I'm serving some videos. Basically the user uses VLC to play a https stream, the request hits my server then I look at the HTTP-RANGE request and provide the asked bytes. I would like to save the user progression timestamp in the videos. I tried to served_byte/video_size*video_duration but this is not working properly.
I also tried using ffprobe like this ffprobe -i cool.mkv -show_entries packet=pos,pts_time -select_streams v -of compact=p=0:nk=1 -v 0 (see this post) but it takes approximately 5s to parse a 3Gb video which is quiet long...
Isn't there just a simpler way to have the timestamp for a given byte?
Cheers :)
I'm using php wget to download mp4 files from another server
exec("wget -P files/ $http_url");
but I didn't find any option to check if file downloaded correctly, or not yet.
I tried to get duration file using getID3(), but it always return good value, even if file not downloaded correctly
// Check file duration
$file = $getID3->analyze($filepath);
echo $file['playtime_string']; // 15:00 always good value
there is any function to check that?
Thanks
First off I would try https instead. If the server(s) you're connecting to happen to support it, you get around this entire issue because lost bytes are usually caused by flaky hardware or bad MTU settings on a router on their network. The http connections gracefully degrade to giving you as much of the file as it could manage, whereas https connections just plain fail when they lose bytes because you can't decrypt non-intact packets.
Lazy IT people tend to get prodded to fix complete failures of https, but they get less pressure to diagnose and fix corner cases like missing bytes that only occur larger transactions over http.
If https is not available, keep reading.
An HTTP server response may include a Content-Length header indicating the number of bytes in a particular transaction.
If the header is there, you should be able to see it by running wget directly, adding the -v flag.
If it's not there, I believe wget will report Length: unspecified followed by the content-type header's value.
If it tells you (and assuming the byte count is accurate) then you can just compare the byte count of the file you got and the one in the transaction.
If the server(s) you're contacting don't provide this header, you're left with less exact methods, like finding some player that will basically play the mp3 until it ends and then see how long it took and then compare that to the length listed in the ID3 tag (which is in the very beginning of the file). You're not going to be able to get an exact match though, because the time in the tag (if it's there) is only accurate to the second, meaning half a second could be gone from the end of the file and you wouldn't know.
I notice that when I use file_get_contents I seem to be using more bandwidth than I should. For example:
file_get_contents('https://example.com',false,$ctx,0,99000);
Will cause my network RX to jump up about 1.6mb (just using ifconfig and comparing before and after).... I would think it should only jump by 99kb, because I've specified that with the 99000?
file_get_contents is a rather buggy function in PHP. Consider using curl and following this solution:
how to set a maximum size limit to php curl downloads
I'm trying to retrieve a remote file (6MB text file) with PHP and I noticed that with fopen the speed is limited to 100KB/s and with file_get_contents is 15KB/s.
Howewer with wget from the server the speed is above 5MB/s.
What controls these speeds?
I checked the live speeds with nethogs.
wget is great on it's own to mirror sites it can actually parse links from pages and download files.
file_get_contents doesn't send a "connection" HTTP header, so the remote web server considers by default that's it's a keep-alive connection and doesn't close the TCP stream until 15 seconds (It might not be a standard value - depends on the server conf).
A normal browser would consider the page is fully loaded if the HTTP payload length reaches the length specified in the response Content-Length HTTP header. File_get_contents doesn't do this and that's a shame.
SOLUTION
SO, if you want to know the solution, here it is:
$context = stream_context_create(array('http' => array('header'=>'Connection: close\r\n')));
file_get_contents("http://www.something.com/somepage.html",false,$context);
The thing is just to tell the remote web server to close the connection when the download is complete, as file_get_contents isn't intelligent enough to do it by itself using the response Content-Length HTTP header.
I am having following problem:
I am running BIG memory process but have divided memory load into smaller chunks so no CPU time out issue.
In the Server I am creating .xml files with around 100kb sizes and they will be created around 100+.
