i have a problem with arrays, there are not my friends :)
i have a this array:
Array
(
[0] => 2012163115
[1] => 2012163115
[2] => 2012161817
[3] => 201214321971
[4] => 201214321971
[5] => 201214321971
)
and i need this with all the variables appear more than once
Array
(
[0] => 2012163115
[1] => 201214321971
)
i try this
foreach ($array as $val) {
if (!in_array($val, $array_temp)) {
$array_temp[] = $val;
} else {
array_push($duplis, $val);
}
}
but the result is
Array
(
[0] => 2012163115
[1] => 201214321971
[2] => 201214321971
)
where is my mistake? thanks for help!
array_unique() is there for you.
EDIT: ops I didn't notice the "more than once" clause, in that case:
$yourArray = array('a', 'a', 'b', 'c');
$occurrences = array();
array_walk($yourArray, function($item) use(&$occurrences){
$occurrences[$item]++;
});
$filtered = array();
foreach($occurrences as $key => $value){
$value > 1 && $filtered[] = $key;
}
var_dump($filtered);
$array = array(
'2012163115',
'2012163115',
'2012161817',
'201214321971',
'201214321971',
'201214321971',
);
$duplication = array_count_values($array);
$duplicates = array();
array_walk($duplication, function($key, $value) use (&$duplicates){
if ($key > 1)
$duplicates[] = $value;
});
var_dump($duplicates);
Please see http://php.net/manual/en/function.array-unique.php#81513
These are added characters to make SO accept the post!
$array_counting = array();
foreach ($array as $val)
if ( ! in_array($val, $array_counting))
{
$array_counting[$val] ++; // counting
}
$array_dups = array();
foreach ($array_counting as $key => $count)
{
if ($count > 1)
$array_dups[] = $key; // this is more than once
}
Related
After implementing database queries, I am getting the multi-dimensional array below.
Two Dimensional Array
Array
(
[0] => Array
(
[t1] => test1
)
[1] => Array
(
[t2] => test2
)
[2] => Array
(
[t3] => test3
)
[3] => Array
(
[t4] => test4
)
[4] => Array
(
[t5] => test5
)
)
but I want to convert it to a single dimensional array, like the format below:
One Dimensional Array
Array (
t1 => test1
t2 => test2
t3 => test3
t4 => test4
t5 => test5
)
How can I do this?
I think you can use array_reduce() function.
For example:
$multi= array(0 => array('t1' => 'test1'),1 => array('t2' => 'test2'),2 => array('t3' => 'test3'),3 => array('t4' => 'test4'));
$single= array_reduce($multi, 'array_merge', array());
print_r($single); //Outputs the reduced aray
You can use as follows :
$newArray = array();
foreach($arrayData as $key => $value) {
foreach($value as $key2 => $value2) {
$newArray[$key2] = $value2;
}
}
Where $arrayData is your DB data array and $newArray will be the result.
Assuming that source array is array of arrays and it has no the same keys:
<?php
$src = [
['t1'=>'test1'],
['t2'=>'test2'],
['t3'=>'test3'],
['t4'=>'test4'],
['t5'=>'test5'],
];
$result = call_user_func_array('array_merge', $src);
result via var_dump():
array(5) {
["t1"]=>
string(5) "test1"
["t2"]=>
string(5) "test2"
["t3"]=>
string(5) "test3"
["t4"]=>
string(5) "test4"
["t5"]=>
string(5) "test5"
}
You can use array_reduce() to change values of array. In callback get key of item using key() and select first item using reset().
$newArr = array_reduce($oldArr, function($carry, $item){
$carry[key($item)] = reset($item);
return $carry;
});
Check result in demo
Try this function,
function custom_function($input_array)
{
$output_array = array();
for ($i = 0; $i < count($input_array); $i++) {
for ($j = 0; $j < count($input_array[$i]); $j++) {
$output_array[key($input_array[$i])] = $input_array[$i][key($input_array[$i])];
}
}
return $output_array;
}
$arr = custom_function($arr);
print_r($arr);
Give it a try, it will work.
You can use this
<?php
$temp = array(array('t1' => 'test1'), array('t2' => 'test2'), array('t3' => 'test3'), array('t4' => 'test4'), array('t5' => 'test5'));
$result_array = array();
foreach ($temp as $val) {
foreach ($val as $key => $inner_val) {
$result_array[$key] = $inner_val;
}
}
print_r($result_array);
?>
// Multidimensional array
$arrdata = Array(
'0' => Array(
't1' => 'test1'
) ,
'1' => Array(
't2' => 'test2'
) ,
'2' => Array(
't3' => 'test3'
)
);
// Convert to a single array
$data = array();
foreach($arrdata as $key => $value) {
foreach($value as $key1 => $value1) {
$data[$key1] = $value1;
}
}
echo $data;
Try array map function.
