I have an IIS install (the one that comes with windows server 2016) with a working PHP 7.2 install.
I downloaded the php_mongodb.dll from here http://pecl.php.net/package/mongodb/1.5.2/windows (I grabbed the 7.2 x64 'thread safe' version -- matter?)
I copied the dll into the php extensions folder: C:\Program Files\PHP\v7.2\ext
I then added extension=php_mongodb.dll to the php.ini file located at C:\Program Files\PHP\v7.2\
I then restarted IIS (well, the entire system)
I can then run a phpinfo() and the results do not included the word "mongo".
I also try running print_r(get_loaded_extensions()); and the results do not include the word 'mongo'.
I further try running some of the options here:
http://php.net/manual/en/mongo.tutorial.connecting.php and recieve server errors in the browser.
... so, how can I get a php->mongodb connection?
(alternately, what I'm ultimately trying to do is connect a javascript SPA to a mongodb back end... are there other options than going through a php intermediary? -- it's an internal app, so security isn't the fearsome beast it would normally be)
Turns out the exact version of the dll you download matters. I needed the x86 non-thread-safe version for some reason.
Still can't get a connection, but at least it's in the list of loaded extensions.
try out all the possible files. atleast one may work i downloaded like 15 or 16 for my wamp 64 bit none worked.then i tried 7 versions in iis and finallly one worked. php version,build,archetecture all matters.
I am facing some issue while starting Apache server via XAMPP. I have installed XAMPP Version 5.6.3.
When I start the Apache server from xampp control panel, an error message is displayed as shown below:
On clicking 'OK' button, another dialog box is displayed as shown:
The thing is I wanted to use OCI instead of mysql. so I have commented out the mysql extensions and uncommented the OCI extension in php.ini file.
The php_oci8_12c.dll file is the only file available in the extensions (ext) folder of php in xampp. Hence I included the line in the php.ini as shown in the above image.
Since then I am getting this error.
I have installed instant client 12.1 as well but no luck. I also tried copying the OCI.dll from instantclient_12_1 and pasting it in c:/xampp/php and c:/xampp/apache/bin. The error still persists.
Need help..
UPDATE: I removed other oracle paths in PATH of environment variables, keeping only the instantclient path. Now I am getting this error..
Well, I've installed XAMPP 1.8.2, PHP 5.4 and Apache 2.0, and I use php_oci8_11g.dll and works fine.
You are trying use php_oci8_12g.dll, I recommend you read this link http://www.oracle.com/technetwork/articles/dsl/technote-php-instant-12c-2088811.html with especifications for run oci12g.
I solved the issue after stuck 2-3 days .
Before follow steps Some things to remmember .
1- I am using win 8.1 64 bit .
2- Using Xampp 5.6.31 32 bit .
3- Using instaclient 12.2.0.1 64 bit (Because my win 8.1 is 64 Bit ) .
Now steps are below -
Step 1 - Download xampp 5.6.31 32 bit and install it .
Step 2 - Download and install oracle 11g R2
Step 3 - Download and install OTN (oracle instaclient 12.2.0.1 )
Extract all files in any drive in my case i have extract in C:\oracle\instaclient12.2.0.1
Add (C:\oracle\instaclient12.2.0.1 ) it to the path variables of the system. and also add new variable under variable of system with name TNS_ADMIN and put same path (C:\oracle\instaclient12.2.0.1 ) in its value .
Its time to set PHP.INI here uncomment following (see image below)
PHP.ini setup
Copy 3 files from C:\oracle\instaclient12.2.0.1 oci.dll,oraociei12.dll and oraons.dll to xampp apache\bin . by this step Unable to load dynamic library issue has been resolved .
Unable to load dynamic library issue solution
Now restart Apache on xampp and check info.php on browser . OCI8 module will appear there enable .
Enjoy !!!.
