Resolved!
I uninstalled phpunit from pear and then reinstalled it again. I believe I was using the wrong/old/not enough sources before installing. Works like a charm!
So I'm trying to set up PEAR & PHPUnit. I was following http://www.newmediacampaigns.com/page/install-pear-phpunit-xdebug-on-macosx-snow-leopard but after I installed pear I had a different directory structure in /usr/local. Regardless, I was able run the phpunit install. But now I'm lost and asking for help before I make a bigger mess :)
pear config-show says:
PEAR directory php_dir /usr/local/share/pear
And my php.ini file (and confirmed in phpinfo() says:
include_path=".:/usr/local/share/pear"
So that's good, right? But now what? I get
Failed opening required 'PHPUnit/Framework.php' (include_path='.:/usr/local/share/pear')
If I try to include it in the php. And I have no idea where the binary might be to run it from the command line.
Inside /usr/local/share/pear/PHPUnit there are two directories "Extensions" and "Framework"
It sometimes happen that the install fails on PHPUnit specifically, but succeeds on the dependencies, so it only looks like the install was succesfull.
Try this when installing
pear install --force --alldeps phpunit/PHPUnit
The --force option will force the install of PHPUnit, even if all the dependencies can't be met. In my case there was a missing dependency for the dom PHP extension which blocked the installation even though the PHP_Invoker package could be used instead.
The --alldeps option makes sure that all of the dependencies got installed.
Check for a bin directory in the pear install, something along the lines of /usr/local/share/pear/bin/ - your install is different than mine..
You could also try searching for the binary -
find /usr/local/share/pear -name 'phpunit'
Related
I don't know if this question has been asked, because searching finds results mostly about moving the libraries installation directory.
I have a globally installed composer command. Is there a way to run, for example, composer install in a different directory than current, i.e. to specify the directory in which I would like tu run the command?
E.g. being in /home/someuser, I would like to acquire the same result as in running composer install it inside /home/someuser/myproject. Of course, one way would be to simply change the current directory, run composer and go back.
Try composer install -h. There you'll find an option --working-dir (or -d). And that's what you're looking for.
Then run:
composer install --working-dir=/home/someuser/myproject
You can find more in composer docs.
Depending on your operating system, the = might need to be removed:
composer install --working-dir /home/someuser/myproject
In addition to the above answer from Tomáš Votruba i had to append the = charachter on OSX. So the full command would be:
composer install -d=/home/someuser/myproject
My first post on SO so was unable to simply add this as a comment.
This works for me, PHP 7.3 on ubuntu 18.04
Install
composer install --working-dir=/your_composer_dir
Update
composer update --working-dir=/your_composer_dir
I tried what others said, but it was giving me: Invalid working directory specified 'PATH' does not exist. Although it was my working dir that contained composer.json!
I don't know why anyway, but this worked for me (only for gnu/linux users):
composer --working-dir=$(pwd)
And by the way, if you had run composer -h, it would've told you the solution:
-d, --working-dir=WORKING-DIR If specified, use the given directory as working directory.
I am using a Windows machine with PHPStorm (terminal) and this worked for me.
composer install --working-dir /home/someuser/myproject
My Linux OS machines require me to use
composer install --working-dir=/home/someuser/myproject
Note: You may be able to substitute ~/ for /home/someuser/ if your path is super long.
Run:
cd /home/mysites/google.com
Then run:
composer require facebook/graph-sdk
Above steps will open up the directory named (google.com) and install facebook Graph SDK there.
I'm searching for the solution for a day but i have no luck.
I already install Zend Framework on Mac OS 10.9, i also install PHPUnit via pear. But when i tried to create a project it show up a message
Testing Note: PHPUnit was not found in your include_path, therefore no testing actions will be created.
This is my pear localtion: /usr/bin/pear
This is my phpunit location: /usr/bin/phpunit
Thank you so much!
How did you install PHPUnit?
It is "just" not included in your include_path - that is it.
You need to add it's base path to the Zend Autoloader - here's how.
composer is also an option as #Eddie Jaoude mentioned.
The main difference between using composer and pear is that pear installs its packages globally and you need to include them in your path (to load them). composer on the other hand installs them locally in the project in your vendors directory and automatically handles auto loading for you.
I've just installed PEAR into WAMP attempting to follow this article. It all seems to have gone okay but when I type "pear upgrade" into the command prompt I get this error:
ERROR: failed to mkdir c:\php\pear\docs\Archive_Tar\docs
It is looking on the wrong drive (and missing a subdirectory in that path by the looks of it). It should be looking for D:\php\php5.3.13\pear\docs\Archive_Tar\docs
When specifying installation directories I chose ones on the D:\ and thats where the folder structure is, the include_path in both php.ini locations have also been updated. I've also reset the WAMP server after making the changes.
How do I set it to look / install the package in the right place?
My advice is to remove your complete PEAR installation and install from scratch. It'll save you time and sweat. If you have the time and patience, you can fix PEAR parameters with the config-* subcommands:
C:\>pear
Commands:
[...]
config-create Create a Default configuration file
config-get Show One Setting
config-help Show Information About Setting
config-set Change Setting
config-show Show All Settings
Start with pear config-show to inspect current values and see if you can spot invalid ones.
Can you walk me through the installation of a library for php, specifically what each terminal command does?
I have been learning web development for 6 months and it is time I need the console / terminal. I can't find any beginner walkthrough of using the terminal to add libraries and plugins to PHP. There are a lot of tutorials for specific steps or errors, but none start to finish.
If you want specifics to make your example concrete, here is what I am trying to install:
The library I am installing: http://code.google.com/p/phpquery/.
