I have spent a lot of time on this with no end product.
Installed MAMP.
Found "make" (was installed in different folder)
Installed autoconf which was missing so I can run phpize
Downloaded, compiled and installed xdebug according to:
http://www.xdebug.org/find-binary.php
Made necessary changes to correct php.ini.
Restarted MAMP - but phpinfo() does not show xdebug.
No matter what I do to the php.ini file located at /Applications/MAMP/conf/php5.3/php.ini, nothing changes. The site still loads fine. Even if I nuke it completely. Yet that is what phpinfo() shows it is loading.
What am I overlooking?
php.ini
[xdebug]
zend_extension=/Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/xdebug.so
xdebug.remote_enable=1
xdebug.remote_host=localhost
xdebug.remote_port=9000
xdebug.remote_autostart=1
The site where you can download precompiled binaries of xdebug had been down all morning (activestate) which is why I was trying to compile my own.
I just found out the site was back online, downloaded the xdebug.so file, and it is now loading.
Modern MACs have two kinds of binaries - 32-bit and 64-bit. Verify that you PHP matches your xdebug: do file Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/xdebug.so then file /path/to/mamp/Library/modules/php5.3/libphp5.so and see if they both show i386 or x86_64.
I just did it and it worked. Here is what I did:
install PECL in order to install Xdebug
download http://pear.php.net/go-pear.phar
in the download directory execute php -d detect_unicode=0 go-pear.phar
now add the ~/pear/bin folder to your path echo "export PATH=$PATH:/Users/the-user/pear/bin" >> .bash_profile
and make the change visible to your terminal . .bash_profile
install Xdebug
now that you have PECL it's as easy as sudo pecl install xdebug
now you need to add a line to php.ini
the php.ini on my mac (Lion) is /etc/php.ini.default
search for zend_extension and uncomment the line if it is correct or change it if it is not (in my case it was correct)
That's it. Unless you want to debug form IntelliJ Idea. In which case I had to copy /etc/php.ini.default to /etc/php.ini
have fun with PHP
Just to point out the obvious, but one that I keep throwing away time on; in an apache2 environment remember to restart apache2 for the changes to take effect.
sudo apachectl restart
Related
So macOS High Sierra 10.13 now comes with PHP 7.1. While configuring Apache I also created a new /etc/php.ini from the /etc/php.ini.default file, made sure to check that is was being loaded by PHP after restarting Apache, however the version of Xdebug extension that ships with macOS 10.13 doesn't seem to load or show up when you run phpinfo();
My php.ini is definitely being loaded:
$ php -i | grep php.ini
Configuration File (php.ini) Path => /etc
Loaded Configuration File => /etc/php.ini
Here's what my /etc/php.ini looks like where I configure Xdebug:
[xdebug]
zend_extension = "/usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so"
xdebug.remote_enable=on
xdebug.remote_log="/var/log/xdebug.log"
xdebug.remote_host=localhost
xdebug.remote_handler=dbgp
xdebug.remote_port=9000
[Update, fixed that typo here...]
However, Xdebug doesn't load and checking php -i give no results:
$php -i | grep xdebug
PHP Warning: Method xdebug_start_function_monitor() cannot be a NULL
function in Unknown on line 0
PHP Warning: xdebug: Unable to register functions, unable to load in Unknown on line 0
Segmentation fault: 11
And yes, the path to the file is correct:
$ ls /usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so
/usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so*
This used to work on PHP 5 so I hope someone can help me and anyone else in future struggling with this issue.
When I check my apache log I get the following error:
Failed loading /usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so: dlopen(/usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so, 9): Symbol not found: _xdebug_monitored_function_dtor
Referenced from: /usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so
Expected in: flat namespace
in /usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so
I'm not making progress in terms of find out how I can resolve this error:
Symbol not found: _xdebug_monitored_function_dtor
Ok so I finally got it running myself it works perfectly! I'm assuming that the xdebug binary that comes with macOS High Sierra (found under: /usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so) is not compatible with PHP7's new Zend engine.
So I downloaded the latest source from the xdebug website and did the following:
Installed autoconf with brew;
Run phpize to configure the build for the new Zend engine;
Run ./configure
Run make
Now the new binary is under modules/xdebug.so
However macOS System Integrity Protection (SIP) will prevent you from overwriting the xdebug.so under /usr/lib/php/extensions/. I didn't want to disable this so I created a new directory path under /usr/local/lib/php/extensions/ and copied the new binary to this location. I'm not sure if this directory is the best place to put it or if this is bad practice but it worked for me.
