I want to use PHP with a server that i've coded my self. (Not Apache etc) I guess I have to send the http request and some additional data from my server to php, but I dont know how to make that connection and how to format that message.
I know I can run scripts with php.exe, the problem is that way it won't work with php sessions.
If you Google for the CGI specification, this will give you a reasonable idea of what environment variables to set up. Usually you exec the php process with the script filename as an argument, supplying it with the new environment variables. Are you familiar with fork, exec* system calls?
It's a little more complicated than that, since it involves fiddling with standard input, output and error streams. To give you an idea, check out the thttpd source code, in the file libhttpd.c, function cgi_child.
If your server source code is not in C or C++, you will have to dig around for spawning a child process to handle the PHP script being called in your server, and send the output to the browser. Some of that output will be HTTP headers, and it may stop executing after that (e.g. HTTP 2xx no content, HTTP 3xx redirect) in which case you send that back to the browser with \r\n\r\n to terminate the output.
To send the information to the PHP process, just set up the environment and possibly argument variables unless the process reads the environment variable SCRIPT_FILENAME you set up (see CGI environment variables). Change into the directory where the binary is or into the document root, whichever makes sense, and before spawning, handle incoming data (e.g. from POST request) and let the spawned process read it from stdin (from php-fpm, it probably reads from the socket you set up, but not entirely sure, so that's left as an exerciese).
It might be easier to run or spawn php-cgi which is php-fpm, which listens on a default or specified address and port. Run php-fpm -h for options and give it a whirl. This is definitely the way to go for session support I think. Also make sure the process knows where to look for the php.ini file.
As well as the CGI spec, it would be helpful to read all about HTTP. Or at least a good chunk of it.
I'm using the PHP built-in server to serve static files.
php -S localhost:8000
I have however noticed that the Range header gets ignored - instead of serving the requested range, the entire resource is served.
I am not that well versed in PHP, the reason I'm using this server is because I'm looking for an alternative to Python's built-in server (python3 -m http.server) which does not support range requests (either?) that is built-in into macOS. It seems to me like Python and PHP servers are the two available options. Knowing Python's doesn't support HTTP range requests, is there any way to use config.ini or some other mechanism to enable HTTP range requests in PHP's?
I looked at php -h but it doesn't talk about the -S option much beyond the basic syntax. Not sure if there are more options that can be used with it so that's why I assume config.ini is the only possible way.
If you start the webserver with a router:
$ php -S 0.0.0.0:9999 router.php
All http requests will be passed through that script. And in there you can handle the range request by reading and outputing chunks of files.
Using the script linked to here in this comment:
https://stackoverflow.com/a/22398156/3392762
You can try something like the following in router.php:
<?php
if($_SERVER['REQUEST_URI'] === '/foo.ogg')
serveFilePartial('foo.ogg');
Be very careful mapping user submitted paths to files.
I can't attest to the quality of the linked code. But if you scan it, it looks for the $_SERVER['HTTP_RANGE'] header. And tries to grab the byte range requested and serve a chunk appropriately.
Although I don't have a definitive answer I'm pretty sure the documentation essentially says no.
This web server was designed to aid application development. It may also be useful for testing purposes or for application demonstrations that are run in controlled environments. It is not intended to be a full-featured web server.
CGI is a Common Gateway Interface. As the name says, it is a "common" gateway interface for everything. It is so trivial and naive from the name. I feel that I understood this and I felt this every time I encountered this word. But frankly, I didn't. I'm still confused.
I am a PHP programmer with web development experience.
user (client) request for page ---> webserver(->embedded PHP
interpreter) ----> Server side(PHP) Script ---> MySQL Server.
Now say my PHP Script can fetch results from MySQL server & MATLAB server & some other server.
So, now PHP Script is the CGI? Because its interface for the between webserver & All other servers? I don't know. Sometimes they call CGI, a technology & other times they call CGI a program or some other server.
What exactly is CGI?
Whats the big deal with /cgi-bin/*.cgi? What's up with this? I don't know what is this cgi-bin directory on the server for. I don't know why they have *.cgi extensions.