Now main problem is browser shows Response Time out and IE at the below (just upper status bar) shows .php file download message.
During this in the backend (Server side) process is still running and continuously creating .xml files in incremental order. So no issue with that.
I have following php.ini configuration.
max_execution_time = 10000 ; Maximum execution time of each script, in seconds
max_input_time = 10000 ; Maximum amount of time each script may spend parsing request data
memory_limit = 2000M ; Maximum amount of memory a script may consume (128MB)
; Maximum allowed size for uploaded files.
upload_max_filesize = 2000M
I am running my site on IE. And I am using ZSCE with PHP 5.3
Can anybody redirect me on proper way on this issue?
Edit:
Uploading image of Time out and that's why asking for .php file download.
Edit 2:
I briefly explain my execution flow:
I have one PHP file with objects of Class Hierarchies which will start to execute Function1() from each class Hierarchy.
I have class file.
First, let say, Function1() is executed which contains logic of creating XML files in chunks.
Second, let say, Function2() is executed which will display output generated by Function1().
All is done in Class Hierarchies manner. So I can't terminate, in between, execution of Function1() until it get executed. And after that Function2() will be called.
Edit 3:
This is specially for #hakre.
As you asked some cross questions and I agree with some points but let me describe more in detail about the issue.
First I was loading around 100+ MB size XML Files at a time and that's why my Memory in local setup was hanging and stops everything on Machine and CPU time was utilizing its most resources.
I, then, divided this big size XML files in to small size (means now I am loading single XML file at a time and then unloading it after its usage). This saved me from Memory overload and CPU issue on local setup.
Now my backend process is running no CPU or Memory issue but issue is with Browser Timeout. I even tried cURL but as per my current structure it does seems to fit because of my class hierarchy issue. I have a set of classes in hierarchy and they all execute first their Process functions and then they all execute their Output functions. So unless and until Process functions get executed the Output functions do not comes in picture and that's why Browser shows Timeout.
I even followed instructions suggested by #vortex and got little success but not what I am looking for. Why I could not implement cURl because My process function is Creating required XML files at one go so it's taking too much time to output to Browser. As Process function is taking that much time no output is possible to assign to client unless and until it get completed.
cURL Output:
URL....: myurl
Code...: 200 (0 redirect(s) in 0 secs)
Content: text/html Size: -1 (Own: 433) Filetime: -1
Time...: 60.437 Start # 60.437 (DNS: 0 Connect: 0.016 Request: 0.016)
Speed..: Down: 7 (avg.) Up: 0 (avg.)
Curl...: v7.20.0
Contents of test.txt file
* About to connect() to mylocalhost port 80 (#0)
* Trying 127.0.0.1... * connected
* Connected to mylocalhost (127.0.0.1) port 80 (#0)
\> GET myurl HTTP/1.1
Host: mylocalhost
Accept: */*
< HTTP/1.1 200 OK
< Date: Tue, 06 Aug 2013 10:01:36 GMT
< Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8o
< X-Powered-By: PHP/5.3.9-ZS5.6.0 ZendServer
< Set-Cookie: ZDEDebuggerPresent=php,phtml,php3; path=/
< Cache-Control: private
< Transfer-Encoding: chunked
< Content-Type: text/html
<
* Connection #0 to host mylocalhost left intact
* Closing connection #0
Disclaimer : An answer for this question is chosen based on the first little success based on answer selected. The solution from #Hakre is also feasible when this type of question is occurred. But right now no answer fixed my question but little bit. Hakre's answer is also more detail in case of person finding for more details about this type of issues.
assuming you made all the server side modifications so you dodge a server timeout [i saw pretty much everyting explained above], in order to dodge browser timeout it is crucial that you do something like this
<?php
set_time_limit(0);
error_reporting(E_ALL);
ob_implicit_flush(TRUE);
ob_end_flush();
I can tell you from experience that internet explorer doesn't have any issues as long as you output some content to it every now and then. I run a 30gb database update everyday [that takes around 2-4 hours] and opera seems to be the only browser that ignores the content output.
if you don't set "ob_implicit_flush" you need to do an "ob_flush()" after every piece of content.
