phpgmailer stopped working suddenly - php

I used phpgmailer to send emails and it was working smoothly. Today I tested my project and it's not working now.
<?php
require_once('class.phpgmailer.php');
$mail = new PHPGMailer();
$mail->Username = 'username#gmail.com';
$mail->Password = '********';
$mail->From = 'username#gmail.com';
$mail->FromName = "<blah>";
$mail->Subject = 'something';
$mail->AddAddress('xyz#gmail.com');
$mail->Body = "Hello Sir"."\n"."
Your Password is : ."."";
$mail->Host = 'smtp.gmail.com';
$mail->Port = 465;
$mail->Send();
if(!$mail->Send())
{
echo 'Message could not be sent.' ;
echo 'Mailer Error: ' . $mail->ErrorInfo;
exit;
}
echo 'Message has been sent';

I suggest you download PHPMailer and try this code:
require("phpmailer/class.phpmailer.php");
$mail = new PHPMailer();
$mail->IsSMTP();
$mail->SMTPAuth = true;
$mail->Host = "ssl://smtp.gmail.com";
$mail->Port = 465;
$mail->Username = "from#gmail.com";
$mail->Password = "****";
$mail->FromName = "Sender name";
$mail->Subject = "test";
$mail->Body = "Test body";
$mail->AddAddress('sender#mail.com');
if(!$mail->Send()){
echo "Mailer Error: " . $mail->ErrorInfo;
}else{
echo "Message has been sent";
}

#goose is right, remove the first $mail->Send() and leave the one in the if statement. If the From address is the same as the username email, then you don't need that either as it will take it from your gmail account.
Try that and see if it works.
EDIT: try adding the following;
$mail->IsSMTP(); // enable SMTP
$mail->SMTPDebug = 0; // debugging: 1 = errors and messages, 2 = messages only
$mail->SMTPAuth = true; // authentication enabled
$mail->SMTPSecure = 'ssl'; // secure transfer enabled REQUIRED for GMail
$mail->Host = 'smtp.gmail.com';
$mail->Port = 465;
$mail->Username = 'email#gmail.com';
$mail->Password = 'password';
Try that and if there are errors, then it should give you more detail.
EDIT2: If that doesn't work then I suggest trying PHPMailer instead of PHPGmailer - and follow the tutorial here: http://www.web-development-blog.com/archives/send-e-mail-messages-via-smtp-with-phpmailer-and-gmail/

Please, make sure:
$mail->Username is equal to $mail->From, and is correct
$mail->Password is correct
$mail->FromName does not contain "<" and ">" characters; just try $mail->FromName = 'Test';

Related

PHPmailer script runs without problems but doesn't send anything

I have a really simple PHP code for sending emails. The page is loading without any errors but it doesn't seem to do anything.
also, I am new to PHP and I don't really know how to debug this stuff.
I'll really appreciate a little help (: thank you!
<?php
require_once('PHPMailer/PHPMailerAutoload.php');
$mail = new PHPMailer();
$mail->isSMTP();
$mail->SMTPAuth = true;
$mail->SMTPSecure ='ssl';
$mail->Host = 'smtp.gmail.com';
$mail->port = '456';
$mail->isHtml();
$mail->Username = 'lagofbot#gmail.com';
$mail->Password = 'lago9876543s';
$mail->Subject = 'Hello';
$mail->Body = "test";
$mail->From = 'no-replay';
$mail->FromName = 'no-replay';
$mail->AddAddress('mrxvr123#gmail.com');
$mail->send();
?>
change your code like this and see if it will show you any errors
$mail = new PHPMailer();
try {
$mail->isSMTP();
$mail->SMTPAuth = true;
$mail->SMTPSecure ='ssl';
$mail->Host = 'smtp.gmail.com';
$mail->port = '456';
$mail->isHtml();
$mail->Username = 'lagofbot#gmail.com';
$mail->Password = 'lagofbot258258#258258';
$mail->Subject = 'Hello';
$mail->Body = "test";
$mail->From = 'no-replay';
$mail->FromName = 'no-replay';
$mail->AddAddress('mrxvr123#gmail.com');
$mail->send();
} catch (Exception $e) {
echo "Message could not be sent. Mailer Error: {$mail->ErrorInfo}";
Try with this
require __DIR__.'../phpmailer/src/PHPMailer.php'; //configure according your files
require __DIR__."./phpmailer/src/Exception.php";
require __DIR__."../phpmailer/src/SMTP.php";
$mail = new \PHPMailer\PHPMailer\PHPMailer(); // create a new object
$mail->isSMTP(); // enable SMTP
$mail->SMTPDebug = 2; // debugging: 1 = errors and messages, 2 = messages only
$mail->SMTPAuth = true; // authentication enabled
$mail->SMTPSecure = 'ssl'; // secure transfer enabled REQUIRED for Gmail
$mail->Host = "smtp.gmail.com";
$mail->Port = 465; // or 587
$mail->Username = ""; //GMAIL ACCOUNT EMAIL ID
$mail->Password = ""; // GMAIL ACCOUNT PASSWORD
$mail->SetFrom("",''); // FROM THIS MAIL ID & SET AS DEFINE IN SECOND PARAMETER
$mail->addAddress($email); // `TO` FIELD IN MAIL
$mail->IsHTML(true);
if (!$mail->Send()) {
return true;
} else {
return false;
}
And don't forget to enable less secure apps if you use gmail.
Hope this helps :)

