The web startup I'm working at gets a spike in number of concurrent web users from 5000 on a normal day to 10,000 on weekends. This Saturday the traffic was so high that we started getting a "too many connections" error intermittently. Our CTO fixed this by simply increasing the max_connections value on the tatabase servers. I want to know if using one persistent connection is a better solution here?
i.e. instead of using:
$db = new mysqli('db_server_ip', 'db_user', 'db_user_pass', 'db_name');
We use:
$db = new mysqli('p:db_server_ip', 'db_user', 'db_user_pass', 'db_name');
We're already using multiple MySQL servers and as well as multiple web servers (Apache + mod_php).
You should share the database connection across multiple web requests. Every process that is running on the application server should get an own mysql connection, that is kept open as long as the process is running and reused for every web request that comes in.
From the PHP Docs:
Persistent connections are good if the overhead to create a link to your SQL server is high.
And
Note, however, that this can have some drawbacks if you are using a database with connection limits that are exceeded by persistent child connections. If your database has a limit of 16 simultaneous connections, and in the course of a busy server session, 17 child threads attempt to connect, one will not be able to.
Persistent connections aren't the solution to your problem. Your problem is that your burst usage is beyond the limits set in your database configuration, and potentially your infrastructure. What your CTO did, increasing the connection limit, is a good first step. Now you need to monitor the resource utilization on your database servers to make sure they can handle the increased load from additional connections. If they can, you're fine. If you start seeing the database server running out of resources, you'll need to set up additional servers to handle the burst in traffic.
Too Many Connections
Cause
This is error is caused by
a lot of simultaneous connections, or
by old connections not being released soon enough
You already did SHOW VARIABLES LIKE "max_connections"; and increased the value.
Permanent Connections
If you use permanent or persistent database connections, you have to always take the MySQL directive wait_timeout into account. Closing won't work, but you could lower the timeout. So used resources will be faster available again. Utilize netstat to find out whats going on exactly as described here https://serverfault.com/questions/355750/mysql-lowering-wait-timeout-value-to-lower-number-of-open-connections.
Do not forget to free your result sets to reduce wasting of db server resources.
Be advised to use temporary, short lived connections instead of persistent connections.
Introducing persistence is pretty much against the whole web request-response flow, because it's stateless. You know: 1 pconnect request, causes an 8 hour persistant connection dangling around at the db server, waiting for the next request, which never comes. Multiply by number of users and look at your resources.
Temporary connections
If you use mysql_connect() - do not forget to mysql_close().
Set new_link set to false and pass the CLIENT_INTERACTIVE flag.
You might adjusting interactive_timeout, which helps in stopping old connections blocking up the work.
If the problem persists, scale
If the problem remains, then decide to scale.
Either by adding another DB server and putting a proxy in front,
(MySQL works well with HAProxy) or by switching to an automatically scaling cloud-service.
I really doubt, that your stuff is correctly configured.
How can this be a problem, when you are already running multiple MySQL servers, as well as multiple web servers? Please describe your load balancing setup.
Sounds like Apache 2.2 + mod_php + MySQL + unknown balancer, right?
Maybe try
Apache 2.4 + mod_proxy_fcgi + PHP 5.5/5.6 (php-fpm) + MySQL (InnoDb) + HAProxy or
Nginx + PHP 5.5/5.6 (php-fpm) + MySQL (InnoDb) + HAProxy.
We have developed chat module using node.js() and mongo sharding and gone live to production server. But today its reached 20000 connection in mongodb and getting error "Too many connection" in logs. After that we have restarted the node server and started again. now its comes normal. But we have to know how will solve this problem immediately.
Any configuration are there to set it in mongodb to kill the connection if not used or set the expire time while establish the connection.
Please help us to close this issue.
Regards,
Kumaran
You're probably not running into a MongoDB issue. There's a cap to the amount of connections you can make to MongoDB that's usually roughly equal to the maximum number of file descriptors available to it.
It sounds like there is a bug in your code (likely) or mongoose (less likely) that either creates more connections than it closes or never closes connections in the first place. In Java for example creating a new "Mongo" class instance for each query would result in this sort of problem but I don't work with node.js/mongoose so I do not know what the JS equivalent of that is.
Keep an eye on mongostat and check to see if the connection count always increases or if it decreases sometimes. If it's the former your code never releases connections for whatever reason. If it's the latter you're simply creating them faster than idle connections are disconnected. That's usually due to doing something heavy weight (like the driver initialising it's connection pool) for every query rather than once.
I'm currently using mongoDB in my development server. Using PHP 1.1.4 driver and connecting to mongoDB with persist command.