Why does Perl always comes in the way. CGI & Perl (language). I also don't know what's up with these two. Almost all the time I keep hearing these two in combination "CGI & Perl". This book is another great example CGI Programming with Perl. Why not "CGI Programming with PHP/JSP/ASP"? I never saw such things.
CGI Programming in C, confuses me a lot. "in C"?? Seriously?? I don't know what to say. I'm just confused. "in C"?? This changes everything. Program needs to be compiled and executed. This entirely changes my view of web programming. When do I compile? How does the program gets executed (because it will be a machine code, so it must execute as a independent process). How does it communicate with the web server? IPC? and interfacing with all the servers (in my example MATLAB & MySQL) using socket programming? I'm lost!!
People say that CGI is deprecated and isn't in use anymore. Is that so? What is the latest update?
Once, I ran into a situation where I
had to give HTTP PUT request access to
web server (Apache HTTPD). Its a long
back. So, as far as I remember this is
what I did:
Edited the configuration file of Apache HTTPD to tell webserver to pass
all HTTP PUT requests to some
put.php ( I had to write this PHP
script)
Implement put.php to handle the request (save the file to the location
mentioned)
People said that I wrote a CGI Script.
Seriously, I didn't have a clue what
they were talking about.
Did I really write CGI Script?
I hope you understood what my confusion is. (Because I myself don't know where I'm confused). I request you guys to keep your answer as simple as possible. I really can't understand any fancy technical terminology. At least not in this case.
EDIT:
I found this amazing tutorial "CGI Programming Is Simple!" - CGI Tutorial, which explains the concepts in simplest possible way. After reading this article you may want to read Getting Started with CGI Programming in C to supplement your understanding with actual code samples. I've also added these links to this tutorial to Wikipedia's article: http://en.wikipedia.org/wiki/Common_Gateway_Interface
CGI is an interface which tells the webserver how to pass data to and from an application. More specifically, it describes how request information is passed in environment variables (such as request type, remote IP address), how the request body is passed in via standard input, and how the response is passed out via standard output. You can refer to the CGI specification for details.
To use your image:
user (client) request for page ---> webserver ---[CGI]----> Server side Program ---> MySQL Server.
Most if not all, webservers can be configured to execute a program as a 'CGI'. This means that the webserver, upon receiving a request, will forward the data to a specific program, setting some environment variables and marshalling the parameters via standard input and standard output so the program can know where and what to look for.
The main benefit is that you can run ANY executable code from the web, given that both the webserver and the program know how CGI works. That's why you could write web programs in C or Bash with a regular CGI-enabled webserver. That, and that most programming environments can easily use standard input, standard output and environment variables.
In your case you most likely used another, specific for PHP, means of communication between your scripts and the webserver, this, as you well mention in your question, is an embedded interpreter called mod_php.
So, answering your questions:
What exactly is CGI?
See above.
Whats the big deal with /cgi-bin/*.cgi? Whats up with this? I don't know what is this cgi-bin directory on the server for. I don't know why they have *.cgi extensions.
That's the traditional place for cgi programs, many webservers come with this directory pre configured to execute all binaries there as CGI programs. The .cgi extension denotes an executable that is expected to work through the CGI.
Why does Perl always comes in the way. CGI & Perl (language). I also don't know whats up with these two. Almost all the time I keep hearing these two in combination "CGI & Perl". This book is another great example CGI Programming with Perl Why not "CGI Programming with PHP/JSP/ASP". I never saw such things.
Because Perl is ancient (older than PHP, JSP and ASP which all came to being when CGI was already old, Perl existed when CGI was new) and became fairly famous for being a very good language to serve dynamic webpages via the CGI. Nowadays there are other alternatives to run Perl in a webserver, mainly mod_perl.
CGI Programming in C this confuses me a lot. in C?? Seriously?? I don't know what to say. I"m just confused. "in C"?? This changes everything. Program needs to be compiled and executed. This entirely changes my view of web programming. When do I compile? How does the program gets executed (because it will be a machine code, so it must execute as a independent process). How does it communicate with the web server? IPC? and interfacing with all the servers (in my example MATLAB & MySQL) using socket programming? I'm lost!!
