I am new to Windows IIS and I need to run a php/mysql application on it. For local php development on windows, I have found WAMP to be the easiest.
But can WAMP be used in this case instead of installing php and mysql separately ?
This needs to be done on an ec2 Windows 2003 instance. So far, I have already tried installing WAMP and setting up apache to listen on port 8080 instead of 80. From inside the remote desktop, both IIS and WAMP work properly in parallel on their respective ports.
However, when I try to connect from another computer using the ip address http://184.**.***.***, IIS works fine serving the default web page but cannot connect to apache on http://184.**.***.***:8080.
Is it possible to use WAMP at all for this purpose and if yes, would there be any disadvantages in using it instead of installing php/mysql seperately ?
Edit :
I dont know if this is a problem of blocked 8080 port. To verify this I stopped IIS and configured apache to listen to 80. Even then http://184.**.***.*** doent show the WAMP homepage. IS anything needed to be configured in IIS ?
RESOLVED :
Added the port 80 in Windows Firewall Exceptions and it started working.
Also, its necessary to select "Put Online" in the WAMP tray otherwise it gives a forbidden response as suggested by some answers.
Thanks
I haven't used EC2 in this way before, but broadly speaking, I'd encourage you to use the same server for development and production environments if at all possible - the installation effort can be a bit of a pain, but it's nothing compared to developing an app locally and then finding an IIS configuration issue causes it to break on production.
This approach also lets you keep your PHP configurations in source code control - php.ini and any modules you're using - and automatically deploy them alongside your application; again, forgetting to deploy the correct PHP.ini usually makes your application do crazy things...
So, your choices appear to be:
- switch off IIS and have WAMP listen to port 80. Not sure WAMP is designed for production level traffic, but in the past, I've run low-traffic public websites in this way.
- work out why port 8080 is blocked, and if it can be unblocked. This would still require you to run your website on an unusual port, which makes for ugly and hard-to-communicate URLs.
- install PHP on your IIS instance. One benefit of having installed WAMP is that MySQL should already be up and running, and the basic PHP installation should also be there; getting PHP to run on IIS is no longer a dark art ([http://php.iis.net][1])
For my money, I'd go for the latter option...IIS is a production quality server, and it's clearly what Amazon want you to use in this instance.
Of course, running IIS on your development environment may be a problem.
Have you put the server online? Think it is offline by default, meaning it's only accessible from your local machine. It's an option in the systray menu to put it online.
If I remember well, there is an option "go public" (or "put online") on the system traya icon of wamp.
This option modifies the httpd.conf to authorize public access.
You should give a try.
On a side note, you can make php work with IIS. This is another option to help you manage your server. (Mysql and Php have to be installed separatly but, this is very easy to do as far as I remember :) )
Related
I got some trouble with my xampp on Win 10, as so many have had before me...
It's the same old port problem with skype and IIS.
I used to quit skype and stop the world wide web publishing service, but am sick of having to go through the whole ordial every time I start xampp.
so yesterday I changed the ports for my apache server and ecerything worked fine.
started up today and boom...localhost couldn't find my pages.
So I checked for port problems in xampp...there were none! apache was up and running(as were mysql server and filezilla). no error messages, nothing.
I resetted the ports to 80 and 443. killed of skype and the iis and everything worked fine again. Now whenever I change the ports, it will not run.
I did everything according to here:
How to change XAMPP apache server port?
(I changed the ports in httpd.conf, httpd-ssl.conf and in service and port settings )
I just don't get it. why it won't run with changed ports(and yes I checked the ports for being empty).
atm I have changed the port 80 -> 8024
and port 443 -> 1337 (no matter what I change this port to it always throws bad request)
8024 works fine. I can get to the dashboard via localhost:8024
but localhost:1337 gives me a bad request.
any suggestions, or similar encounters?
For now will have to continue using standart ports and kill of the 2 processes, but I really wanna skip that in the future.
I used port 80->8024
and port 443->448 yesterday and it worked fine...really weird...
Ok so that means your system has Microsoft IIS installed or one of the other bits of MS technology that reports that signature, they are doing that on later versions of Windows for some reason.
If you are not intending to use it you can uninstall it, it is not an integral part of windows so its being uninstalled wont effect normal operations of windows, and if you need to install it again later, it comes as part of the standard OS so you wont need to do anything perticularly clever.
So go to Start -> Control Panel -> Programs and Features
Click the 'Turn windows features on and off' link in the left hand menu.
Wait for the list to load and then find 'Internet Information Services'
Un check the check boxes for the following items ( you may not see all of them ), and there may be others I done know about. You may have all of these or just some of these.