But somehow my db connection number is gradually increasing but never seems to end those connections perhaps no timeout?
I'm worried that if I deploy my source, it might cause some problem that full of connection pool won't let people to use mongoDB at all.
How can I set timeout shorter or somehow resolve gradually increasing connection problem though there is only one user.
Each instance of your running code uses its own pool of persistant connections.
Are the operations assigned to each connection getting finished fast ? There might be slow queries in your code. Do share the snapshot of mongostat from your running instance. That would help. It mongostat shows everything is fine, then it might be PHP mongodb driver bug.
See :
http://groups.google.com/group/mongodb-user/browse_thread/thread/ac005be798b6adea?pli=1
What I would suggest is, use non-persistant connections and explicitly close them at the end of your script.
http://php.net/manual/en/mongo.close.php
Though there is a little performance hit as persistant connections are better, but that can be ignored for moderate traffic.
In PDO, a connection can be made persistent using the PDO::ATTR_PERSISTENT attribute. According to the php manual -
Persistent connections are not closed at the end of the script, but
are cached and re-used when another script requests a connection using
the same credentials. The persistent connection cache allows you to
avoid the overhead of establishing a new connection every time a
script needs to talk to a database, resulting in a faster web
application.
The manual also recommends not to use persistent connection while using PDO ODBC driver, because it may hamper the ODBC Connection Pooling process.
So apparently there seems to be no drawbacks of using persistent connection in PDO, except in the last case. However., I would like to know if there is any other disadvantages of using this mechanism, i.e., a situation where this mechanism results in performance degradation or something like that.
Please be sure to read this answer below, which details ways to mitigate the problems outlined here.
The same drawbacks exist using PDO as with any other PHP database interface that does persistent connections: if your script terminates unexpectedly in the middle of database operations, the next request that gets the left over connection will pick up where the dead script left off. The connection is held open at the process manager level (Apache for mod_php, the current FastCGI process if you're using FastCGI, etc), not at the PHP level, and PHP doesn't tell the parent process to let the connection die when the script terminates abnormally.
If the dead script locked tables, those tables will remain locked until the connection dies or the next script that gets the connection unlocks the tables itself.
If the dead script was in the middle of a transaction, that can block a multitude of tables until the deadlock timer kicks in, and even then, the deadlock timer can kill the newer request instead of the older request that's causing the problem.
If the dead script was in the middle of a transaction, the next script that gets that connection also gets the transaction state. It's very possible (depending on your application design) that the next script might not actually ever try to commit the existing transaction, or will commit when it should not have, or roll back when it should not have.
This is only the tip of the iceberg. It can all be mitigated to an extent by always trying to clean up after a dirty connection on every single script request, but that can be a pain depending on the database. Unless you have identified creating database connections as the one thing that is a bottleneck in your script (this means you've done code profiling using xdebug and/or xhprof), you should not consider persistent connections as a solution to anything.
Further, most modern databases (including PostgreSQL) have their own preferred ways of performing connection pooling that don't have the immediate drawbacks that plain vanilla PHP-based persistent connections do.
To clarify a point, we use persistent connections at my workplace, but not by choice. We were encountering weird connection behavior, where the initial connection from our app server to our database server was taking exactly three seconds, when it should have taken a fraction of a fraction of a second. We think it's a kernel bug. We gave up trying to troubleshoot it because it happened randomly and could not be reproduced on demand, and our outsourced IT didn't have the concrete ability to track it down.
Regardless, when the folks in the warehouse are processing a few hundred incoming parts, and each part is taking three and a half seconds instead of a half second, we had to take action before they kidnapped us all and made us help them. So, we flipped a few bits on in our home-grown ERP/CRM/CMS monstrosity and experienced all of the horrors of persistent connections first-hand. It took us weeks to track down all the subtle little problems and bizarre behavior that happened seemingly at random. It turned out that those once-a-week fatal errors that our users diligently squeezed out of our app were leaving locked tables, abandoned transactions and other unfortunate wonky states.
This sob-story has a point: It broke things that we never expected to break, all in the name of performance. The tradeoff wasn't worth it, and we're eagerly awaiting the day we can switch back to normal connections without a riot from our users.
In response to Charles' problem above,
From : http://www.php.net/manual/en/mysqli.quickstart.connections.php -
A common complain about persistent connections is that their state is
not reset before reuse. For example, open and unfinished transactions
are not automatically rolled back. But also, authorization changes
which happened in the time between putting the connection into the
pool and reusing it are not reflected. This may be seen as an unwanted
side-effect. On the contrary, the name persistent may be understood as
a promise that the state is persisted.
