Currently my code is adding a week, but I'm using Days instead of Weeks. I've read the documentation and don't quite understand how it works.
PHP: DateInterval
# Adds 7 days to the project launch date.
$project_launch_date->add(new DateInterval('P7D'));
Instead of adding manual 7 days, how can I specify, 'add a week', or 'add n weeks'?
If DateInterval is unclear for you, you can use more clear modify of DateTime class.
$date = new DateTime();
$date->modify('+1 day');
$date->modify('+5 week');
I prefer to use modify, because it makes code more readable without comments
In case you prefer to use DateInterval, here is good reference: http://www.php.net/manual/en/dateinterval.construct.php
So 5 weeks will be P5W, 3 month will be P3M, 5 weeks AND 3 month P3M5W and so on.
Related
Been trying to figure out just how to add hours, days, weeks and years to a date. Found a few examples that work, but I have NO idea why.
$dt->add(new DateInterval('P1Y')); 'P1M', 'P1D' all add one year, month and day. 'P1H' or 'P1S' throw exceptions.
Been reading all about DateTime class and reading the https://www.php.net/manual/en/dateinterval.format.php page, NO WHERE can I find anything that explains what the 'P' part of that format string is.
Where is some decent documentation on this??? It should not take hours to figure out how to add a few days to a date!!
The P stands for period. If you want to define an interval based on hours or minutes check this example:
$interval = new DateInterval('PT1H');
Here, $interval represents a time interval of 1 hour.
For example, to add an hour to an existing date:
$date = new DateTime();
$date->add($interval);
This question already has answers here:
Convert one date format into another in PHP
(17 answers)
How to calculate the difference between two dates using PHP?
(34 answers)
Timezone conversion in php
(9 answers)
Adding three months to a date in PHP
(11 answers)
Closed 4 years ago.
Everyone has to deal with date/time formatting, time zones, weird time formats, etc. at some point in programming. PHP has few ways to deal with these problems, the most notable of which is PHP's built in DateTime class. This is because the DateTime class acts as an all-in-one solution to all theses problems.
However, the DateTime class has one flaw: it can be confusing to use if you aren't already familiar with it.
This post is to help those people who have want to know more about the DateTime class and/or found themselves asking one of the following questions:
How do I convert a string to a modifiable date/time?
How do I format a date/time string?
How do I get the difference between 2 times?
How do I account for time zones?
Please Note:
This post will not be addressing the usage of date(), time(), strtotime(), or any of their related functions. This post is purely to explain the correct usage of the DateTime and its related classes in PHP. While many of these answers can also be achieved via date() and its related functions, DateTime wraps all of that functionality into a few clean classes; which can make it easier to comprehend as a whole.
Most of the below information can be gotten from various parts of PHP's documentation of the DateTime class. However, this answer is formatted in a way that should answer most people's questions regarding the DateTime class, and should apply to most of its use cases.
If you are trying to do something more advanced with Dates/Times such as creating a DateTime wrapper, using immutable DateTime instances, or something else that's specific to your applications needs I highly suggest you checkout the full Date and Time documentation.
1. How do I convert a string to a modifiable date/time?
One of the hardest things to do in programming is to try and make end-user input usable. However, when it comes to dates and times, the DateTime class makes this practically child's play.
How
DateTime's constructor uses a powerful parser that accepts most widely known formats including relative formats.
$datetime = new DateTime($datetime_string);
From there you can use any of the following methods to modify the time:
$datetime->modify() - Alters the timestamp (works great with relative formats!)
$datetime->add() - Adds an amount of days, months, years, hours, minutes and seconds to a DateTime object
$datetime->sub() - Subtracts an amount of days, months, years, hours, minutes and seconds from a DateTime object
$datetime->setDate() - Sets the date
$datetime->setISODate() - Sets the ISO date
$datetime->setTime() - Sets the time
$datetime->setTimestamp() - Sets the date and time based on an Unix timestamp (great for dealing with absolute times across time zones!)
To see the full list of formats that DateTime::__construct() supports check out: Supported Date and Time Formats.
Example - Interpreting End-User Input
Lets say you have form that allows users to say what day they want to make an appointment, but this input is not a date picker with a forced format, but is instead a plain text input.
A typical end-user will put something like these in that input and a typical programmer will respond in the following ways when asked to support it:
12/31/2000 - "OK"
2000-12-31 - "Sure"
Today - "Um, I guess we could support that?"