You compile the executable once, the webserver executes the program and passes the data in the request to the program and outputs the received response. CGI specifies that one program instance will be launched per each request. This is why CGI is inefficient and kind of obsolete nowadays.
They say that CGI is deprecated. Its no more in use. Is it so? What is its latest update?
CGI is still used when performance is not paramount and a simple means of executing code is required. It is inefficient for the previously stated reasons and there are more modern means of executing any program in a web enviroment. Currently the most famous is FastCGI.
What exactly is CGI?
A means for a web server to get its data from a program (instead of, for instance, a file).
Whats the big deal with /cgi-bin/*.cgi?
No big deal. It is just a convention.
I don't know what is this cgi-bin directory on the server for.
I don't know why they have *.cgi extensions.
The server has to know what to do with the file (i.e. treat it as a program to execute instead of something to simply serve up). Having a .html extension tells it to use a text/html content type. Having a .cgi extension tells it to run it as a program.
Keeping executables in a separate directory gives some added protection against executing incorrect files and/or serving up CGI programs as raw data in case the server gets misconfigured.
Why does Perl always comes in the way.
It doesn't. Perl was just big and popular at the same time as CGI.
I haven't used Perl CGI for years. I was using mod_perl for a long time, and tend towards PSGI/Plack with FastCGI these days.
This book is another great example CGI Programming with Perl
Why not "CGI Programming with PHP/JSP/ASP".
CGI isn't very efficient. Better methods for talking to programs from webservers came along at around the same time as PHP. JSP and ASP are different methods for talking to programs.
CGI Programming in C this confuses me a lot. in C?? Seriously??
It is a programming language, why not?
When do I compile?
Write code
Compile
Access URL
Webserver runs program
How does the program gets executed (because it will be a machine code, so it must execute as a independent process).
It doesn't have to execute as an independent process (you can write Apache modules in C), but the whole concept of CGI is that it launches an external process.
How does it communicate with the web server? IPC?
STDIN/STDOUT and environment variables — as defined in the CGI specification.
and interfacing with all the servers (in my example MATLAB & MySQL) using socket
programming?
Using whatever methods you like and are supported.
They say that CGI is depreciated. Its no more in use. Is it so?
CGI is inefficient, slow and simple. It is rarely used, when it is used, it is because it is simple. If performance isn't a big deal, then simplicity is worth a lot.
What is its latest update?
1.1
CGI is an interface specification between a web server (HTTP server) and an executable program of some type that is to handle a particular request.
It describes how certain properties of that request should be communicated to the environment of that program and how the program should communicate the response back to the server and how the server should 'complete' the response to form a valid reply to the original HTTP request.
For a while CGI was an IETF Internet Draft and as such had an expiry date. It expired with no update so there was no CGI 'standard'. It is now an informational RFC, but as such documents common practice and isn't a standard itself. rfc3875.txt, rfc3875.html
Programs implementing a CGI interface can be written in any language runnable on the target machine. They must be able to access environment variables and usually standard input and they generate their output on standard output.
Compiled languages such as C were commonly used as were scripting languages such as perl, often using libraries to make accessing the CGI environment easier.
One of the big disadvantages of CGI is that a new program is spawned for each request so maintaining state between requests could be a major performance issue. The state might be handled in cookies or encoded in a URL, but if it gets to large it must be stored elsewhere and keyed from encoded url information or a cookie. Each CGI invocation would then have to reload the stored state from a store somewhere.
For this reason, and for a greatly simple interface to requests and sessions, better integrated environments between web servers and applications are much more popular. Environments like a modern php implementation with apache integrate the target language much better with web server and provide access to request and sessions objects that are needed to efficiently serve http requests. They offer a much easier and richer way to write 'programs' to handle HTTP requests.
Whether you wrote a CGI script rather depends on interpretation. It certainly did the job of one but it is much more usual to run php as a module where the interface between the script and the server isn't strictly a CGI interface.
The CGI is specified in RFC 3875, though that is a later "official" codification of the original NCSA document. Basically, CGI defines a protocol to pass data about a HTTP request from a webserver to a program to process - any program, in any language. At the time the spec was written (1993), most web servers contained only static pages, "web apps" were a rare and new thing, so it seemed natural to keep them apart from the "normal" static content, such as in a cgi-bin directory apart from the static content, and having them end in .cgi.
