I'm on Windows and I'm trying to debug a Web application (hosted with Vagrant/Homestead) using PhpStorm through XDebug. I tried many configurations but I can't get things working. The PhpStorm XDebug setup is pretty common.
This is the current xdebug configuration:
vagrant#homestead: /etc/php/7.0/cli/conf.d/20-xdebug.ini
zend_extension=xdebug.so
xdebug.remote_enable = on
xdebug.remote_connect_back = on
xdebug.idekey='PHPSTORM'
In the IDE "Start listening for PHP debug connections" it's turned on. When I attempt to start debugging a new chrome tab opens and the URL ends, for example, with ?XDEBUG_SESSION_START=16588 but the debugger doesn't run and this is what the IDE says:
Also, netstat says the port 9000 is still listening.
Any idea?
You are changing the 20-xdebug.ini file for the Command Line Interface (CLI). Instead you need to change the /etc/php/7.0/apache2/conf.d/20-xdebug.ini for the Apache settings, since you are using Chrome.
UPDATE
I'm not sure of the differences between Apache and Nginx (which may be /etc/php/7.0/fpm/conf.d/20-xdebug.ini), but here is how I got it working with a VirtualBox VM running Apache, on a Windows computer.
Settings for 20-xdebug.ini:
zend_extension=xdebug.so
xdebug.remote_enable=1
xdebug.remote_host=192.168.1... (your windows IP address within your network)
xdebug.remote_port=9000
xdebug.autostart=1
I configured Xdebug in php.ini and I see it in phpinfo().
And I see the Xdebug version in Interpreter I have XAMPP v3.2.2 in Windows 10.
I attach some pictures to explain what I have.
Please help me how can I make PhpStorm stop at breakpoints?
My php.ini
[XDebug]
zend_extension="C:\xampp\php\ext\php_xdebug.dll"
xdebug.remote_enable=1
xdebug.remote_host="127.0.0.1"
xdebug.remote_port=9000
xdebug.remote_handler="dbgp"
xdebug.remote_autostart=1
xdebug.profiler_enable=1
;xdebug.remote_connect_back=1
Interpreters
Languages & Frameworks>PHP>Debug
Try to change xdebug.remote_host="localhost:8081" to xdebug.remote_host=localhost. You already specified the port in xdebug.remote_port, so the host setting must contain only host name.
Also check that port 9000 is really held by PHPStorm. There can be a conflict with PHP FPM, because it uses the same port by default.
I have a PHP application that runs on a Debian server where I've installed apache 2.2.4 and xdebug.
zend_extension=/usr/lib/php5/20090626+lfs/xdebug.so
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=192.168.0.2
xdebug.remote_port=9000
All the PHP files are saved on this server. The Server IP is : 192.168.0.2
The problem is that I'm opening the PHP project via FTP with Netbeans on a Windows 7 environment where apache is NOT installed!
Is it possible to debug in this scenario and does someone have any links for direction how to configure this scenario?
Please any help would be appreciated.
Thanks in Advance
Now i found a solution.
These links helped me:
http://wiki.netbeans.org/HowToConfigureXDebug
http://www.google.de/?gws_rd=ssl#q=php+netbeans+xdebug+configuration
The xdebug.ini i modified like this:
zend_extension=/usr/lib/php5/20090626+lfs/xdebug.so
xdebug.idekey=netbeans-xdebug
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=192.168.0.103
xdebug.remote_port=9001
The IP adress 103 is the adress of my local machine and i had to add the idekey to the ini.
I'm trying to use XDebug in the following scenario
Physical Host on Windows 7, with Netbeans 7.1.1
Virtual guest on Ubuntu, with Apache server and PHP 5.3.10
the PHP code of my website is on a shared folder on Ubuntu, in /var/www/mysite
the PHP code is accessible from my Windows host, on \\guestIP\mysite, with R/W permissions
Website accessible from http://mysite.local.fr, from both host and guest
I created a Netbeans project from my Windows Host, pointing to \\guestIP\mysite.
In the project Run configuration, I have the following:
Run as: Local web server
Project URL: http://mysite.local.fr
Index file: index.php (does exist in the project)
In the Advanced Run Configuration:
I checked "Ask every time" (I also tried using "Do not ask" and starting the browser with the session key myself)
I tried setting '/var/www/mysite' - \\GuestIP\mysite for the mapping (and tried using nothing as well)
I haven't touched the proxy settings
I have the following in the php.ini on my Ubuntu VM
xdebug.remote_enable = on
xdebug.profiler_enable = off
xdebug.profiler_enable_trigger = off
xdebug.profiler_output_name = cachegrind.out.%t.%p
xdebug.profiler_output_dir = /tmp
;xdebug.remote_host=localhost,<HostIP>, mysite.local.fr
xdebug.remote_connect_back=1
xdebug.remote_handler=dbgp
xdebug.idekey="netbeans-xdebug"
xdebug.remote_mode=req
None of this works, Netbeans does not stop at any breakpoint from Windows.
