I have an array like this:
$categories_array = array(
[0] => 'category_1',
[1] => 'category_2',
[2] => 'category_3',
[3] => 'category_4'
)
I'd like to "filter" the array to get a new one. For example, I'd like to have a new array with only 'category_2' and 'category_3' like this:
$new_categories_array = array(
[1] => 'category_2',
[2] => 'category_3',
)
How can I accomplish this result?
unset($new_categories_array[0]);
unset($new_categories_array[3]);
..might do the trick
See
array_diff — Computes the difference of arrays
array_intersect — Computes the intersection of arrays
Example:
$original = array('category_1','category_2','category_3','category_4');
$new = array_diff($original, array('category_1', 'category_4'));
print_r($new);
Output:
Array
(
[1] => category_2
[2] => category_3
)
When using array_intersect the returned array would contain cat 1 and 4 obviously.
Use preg_grep:
$new_categories_array = preg_grep('/category_[23]/', $categories_array);
While I agree preg_grep is a good solution in your example, if you want a more general case function, look at array_filter - http://ca.php.net/manual/en/function.array-filter.php
Related
I want to need multiple array combaine in one array
I have array
array(
0=> test 1
)
array(
0=> test 2
)
array(
0=> test 3
)
I need expected output
`array(
0=>Test1
1=>Test2
2=>test3
)`
You can use the array_merge() for this. The array_merge() function merges one or more arrays into one array.If two or more array elements have the same key, the last one overrides the others.
Syntax:
array_merge(array ...$arrays): array
Example:
$a1=array("red","green");
$a2=array("blue","yellow");
print_r(array_merge($a1,$a2));
Result:
Array ( [0] => red [1] => green [2] => blue [3] => yellow )
You can check more here.
$a = array('test_1');
$b = array('test_2');
$c = array('test_3');
print_r(array_merge($a,$b,$c));
O/P - Array ( [0] => test_1 [1] => test_2 [2] => test_3 )
Hope you are doing well and good.
So, as per your requirement i found solution to get result.
$array1 = [0 => "Test 1"]; $array2 = [0 => "Test 2"]; $array3 = [0 => "Test 3"];
print_r(array_merge($array1,$array2,$array3));
In the above example you have to merge the n number of array with single array, so for that you need to use array function which is array_merge(array ...$array).
What is array_merge()?
The array_merge() function merges one or more arrays into one array.
Tip: You can assign one array to the function, or as many as you like.
Note: If two or more array elements have the same key, the last one overrides the others.
I have lot arrays and i want to only print number of 2 and first arrays
i use array_slice but there is still a problem
Arrays:
Array
(
[0] => 441
[1] => Awesome
)
Array
(
[0] => 570
[1] => Noons
)
Array
(
[0] => 571
[1] => Roods
)
I need to like this:
Array
(
[0] => 441
[1] => Awesome
)
Array
(
[0] => 570
[1] => Noons
)
Basically you seem to only need:
array_slice(array_unique(array_column($Myarrays, 'nidtitle')), 0, 2);
This should be done instead of the entire code you use to generate the arrays.
Short explanation:
array_column will get the element nidtitle from each "row" (array entry) in $Myarrays
After that we run that column through a unique function
Then we get the first 2 elements with an array_slice
This should do the job:
$finalarray = array_slice($Myarray, 0, 2);
print_r($finalarray);
You can use array_slice to get the items you want.
$arr = array(Array(441,"Awesome"),
Array(570,"Noons"),
Array(571,"Roods"));
$two = array_slice($arr, 0,2);
Var_dump($two);
Array_slice second parameter is where the slice should start.
Third parameter is count of values to slice.
https://3v4l.org/NPcJT
i have this multidimensional array.
Array
(
[0] => Array
(
[car] => Toyota
)
[1] => Array
(
[car] => Ford
)
[2] => Array
(
[car] => Isuzu
)
[3] => Array
(
[car] => Chevrolet
)
)
i want to put them into indexed array like this..
Array = ("Toyota", "Ford", "Isuzu", "Chevrolet");
$result = array_map(function($item)
{ return $item['car']; }, $array);
Some functional approach. array_map
P.S. PHP has no indexed arrays
foreach($yourArray as $carArray)
{
$result[]=$carArray["car"];
}
And your understanding of indexed arrays is wrong. That example output you've shown contains all those values, not indexes, and since you didn't specify an index it will start from 0 and so on.
Option using array_map(), assuming your initial array is $arr
$new_arr = array_map(function($x){return $x['car'];}, $arr);
See demo
try using foreach and array_values, then save it into empty array. Hope it helps.
I have an array in PHP that looks like
Array ( [123654] => Array ( [0] => 123456789123456789 [1] => 1 [2] => 06/24/2011 [3] => 06/24/2012 [4] => 12355.44 [5] => 55321.55 ) )
I know in javascript I could access the data I need by doing array[0][0], how would I go about doing this in PHP. It is the 123456789123456789 value that I'm looking at getting.
Try this
array_slice($array, 0, 1);
http://php.net/array_slice
If you don't know the exact keys, you could do something like this:
$a = array_values($my_array);
$b = array_values($a[0]);
echo $b[0];
array_values replaces the keys by simple numbers from 0 to n-1 (where n is the count of values), by that you can access your desired value with the indexes [0][0]. See more here
http://codepad.org/YXu6884R
Here you go. See above for proof. The methodology from #azat is not explicit enough and is prone to risk if the elements of the array or sub array are re-arranged or if the key value for the super array changes.
$my_array = array( 123654 => array( 0 => '123456789123456789', 1 => '1', 2 => '06/24/2011', 3 => '06/24/2012', 4 => '12355.44', 5 => '55321.55' ) );
echo $my_array['123654'][0];
Try
$first = array_shift(array_values($array));
http://php.net/manual/en/function.array-shift.php
I have an array with some value like this:
[Organization_id] => Array
(
[0] => 4
[1] => 4
[2] => 4
)
but i want some thing like this:
[Organization_id] => Array
(
[0] => 4
)
Thanks in advance..
If you don't care about the key to value association possibly messing up, you can use this:
$array = array_unique($array);
Although array_unique was mentioned twice now, I feel the answers failed to point out that you have to use the function on the nested array and not the array itself, so here is a usage example
$array = array( 'Organization_id' => array(4,4,4) );
$array['Organization_id'] = array_unique( $array['Organization_id'] );
print_r($array);
which will do what you want.