Finally I reconfigured my php.ini to use the new binary and everything worked perfectly!
In order to install it you have to have xcode command line tools.
So you need to run:
xcode-select --install
Then you need to install autoconf:
brew install autoconf
Then you have to download the code from here.
After that you have to run in the folder of the source code:
phpize
./configure
make
sudo cp modules/xdebug.so /usr/local/php/extensions (if the directory doesn't exist go and create it)
And finally inside php.ini add
zend_extension=/usr/local/php/extensions/xdebug.so
After that you can enable xdebug inside php.ini and restart apache
sudo apachectl restart
you made a typo in "zend_extention". this should be zend_extension.
and i think the full path is unnecessary
zend_extension=xdebug.so
should be enough
If you have brew installed with multiple PHP versions i.e. 7.1, 7.2 and 7.3 on Mac OS X mojave, you can to do the following:
Install autoconf with brew brew install autoconf.
Change to the PHP version that you want Xdebug on, run brew unlink php#7.1 && brew link --force --overwrite php. This will switch from PHP 7.1 to PHP 7.3.
Download the latest Xdebug source from xdebug website.
Extract the Xdebug tar and navigate to extracted directory, where you'd see all the files.
Run phpize to configure the build for the new Zend engine.
Run ./configure.
Run make.
Xdebug extension xdebug.so gets compiled in modules directory.
Create a new directory path under /usr/local/lib/php/7.3.1/extensions/ and copy xdebug.so to this location. Here, 7.3.1 is the current version that I switched earlier, change this to match your PHP version.
Open php.ini in an editor and enter
zend_extension="/usr/local/lib/php/7.3.1/extensions/xdebug.so" then save the change.
Run php -v and it will show Xdebug has been configured correctly.
If you want to configure Xdebug on another PHP version then just repeat from step 2 all the way to 11. As mentioned in earlier post, this way you don't need to disable/enable System Integrity Protection on Mac OS X.
For anyone arriving late at this party, the initial attempt in the question seems to work just fine in macOS 10.13.6
Hello for everyone that got error trying to install xDebug on Mac.
error: unknown type name 'uint64_t'
There are files in your local/bin/include that causes this error. By removing them you get rid of the error. Though, you might have to reinsatall brew.
https://github.com/cython/cython/issues/2009
I've just installed the latest XAMPP for PHP 5.6 from the official website, and I need to enable Xdebug, I find that the file php_xdebug.dll exists in the C:\xampp\php\ext , but there is no [XDebug] config at all in the php.ini and I have no idea how to make it work. It should be installed by default and pre-configured, we need just to uncomment the xdebug config in php.ini but it's not the case. I even tried to install it again using PECL commmand pecl install xdebug but I get the following error :
pecl install xdebug
downloading xdebug-2.5.0.tgz ...
Starting to download xdebug-2.5.0.tgz (267,640 bytes)
.........done: 267,640 bytes
ERROR: failed to mkdir C:\php\pear\docs\xdebug\contrib
And in PHPStorm when I choose to add the interpreter by selecting the php.exe in the XAMPP directory, it says Debugger : Not installed too.
I re-installed XAMPP, but I still have the same problem.
Thanks in advance.
For more details, you can find a tutorial that explains step by step procedure
php-debugging-with-xdebug-atom-and-xampp
As per this tutorial please follow these steps its works like a charm:
Steps to Install Xdebug:
Download xdebug-2.4.0.tgz
Unpack the downloaded file
# navigate to the downloaded file
$ cd ~/Downloads
$ tar -xvzf xdebug-2.4.0.tgz
$ cd xdebug-2.4.0
run phpize
$ phpize
# example output
Configuring for:
PHP Api Version: 20131106
Zend Module Api No: 20131226
Zend Extension Api No: 220131226
#Error possibilty
Cannot find autoconf. Please check your autoconf installation and the
$PHP_AUTOCONF environment variable. Then, rerun this script.
#In the above error case you need to install autoconf using below command(MAC) and rerun phpize
$ brew install autoconf
The phpsize command is used to prepare the build environment for a
PHP extension.
Configure it by run:
$ ./configure
run make
$ make
A successful install will have created xdebug.so file.
Steps to Configure Xdebug:
A successful install will have created xdebug.so and put it into the PHP extensions directory.
