Using array_multisort - php

I'm using array_multisort at the beginning of a script after querying the database. Works fine. The arrays are sorted.
Later on in the same script, I use array_multisort again after another query to the database. The arrays are the same length for this second call but a different length than the arrays used initially.
I'm getting the "array_multisort array sizes are inconsistent" warning in my error_log. Are the arrays persisting from one call to the next and therefore, causing this error? If so, is there a way to clean up the function and remove the initial arrays used before the second call?
Here's a summarized view of the code with var_dump output included:
...1st query...
...1st array_multisort use based on the query...
array_multisort($shiftdate, $beg24, $uniquename, $subunit, $unit, $dept, $shiftdetail, $scheduledStaff);
...1st var_dump values based on array_multisort...
array(3) {
[0]=>
array(10) {
["uniquename"]=>
string(3) "Bob"
["shiftdate"]=>
string(10) "2012-08-12"
["subunit"]=>
string(1) "1"
["unit"]=>
string(1) "1"
["dept"]=>
string(1) "1"
["shiftdetail"]=>
string(5) "7a-3p"
["firstname"]=>
string(0) ""
["lastname"]=>
string(0) ""
["email"]=>
string(0) ""
["beg24"]=>
string(4) "7.00"
}
[1]=>
array(10) {
["uniquename"]=>
string(4) "Cara"
["shiftdate"]=>
string(10) "2012-08-12"
["subunit"]=>
string(1) "1"
["unit"]=>
string(1) "1"
["dept"]=>
string(1) "1"
["shiftdetail"]=>
string(5) "7a-3p"
["firstname"]=>
string(0) ""
["lastname"]=>
string(0) ""
["email"]=>
string(0) ""
["beg24"]=>
string(4) "7.00"
}
[2]=>
array(10) {
["uniquename"]=>
string(4) "Ryan"
["shiftdate"]=>
string(10) "2012-08-12"
["subunit"]=>
string(1) "1"
["unit"]=>
string(1) "1"
["dept"]=>
string(1) "1"
["shiftdetail"]=>
string(5) "7a-3p"
["firstname"]=>
string(0) ""
["lastname"]=>
string(0) ""
["email"]=>
string(0) ""
["beg24"]=>
string(4) "7.00"
}
}
...2nd query...
...2nd array_multisort use based on the query...
array_multisort($shiftdate, $beg24, $uniquename, $subunit, $unit, $dept, $shiftdetail, $firstname, $lastname, $email, $scheduledStaffAndThoseWithDetail);
...NOTE: error_log warning occurs at this second array_multisort use...PHP Warning: array_multisort() [<a href='function.array-multisort'>function.array-multisort</a>]: Array sizes are inconsistent...
...2nd var_dump values based on array_multisort...
array(2) {
[0]=>
array(10) {
["uniquename"]=>
string(4) "Ryan"
["shiftdate"]=>
string(10) "2012-08-12"
["subunit"]=>
string(1) "1"
["unit"]=>
string(1) "1"
["dept"]=>
string(1) "1"
["shiftdetail"]=>
string(5) "7a-3p"
["firstname"]=>
string(4) "Ryan"
["lastname"]=>
string(5) "Dobbs"
["email"]=>
string(17) "dobbsr#gmail.com"
["beg24"]=>
string(4) "7.00"
}
[1]=>
array(10) {
["uniquename"]=>
string(4) "Cara"
["shiftdate"]=>
string(10) "2012-08-12"
["subunit"]=>
string(1) "1"
["unit"]=>
string(1) "1"
["dept"]=>
string(1) "1"
["shiftdetail"]=>
string(5) "7a-3p"
["firstname"]=>
string(4) "Cara"
["lastname"]=>
string(6) "Smith"
["email"]=>
string(14) "cara#gmail.com"
["beg24"]=>
string(4) "7.00"
}
}