My directory for PHP on MAMP: /Applications/MAMP/bin/php/php5.3.6/bin
Thanks!
Don
edit:
I figured out my specific issue, but I don't think I really understand what I did, so I can't repeat it by myself in any other situation. This thread can help a lot of new terminal users including myself. The type of response I am looking for would go like this:
Step 1: Open your terminal. (This is an alternative way to navigate and execute commands on files on your computer).
Step 2: Find out where MAMP is installed however you like. Then go to your terminal, and type in cd followed by the path. cd stands for current directory and tells your terminal where it should execute its commands. The command you use will be very similar to this cd /Applications/MAMP. This will make your current directory MAMP.
Step 3: You are adding a library to PHP. So you need to go to the PHP folder in MAMP.... (please help us from this part!)
I just checked and it is available in pear channels.
# this is from their site
pear channel-discover phpquery-pear.appspot.com
pear install phpquery/phpQuery
Of course, for Mac using MAMP, you would use commands like this:
/Applications/MAMP/bin/php5/bin/pear install [package]
So for PHPQuery, try this:
/Applications/MAMP/bin/php5/bin/pear channel-discover phpquery-pear.appspot.com
/Applications/MAMP/bin/php5/bin/pear install phpquery/phpQuery
Same method should apply to pecl extensions as well.
EDIT
I personally just installed it on mine to test, here were my results:
$ /Applications/MAMP/bin/php5/bin/pear channel-discover phpquery-pear.appspot.com
Adding Channel "phpquery-pear.appspot.com" succeeded
Discovery of channel "phpquery-pear.appspot.com" succeeded
$ /Applications/MAMP/bin/php5/bin/pear install phpquery/phpQuery
downloading phpQuery-0.9.5.386-pear.tgz ...
Starting to download phpQuery-0.9.5.386-pear.tgz (100,990 bytes)
......................done: 100,990 bytes
install ok: channel://phpquery-pear.appspot.com/phpQuery-0.9.5.386
This should work with any PEAR or PECL extension. Check out this page for a list of PEAR packages.
EDIT 2
Make sure /Applications/MAMP/bin/php5/lib/php is in your include path! That is where phpQuery.php will be located once you've downloaded the PEAR packages properly with MAMP.
EDIT 3
Per cshu's comment, he mentioned that these packages are no longer maintained and that you should use this instead:
$ /Applications/MAMP/bin/php5/bin/pear channel-discover pear.querypath.org
$ /Applications/MAMP/bin/php5/bin/pear install querypath/QueryPath
I'm working on a project that'll use PEAR packages. Because you never know what version of the PEAR package will be installed on your hosting provider (and especially because I require a patch to have been applied to one of the packages), I'd like to put the PEAR source for my project right into SVN, so other developers can immediately have the dependencies.
But everything related to PEAR seems to have absolute directories! Running "pear config-create . pear.conf" to set up a new PEAR directory even fails with the error message:
Root directory must be an absolute path
I checked out the pear config files on some other servers and they, too, seem to have absolute paths.
Whenever a developer checks this out to his own machine, or we export it all to a server, we don't know what the absolute path will be.
Is there any way to set this up?
I couldn't get my Hosting provider to install the PEAR libraries I wanted. Here's how I made PEAR part of my source tree.
1. Create a remote.conf file
Creating your remote.conf is a little different than in the manual. Lets say I want to install PEAR in vendor/PEAR of a project. You would do it like this:
#from the root of the project
$ cd vendor ; mkdir PEAR ; cd PEAR
$ pear config-create <absolute path to project>/vendor/PEAR/ remote.conf
2.Update the channels
$ pear -c remote.conf channel-update pear.php.net
3. install PEAR
$ pear -c remote.conf install --alldeps pear
4. install any other libraries
$ pear -c remote.conf install --alldeps <libname>
Voila... PEAR is part of the source tree.
The Catches:
Even though the paths in remote.conf are absolute the libraries themselves will still work. It's just updating that won't work from anywhere. You will need to update it from the same path that it was created from -- in the above case, from vendor/PEAR.
Some libraries don't like being outside the path, so you may have to add vendor/PEAR to the path (I've got code, just ask if you need.)
If you have PHP 5.3.1 use Pyrus, the PEAR2 installer. The pyrus managed installations can be moved where ever you like.
Download pyrus -
$> wget http://pear2.php.net/pyrus.phar
Create a directory to store your pyrus-installed packages:
$> mkdir mylibs
Install packages -
$> php pyrus.phar mylibs install pear/Net_URL
Your installed package is now at mylibs/php/Net/URL.php
Note that we passed the mylibs directory to indicate what directory to install to, as well as the channel name 'pear' (the default in pyrus is pear2.php.net). For convenience, the pyrus.phar file can be executed from cli if you chmod +x it.
You can move the mylibs directory wherever you'd like. Even commit it to your repository.
Lots of docs on the PEAR website.
I'm note entirely sure if this answers your question, but you can specify the location for the PEAR repository on the commandline, so you can create a local repository, using:
pear install --force --installroot=/path/to/my/pear/ PEAR
Then you can install additional packages using:
pear install --installroot=/path/to/my/pear/ SomePackage
To use the local repo from within your app, you have to make sure that the include_path points to the local repo, rather than the default (globally installed) repository. So you'd want it to look like this:
include_path = ".:/path/to/my/pear/usr/share/php"
Re :
Actually, he wants to avoid the absolute paths so that the solution can be checked out from many machines without depending on the path each one has the repository installed.
-- Carlos Lima
Seems you're right. In that case, I would advice that you don't check the PEAR repository into your SVN repository, but rather use a deploy script to install/update the repository at the server. Just make sure to install a particular version. (You do have an automated deploy, right?)