IIS
Web Deploy 2.0 (Web Deployment Agent Service)
MS Sql Server Reporting service.
BranchCache ( Windows 8.1 )
SQL Server VSS Writer
List of possible service names not sure how up to date this is.
Tutorial on how to find what ports are in use on your system and what app is using them
Windows will then have a think for a while and then remove those applications, you will probably be asked to reboot to complete the uninstalls.
Reboot anyway when the uninstalls are complete.
Then try XAMPP again
We use Vagrant to spin-up dev environemnt VMs. Within our VM infrastructure we have /etc/hosts setup to emulate our production urls. For example, if an app lives in production at https://foo.bar.com, then in our VM environment it is https://test-foo.bar.com. This has been working well but I recently hit a hiccup.
We use Symfony2, and have a field with a Url constrant and checkDNS set to true. That fires of a validator that runs the following.
if (!checkdnsrr($host, 'ANY')) {
Since this is actually reaching out to the DNS server for answers, and it of course knows nothing of my /etc/hosts file, and https://test-foo.bar doesn't really exist, this fails.
Is there an easy way to configure the VM so that this works, short of setting up a DNS server and pointing all the VMs to use it?
The VMs are running Ubuntu GNU/Linux.
I have been developing a php project and the wamp server was seems
working fine but suddenly it stops working and i don't know what to do
because when i check its status it says server online and green icon is also
showing but it just does not work whenever i run .php files, Mr. browser
just write it down as i did in notepad++ but before some days it was working
fine, please help me I'm kinda stuck?
I also want to mention that in the mean while I installed tomcat server for some other work is it anything to do with fault because i'm pretty sure both operating on differnet port numbers
use <?php instead of <?or left click wamp > php > settings > short_open_tags
and make sure you are running your scripts through localhost and not just opening the php file in the browser
Read More about wamp problem
If you're definitely viewing the script through your MAMP setup (if your URL bar starts with http:// instead of file://) and it is showing the contents of the PHP file instead of executing the script, it sounds like Apache is running fine, but PHP-FPM is the issue or a misconfiguration between the two. Apache should detect it is a PHP script and ship it to the PHP-FPM process, accept a response then ship it to your browser.
I would recommend checking PHP-FPM logs first. All logs are in MAMP/logs - scroll to the bottom of each one for latest entries. Ensure the service is running as expected and logging hits when Apache serves a .php file. PHP-FPM may be using a socket file (which can hit permission problems) or on a network port (which can be in use/require admin privileges/etc). Otherwise check your config files, or re-install MAMP for fresh config files.
If Apache cannot start, common reasons are;
The port is in use by another application
The port is a low number and you do not have administrator privileges to use that port
Switching from wired to wireless / switching network adapters / changing hostname, etc
Apache is already running, or Apache thinks it is
You must sign out from Skype it'll occupied the port of Apache or you should turn down the server and then restart you pc and turn it on. It will work fine.
Is there any way that I can set up Apache to run locally, specifically NOT connecting to the internet, so that it may serve dynamic content (PHP) over a LAN?
I'm trying to set up a development environment on my Windows XP SP3 box and gain some experience with building web PHP driven web applications. I have residential Rogers service, and it's a violation of the TOS to have a server running over that connection.
Umm yes. Just download apache and fire it up. The only way it's going to get to the outside is if you specifically open up ports in your firewall/router to let http traffic in and route it to your machine. And if you're serious about getting some experience, ditch XP and get a quality linux distro on your "development" box. You can always remote desktop or ssh to it from a windows machine if you feel more comfortable that way.
My experience has been that many hosting companies use CentOs for their client servers, so I'd recommend trying that first if the purpose is gaining useful experience.
Oh by the way, Linux happens to be free.
You can use WAMP. It installs everything you'll need to get a testing server up and running in minutes
Using a packaged solution like WAMP or XAMPP will provide you with the basics for setting up an Apache web server + PHP + MySQL + the phpMyAdmin interface for working with MySQL outside of the command line.
I've first installed the WAMP server on my system.
It used http://localhost to show my files in the www directory.
But then I installed visual studio 2008. It too uses the http://localhost/
But it doesn't show up. What should I do?
I assume you mean IIS? Cassini (the build in "debugging" webserver) uses high ports when you fire an app up. Either way you need to configure either WAMP or IIS to listen on a port other than port 80, then you can access one on http://localhost/ and one on http://localhost:MYPORT/.
VS uses it's own development server, and usually VS starts his own server in debug mode, and there isn't a common server executable. Since VS needs to start it's own server in debug mode to test .NET driven applications, it can't show your WAMP applications because it usually runs in other port. Also, you can't run PHP applications under VS.
Try looking at server connection that the browser brings you at the application URL.