Related

Convert Nested set array To json parent-children using PHP

i have an array in nested set model https://en.wikipedia.org/wiki/Nested_set_model, And i need convert the array to json parent-children with infinite levels.
Array example:
array(6) {
[0]=>
array(8) {
["title"]=>
string(5) "cat 2"
["type"]=>
string(3) "url"
["class_name"]=>
string(0) ""
["content"]=>
string(6) "value2"
["id"]=>
string(3) "128"
["lft"]=>
string(1) "1"
["rgt"]=>
string(1) "4"
["depth"]=>
string(1) "0"
}
[1]=>
array(8) {
["title"]=>
string(5) "sub 1"
["type"]=>
string(3) "url"
["class_name"]=>
string(0) ""
["content"]=>
string(6) "value1"
["id"]=>
string(3) "129"
["lft"]=>
string(1) "2"
["rgt"]=>
string(1) "3"
["depth"]=>
string(1) "1"
}
[2]=>
array(8) {
["title"]=>
string(5) "cat 1"
["type"]=>
string(3) "url"
["class_name"]=>
string(0) ""
["content"]=>
string(6) "value1"
["id"]=>
string(3) "130"
["lft"]=>
string(1) "5"
["rgt"]=>
string(2) "10"
["depth"]=>
string(1) "0"
}
[3]=>
array(8) {
["title"]=>
string(5) "sub 2"
["type"]=>
string(3) "url"
["class_name"]=>
string(0) ""
["content"]=>
string(6) "value2"
["id"]=>
string(3) "131"
["lft"]=>
string(1) "6"
["rgt"]=>
string(1) "9"
["depth"]=>
string(1) "1"
}
[4]=>
array(8) {
["title"]=>
string(5) "sub 3"
["type"]=>
string(3) "url"
["class_name"]=>
string(0) ""
["content"]=>
string(6) "value3"
["id"]=>
string(3) "132"
["lft"]=>
string(1) "7"
["rgt"]=>
string(1) "8"
["depth"]=>
string(1) "2"
}
[5]=>
array(8) {
["title"]=>
string(4) "item"
["type"]=>
string(3) "url"
["class_name"]=>
string(0) ""
["content"]=>
string(6) "value1"
["id"]=>
string(3) "133"
["lft"]=>
string(2) "11"
["rgt"]=>
string(2) "12"
["depth"]=>
string(1) "0"
}
}
json example:
[{"name":"Cat 1","value":"value1","children":[{"name":"sub 2", "value":"value2","children":[{"name":"sub 3", "value":"value 3"}]}]}, {"name":"Cat 2","value":"value 2","children":[{"name":"sub 1", "value":"value1"}]},{"name":"item","value":"value1"}]
can someone help me create a function to do the Convert?
json_encode should be the answer here http://php.net/manual/en/function.json-encode.php