I solved the issue. The problem was that I was trying to use a 64 bit DLL(php_oci8_12g.dll) in a 32 bit PHP. I downloaded a 32 bit instantClient and it works now! :-)
instantclient-basic-nt-12.1.0.2.0.zip
I had a problem related to OCI8 and XAMPP for days in a row, the problem was shown as:
Fatal error: Call to undefined function oci_connect()
I was able to correct it using the php that comes by default with XAMPP. I'm using windows 10 64 bits as well, but used xampp-win32-7.3.2-0-VC15 (php 7.3.2). To summarize, I was able to get a correct configuration by doing everything with 32 bits versions (except the o.s). The full story and how I've done it:
If you go to your xampp/php directory through cmd, in my case it was "C:\xampp\php", and start the php by the simple command "php" it will probably show what dlls are not being found in the etc folder or which of those are not Win 32 compatible. If you get this problem, you will not be able to see the OCI8 page when opening a phpinfo() page:
If that's the case, with win 32 compatibility problems or not finding the dlls that you are certain are there, you should unistall XAMPP and reinstall it using a x32 version. The phpinfo page will show x86 Architecture. Remember to remove in the path variables any source that miss locate your php in use, the point here is to use the one given by default in XAMPP. If you need by any reason to use another php installation, remember to use x86 architecture.
If you need an updated OCI8 dll you can download it on https://pecl.php.net/package/oci8 , but remember to check the Thread Safety compatibility, you can find it on your phpinfo page as well. In my case it was enough to use the one provided by XAMPP.
After this, you have to enable the extension:
extension=oci8_12c
in the php.ini configuration file. It was enough for me to enable only this one, although some people suggests to also enable extension=pdo_oci. My suggestion is to try this only if you failed to install with the path here shown. It's also good to check if you are set in the correct path regarding the extensions, in my case:
extension_dir="C:\xampp\php\ext"
After this, you have to download the Oracle Instant Client. Since you are using x86 architecture (you must use this one), you need to find a 32-bit version of the OIC, but is also important to check which one is compatible with the extension you uncommented. In my case, of oci8_12c, it was instantclient-basic-nt-12.2.
The final step is to unzip it to a folder, like "C:\instantclient_12_2" and add it to the path variables of the system.
Reload apache and check if the OCI8 is shown correcly.
I am trying to make PHP5 work over IIS 6.0 on Windows server 2003 and i am following this steps:
http://www.iisadmin.co.uk/?p=4
The thing is, there's no file named "php5isapi.dll" inside the php folder, so I am using php5isapi.dll instead. Is it correct? Or should I try to download the php5isapi.dll from somewhere.
Well, then, I keep following the steps and when I try to execute my php file, I get this message:
The specified procedure could not be found.
What am I doing wrong?
Thanks.
UPDATE
I downloaded php5isapi.dll and tried to make it work with it but i am getting this error:
The specified module could not be found.
Also, after any change, i restart the Default Web Site clicking on stop and play.
UPDATE 2
Now, after rebooting, when trying to access the PHP file, the browser shows a 500 error:
The page cannot be displayed
I noticed that "php5isapi.ll" is no longer available for the last versions of PHP as pointed in here:
Why is php5isapi.dll missing after installing PHP for Windows?
Therefor, what i did was following this tutorial in order to do it with FastCGI
http://www.iis.net/learn/application-frameworks/install-and-configure-php-applications-on-iis/using-fastcgi-to-host-php-applications-on-iis-60
I found it on this comment:
Why is php5isapi.dll missing after installing PHP for Windows?
After restarting the server, it finally worked.
I originally thought this error had to do with my path setup - I had
separated the core from the app so I could work more easily with git
submodules, so I ignored it. I just did a fresh checkout from the git
repo / a download of the RC2 source / and a cakeinit install of the
2.0 package (also uses git) and all 3 installs have the same issue I
had before.
My code seems to work fine via the browser.
The output of a ./cake bake Model from inside the local copy of the
core in the lib/Cake/Console folder is here
https://gist.github.com/1233884
This totally prevents me from using bake. Baking a project doesn't
work, baking a new database config doesn't work - it also doesn't
matter which of the datasources I try.
Can someone point me in the right direction here? I want to use some
of the bake tools and work on converting some shells for 2.0.
I am using XAMPP (latest version for OS X - I reinstalled it 20
minutes ago as a last ditch attempt)
OSX 10.5.8
The database.php I am working with is here with the passwords removed
but otherwise working
https://gist.github.com/1233891
I have tested it with and without the unix_socket setting and encoding
settings. All works fine from the browser but again not via the cli.
Okay, the error message could have been be a little bit more specific:
Error: Database connection "Mysql" is missing, or could not be created.