The mysqli extension supports both interpretations of a persistent
connection: state persisted, and state reset before reuse. The default
is reset. Before a persistent connection is reused, the mysqli
extension implicitly calls mysqli_change_user() to reset the state.
The persistent connection appears to the user as if it was just
opened. No artifacts from previous usages are visible.
The mysqli_change_user() function is an expensive operation. For
best performance, users may want to recompile the extension with the
compile flag MYSQLI_NO_CHANGE_USER_ON_PCONNECT being set.
It is left to the user to choose between safe behavior and best
performance. Both are valid optimization goals. For ease of use, the
safe behavior has been made the default at the expense of maximum
performance.
Persistent connections are a good idea only when it takes a (relatively) long time to connect to your database. Nowadays that's almost never the case. The biggest drawback to persistent connections is that it limits the number of users you can have browsing your site: if MySQL is configured to only allow 10 concurrent connections at once then when an 11th person tries to browse your site it won't work for them.
PDO does not manage the persistence. The MySQL driver does. It reuses connections when a) they are available and the host/user/password/database match. If any change then it will not reuse a connection. The best case net effect is that these connections you have will be started and stopped so often because you have different users on the site and making them persistent doesn't do any good.
The key thing to understand about persistent connections is that you should NOT use them in most web applications. They sound enticing but they are dangerous and pretty much useless.
I'm sure there are other threads on this but a persistent connection is dangerous because it persists between requests. If, for example, you lock a table during a request and then fail to unlock then that table is going to stay locked indefinitely. Persistent connections are also pretty much useless for 99% of your apps because you have no way of knowing if the same connection will be used between different requests. Each web thread will have it's own set of persistent connections and you have no way of controlling which thread will handle which requests.
The procedural mysql library of PHP, has a feature whereby subsequent calls to mysql_connect will return the same link, rather than open a different connection (As one might expect). This has nothing to do with persistent connections and is specific to the mysql library. PDO does not exhibit such behaviour
Resource Link : link
In General you could use this as a rough "ruleset"::
YES, use persistent connections, if:
There are only few applications/users accessing the database, i.e.
you will not result in 200 open (but probably idle) connections,
because there are 200 different users shared on the same host.
The database is running on another server that you are accessing over
the network
An (one) application accesses the database very often
NO, don't use persistent connections, if:
Your application only needs to access the database 100 times an hour.
You have many, many webservers accessing one database server
Using persistent connections is considerable faster, especially if you are accessing the database over a network. It doesn't make so much difference if the database is running on the same machine, but it is still a little bit faster. However - as the name says - the connection is persistent, i.e. it stays open, even if it is not used.
The problem with that is, that in "default configuration", MySQL only allows 1000 parallel "open channels". After that, new connections are refused (You can tweak this setting). So if you have - say - 20 Webservers with each 100 Clients on them, and every one of them has just one page access per hour, simple math will show you that you'll need 2000 parallel connections to the database. That won't work.
Ergo: Only use it for applications with lots of requests.
On my tests I had a connection time of over a second to my localhost, thus assuming I should use a persistent connection. Further tests showed it was a problem with 'localhost':
Test results in seconds (measured by php microtime):
hosted web: connectDB: 0.0038912296295166
localhost: connectDB: 1.0214691162109 (over one second: do not use localhost!)
127.0.0.1: connectDB: 0.00097203254699707
Interestingly: The following code is just as fast as using 127.0.0.1:
$host = gethostbyname('localhost');
// echo "<p>$host</p>";
$db = new PDO("mysql:host=$host;dbname=" . DATABASE . ';charset=utf8', $username, $password,
array(PDO::ATTR_EMULATE_PREPARES => false,
PDO::ATTR_ERRMODE => PDO::ERRMODE_EXCEPTION));
Persistent connections should give a sizable performance boost. I disagree with the assement that you should "Avoid" persistence..
It sounds like the complaints above are driven by someone using MyIASM tables and hacking in their own versions of transactions by grabbing table locks.. Well of course you're going to deadlock! Use PDO's beginTransaction() and move your tables over to InnoDB..
seems to me having a persistent connection would eat up more system resources. Maybe a trivial amount, but still...
The explanation for using persistent connections is obviously reducing quantity of connects that are rather costly, despite the fact that they're considerably faster with MySQL compared to other databases.
The very first trouble with persistent connections...
If you are creating 1000's of connections per second you normally don't ensure that it stays open for very long time, but Operation System does. Based on TCP/IP protocol Ports can’t be recycled instantly and also have to invest a while in “FIN” stage waiting before they may be recycled.
