04 with PHP 5.4 works great. I didn't try the downgrade from PHP 5.5 to 5.4 on Ubuntu 12.04.
in case you can't find libv8-dev or libv8-dbg, you can find the correct version by run command
~$ apt-cache search libv8
libv8-3.14-dbg - V8 JavaScript engine - debugging symbols
libv8-3.14-dev - V8 JavaScript engine - development files for 3.14 branch
libv8-3.14.5 - V8 JavaScript engine - runtime library
libv8-dev - V8 JavaScript engine - development files for latest branch
then you can run
~$ sudo apt-get install libv8-3.14-dev libv8-3.14-dbg g++ cpp
then you can try to install v8js via pecl by running
~$ sudo pecl install v8js-0.2.0
if that command return error like this
configure: error: libv8 must be version 3.24.6 or greater
ERROR: `/tmp/pear/temp/v8js/configure --with-v8js' failed
you can try to install v8js-0.1.3 instead by running
~$ sudo pecl install v8js-0.1.3
then edit your php.ini to add v8js extension
~$ echo "extension=v8js.so" >> /etc/php5/cli/php.ini
Open your terminal/console
sudo apt-get install libv8-dev libv8-dbg g++ cpp
Make an update sudo apt-get update
Try sudo pecl install v8js-0.2.0 (or other version i.e.: sudo pecl install v8js-0.1.3)
Edit your php.ini (Check: Where is my php.ini file?) file by adding: extension=v8js.so.
Restart server
If it the extension still doesn't work, try to edit /etc/php5/conf.d/v8js.ini and add extension=v8js.so and restart server again.
Hope this helps.
These other answers work well and I used v8js-0.1.3 for the past 1.5 years but after needing to upgrade to PHP 7 I needed a better solution as v0.1.3 doesn't compile with PHP 7 (something to do with php_smart_str being renamed to php_smart_string).
After a couple hours of frustrating research and compiling libv8 myself, I didn't want to have to go through this whole process on every server I provisioned.
Anyway, I found this site which points you to a launchpad PPA site that provides a couple different ubuntu packages with the 5.1 and 5.2 libv8 libraries.
I ran these commands (please don't add repositories of 3rd party devs without understanding the risks).
sudo apt-add-repository ppa:pinepain/libv8-5.2
sudo apt-get update
sudo apt-get install libv8-5.2-dev
sudo pecl install v8js-1.1.0
(Thanks #JeyKeu for suggesting to add "apt-get update" to these commands)
I couldn't get v8js-1.3.0 or 1.2.0 to build, but 1.1.0 worked well. I checked the changelog and found that the latest updates are not necessary in my circumstance anyway.
I'm trying to install Facebook PHP SDK with Composer. This is what I get
$ composer install
Loading composer repositories with package information
Installing dependencies (including require-dev)
Your requirements could not be resolved to an installable set of packages.
Problem 1
- Installation request for facebook/php-sdk dev-master -> satisfiable by facebook/php-sdk[dev-master].
- facebook/php-sdk dev-master requires ext-curl * -> the requested PHP extension curl is missing from your system.
Problem is, I have curl extension enabled (uncommented in php.ini). When I run phpinfo(), it says it's enabled.
Only clue I have is that when I run $ php -m, 'curl' line is missing but I don't know what to do about it.
I have wamp 2.4 on Win8 and I'm running composer in cmd.exe.
This is caused because you don't have a library php5-curl installed in your system,
On Ubuntu its just simple run the line code below, in your case on Xamp take a look in Xamp documentation
sudo apt-get install php5-curl
For anyone who uses php7.0
sudo apt-get install php7.0-curl
For those who uses php7.1
sudo apt-get install php7.1-curl
For those who use php7.2
sudo apt-get install php7.2-curl
For those who use php7.3
sudo apt-get install php7.3-curl
For those who use php7.4
sudo apt-get install php7.4-curl
For those who use php8.0
sudo apt-get install php8.0-curl
Or simply run below command to install by your version:
sudo apt-get install php-curl
This worked for me: http://ubuntuforums.org/showthread.php?t=1519176
After installing composer using the command curl -sS https://getcomposer.org/installer | php just run a sudo apt-get update then reinstall curl with sudo apt-get install php5-curl. Then composer's installation process should work so you can finally run php composer.phar install to get the dependencies listed in your composer.json file.
on php7 run for example:
> sudo apt-get install php-curl
> sudo apt-get install php-mbstring
for every missing extension. Then:
> sudo apt-get update
and finally (in the project's root folder):
> composer install
As Danack said in comments, there are 2 php.ini files. I uncommented the line with curl extension in the one in Apache folder, which is php.ini used by the web server.
Composer, on the other hand, uses php for console which is a whole different story. Php.ini file for that program is not the one in Apache folder but it's in the PHP folder and I had to uncomment the line in it too. Then I ran the installation again and it was OK.
I ran into the same issue trying to install Dropbox SDK.
CURL was indeed enabled on my system but this meant by the php.ini in the wamp\bin\apache folder.
I simply had to manually edit the php.ini situated in wamp\bin\php, uncomment the extension=php_curl.dll line, restart Wamp and it worked perfectly.
Why there are those 2 php.ini and only one is used is still a mystery for me...
Hope it's helpul to someone!
I had this problem after upgrading to PHP5.6. My answer is very similar to Adriano's, except I had to run:
sudo apt-get install php5.6-curl
Notice the "5.6". Installing php5-curl didn't work for me.
For anyone who encounters this issue on Windows i couldn't find my answer on google at all.
I just tried running composer require ext-curl and this worked.