DboSource::__construct() is throwing that error here because Mysql::enabled() returns false:
public function enabled() {
return in_array('mysql', PDO::getAvailableDrivers());
}
On Windows, I can reproduce your error by commenting out the following line from my PHP CLI's php.ini file (the one that running php --ini on the command-line returns):
extension=php_pdo_mysql_libmysql.dll
HTH.
I was MAMP on Mac and had the same problem with CakePHP 2.2. I solved the problem by installing the mysql pdo for my mac ports installation. sudo port install php5-mysql
For local testing, I have found that setting the host to the address works. In my config I use the following:
'host' => '127.0.0.1',
This works for Mamp Pro
WAMP installed fine, no problems, BUT...
When going to phpMyAdmin, I get the error from phpMyAdmin as follows:
Cannot load mysqli extension. Please check your PHP configuration
Also, phpMyAdmin documentation explains this error message as follows:
To connect to a MySQL server, PHP needs a set of MySQL functions
called "MySQL extension". This extension may be part of the PHP
distribution (compiled-in), otherwise it needs to be loaded
dynamically. Its name is probably mysql.so or php_mysql.dll.
phpMyAdmin tried to load the extension but failed. Usually, the
problem is solved by installing a software package called "PHP-MySQL"
or something similar.
Finally, the apache_error.log file has the following PHP warnings (see the mySQL warning):
PHP Warning: Zend Optimizer does not support this version of PHP - please upgrade to the latest version of Zend Optimizer in Unknown on line 0
PHP Warning: Zend Platform does not support this version of PHP - please upgrade to the latest version of Zend Platform in Unknown on line 0
PHP Warning: Zend Debug Server does not support this version of PHP - please upgrade to the latest version of Zend Debug Server in Unknown on line 0
PHP Warning: gd wrapper does not support this version of PHP - please upgrade to the latest version of gd wrapper in Unknown on line 0
PHP Warning: java wrapper does not support this version of PHP - please upgrade to the latest version of java wrapper in Unknown on line 0
PHP Warning: mysql wrapper does not support this version of PHP - please upgrade to the latest version of mysql wrapper in Unknown on line 0
So, for some reason PHP is not recognizing the mysql extension.
Anyone know why? Any solution or workaround?
I deleted the PHP in program files ad everything started working , the problem that there two installations of pHp
I tried many solutions, and none worked for me. I tried the following solutions:
Restart wampserver
Reinstall wampserver
restart machine
and all other solutions mentioned in this question.
However, none of these worked. Then I found that my PHPMyAdmin was not working in chrome and was working in firefox. So I tried clearing cache, restarting browser etc, but still it would not work.
Then I deleted all the files from C:\wamp\tmp and then tried again, and it works. I am not sure why it works, but here is what I think. The session was cached and not getting cleared. So as soon as I deleted all files in this directory all the sessions were deleted and hence it worked fine.
First, make sure that the php.ini file is loading the mysqli extension.
If you are using WAMPServer, click on the icon in the system tray, go to PHP -> PHP Extensions and make sure it is checked. If not, go into the php.ini file and make sure that the line: extension=php_mysqli.dll is uncommented (eg, remove the ; if it exists). If that line does not exist, add it.
If this still does not work, double check that the right php.ini file is being loaded.
To do so, view your phpinfo() (Here for WAMPServer). Scroll down to the Loaded Configuration File row and see which php.ini is being loaded.Make sure it is the right file. If you're using WAMPServer, it should be(WAMP INSTALL FOLDER)\bin\apache\Apache2.2.11\bin\php.ini. By default, it isC:\wamp\bin\apache\Apache2.2.11\bin\php.ini`.
If a different php.ini file is being loaded, just rename it to something else so that PHP will try and find the file somewhere else. There should be a way to specify which on eyou want to use, but I forget exactly how to do that...
If this still doesn't work... Try messing around with phpMyAdmin's settings, or using another answer, but I'm afraid I can't help beyond this.
I was running WAMP with two PHP versions 1) 5.2.9 and 2) 5.2.13.
As per site requirement i needed to change PHP version to 5.2.9 from 5.2.13. after swapping PHP version, error was "mysqli extension is missing". after debugging long time i get to know it was due to wrong "extension_dir" path in php.ini file.
So i changed its value:
Old: "extension_dir" c:/wamp/bin/php/php5.2.13/ext/
New: "extension_dir" c:/wamp/bin/php/php5.2.9/ext/
Restarted All services in wamp server, then it's fixed.