Debugging directly from my VM with Netbeans works fine.
Can someone tell me how to get my debugger to work remotely from Windows?
Thanks
Sorry, i can't comment anymore. #David #JamesB41: I've been looking for this too. My setup is a Windows 7 host with NetBeans 7.1, and an Ubuntu VM in VirtualBox. I have the NetBeans project set up as a remote project, uploading and downloading using SFTP.
The following setup works for me, just use your host's IP as remote_host, and make sure the VM can see it.
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_host=10.217.165.193
xdebug.remote_port=9000
xdebug.remote_log="/tmp/log/xdebug.log"
NetBeans will stop at the entry point breakpoint (if you have the option set in PHP->Debugging). But, it won't stop on NetBeans-created breakpoints, because its running off the VM's files. You can use xdebug_break() though, and it will show stack and variables. It will stop at NetBeans breakpoints and highlight if you map the folders correctly in project config > Run Config > Advanced. Awesome. I am complete.
(The connect_back config didn't seem to help, possibly because $_SERVER['REMOTE_ADDR'] isn't populated.)
Go through the below document for remote debugging using NetBeans. Very helpful.
http://stuporglue.org/setting-up-xdebug-with-netbeans-on-windows-with-a-remote-apache-server/
In know this is old but a good reminder. Make sure if you are using nat in virtualbox that you set port forwarding on the xdebug port back to the local machine typically 9000 by default.
Another option is to have the VM configured to speak to its own localhost:9000 (default for xdebug) and then ssh in from host to VM and establish a port tunnel for that port back to the host machine. Then your host machine debugger simply connects to localhost:9000 and everything should work exactly as if they were running on the same machine.
See: Multiple users XDebug and PHP Debugging
Debugging remotely with Linux + Apache + PHP + xdebug + NetBeans (SFTP)
I've got the following setup and it works.
Host PC (client)
Linux Debian Jessie **
NetBeans version 8.0.2
NetBeans has a project created as "PHP Application from Remote
Server", that has to be debugged
NetBeans connects to Remote Server using SFTP
IP (for example): 192.168.0.2
** I am aware that the OP question mentions Windows, but regarding that the main setup to solve this should be made on the VM, I hope this helps somebody anyway.
Guest PC (server) / Virtual Machine
Linux Debian Jessie
Apache
PHP 5.6
xdebug 2.2.5
IP (for example): 192.168.0.1
The following steps should be made on the "Guest PC (server) / Virtual Machine"
install xdebug sudo apt-get install php5-xdebug
edit /etc/php5/apache2/php.ini,
add these lines right before the [Date] AND change xdebug.remote_host to reflect your "Host PC (client)" IP:
[debug]
; Remote settings
xdebug.remote_autostart=off
xdebug.remote_enable=on
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=192.168.0.2
xdebug.remote_port=9000
restart apache sudo service apache2 restart
Reference
How to configure XDebug - Remote Debuging http://wiki.netbeans.org/HowToConfigureXDebug#Remote_Debuging
you need to have correctly configured property xdebug_remote.host on
remote machine. The IP address of local machine has to be defined in
this property. For example, you want to debug your source code on
remote machine 192.168.0.1 using Netbeans installed on 192.168.0.2.
You need to change xdebug.remote_host on 192.168.0.1 to
xdebug.remote_host=192.168.0.2. If doesn't work verify you have port
configured in xdebug.remote_port open on both machines.
If all seems to be correct but you still get "Waiting For Connection" from inside netbeans you should try in your php.ini settings
xdebug.remote_connect_back=on
as it allows connection from ANY ip or look at a lot more info on the issue http://www.devside.net/wamp-server/netbeans-waiting-for-connection-netbeans-xdebug-issue
My work setup is a Windows XP host, running an Ubuntu VM LAMP stack. I am using PhpStorm to edit my code on my host Windows machine. Upon saving files are automatically uploaded to the VM via SFTP. Everything works for this process, except debugging.
I have setup PhpStorm to have a server named "UbuntuVM" with the following settings:
Debugger:
- XDebug
Debug session settings:
- Break at the first line
- Wait for connection with ide key: XDEBUG_PHPSTORM
Before launch:
- Upload files to selected server
I am using Chrome with Xdebug Helper, and have set the extension to use "Other" as the IDE, with "XDEBUG_PHPSTORM" as the key.
The VM has the following in the php.ini:
zend_extension="/usr/lib/php5/20090626+lfs/xdebug.so"
xdebug.remote_enable=1
xdebug.remote_host=10.1.6.22
xdebug.remote_port=9000
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.collect_params=On
xdebug.show_local_vars=On
When I set a break point in my IDE, enable the debugger in Chrome, and reload the page, I never hit the break point; and the IDE says "Waiting for connection on port 9000 with ide key 'XDEBUG_PHPSTORM'".
Does anyone have any idea why I'm not hitting my break points?
Comes to find out that xdebug.remote_host isn't needed, rather, use xdebug.remote_connect_back=1.