I have wamp running fine with 2 virtual hosts. But after installation of vmaware wamp server not starting. Any idea about this problem? Or how can i figure what make wamp not starting, does it store its error log somewhere?
I am using widows 7.
Thanks
It is possible that WMWare uses the same port as WAMP. I remember Skype doing this resulting in APACHE being unable to start the servers on its port.
You can use this tutorial to try and change the vSphere port from it's 80 default:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1021199
LE: There could be some other WMWare component that uses the 80 port. Try closing all WMWare components and start WAMP. If it works, then WMWare is using the 80 port.
Most probably the 2 fight over the same port (80). Also, Skype might cause WAMP to fail at starting and to display "304" errors for every GET request on the server.
Change WAMP's listening port from \wamp\bin\apache\apache2.2.8\conf. Locate httpd.conf, open it with a text editor and search for listening. Change to whatever port you consider.
Related
XAMPP server should run on port : 80 by default, but here in our case XAMPP server running on multiple ports shown in the span short below.
Why it happens and how to prevent this?
Also TaskMgr shows two apache services running:
XAMPP httpd.conf file is here:
After running 2 or 3 hours XAMPP server, Server got slow and not responding where I think the problem would be generated by the multiple open ports?
Any idea? how to block and allow only port 80 as it is already by default?
it's mostly because of internal connections between apache and another service on the server.
for example it could be because connecting to 3306 (mysql)
to find out that you can use netstat button on the right of the xampp panel
or type this command in command prompt (DOS)
netstat -na
e.g: if you saw lots of :3306 it means that you did not close mysql connection!
I am currently using WAMP server on my Windows XP SP2 system. I just want to know why do I need to use localhost:8080 instead of just localhost to connect to my server-WAMP? I'm not that interested in this :8080 stuff.
So if you guys know why this happens, or how to exclude :8080 from the address, just help me through. Thank you very much by the way. Have a nice day.
Notice: Please don't tell me to switch to XAMPP. I know it works well.
This happens because your server is listening on port 8080, and not on port 80 which is the default (so when you type localhost you mean localhost:80).
So, you need to change your configuration to make WAMP listening on port 80. You find here how to do this: How to change port number for apache in WAMP.
I am installing an open source software, which is `vtiger, and that use mysql and php
The first screen in installing that software asks for mysql and apache code,
the installation tools set these values as:
apache port 8888
and mysql port 33307
but when I open my xampp I see different ports like this:
Should I change the values of these ports to the values that I see in the image or not?
Thanks in advance
edit
this is what the installation tool suggest
so should I replace the 8888 with the 8082
and should I replace the 33307 with 3306 ?
Mysql's default port is 3306, and your XAMPP control panel shows that's the one in use, so you don't need to touch anything here.
As per apache webserver, the default http port is 80, which in this case you could access with
http://localhost
but you can use pretty much whatever you want as long as you append the port number to the url
http://localhost:8082
http://localhost:8082/anotherpage.html
Your Apache webserver is listening to both 4430 and 8082. I wonder if http://localhost:4430 would try to open as https, but I believe that is irrelevant at this point.
Long story short: if you aren't planning to use any other app on port 80, just set Apache to listen to port 80 to forget about appending port numbers on your urls.
When I run XAMPP Control Panel v3.2.1 I get this error:
07:37:24 [Apache] Problem detected!
07:37:24 [Apache] Port 443 in use by ""C:\Program Files (x86)\VMware\VMware Workstation\vmware-hostd.exe" -u "C:\ProgramData\VMware\hostd\config.xml"" with PID 2148!
07:37:24 [Apache] Apache WILL NOT start without the configured ports free!
07:37:24 [Apache] You need to uninstall/disable/reconfigure the blocking application
07:37:24 [Apache] or reconfigure Apache and the Control Panel to listen on a different port
I could not fix it myself. Getting help soon will be thankful.
It's easier to change the port in VMware Workstation:
Edit > Preferences;
Shared VMs tab;
Disable;
Change port;
Enable.
Done.
Here is the solution step-by-step:
Open up httpd-ssl.conf in path2xampp\apache\conf\extra
Look for the line Listen 443
Change port number to anything you want. I use 4430. ex. Listen 4430.