At this time, here also were no dedicated "web programming languages" like PHP, and C was the dominating portable programming language - so many people wrote their CGI scripts in C. But Perl quickly turned out to be a better fit for this kind of thing, and CGI became almost synonymous with Perl for a while. Then there came Java Servlets, PHP and a bunch of others and took over large parts of Perl's market share.
Have a look at CGI in Wikipedia. CGI is a protocol between the web server and a external program or a script that handles the input and generates output that is sent to the browser.
CGI is a simply a way for web server and a program to communicate, nothing more, nothing less. Here the server manages the network connection and HTTP protocol and the program handles input and generates output that is sent to the browser. CGI script can be basically any program that can be executed by the webserver and follows the CGI protocol. Thus a CGI program can be implemented, for example, in C. However that is extremely rare, since C is not very well suited for the task.
/cgi-bin/*.cgi is a simply a path where people commonly put their CGI script. Web server are commonly configured by default to fetch CGI scripts from that path.
a CGI script can be implemented also in PHP, but all PHP programs are not CGI scripts. If webserver has embedded PHP interpreter (e.g. mod_php in Apache), then the CGI phase is skipped by more efficient direct protocol between the web server and the interpreter.
Whether you have implemented a CGI script or not depends on how your script is being executed by the web server.
CGI essentially passes the request off to any interpreter that is configured with the web server - This could be Perl, Python, PHP, Ruby, C pretty much anything. Perl was the most common back in the day thats why you often see it in reference to CGI.
CGI is not dead. In fact most large hosting companies run PHP as CGI as opposed to mod_php because it offers user level config and some other things while it is slower than mod_php. Ruby and Python are also typically run as CGI. they key difference here is that a server module runs as part of the actual server software - where as with CGI its totally outside the server The server just uses the CGI module to determine how to pass and recieve data to the outside interpreter.
CGI is a mechanism whereby an external program is called by the web server in order to handle a request, with environment variables and standard input being used to feed the request data to the program. The exact language the external program is written in does not matter, although it is easier to write CGI programs in some languages versus others.
Since CGI scripts need execute permissions, httpd by default only allows CGI programs in the cgi-bin directory to be run for (possibly now misguided) security purposes.
Most PHP scripts run in the web server process via mod_php. This is not CGI.
CGI is slow since the program (and related interpreter) must be started up per request. Modern alternatives are embedded execution, used by mod_php, and long-running processes, used by FastCGI. A given language may have its own way of implementing those mechanisms, so be sure to ask around before resorting to CGI.
A real-life example: a complicated database that needs to be shown on a website. Since the database was designed somewhere around 1986 (!), lots of data was packed in different ways to save on disk space.
As the development went on, the developers could no longer solve complicated data requests in SQL alone, for example because the sorting algorythms were unusual.
There are three sensible solutions:
quick and dirty: send the unsored data to PHP, sort it there. Obviously a very expensive solution, because this would be repeated every time the page is called
write a plugin to the database engine -- but the admin wasn't ready to allow foreign code to run on their server, or
you can process the data in a program (C, Perl, etc.), and output HTML. The program itself goes into /cgi-bin, and is called by the web server (e.g. Apache) directly, not through PHP.
CGI runs your script in Solution #3 and outputs the effect to the browser. You have the speed of the compiled program, the flexibility of a language broader than SQL, and no need to write plugins to the SQL server. (Again, this is an example specific to SQL and C)
A CGI script is a console/shell program. In Windows, when you use a "Command Prompt" window, you execute console programs. When a web server executes a CGI script it provides input to the console/shell program using environment variables or "standard input". Standard input is like typing data into a console/shell program; in the case of a CGI script, the web server does the typing. The CGI script writes data out to "standard output" and that output is sent to the client (the web browser) as a HTML page. Standard output is like the output you see in a console/shell program except the web server reads it and sends it out.
A CGI script can be executed from a browser. The URI typically includes a query string that is provided to the CGI script. If the method is "get" then the query string is provided to the CGI Script in an environment variable called QUERY_STRING. If the method is "post" then the query string is provided to the CGI Script using standard input (the CGI Script reads the query string from standard input).