Tomorrow - "I guess we should support that too."
wednesday next week - "No."
After a while you either force a specific format (which you should always do anyway) or weep at your poor form design. However, DateTime allows all of these as valid inputs and interprets them flawlessly.
// 2000-12-31 00:00:00.000000
new DateTime('12/31/2000');
// 2000-12-31 00:00:00.000000
new DateTime('2000-12-31');
// 2000-12-31 00:00:00.000000
new DateTime('Today');
// 2001-01-01 00:00:00.000000
new DateTime('Tomorrow');
// 2001-01-03 00:00:00.000000
new DateTime('wednesday next week');
However, like most things the DateTime class is not perfect, and doesn't support every format. Which is why you should always use try ... catch blocks with DateTime and confirm with your end-user that the date you interpreted is what the end-user desired. One great example is European date formats:
try {
new DateTime('31/12/2000');
} catch (Exception $e) {
echo $e->getMessage();
}
Output:
DateTime::__construct(): Failed to parse time string (31/12/2000) at position 0 (3): Unexpected character
Example - Modifying A Date/Time
You can adjust any date/time easily with the $datetime->modify() method:
$datetime = new DateTime('2001-01-01');
// 2001-01-04 00:00:00.000000
$datetime->modify('+3 days');
// 2001-02-04 00:00:00.000000
$datetime->modify('+1 month');
// 2001-02-03 23:59:00.000000
$datetime->modify('-60 seconds');
// 2001-02-02 00:00:00.000000
$datetime->modify('yesterday');
// 2001-02-02 18:00:00.000000
$datetime->modify('6pm');
The $datetime->modify() method is the easiest way to modify any instance of DateTime.
However, due to parsing it is somewhat inefficient. If you are modifying 1000's of dates/times and you need better performance, then use add(), sub(), setDate(), setISODate(), setTime(), and setTimestamp() instead of modify().
$datetime = new DateTime('2001-01-01');
// 2001-06-01 00:00:00.000000
$datetime->setDate(2001, 6, 1);
// 2001-06-01 06:30:00.000000
$datetime->setTime(6, 30, 0);
// No sane person should ever do the below when they could just add 10,000
// seconds, but it's a good way to test how fast your system will handle
// updating DateTime.
$timestamp = $datetime->getTimestamp();
foreach (range(1, 10000) as $i) {
$timestamp++;
$datetime->setTimestamp($timestamp);
}
// 2001-06-01 09:16:40.000000
2. How do I format a date/time string?
It's common that you need to take 1 date/time string and format it as another date/time string, or even just take and existing date/time and update it. The DateTime class makes this simple as well.
How
DateTime has the method format() which returns the date/time as a formatted string.
$datetime = new DateTime;
$format = 'Y-m-d H:i:s';
echo $datetime->format($format);
We are only going to use a small subset of the formatting options available in these examples, so I highly encourage you to checkout the documentation on formatting dates/times as well as the predefined DateTime constants.
Notice: Be aware that if you attempt to escape a character that could be PHP string escape character you may get unexpected results.
Incorrect Result
// output: Da e 2000-12-31
echo $datetime->format("\D\a\t\e\: Y-m-d").PHP_EOL;
Correct Result
// output: Date 2000-12-31
echo $datetime->format("\D\a\\t\e\: Y-m-d").PHP_EOL;
// output: Date 2000-12-31
echo $datetime->format('\D\a\t\e\: Y-m-d').PHP_EOL;
Examples
These are some common formats that you may need:
SQL Dates/Times
// output: 2000-12-31
echo $datetime->format('Y-m-d').PHP_EOL;
// output: 23:59:59
echo $datetime->format('H:i:s').PHP_EOL;
// output: 2000-12-31 23:59:59
echo $datetime->format('Y-m-d H:i:s').PHP_EOL;
End-User Readable Dates/Times
// output: 12/31/2000
echo $datetime->format('n/j/Y').PHP_EOL;
// output: 11:59pm
echo $datetime->format('g:ia').PHP_EOL;
// output: 12/31/2000 at 11:59pm
echo $datetime->format('n/j/Y \a\t g:ia').PHP_EOL;
// output: Sunday the 31st of December 2000 at 11:59:59 PM
echo $datetime->format('l \t\h\e jS \o\f F Y \a\t g:i:s A').PHP_EOL;
Dates/Times With Time zones
date_default_timezone_set('America/New_York');
$datetime = new DateTime('2000-12-31 23:59:59');
// output: 2000-12-31 23:59:59 America/New_York
echo $datetime->format('Y-m-d H:i:s e').PHP_EOL;
// output: 2000-12-31 23:59:59 EST
echo $datetime->format('Y-m-d H:i:s T').PHP_EOL;
// output: 2000-12-31 23:59:59 -0500
echo $datetime->format('Y-m-d H:i:s O').PHP_EOL;