The 2nd problem... using a lot of MySQL server connections.
Many people simply don't realize you are able to increase *max_connections* variable and obtain over 100 concurrent connections with MySQL others were beaten by older Linux problems of the inability to convey more than 1024 connections with MySQL.
Allows talk now about why Persistent connections were disabled in mysqli extension. Despite the fact that you can misuse persistent connections and obtain poor performance which was not the main reason. The actual reason is – you can get a lot more issues with it.
Persistent connections were put into PHP throughout occasions of MySQL 3.22/3.23 when MySQL was not so difficult which means you could recycle connections easily with no problems. In later versions quantity of problems however came about – Should you recycle connection that has uncommitted transactions you take into trouble. If you recycle connections with custom character set configurations you’re in danger again, as well as about possibly transformed per session variables.
One trouble with using persistent connections is it does not really scale that well. For those who have 5000 people connected, you'll need 5000 persistent connections. For away the requirement for persistence, you may have the ability to serve 10000 people with similar quantity of connections because they are in a position to share individuals connections when they are not with them.
I was just wondering whether a partial solution would be to have a pool of use-once connections. You could spend time creating a connection pool when the system is at low usage, up to a limit, hand them out and kill them when either they've completed or timed out. In the background you're creating new connections as they're being taken. At worst case this should only be as slow as creating the connection without the pool, assuming that establishing the link is the limiting factor?
Trying to separate out my LAMP application into two servers, one for php and one for mysql. So far the application connects locally through a file socket and works fine.
I'm worried about the number connections I can establish if it is over the network. I have been testing tcp connections on unix for benchmark purposes and I know that you cannot exceed a certain amount of connections per second otherwise it halts due to the lack of resources (be it sockets, or file handles or whatever). I also understand that php does not implement connection pooling so for each page load a new connection over the network must be made. I also looked into pconnect for php and it seems to bring more problems.
I know this is a very very common setup (php+mysql), can anyone provide some typical usage and statistics they get out of their servers? Thanks!
The problem is not related to running out of connections allowed my MySQL. The main problem is that unix cannot very quickly create and tear down tcp connections. Sockets end up in TIME_WAIT and you have to wait for a period before you free up more sockets to connect again. These two screenshots clearly shows this pattern. MySQL does work up to a certain point and then pauses because the web server ran out of sockets. After certain amount of time passed, the web server was able to make new connections.
alt text http://img35.imageshack.us/img35/3809/picture4k.png
alt text http://img35.imageshack.us/img35/4580/picture2uyw.png
I think the limit is at 65535. So you'd have to have 65535 connections at the same time to hit that limit since a regular mysql connection closes automatically.
mysql_connect()
Note: The link to the server will be closed as soon as the execution of the script ends, unless it's closed earlier by explicitly calling mysql_close().
But if you're using a persistent mysql connection, then you can run into trouble.
Using persistent connections can require a bit of tuning of your Apache and MySQL configurations to ensure that you do not exceed the number of connections allowed by MySQL.
Each MySQL connection actually uses several meg of ram for various buffers, and takes a while to set up, which is why MySQL is limited to 100 concurrent open connections by default. You can up that limit, but it's better to spend your time trying to limit concurrent connections, via various methods.
Beware of raising the connection limit too high, as you can run out of memory (which, I believe, crashes mysql), or you may push important things out of memory. e.g. MySQL's performance is highly dependent on the OS automatically caching the data it reads from disk in memory; if you set your connection limit too high, you'll be contending for memory with the cache.
If you don't up your connection limit, you'll run out of connections long before your run out of sockets/file handles/etc. If you do increase your connection limit, you'll run out of RAM long before you run out of sockets/file handles/etc.
Regarding limiting concurrent connections:
Use a connection pooling solution. You're right, there isn't one built in to PHP, but there are plenty of standalone ones out there to choose from. This saves expensive connection setup/tear down time.
Only open database connections when you absolutely need them. In my current project, we automatically open a database connection when the first query is issued, and not a moment before; we also release the connection after we've done all our database work, but before the page's HTML is actually generated. The shorter the period of time you hold connections open, the fewer connections will be open simultaneously.
Cache what you can in a lighter-weight solution like memcached. My current project temporarily caches pages displayed to anonymous users (since every anonymous user gets the same HTML, in the end -- why bother running the same database queries all over again a few scant milliseconds later?), meaning no database connection is necessary at all. This is especially useful for bursts of anonymous traffic, like a front-page digg.