Alternatively add the following in your composer.json file:
"require": {
"ext-curl": "^7.3"
}
According to https://github.com/composer/composer/issues/2119 you could extend your local composer.json to state that it provides the extension (which it doesn't really do - that's why you shouldn't publicly publish your package, only use it internally).
I ran into a similar issue when trying to get composer to install some dependencies.
It turns out the .dll my version of Wamp came with had a conflict, I am guessing, with 64 bit Windows.
This url has fixed curl dlls: http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
Scroll down to the section that says: Fixed Curl Extensions.
I downloaded "php_curl-5.4.3-VC9-x64.zip". I just overwrote the dll inside the wamp/bin/php/php5.4.3/ext directory with the dll that was in the zip file and composer worked again.
I am running 64 bit Windows 8.
Hope this helps.
if use wamp go to:
wamp\bin\php\php.5.x.x\php.ini
find:
;extension=php_curl.dll
remove (;)
Enable in php 7 try below command
sudo apt-get install php7.0-curl
Not sure why an answer with Linux commands would get so many up votes for a Windows related question, but anyway...
If phpinfo() shows Curl as enabled, yet php -m does NOT, it means that you probably have a php-cli.ini too. run php -i and see which ini file loaded. If it's different, diff it and reflect and differences in the CLI ini file. Then you should be good to go.
Btw download and use Git Bash instead of cmd.exe!
I have Archlinux with php 7.2, which has Curl integrated, so no amount of configuration voodoo would make Composer see ext-curl, that PHP could see and work with happily. Work around is to use Composer with --ignore-platform-reqs.
eg composer update --ignore-platform-reqs
Reference = https://github.com/composer/composer/issues/1426
try install php5-curl by using below snippet.
sudo apt-get install php5-curl
if it won't work try below code i m sure it will work fine.
sudo apt-get install php-curl
for me it worked... all the best :)
In my case I moved from PHP5 to PHP7 and I ve got this error,
Simply go to your /bin/php/php7/php.ini , then uncomment extension=php_curl.dll and restart your server, re-run your composer install.
If you getting error like php7.2-curl doesn't have installable candidate or not locate any package or dependencies is php7.2-common Or libcurl3 Do this
You have to tackle in mature way. Install aptitude these ubuntu package manager will finds all dependencies, and will install one by one.
apt-get install aptitude
Now you have to check if aptitude can download it or not if download it follow instructions
sudo aptitude install php7.2-curl
If you have gotten any error like this
E: Unable to locate package php7.2-curl
E: Couldn't find any package by glob 'php7.2-curl'
Any type on error i'm not talking about proper these errors
Try to add php package again
sudo apt-add-repository ppa:ondrej/php
sudo apt-get update
Now try this command
sudo aptitude install php7.2-curl
Aptitude will ask you you want to keep current version of all dependencies
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) php7.2-curl [Not Installed]
Accept this solution? [Y/n/q/?]
Type n then Enter
Aptitude will find all dependencies and ask you to install all package type
y
Again
y
Then
systemctl restart apache2
For centos of rhel
systemctl restart httpd
It will Not enabling PHP 7.2 FPM by default.
NOTICE: To enable PHP 7.2 FPM in Apache2 do
a2enmod proxy_fcgi setenvif
a2enconf php7.2-fpm
This method is not only for this error you can find any of php apache2 or ubuntu system package solution using aptitude.
Upvote if you find your solution
If you are ubuntu, this will work for you.
composer update --ignore-platform-reqs
I am installing mysql and php on CentOS 6. While trying to install phpMyAdmin i am getting the following error on command prompt
No package phpMyAdmin available.
Nothing to do
I am following the below tutorial to install and configure my server. This is my first attempt to install and setup my server
LINK
Please guide me
Thank you
I wanted the latest version (4.0.5), not the 3.5 version in EPEL and found this information which worked perfectly for me:
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm
yum --enablerepo=remi install phpmyadmin
from http://www.if-not-true-then-false.com/2012/install-phpmyadmin-on-fedora-centos-red-hat-rhel/
Phpmyadmin isn't shipped with Centos. But there are unofficial repositories for phpmyadmin. I suggest you install the EPEL.
rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-7.noarch.rpm
or
rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
and than install using the enablerepo flag
yum --enabledrepo=epel install phpmyadmin
At the moment the phpmyadmin package in the epel repo is not the latest version (4.0.3), but it's the most recent 3.5.x version.
A small warning: don't install phpmyadmin from the RPMforge repo. Since this repo is somewhere at version 2.
It's about two months since the questions was asked, so I don't expect to be of any use to the original question author, but there are always people visiting old questions with the same problem.
To get the packages we need, we'll have to add an additional repo to our system. The EPEL repo (Extra Packages for Enterprise Linux) contains many additional packages, including the phpMyAdmin package we are looking for.
The EPEL repository can be made available to your server by installing a special package called epel-release. This will reconfigure your repository list and give you access to the EPEL packages.
To install, just type:
sudo yum install epel-release
Now that the EPEL repo is configured, you can install the phpMyAdmin package using the yum packaging system by typing:
sudo yum install phpmyadmin
You can't find it as the directions state you need to add the package (myAdmin) to your repository first, update then install with Yum. You need to search an alternate way to add to your repo , then update ya repo, then install :)
For that you can download phpMyAdmin from here
after downloading use rpm -ivh packagename.rpm or follow your tutorial it wont show above error
You can just download phpmyadmin from here:
https://www.phpmyadmin.net/
and unzip and move to apache root directory
then you can check that in your url.
sudo yum install epel-release
-some version this command not works
To Install Phymyadmin sometimes this command not works
so use this below command
sudo amazon-linux-extras install epel