3. How do I get the difference between 2 times?
It is common to need to know the difference in time between 2 dates/times. With DateTime there are actually 3 different ways to achieve this, and which one you will want to use will depend on your needs.
How (with Examples)
Scenario 1: You only need to know if $datetime1 is greater than, less than, or equal to $datetime2
In this case, you can simply directly compare the instances of DateTime.
$datetime1 = new DateTime;
sleep(1);
$datetime2 = new DateTime;
var_dump($datetime1 > $datetime2); // FALSE
var_dump($datetime1 < $datetime2); // TRUE
var_dump($datetime1 == $datetime2); // FALSE
Scenario 2: You need the difference between $datetime1 and $datetime2 expressed as broken-down years/months/days/etc.
This will work for most cases, however the DateInterval instance you get back from $datetime->diff() has its own "gotchas" and may not work for your specific use case.
$datetime1 = new DateTime('2000-01-01 00:00:00.000000');
$datetime2 = new DateTime('2001-02-03 04:05:06.789012');
$diff = $datetime1->diff($datetime2);
// output: 1 Years, 1 Months, 2 Days, 4 Hours, 5 Minutes, 6 Seconds
echo $diff->format('%y Years, %m Months, %d Days, %h Hours, %i Minutes, %s Seconds');
Scenario 3: You need the difference between $datetime1 and $datetime2 expressed in another way.
This will work in any context at the cost of a little extra code.
$interval = 60 * 60 * 24; // 1 day in seconds
$datetime1 = new DateTime('2000-01-01');
$datetime2 = new DateTime;
$diff = $datetime2->getTimestamp() - $datetime1->getTimestamp();
// output: It has been 6956 days since 2000-01-01!
printf('It has been %s days since %s!', floor($diff / $interval), $datetime1->format('Y-m-d'));
4. How do I account for time zones?
When it comes to dealing with time in programming, by far the worst part is dealing with time zones. Fortunately, this is something else that the DateTime class handles gracefully.
How
DateTime's constructor allows you to specify the source time zone in either the date/time string or as the 2nd Argument. After that, just set a new timezone with $datetime->setTimezone() and DateTime will take care of the rest.
// These 2 lines are functionally identical
$datetime = new DateTime('2001-01-01 00:00:00', new DateTimeZone('UTC')); // recommended, may be faster
$datetime = new DateTime('2001-01-01 00:00:00 UTC');
$datetime->setTimezone(new DateTimeZone('EST'));
I recommend checking out the full list of PHP's supported time zones as well as the docs on the DateTimeZone class.
Example
Lets say you want to show your end-users the time your customer support line opens in their time zone. With DateTime the code would look something like this:
$support_opens = new DateTime('08:00:00', new DateTimeZone('America/New_York'));
$customer_timezones = array('America/New_York', 'America/Chicago', 'America/Denver', 'America/Phoenix', 'America/Los_Angeles', 'America/Anchorage', 'America/Adak', 'Pacific/Honolulu');
echo "Today we open at the following times:".PHP_EOL;
foreach ($customer_timezones as $timezone) {
$support_opens->setTimezone(new DateTimeZone($timezone));
echo '* '.$support_opens->format('g:ia \f\o\r \t\h\e e').' time zone'.PHP_EOL;
}
Output:
Today we open at the following times:
* 8:00am for the America/New_York time zone
* 7:00am for the America/Chicago time zone
* 6:00am for the America/Denver time zone
* 6:00am for the America/Phoenix time zone
* 5:00am for the America/Los_Angeles time zone
* 4:00am for the America/Anchorage time zone
* 3:00am for the America/Adak time zone
* 3:00am for the Pacific/Honolulu time zone
Notice: If you supply a time zone in both the date/time string and as the second argument, the argument time zone will be ignored.