An early use of CGI scripts was to process forms. In the beginning of HTML, HTML forms typically had an "action" attribute and a button designated as the "submit" button. When the submit button is pushed the URI specified in the "action" attribute would be sent to the server with the data from the form sent as a query string. If the "action" specifies a CGI script then the CGI script would be executed and it then produces a HTML page.
RFC 3875 "The Common Gateway Interface (CGI)" partially defines CGI using C, as in saying that environment variables "are accessed by the C library routine getenv() or variable environ".
If you are developing a CGI script using C/C++ and use Microsoft Visual Studio to do that then you would develop a console program.
You maybe want to know what is not CGI, and the answer is a MODULE for your web server (if I suppose you are runnig Apache). AND THAT'S THE BIG DIFERENCE, because CGI needs and external program, thread, whatever to instantiate a PERL, PHP, C app server where when you run as a MODULE that program is the web server (apache) per-se.
Because of all this there is a lot of performance, security, portability issues that come into play. But it's good to know what is not CGI first, to understand what it is.
A CGI is a program (or a Web API) you write, and save it on the Web Server site. CGI is a file.
This file sits and waits on the Web Server. When the client browser sends a request to the Web Server to execute your CGI file, the Web Server runs your CGI file on the server site. The inputs for this CGI program, if any, are from the client browser. The outputs of this CGI program are sent to the browser.
What language you use to write a CGI program? Other posts already mention c,java, php, perl, etc.
The idea behind CGI is that a program/script (whether Perl or even C) receives input via STDIN (the request data) and outputs data via STDOUT (echo, printf statements).
The reason most PHP scripts don't qualify is that they are run under the PHP Apache module.
so since my webpage makes very complex calculations its VERY important to have it generated with a compiled code, but since im doing it for the web I need a few commands like the one it comes in PHP like $_SERVER (to get for example the IP of the user), $_GET, $_POST .
if theres already is one web server like this that pass these things for parameter for example it would be easier.
Thanks in advance.
You have two basic options:
Use CGI, which is a well supported system for communicating between web servers and scripts/executables.
Write a module
CGI is simple and near universal, but requires a new process to be spawned for each request. There is also FastCGI which is a bit more complicated but lets processes be reused.
Writing a module is significantly more complicated, but provides better performance.
Perhaps look at http://www.boutell.com/cgic/?
You can either compile you program as a CGI, or bounce your requests through a PHP script and pass whichever values you need in as command line parameters:
<?php
passthru("/path/to/my/binary {$_SERVER['HTTP_HOST']} {$_GET['aparameter']} {$_POST['aparameter']}");
?>
If you want to go down the CGI route, start here... ;-)
I'm experimenting with some video content delivery using VLC and Apache Reverse Proxy. Since VLC can support http streaming, I'm sure that it will work with a Apache Reverse Proxy (I haven't tried this yet, but I don't see why it wouldn't work).
Before letting Apache proxy the http video stream, I would like to run a script first. Is there an option in Apache to do this?
If not, can someone think of a way for PHP to do some magic first, and then somehow redirect to the http video stream, without making a VLC or Windows Media Player client cry? By doing it this way, the Apache Reverse Proxy would just have to point to the PHP script only.
Either way, the idea of the script it to start the VLC streaming server.
Thanks
if you really want to do it in apache you can always write your own module :)
alternatively you can use mod_rewrite with the prg option (rewrite map).
where you basically have a rewrite rule processed by an external program.
you can do whatever you want there (logging, etc).
don't forget to set a rewritelock file, or you will experience strange behaviour.
you could also do "everything" in php and then use the apache module mod_xsendfile where you just pass a header in php containing the locatin of the file in the filesystem.
it will not be disclosed to the client but catched by the apache module and served by apache. your php process will terminate regularely.
theese are the best out of the box options i can think of.
if nothing of this works because you need to catch some stuff during or at the end of the transfer you could just echo the files content with php. with correct output buffering you can achieve accetable performance on that.
or you could do some logfile postprocessing if this solves your problem.