Replace every 443 string in that file with 4430.
Save the file.
and, Finally restart your apache.
done.
Run vmware as administrator in windows or as root in linux. Then ctrl+P to open preferences. then on shared vms. You can see a port number 443 by default. This is conflicting with apache that is why it is not starting. Change it to some other value say 8443. Then try to start apache it will run.
Just go to vmvare edit->preferences->shared vms. Click on change settings and disable sharing.click on OK.xampp will work fine.
Connecting to shared virtual machines
Connection to VMware Workstation Server (the shared virtual machines) is administered by the VMware Host Agent service. The service uses TCP ports 80 and 443. This service is also used by other VMware products, including VMware Server and vSphere, and provides additional capabilities.
Configuring shared virtual machines
With the Shared VMs Workstation preferences, you can disable/enable the server, assign a different port for connecting, and change the Shared VMs directory.
To access the Shared VMs Workstation preferences:
Go to Edit > Preferences.
Click the Shared VMs tab.
Open VMware Workstation > Edit > Prefrences > Shared VMS > Change port 433 > 4330 > save.
Follow the process Showed in the Following video :
https://youtu.be/DYj7qIgwV2M
Here is the solution:
You use Ctrl+Alt+Delete, open task manager and switch to tab services find VMWareHostd and right click to chose StopService. You can start xampp without error
On Xampp edit apache config
Click Apache 'config'
Select 'httpd-ssl.conf'
Look for 'Listen 443',
change it to 'Listen 4430'
Say you let vmware use port 443, and use another ssl port in XAMPP Apache (httpd-ssl.conf) :
The red error will keep popping in XAMPP Control Panel.
You also need to change the port in the XAMPP Control Panel configuration :
In XAMPP Control Panel, click the "Config" button (top-left).
Then click "Service and Port Settings". There you can set the ports to match the ports used by Apache.
If there is no Shared VMs tab, you can edit the config manually.
Go to C:\ProgramData\VMware\hostd, and open proxy.xml with a text editor.
At the top, there should be <httpsPort>443</httpsPort>. Change it to -1.
Kill the process using Powershell:
Stop-Process -Id <PROCESS_ID>
Use the process ID provided in XAMPP's Control Panel's log.
You should be able to start Apache now.
Run XAMPP Control Panel as Administrator if using Windows 7 or more. Windows may block access to ports if not accessed by adminstrator user.
I recently tried installing WAMP but found that none of the pages will load. It also has an orange W logo, if that means anything. It does say (Tray Icon) that the WAMPserver is online though. I also did some research and found that Skype may cause problems and I removed the Use port 80 and 443 as alternatives for incoming connections option, but it still won't work. I get the following screen in my Chrome browser, any ideas?
EDIT: After further research I found that something may have gone wrong with the installation and Skype. I don't know how this happened but after a re-instillation everything worked fine. Thanks for your guy's help.
The orange logo indicates that at least one service failed to start. You might try the following to troubleshoot the underlying reason:
Check that the Apache service is running. Left-click the WAMP tray icon and check that under Apache > Service, the option to start the service is disabled/grayed out. If not, your Apache service isn't running and that's the cause.
Check the port Apache is listening on. Again. left-click the WAMP icon, Apache > httpd.conf should open the configuration. Look for the Listen XX directive and note what the value for XX is. If not 80, you should use the url http://localhost:XX instead.
If the value for Listen was indeed 80, you might want to check what process is bound to port 80. Left-click the tray icon, Apache > Service > Test port 80. This should tell you what process is bound to port 80. If nothing is listening at port 80, you should see the message Your port 80 is not actually used.. If Apache actually is listening on that port, you should see something like Apache/<version> (Win32) PHP/<version>.
Finally, check the Apache error log. Left-click the icon, Apache > Apache error log. Scroll to the end of the file and look for any messages that might be relevant.
Try a different browser
Telnet to port XX and see if you're able to connect.
For this problem go :
wamp > Apache > Service > Install Service
After Install Your Apache Is Ok :D
if not running, open this address use your web browser:
127.0.0.1
(usually This problem see in Windows 8)
Skype uses port 80 if it is free. No need to uninstall skype, just start your webserver before skype and everything should be fine. Skype will find another port.