$datetime = new DateTime('2001-01-01 00:00:00 EST', new DateTimeZone('UTC'));
// output: 2001-01-01 00:00:00 EST
echo $datetime1->format('Y-m-d H:i:s');
I have 2 variables in PHP. One is getting today's date and adding 1 month to it. That works fine. The other is supposed to take that date and add 6 days to it. For some reason that part refuses to work. Am I simply formatting it wrong? I always get 01-06-1970 in my database.
Here is the variable that gets today's date and adds 1 month (works fine)
$renewdate = date('Y-m-d', strtotime('+1 month'));
Here is the variable that adds 6 days to $renewdate (does not work)
$latedate = date('Y-m-d', strtotime('+6 days',$renewdate));
Second argument of strtotime is Unix timestamp. Currently $renewdate is a string. So:
$latedate = date('Y-m-d', strtotime('+6 days', strtotime($renewdate)));
PHP 5.2.0 brought DateTime, why are you still sticking to old functions? OOP approach is better!
$dtCreate = DateTime::createFromFormat('Y-m-d H:i:s', '2016-08-02 16:16:02');
$dtCreate->add(new DateInterval('P6D'));
This will add 6 days to your DateTime object, see DateInterval for details.
After you added an interval, you may format your object however you wish:
$dtCreate->format('Y-m-d H:i:s');
This will return 2016-08-08 16:16:02, as you can see, it's 6 days later.
Today is 2014-11-16.
I got these three dates in the future but I want them to be only one date instead.
2014-12-15 21:27:12
2014-12-15 21:32:20
2014-12-16 12:22:09
I want to get the total end date from today. That would be aproximately three month into the future but how can i calculate it to be the same date each time from the three dates above?
How can this be achieved with PHP's DateTime and DateInterval classes?
This might help:
$dateTimeObject=new DateTime(date('Y-m-d h:i:s', strtotime('2014-12-16 12:22:09')));
//to get diff with now
$diff = $dateTimeObject->diff(new DateTime(date('Y-m-d h:i:s')));
Then,
//to get diff months
echo $diff->m;
//to get diff hours
echo $diff->h;
//to get diff minutes
echo $diff->i;
And so on.
It is highly recommended to take a look at the PHP's DateTime official document.
Note that, DateTime is available on PHP >=5.2.0
can anyone help me in a problem that i am stuck in for long hours, i am trying to add time like in format h:ia with hour and minute in format 01:00(one hour), 00:30(30 minutes), 02:00(two hour) etc.. in php.
As i have hours in format like('00:30','01:00','01:30','02:00')to the the time i already have.
i tried this
$interval="01:00";
$now=new DateTime('h:ia');
$time=($now,strtotime(+$interval,$now));
but its not working.
Any help will be appreciated.
you should check strtottime() documentation to add 1 hour simply use
strtotime("+1 hour");
you can also use time() + 60*60
There is also method in DateTime object called "add" that you can use.
From manual:
DateTime::add -- date_add — Adds an amount of days, months, years, hours, minutes and seconds to a DateTime object
You can create DateInterval object and add the interval to exsiting DateTime object.
To format date you can use format() method on DateTime object.
Edited:
Simple explode may solve your problem as well.
$interval="01:00";
$xp = explode(":", $interval);
$time=time() + (int)$xp[0] * 60*60 + (int)$xp[1]*60;
echo date("h:ia", $time);
Or more object oriented soution
$interval="01:00";
$now=new DateTime();
$now->add(new DateInterval("P0000-00-00T$interval:00"));
echo $now->format('h:ia');
Working demo
You could try something like that :
$interval = "01:00";
$yourInterval = new DateInterval('P0000-00-00T'.$interval.':00');
//Setting the date and seconds to "0"
$time = new DateTime('now');
//Or any other method to get your DateTime
$time->add($yourInterval);
I think that in all cases, you should use DateTime and DateInterval, OR strtotime()
I'm not sure about mixing them.
I prefer to use DateTime and DateInterval because it's more Object oriented.
In all case i advice not to explode for date operation. It's highly dangerous because of many many problems you can't predict (Like bisexstil seconds etc...)
EDIT :
I guess that if you're just manipulating time, and not date, exploding your string is not a problem, the mainly problem is if you use dates.