phpmailer on windows IIS

I am trying to configure PHPMailer in order to have it working ona Windows IIS server using php scripts.
The application I have is written in PHP so we expected we could easily use PHPMailer to send emails.
Well, that doesn't work.
We have tried configuring it as SMTP, but we still get error in configuration.
Here it is our script:
date_default_timezone_set('Etc/UTC');
$mail = new PHPMailer;
$mail->isSMTP();
$mail->SMTPDebug = 1;
//$mail->Debugoutput = 'html';
$mail->Host = 'smtp.gmail.com';
$mail->Port = 587;
$mail->SMTPSecure = 'tls';
$mail->SMTPAuth = true;
$mail->Username = "account#gmail.com";
$mail->Password = "gmailPWD";
$mail->setFrom('info#website.com', 'The Website');
$mail->addAddress($to, '');
$mail->Subject = $subject;
$mail->msgHTML($message);
if (!$mail->send()) {
$errors = "Errori Mailer: " . $mail->ErrorInfo;
} else {
$errors = "<h5>Sent!</h5>";
}
Any clue? How can that be used on windows server?
Thank you
EDIT
So, it was a problem of Gmail and its security settings. I followed this post: https://stackoverflow.com/a/25175234/1873501 and everything went smooth!
I just wanted to share it.
You've downloaded and extracted the class I am assuming. Maybe you're not autoloading? Make sure you include:
require '/path/to/PHPMailerAutoload.php';
It should be fine on IIS/Windows Server. See some of the examples here in the documentation (and in the examples folder): https://github.com/PHPMailer/PHPMailer
Also, if you are getting any errors make sure you list them so we know how to help you further.
function sendMail($request) {
require 'PHPMailerAutoload.php';
$mail = new PHPMailer;
$mail->SMTPDebug = 4;
$mail->isSMTP();
$mail->Host = 'smtp.gmail.com';
$mail->SMTPAuth = true;
$mail->Username = 'yourmail#gmail.com;
$mail->Password = 'yourgamilPass';
$mail->SMTPSecure = 'tls';
$mail->Port = 587;
$mail->setFrom('yourgmail#gmail.com', 'Title');
$mail->addAddress(emailsendingto#gmail.com);
$mail->addReplyTo('yourgmail#gmail.com');
$mail->isHTML(true);
$mail->Subject = '$the subject of the e-mail';
$mail->Body = 'The body of the email';
$mail->AltBody = 'Alternative'; // this is mostly sent to your own mail
if(!$mail->send()) {
echo 'Message could not be sent.';
echo 'Mailer Error: ' . $mail->ErrorInfo;
} else {
echo 'Message has been sent';
}
}