You must copy this file to XAMPP php extension directory for that
run:-
$ sudo cp modules/xdebug.so /Applications/XAMPP/xamppfiles/lib/php/extensions/no-debug-non-zts-20160303
Finally update /Applications/XAMPP/xamppfiles/etc/php.ini and add
the following lines to it
[Xdebug]
zend_extension = /Applications/XAMPP/xamppfiles/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so
xdebug.remote_enable=1
xdebug.remote_connect_back=On
xdebug.remote_port="9000"
xdebug.profiler_enable=0
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_autostart=true
Restart Apache using XAMPP’s manager-osx
Congratz! You have completed!! To verify you successfully installed & configured XDebug, open the XAMPP phpinfo.php file in a web browser, for example, http://localhost/dashboard/phpinfo.php.
Search for XDebug section in PHPInfo details. If it exists, you successfully have done your installation
OR
In another browser window or tab, open https://xdebug.org/wizard.php and copy the phpinfo.php page content in the first window or tab and paste it into the textbox on the xdebug.org page. Then submit for analysis, it will give a summary of your installation status.
Safest was is to use XDebug wizard that will give you step by step instructions on how to install on your own machine. Then update your php.ini (tune to your needs)
Note: Wizard will give you instructions for what SAPI it receives phpinfo() contents from. So if you fill CLI phpinfo() output you will get instructions for your PHP CLI. If you paste phpinfo() from a server page you will get instructions for that.
First copy your phpinfor() content form. paste the [xdebug wizard][1] [1]: https://xdebug.org/wizard. then download the xdebug.dll. after that follow this steps
Remove the exists php_xdebug.dill and paste the xampp\php\ext\php_xdebug.dll
update the php.ini like this
[Xdebug] zend_extension = "C:\xampp\php\ext\php_xdebug.dll"
xdebug.remote_enable=1 debug.remote_autostart=true
I found a solution for xdebug not working even after xdebug has been installed in NetBeans +xampp here. The idea is you have to use all the settings for php.ini mentioned here and not just the usual ones mentioned in forums.
Edit: I've now removed the version of xdebug.so I installed manually, and installed XDebug via Homebrew. When I type "php -i" at the command line, xdebug appears to be installed; but when I run phpinfo(), there's still no sign of XDebug.
I've just got a new Mac so, like every time I buy a new Mac, I have rebuilt my local web development environment (this time, following an amazing tutorial: https://echo.co/blog/os-x-1010-yosemite-local-development-environment-apache-php-and-mysql-homebrew)
Everything has gone smoothly until I got to installing the XDebug extension. I use Komodo as a development environment so, as I've always done in the past, I followed the instructions here: http://docs.activestate.com/komodo/7.1/debugphp.html#debugphp_top
I followed the instructions to the letter, but I can't get xdebug.so to appear in my phpinfo.php() page. Here's what I did:
Created a phpinfo.php file so that I can find the correct php.ini file
Checked that phpinfo.php file and found that the "Loaded Configuration File" is "/usr/local/etc/php/5.6/php.ini"
Edited that php.ini, adding the following lines to the bottom of the file:
_
zend_extension=/usr/local/Cellar/php56/5.6.14/lib/php/extensions/no-debug-non-zts-20131226/xdebug.so
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=localhost
xdebug.remote_port=9000
xdebug.idekey=<idekey>
; You may also want this - to always start a remote debugging connection.
;xdebug.remote_autostart=1
Ran "brew services restart httpd22" (and, just to be sure, "sudo apachectl restart")
When I go reload phpinfo.php, it contains to reference to xdebug.so.
I can confirm that xdebug.so is present at /usr/local/Cellar/php56/5.6.14/lib/php/extensions/no-debug-non-zts-20131226 and that /usr/local/Cellar/php56/5.6.14/lib/php/extensions/no-debug-non-zts-20131226 is set as the "extension_dir" in php.ini.
What am I missing?!
Ultimately this proved be to be caused my me doing things in the wrong order. I'd used Homebrew to install Apache and PHP, but I'd installed Apache 2nd: this meant that it wasn't set up to work with the version of PHP I then installed.
I reinstalled PHP using the command brew reinstall php54 --homebrew-apxs, and that ensured that Apache and PHP were talking to each other.
Then, to install xdebug, I ran brew install homebrew/php/php56-xdebug. After restarting Apache, XDebug showed up in phpinfo() straight away!
Then I had to get XDebug talking to Komodo. To do this I added in the config lines from my original post to the specific xdebug config file that had been created during the Homebrew install (mine was located at /usr/local/etc/php/5.6/conf.d/ext-xdebug.ini), and then made sure that Komodo was listening on the correct port (9000 didn't work, so I changed to 9001).