References
ob_implicit_flush
ob_flush
if you don't use ob_implicit_flush at the top of your script as I wrote earlier, you need to do something like:
<?php
echo 'dummy text or execution stats';
ob_flush();
within your execution loop
1. I am running BIG memory process but have divided memory load into smaller chunks so no CPU time out issue.
Now that's a wild guess. How did you find out it was a CPU time out issue in the first place? Did you even? If yes, what does your test now gives? If not, how do you test now that this is not a time-out issue?
Despite you state there won't be a certain issue, you don't proof that and many questions are still open. That invites for guessing which is counter-productive for trouble-shooting (which you are doing here).
What you write here just means that you wrote code to chunk memory, however, this is not a test for CPU time out issues. The one is writing code the other part is test. Don't mix the two. And don't draw wild assumptions. Issues are for the test, otherwise it didn't happen.
So much for your first point already just to show you that when doing troubleshooting, look for facts (monitor, test, profile, step-debug) not run assumptions. This is curcial otherwise you look in the wrong places and ask the wrong questions.
From what you describe how the client (browser) behaves, this is not a time-out-issue per-se. The problem you've got is that the answer between the header response and the body response is taking to long for the taste of your browser. The one browser is assuming a time-out (as such a boundary value has been triggered and this looks more correct to me) and the other browser is assuming somthing is coming up, why not save it.
So you merely have a processing issue here. Please consult the menual of your internet browsers (HTTP clients) which configuration values you can change to change this behavior. E.g. monitor with a curl-request on the command-line how long the request actually take. Then configure your browser to not time-out when connecting to that server under such an amount of time you just measured. For example if you're using Internet Explorer: http://www.ehow.com/how_6186601_change-internet-timeout-options.html or if you're using Mozilla Firefox: http://forums.mozillazine.org/viewtopic.php?f=7&t=102322&start=0
As you didn't show any code on the server-side I assume you want to solve this problem with client settings. Curl will help you to measure the number of seconds such a request takes. Use the -v (Verbose) switch to obtain detailed information about the request.
In case you don't want to solve this on the client, curl will still help you to measure important data and easily reproduce any underlying server-related timing issue. So you should go for Curl on the command-line in any case, especially as looking into response-headers might reveal what triggers the (again) esoteric internet explorer behavior. Again the -v switch does reveal you request and response headers.
If you like to automate such tests with a PHP script, it's also possible with the PHP Curl Extension. This has been outlined in:
Php - Debugging Curl
The problem is with your web-server, not the browser.
If you're using Apache, you need to adjust your Timeout value at httpd.conf or virtual hosts config.
You have 3 pages
Process - Creates the XML files and then updates a database value saying that the process is done
A PHP page that returns {true} or {false} based on the status of the process completion database value
An ajax front end, polling page 2 every few seconds to check weather the process is done or not
Long Polling
I have had this issue several times, while reading large csv file and puting it in database. I solved it in way, that i divided the reading and putting in database process into smaller parts. Like i created a new table to make log of how much data is readed and inserted, and next time the page reloads itself and start from that position. So you can do it by creating one xml in one attempt,and reload page and start form next one. In this way the memory used by browser is refreshed.
Hope it will help.
Is it possible to send some output to browser from the script while it's still processing, even white space? If, then do it, it should reset the timeout counter.
If it's not possible, you have to increase the timeout of IE in the registry:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
You need ReceiveTimeout, if it's not there, create it as dword, and set the value in miliseconds.
What is a "CPU time out issue"?
The right way to solve the problem is to run the heavy stuff asynchronously, in a seperate session group (not the webserver process tree).
Try to include set_time_limit(0); in your PHP script page.
The following links might help you.
http://php.net/manual/en/function.set-time-limit.php
http://php.net/manual/en/function.ignore-user-abort.php