I'm newbie and Need help, with php array call. I do use var_dump and show this

first I'm looking help from any expert here for PHP array calling. I try using var_dump but still I can't call my data. I'm really a beginner and need a lot of help. Thanks before for read my question below...
<?php var_dump($this->product->customfieldsSorted); ?>
I use that and get this array list...
array(1) {
["normal"]=>
array(1) {
[0]=>
object(stdClass)#222 (36) {
["virtuemart_custom_id"]=>
string(2) "21"
["custom_parent_id"]=>
string(1) "0"
["virtuemart_vendor_id"]=>
string(1) "1"
["custom_jplugin_id"]=>
string(1) "0"
["custom_element"]=>
string(0) ""
["admin_only"]=>
string(1) "0"
["custom_title"]=>
string(5) "Slide"
["show_title"]=>
string(1) "0"
["custom_tip"]=>
string(0) ""
["custom_value"]=>
string(0) ""
["custom_desc"]=>
string(0) ""
["field_type"]=>
string(1) "M"
["is_list"]=>
string(1) "0"
["is_hidden"]=>
string(1) "1"
["is_cart_attribute"]=>
string(1) "0"
["is_input"]=>
string(1) "0"
["layout_pos"]=>
string(0) ""
["custom_params"]=>
string(26) "width="1024"|height="400"|"
["shared"]=>
string(1) "0"
["published"]=>
string(1) "1"
["ordering"]=>
string(1) "0"
["virtuemart_customfield_id"]=>
string(3) "110"
["virtuemart_product_id"]=>
string(2) "95"
["customfield_value"]=>
string(2) "15"
["customfield_price"]=>
NULL
["customfield_params"]=>
string(25) "width="200"|height="200"|"
["fpublished"]=>
string(1) "0"
["override"]=>
string(1) "0"
["disabler"]=>
string(1) "0"
["_varsToPushParamCustom"]=>
array(2) {
["width"]=>
array(2) {
[0]=>
string(3) "200"
[1]=>
string(6) "string"
}
["height"]=>
array(2) {
[0]=>
string(3) "200"
[1]=>
string(6) "string"
}
}
["_varsToPushParamCustomField"]=>
array(2) {
["width"]=>
array(2) {
[0]=>
string(3) "200"
[1]=>
string(6) "string"
}
["height"]=>
array(2) {
[0]=>
string(3) "200"
[1]=>
string(6) "string"
}
}
["_varsToPushParam"]=>
array(2) {
["width"]=>
array(2) {
[0]=>
string(3) "200"
[1]=>
string(6) "string"
}
["height"]=>
array(2) {
[0]=>
string(3) "200"
[1]=>
string(6) "string"
}
}
["width"]=>
string(3) "200"
["height"]=>
string(3) "200"
["_xParams"]=>
string(18) "customfield_params"
["display"]=>
string(101) "<img src="/angga/images/stories/virtuemart/product/resized/marinecap_200x200.jpg" alt="marinecap" />"
}
}
Nah I want to get the:
["display"]=>
string(101) "<img src="/angga/images/stories/virtuemart/product/resized/marinecap_200x200.jpg" alt="marinecap" />"
using this:
<?php echo $this->product->customfieldsSorted->display;?>
and got nothing. Can anyone help? I have no clue. None at all. Thanks before :)
$this->product->customfieldsSorted is an array with the key "normal", you can get corresponding value: $this->product->customfieldsSorted['normal'].
$this->product->customfieldsSorted['normal'] is an array with the key 0, get its value: $this->product->customfieldsSorted['normal'][0].
$this->product->customfieldsSorted['normal'][0] is an object of stdClass, you can get value of the property display using $this->product->customfieldsSorted['normal'][0]->display.

Reading PHP array

I thought to access the value of '1' here, I would need to the following
$data['category'][0];
["category"]=> array(1) { [0]=> string(1) "1" }
But it doesn't return anything. How would I access the string(1) section to get the value 1?
Here is the full var dump of the variable $data array
array(18) { ["RET"]=> string(65) "/account/add-submission" ["URI"]=> string(22) "account/add-submission" ["XID"]=> string(40) "3ee1766dfdbe4684831021c99a9197beaede03be" ["return_url"]=> string(36) "account/submission-complete/ENTRY_ID" ["channel_id"]=> string(1) "4" ["entry_id"]=> string(1) "0" ["ACT"]=> string(1) "4" ["meta"]=> string(556) "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" ["return"]=> string(36) "account/submission-complete/ENTRY_ID" ["site_id"]=> string(1) "1" ["submission_file_hidden_file"]=> string(0) "" ["submission_file_hidden_dir"]=> string(1) "1" ["type"]=> string(3) "1.1" ["snap_FxlgTgCET"]=> string(13) "vyHdSjitmEUoV" ["submission_file"]=> string(37) "{filedir_1}Tharp_BIO_Pic300x20038.jpg" ["field_id_48"]=> string(37) "{filedir_1}Tharp_BIO_Pic300x20038.jpg" ["field_ft_48"]=> string(4) "none" ["revision_post"]=> array(26) { ["RET"]=> string(65) "/account/add-submission" ["URI"]=> string(22) "account/add-submission" ["XID"]=> string(40) "3ee1766dfdbe4684831021c99a9197beaede03be" ["return_url"]=> string(36) "account/submission-complete/ENTRY_ID" ["author_id"]=> string(1) "1" ["channel_id"]=> string(1) "4" ["entry_id"]=> string(1) "0" ["ACT"]=> string(1) "4" ["meta"]=> string(556) "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" ["return"]=> string(36) "account/submission-complete/ENTRY_ID" ["site_id"]=> string(1) "1" ["title"]=> string(3) "asd" ["submission_file_hidden_file"]=> string(0) "" ["submission_file_hidden_dir"]=> string(1) "1" ["type"]=> string(3) "1.1" ["category"]=> array(1) { [0]=> string(1) "1" } ["snap_FxlgTgCET"]=> string(13) "vyHdSjitmEUoV" ["submission_file"]=> string(24) "Tharp_BIO_Pic300x200.jpg" ["field_id_48_hidden_file"]=> string(0) "" ["field_id_48_hidden_dir"]=> string(1) "1" ["field_id_48"]=> string(24) "Tharp_BIO_Pic300x200.jpg" ["field_ft_48"]=> string(4) "none" ["allow_comments"]=> string(1) "y" ["entry_date"]=> string(10) "1380114180" ["status"]=> string(4) "open" ["previous_status"]=> bool(false) } }
To access that data you have to use $data['revision_post']['category'][0] because category array is in revision_post array.
The value of $data['category'][0] is an array. So you would access like this:
$data['category'][0] = array('1');
echo $data['category'][0][0];
Try it for yourself by copying and pasting here http://writecodeonline.com/php/