I am trying to follow this article:
http://robshouse.net/article/xdebug-komodo-and-acquia-drupal-stack-installer
I did all of that, yet XDebug is still not being loaded or shown on phpinfo.
Has anyone got this to successfully work?
I installed XDebug with Homebrews, brew install xdebug. I copied xdebug.so to my acquia stack folder, /php/ext/xdebug.so and added the approrpiate lines to php.ini, restarted the stack and Apache and no luck.
Tried a few different articles and have not had success.
My php.ini:
[debug]
; Remote settings
zend_extension=/Applications/acquia-drupal/php/ext/xdebug.so
xdebug.remote_autostart=off
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=localhost
xdebug.remote_port=9000
This is reported in my apache errors:
Failed loading /Applications/acquia-drupal/php/ext/xdebug.so
But the file does exist there.
The author of robshouse.net moved his website to Drupal Gardens and did not migrate the article linked to in the question. However the article is somewhat outdated.
You do not need to download anything to enable xdebug in current versions of Acquia Dev Desktop.
Simply uncomment the line that mentions xdebug in /Applications/acquia-drupal/php5_*/bin/php.ini. There are three of these for PHP versions 5.2 5.3 and 5.4 respectively. Make the change in all of them (unless you know better).
You will need to stop and start Acquia Dev Desktop for the change to take effect.
For php -v 7.0.3 users:
ssh: Brew update && upgrade
ssh: brew install homebrew/php/php70-xdebug
ssh: php -m
Check that the module is installed. Then copy the entire
usr/local/Cellar/php70/7.0.3/ content to - >
Applications/DevDesktop/php7_0/
ssh: nano /usr/local/etc/php/7.0/php.ini
configure xdebug.so:
ssh: sudo cp /usr/local/etc/php/7.0/php.ini
/Applications/DevDesktop/php7_0/bin/
DONE :-)
I didn't get the XDebug to work either with Homebrew.
Get the working xdebug.so from ActiveState.
http://code.activestate.com/komodo/remotedebugging/
Article about this:
http://debuggable.com/posts/setting-up-xdebug-on-mac-os-x-or-win32-linux:480f4dd6-0240-4a90-8fa1-4e41cbdd56cb
I'm trying to install zend debugger in my Ubuntu 9.04 machine, I've done it in win. but not in linux, I hope you could help me, this is what I've done:
1)Copied the file ZendDebugger.so to /etc/php5/apache2 (didn't choose this folder for anything in special).
2)Added this lines to php.ini:
zend_extension="/etc/php5/apache2/ZendDebugger.so" zend_debugger.allow_hosts=127.0.0.1,127.0.1.1,localhost,*
zend_debugger.expose_remotely=always
I've also tried without quotes(zend_extension=/etc/php5/apache2/ZendDebugger.so)
3)Copied file dummy.php to /var/www
And then restarted Apache but I didn't see the information about Zend Debugger in the phpinfo(), the only related thing I found there was report_zend_debug On.
Thanks in advance
I found much more easy to install Xdebug in my Ubuntu machine.
sudo mv /etc/php5/apache2/ZendDebugger.so /usr/lib/php5/20060613/ZendDebugger.so
This is where your memcache.so, apc.so, etc. are located. Unless you modified your php extensions directory that is where new exts should go.
In php.ini:
zend_extension=/usr/lib/php5/20060613/ZendDebugger.so
cd to that directory and chmod a-x ZendDebugger.so to remove executable bits from the .so.
sudo /etc/init.d/apache2 stop
In another terminal window, tail -f /var/log/error.log and clear console so it is easy to see new log entries coming in (cmd-k on macos).
Then:
sudo /etc/init.d/apache2 start
If there are no errors in error.log, check phpinfo() and see if the debugger section shows up.
You might get errors in the configuration of other php extensions that occur further up in php.ini (e.g., xcache or eaccellerator) that will make loading stuff further down in php.ini problematic.
This is a baseline setup and should work if there are no other problems.
You can also try to install Zend Server Community Edition
You'll get Zend Debugger enabled by default, along with some other nice features. There is a link to the deb repository available through the download page.
I followed the same steps that you did with the same result. In the end the problem was that I was trying to load a 32bit binary with apache running in 64bit mode base (as described in this post) I was able to get it running immediately by doing the following.
stopping apache
executing sudo arch -i386 /usr/sbin/httpd
restarting apache.
After replacing the 32bit binary with the 64bit binary everything worked as expected with no special apache handling. There was also some facepalming involved, but it did not affect the overall outcome.