use phpmailer to send email from localhost to gmail: SMTP connect() failed

i want to send an email from localhost to gmail, but it says "SMTP connect() failed"
here is my code. I've also tried to change configuration php.ini and sendmail.ini but no luck.
Thank you.
$mail = new PHPMailer;
$mail->isSMTP();
$mail->SMTPSecure = 'ssl';
$mail->Host = 'smtp.gmail.com';
$mail->Port = 465;
$mail->SMTPAuth = true;
$mail->Username = 'asd#gmail.com';
$mail->Password = 'password';
$mail->From = 'from#example.com';
$mail->FromName = 'Mailer';
$mail->addAddress('asd#gmail.com');
$mail->WordWrap = 50;
$mail->isHTML(true);
$mail->Subject = 'Email'
$mail->Body = "This is body";
if(!$mail->send()) {
echo 'Message could not be sent.';
echo 'Mailer Error: ' . $mail->ErrorInfo;
} else {
echo 'Message has been sent';
}
Try out the following :
Ensure that the PHPMailer library is included in the code.
Ensure that you are internet connection from localhost is not inhibited by any proxy.
Happy Coding :)
check the line $mail->Subject = 'Email' for a missing ;

php mailer sender form user

i have phpmailer and i can send email via php page without any problem
but the sender automatically by username it i am use in smtp server
i want take sender email from user who write message not from default sender
and this is form code
<?php
require '../../PHPMailer/PHPMailer-master/PHPMailerAutoload.php';
$name = $_POST['name'];
$Institute = $_POST['Institute'];
$email = $_POST['email'];
$message = $_POST['message'];
$mail = new PHPMailer();
$mail->isSMTP();
$mail->CharSet = 'UTF-8';
$mail->Debugoutput = 'html';
//$mail->SMTPDebug = true;
$mail->Host = 'smtp.gmail.com';
$mail->Port = 587;
$mail->SMTPSecure = 'tls';
$mail->SMTPAuth = true;
$mail->Username = "MyGmail";
$mail->Password = "MyGmailPass";
$mail->setFrom('Mygmail', $name);
$mail->addReplyTo('MyGmail', 'First Last');
$mail->addAddress('MyEmail', 'Nasser');
$mail->Subject = 'Database Site Reminder';
$mail->Body = ($message);
$mail->AltBody = 'This is a plain-text message body';
if (!$mail->send()) {
echo "Mailer Error: " . $mail->ErrorInfo;
} else {
echo "Message sent!";
}
?>
i am put `$mail->setFrom('Mygmail', $name); this like
$mail->setFrom($email, $name);
because take sender email from user , and i get Message sent
but message not arrive to my email
i cant find any solution... please assist me
thanks ...
$mail = new PHPMailer();
$body = "Body text goes here";
$mail->IsSMTP(); // telling the class to use SMTP
$mail->Host = "smtp.gmail.com"; // SMTP server
$mail->SMTPDebug = 2; // enables SMTP debug information (for testing)
// 1 = errors and messages
// 2 = messages only
$mail->SMTPAuth = true; // enable SMTP authentication
$mail->SMTPSecure = "tls"; // sets the prefix to the servier
$mail->Host = "smtp.gmail.com"; // sets GMAIL as the SMTP server
$mail->Port = 587; // set the SMTP port for the GMAIL server
$mail->Username = "Gmail Id"; // GMAIL username
$mail->Password = "PaSsWoRd"; // GMAIL password
$mail->SetFrom('fromemail#gmail.com', 'User');
$mail->AddReplyTo("fromemail#gmail.com","User");
$mail->Subject = "Subject Goes Here";
$mail->AltBody = "To view the message, please use an HTML compatible email viewer!"; // optional, comment out and test
$mail->MsgHTML($body);
$mail->AddAddress('toemail#gmail.com', 'User');
if(!$mail->Send()) {
echo "Mailer Error: " . $mail->ErrorInfo;
} else {
echo("Success");
}
try this code... its working....
If you are using PHP Mailer from Github,
then you can set the Sender name by,
$mail->SetFrom("info#mibckerala.org", "MIBC");