PHP current() returns false when passing a valid array to it

i have an array with size=1 and when i try to get the current array its returns false but the array has values.
$article=getArticle($id);
if(is_array($article))
{ $article=current($article); }
the getArticle returns multidimensional array and when var_dump before current i can see the array.
If var_dump after current i get false.
if i use the code above (because the array size=1)
if(is_array($article))
{
foreach($article as $k=>$v)
{
$article=$v;
}
}
It works without any problem
Whats wrong with current?
Please help
===============EDIT========================
This is the var_dump before current
I have remove the content and summary because are large texts
array(1) {
[529]=>
array(14) {
["articles_id"]=>
string(3) "529"
["issue"]=>
string(3) "161"
["membership_type"]=>
string(1) "1"
["el"]=>
array(9) {
["title"]=>
string(23) "AUTOBIANCHI A112 ABARTH"
["url"]=>
string(23) "autobianchi-a112-abarth"
["summary"]=>
string(397) " i have remove it
"
["content"]=>
string(11580) " i have remove it too large
"
["meta_keywords"]=>
string(23) "AUTOBIANCHI,A112,ABARTH"
["meta_description"]=>
string(402) " "
["created"]=>
string(10) "1362076380"
["last_updated"]=>
string(1) "0"
["status"]=>
string(1) "1"
}
["categories_id"]=>
string(2) "12"
["authors_id"]=>
string(2) "16"
["brands_id"]=>
string(2) "36"
["models_id"]=>
string(3) "206"
["engines_id"]=>
string(3) "174"
["o-categories"]=>
array(1) {
["values"]=>
array(1) {
[12]=>
array(15) {
["categories_id"]=>
string(2) "12"
["object_id"]=>
string(1) "1"
["parent_id"]=>
string(1) "0"
["path"]=>
string(2) "12"
["handler"]=>
string(0) ""
["icon"]=>
string(0) ""
["tpl"]=>
string(12) "articles.php"
["alias"]=>
string(1) "0"
["is_nav"]=>
string(1) "1"
["pos"]=>
string(2) "10"
["depth"]=>
string(1) "0"
["cts"]=>
string(0) ""
["mts"]=>
string(0) ""
["configuration"]=>
string(0) ""
["el"]=>
array(15) {
["categories_id"]=>
string(2) "12"
["lang"]=>
string(2) "el"
["category_name"]=>
string(13) "Classic"
["sub_title"]=>
string(0) ""
["summary"]=>
string(0) ""
["image"]=>
string(0) ""
["html_code"]=>
string(0) ""
["meta_title"]=>
string(0) ""
["url"]=>
string(13) "classic"
["url_path"]=>
string(13) "classic"
["meta_keywords"]=>
string(0) ""
["meta_description"]=>
string(0) ""
["created"]=>
string(10) "1355235888"
["last_updated"]=>
string(1) "0"
["status"]=>
string(1) "1"
}
}
}
}
["o-authors"]=>
array(1) {
["values"]=>
array(1) {
[16]=>
array(4) {
["authors_id"]=>
string(2) "16"
["object_id"]=>
string(2) "26"
["image"]=>
string(0) ""
["el"]=>
array(9) {
["authors_id"]=>
string(2) "16"
["lang"]=>
string(2) "el"
["name"]=>
string(31) "Last First"
["last_name"]=>
string(10) "Last"
["first_name"]=>
string(20) "First"
["nick_name"]=>
string(0) ""
["created"]=>
string(10) "1360567827"
["last_updated"]=>
string(1) "0"
["status"]=>
string(1) "1"
}
}
}
}
["o-brands"]=>
array(1) {
["values"]=>
array(1) {
[36]=>
array(6) {
["brands_id"]=>
string(2) "36"
["object_id"]=>
string(2) "17"
["brand_name"]=>
string(11) "AUTOBIANCHI"
["created"]=>
string(10) "1363179463"
["last_updated"]=>
string(1) "0"
["status"]=>
string(1) "1"
}
}
}
["o-models"]=>
array(1) {
["values"]=>
array(1) {
[206]=>
array(7) {
["models_id"]=>
string(3) "206"
["object_id"]=>
string(2) "18"
["brands_id"]=>
string(2) "36"
["model_name"]=>
string(11) "A112 ABARTH"
["created"]=>
string(10) "1363179480"
["last_updated"]=>
string(1) "0"
["status"]=>
string(1) "1"
}
}
}
["o-engines"]=>
array(1) {
["values"]=>
array(1) {
[174]=>
array(6) {
["engines_id"]=>
string(3) "174"
["object_id"]=>
string(2) "19"
["engine"]=>
string(5) "1.050"
["created"]=>
string(10) "1363179448"
["last_updated"]=>
string(1) "0"
["status"]=>
string(1) "1"
}
}
}
}
}
Can you try
$article=getArticle($id);
if (is_array($article)) {
$article = reset($article);
}
or
$article=getArticle($id);
if (is_array($article)) {
$article = array_shift($article);
}
You can look into the documentation about reset and the documentation about array_shift.
If you copy array in getArticle() function then its internal pointer is lost.
I think this is the reason, it returns false.