I had the same problem. I had WAMP server installed. All was working fine. Then one day I restarted my computer and it just stopped working! I tried desperately going through all help posts and doing them but nothing worked.
What they usually suggest you do is, first go to your php.ini file and make sure your 'extension_dir' is properly set. Then to make sure these two lines are not commented (remove the ; infront):
extension=php_mysql.dll
extension=php_mysqli.dll
Then some suggested that I download fresh copies of these two files but none worked. I also tried uninstalling everything (php/mysql/apache) and reinstalled fresh copies of WAMP server several times but with no luck.
Finally I managed to find an alternative solution. I switched to 'easyphp' (http://www.easyphp.org/). This is something very similar to WAMP. First I made backups of my sql databases so I can reload them on the new installation.
Then I installed 'easyphp' and everything seems to work fine. I reloaded my sql databases from my backup and now things are back to normal.
I hope someone suffering from a similar prob. will find this useful. If someone has really found a fix to make WAMP server work. Pls do be kind enough to post it here so many will benefit.
in wampserver go to php.ini. open the file and uncomment extension=msql.dll by removing semicolon(;) for respective operating sytem.
Just add in your php.ini:
[PHP_MCRYPT]
extension=php_mcrypt.dll
[PHP_MYSQL]
extension=php_mysql.dll
[PHP_MYSQLI]
extension=php_mysqli.dll
Also setup the mysql password:
SET PASSWORD FOR root#localhost=PASSWORD('your_password');
And the phpmyadmin mysql password in config.inc.php:
$cfg['Servers'][$i]['password'] = 'your_password';
Had the same problem, with wamp. Try to exchange your current version of php.ini with a backup. There is one in: wamp\bin\php\php5.3.0phpForApache.txt. Worked for me.
Just wanted to chime in on this one. Using Wamp Server 2.0, and using Zend Studio with Zend debugger for development.
I wasn't able as of yet (will get back to it at some point) to get the zend debugger working with php 5.3. So in wamp I loaded an earlier php version, 5.2.11. I was getting the same error when acessing php my admin.
What I had to do was change the php.ini file value for "extension_dir" to c:/wamp/bin/php/php5.2.11/ext/ to match the version of php I was using. After that it was all good.
I had this problem and spent 2 hours trying all the solutions online, none worked.
Tried this, and it woked:
Change
mysql.default_host =
to
mysql.default_host = localhost
and restart WAMP. pay attention if you are using mysqli or not.
I had the same error. When I increased the script memory size and enabled E_ALL then restarted the server, I got that error in phpmyadmin. All I had to do to fix it was restart my computer!
I got this problem for a long time. Tried all I've read on forums and this finally worked for me:
Open your php.ini (I assume you've got the good one that is loaded...) and find this line
mysqli.default_port = 3306
change for
mysqli.default_port = 80
Restart all services
Go to localhost/phpmyadmin -> won't work
Reopen the php.ini file and retype this
mysqli.default_port = 3306
Restart all services
Worked for me.
For me worked this, after searching all logs/internet/every non-normal things.
You have to register dl by:
Through application:
WAMP -> PHP settings -> enable dl
or
# php.ini #
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = On
I have just installed WampServer, and faced same problem. I have found solution, that works for me, it is ridiculously simple.
Disable PHP extension php_mysqli.
Restart WampServer, visit local phpmyadmin.
Enable php_mysqli back.
Repeat step 2.
After few page refreshes, remaining errors plates (about MySQL and sqli) had gone.
i tried hard by
installing the wamp again and again,
by checking the php.ini file,
by restarting the machine,
by replacing the index.php file,
but none works.
then i go to the wamp/temp and deleted all files and it works fine now.
I had path variable in windows set to some random version of php.
The fix was to update it and set it to the folder within my wampserver installation:
C:\wamp64\bin\php\php5.6.38
Then I realized this is wrong also for my specific case, and I should actually be running the script from within vagrant. Live and learn.
I had this issue because of a different reason:
Check the PHP Error Log(Get from the Wamp Tray -> PHP -> PHP Error Log.
I had a syntax error in the php.ini file while I was editing the file.
Check the log and clear the error. This will open your PhpMyAdmin properly.
Check your phpForApache.ini file's extensions. This file should be same as your php.ini file.