PHPMailer is not working at all

I'm trying to configure PHPMailer I've uploaded 1 file which is class.phpmailer.php and created another php file with this content:
<?php
require('class.phpmailer.php');
$mail = new PHPMailer(); // create a new object
$mail->IsSMTP(); // enable SMTP
$mail->SMTPDebug = 1; // debugging: 1 = errors and messages, 2 = messages only
$mail->SMTPAuth = true; // authentication enabled
$mail->SMTPSecure = 'ssl'; // secure transfer enabled REQUIRED for GMail
$mail->Host = "smtp.gmail.com";
$mail->Port = 465; // or 587
$mail->IsHTML(true);
$mail->Username = "myemail#gmail.com";
$mail->Password = "mypassword";
$mail->SetFrom("the same email address");
$mail->Subject = "Test";
$mail->Body = "hello";
$mail->AddAddress("the same email address");
if(!$mail->Send())
{
echo "Mailer Error: " . $mail->ErrorInfo;
}
else
{
echo "Message has been sent";
}
?>
and i get nothing at all not a success message nor a failure message. http://www.mawk3y.net/mailtest/test.php
all answers are outdated now. Most current version (as of Feb 2018) does not have autoload anymore, and PHPMailer should be initialized as follows:
<?php
include_once(FCPATH.'PHPMailer/src/PHPMailer.php');
include_once(FCPATH.'PHPMailer/src/SMTP.php');
include_once(FCPATH.'PHPMailer/src/Exception.php');
$msj="My complete message";
$mail = new PHPMailer\PHPMailer\PHPMailer();
$mail->IsSMTP(); // enable SMTP
$mail->SMTPDebug = 1; // debugging: 1 = errors and messages, 2 = messages only
//authentication SMTP enabled
$mail->SMTPAuth = true;
$mail->SMTPSecure = 'ssl'; // secure transfer enabled REQUIRED for Gmail
$mail->Host = "smtp.gmail.com";
//indico el puerto que usa Gmail 465 or 587
$mail->Port = 465;
$mail->Username = "xxxxxx";
$mail->Password = "xxxx";
$mail->SetFrom("xxxxxx#xxxxx.com","Name");
$mail->AddReplyTo("xxx#xxx.com","Name Replay");
$mail->Subject = "Test";
$mail->MsgHTML($msj);
$mail->AddAddress("xxxxxx#xxxxx.com");
if(!$mail->Send()) {
echo "Mailer Error: " . $mail->ErrorInfo;
} else {
echo "Message has been sent";
}
?>
The problem is with the require method.
You first have to extract all file of phpMailer repository.
instead of writing
require('class.phpmailer.php');
you need to include path where your PHPMailerAutoload.php file extracted.so you can replace it with.
require('path-of-extracted-folder/PHPMailerAutoload.php');
for more reference you can visit it's GitHub link
https://github.com/PHPMailer/PHPMailer
I had same problem but I solved.This is the way I code
<?php
require 'PHPMailer-master/PHPMailerAutoload.php';
//Create a new PHPMailer instance
$mail = new PHPMailer;
// Set PHPMailer to use the sendmail transport
$mail->isSMTP();
$mail->Host = 'smtp.gmail.com'; // Specify main and backup SMTP servers
$mail->SMTPAuth = true; // Enable SMTP authentication
$mail->Username = 'abc#gmail.com'; // SMTP username
$mail->Password = 'abc'; // SMTP password
$mail->SMTPSecure = 'tls'; // Enable TLS encryption, `ssl` also accepted
$mail->Port = 587; // TCP port to connect to
//Set who the message is to be sent from
$mail->setFrom('abc1#gmail.com', 'First Last');
//Set an alternative reply-to address
//Set who the message is to be sent to
$mail->addAddress('abc#gmail.com', 'Shehan');
//Set the subject line
$mail->Subject = 'Test Mail';
$mail->Body = 'This is Test Mail';
//send the message, check for errors
if (!$mail->send()) {
echo "Mailer Error: " . $mail->ErrorInfo;
} else {
echo "Message sent!";
}
?>

Categories