print PHP value in an array

Hello I am trying to print a specific value from an array of objects. I am trying to get a value from an array name $allPhotos with a object's property of "nme"'s value.
This is what im trying:
echo $allPhotos[0]["nme"];
this is what the array looks like:
var_dump($allPhotos);
array(2) {
[0]=> object(Photo)#1 (10) {
["product"]=> array(5) {
["PKG1"]=> string(4) "6500"
["PKG2"]=> string(4) "9500"
["8x10"]=> string(4) "1500"
["5x7"]=> string(3) "750"
["4x6"]=> string(3) "300"
}
["price"]=> NULL ["sku"]=> string(1) "1"
["nme"]=> string(5) "test1"
["dir"]=> string(51) "http://"
["status"]=> string(1) "1" ["gallery"]=> string(16) "Church Directory"
["galleryCover"]=> string(1) "0"
["family"]=> string(0) ""
["familyCover"]=> string(0) ""
}
[1]=> object(Photo)#2 (10) {
["product"]=> array(5) {
["PKG1"]=> string(4) "6500"
["PKG2"]=> string(4) "9500"
["8x10"]=> string(4) "1500"
["5x7"]=> string(3) "750"
["4x6"]=> string(3) "300"
}
["price"]=> NULL
["sku"]=> string(1) "2"
["nme"]=> string(5) "test2"
["dir"]=> string(51) "http://"
["status"]=> string(1) "1"
["gallery"]=> string(16) "Church Directory"
["galleryCover"]=> string(1) "0"
["family"]=> string(0) ""
["familyCover"]=> string(0) ""
}
}
Thanks in advance!
I believe echo $allPhotos[0]->nme; should work.

Categories