$singleDimensionArray = array_map('current',$multiDimensionArray);
You can use this if you don't care about keeping the correct array keys
function flattenA(array $array) {
$return = array();
array_walk_recursive($array, function($a) use (&$return) { $return[] = $a; });
return $return;
}
print_r(flattenA($arr));
// Output
Array
(
[0] => test1
[1] => test2
[2] => test3
[3] => test4
[4] => test5
)
Otherwise
function flattenB(array $array) {
$return = array();
array_walk_recursive($array, function($v,$k) use (&$return) { $return[$k] = $v; });
return $return;
}
print_r(flattenB($arr));
// Output
Array
(
[t1] => test1
[t2] => test2
[t3] => test3
[t4] => test4
[t5] => test5
)
Check both on Sandbox
From answer on similar question
For your specific case, I would use array_reduce where I set the initial value with an empty array
array_reduce($arr, function($last, $row) {
return $last + $row;
}, array());
AFTER PHP 7.4
array_reduce($arr, fn ($last, $row) => $last + $row, []);
Result :
[
't1' => 'test1',
't2' => 'test2',
't3' => 'test3',
't4' => 'test4',
't5' => 'test5'
]
Hey #Karan Adhikari Simple like below one:
<?php
$arr1 = array(array("t1" => "test1"), array("t2" => "test2"), array("t3" => "test3"), array("t4" => "test4"), array("t5" => "test5"));
echo "<pre>";
print_r($arr1);//before
$arr2 = array();
foreach($arr1 as $val){
$arr2 = array_merge($arr2, $val);
}
echo "<pre>";
print_r($arr2); // after you get your answer
Please try this function:
function array_merging($multi_array) {
if (is_array($multi_array)) {
$new_arr = array();
foreach ($multi_array as $key => $value) {
if (is_array($value)) {
$new_arr = array_merge($new_arr, array_merging($value));
}
else {
$new_arr[$key] = $value;
}
}
return $new_arr;
}
else {
return false;
}
}
Use this function:
$your_multi_arr = array(array(array('t1'=>'test1'),array('t2'=>'test2'),array('t3'=>'test3'),array('t4'=>'test4')));
$arr1 = array_merging($your_multi_arr);
echo "<pre>";
print_r($arr1);
Hope, this may be useful for you.
You can try traversing the array using PHP while list and each. I took sample code from PHP website the second example you can check it here
$arr = [['t1' => 'test1'],['t2' => 'test2'],['t3' => 'test3'],['t4' => 'test4'],['t5' => 'test5']];
$output = [];
while (list($key, $val) = each($arr)) {
while (list($k, $v) = each($val)) {
$output[$k] = $v;
}
}
print_r($output);
Output created is
Array
(
[t1] => test1
[t2] => test2
[t3] => test3
[t4] => test4
[t5] => test5
)
You can test it on your own in this Sandbox example.
This will do the trick
$array = array_column($array, 't1');
Note: This function array_column introduced in PHP 5.5 so it won't work in earlier versions.
traverse the array and save the key value, Live Demo here.
<?php
$array = array(array('t1' => 'test1'), array('t2' => 'test2'), array('t3' => 'test3'), array('t4' => 'test4'), array('t5' => 'test5'));
$result = [];
array_walk($array, function($value) use(&$result){
foreach($value as $k => $v)
{
$result[$k] = $v;
}
});
var_dump($result);
`$result = "Query"; $key_value = array();`
foreach ($result as $key => $value) {
$key_value[$key['']] = $value[''];
}
//for checking //echo "<pre>" ; print_r($key_value) ; exit;
return $key_value;
pls fill $key['name given in sql query for field'] and $value['name given in sql query for field'] (both are same)
this works for me
$result = [];
foreach($excelEmails as $arr)
{
foreach ($arr as $item){
$result = array_merge($result , $item);
}
}
dd($result);
i would recomment my way to convert all double-dimensional array to single-dimensional array.
<?php
$single_Array = array();
//example array
$array = array(
array('t1' => 'test1'),
array('t2' => 'test2'),
array('t3' => 'test3'),
array('t4' => 'test4'),
array('t5' => 'test5'));
$size = sizeof($array);
//loop to fill the new single-dimensional array
for($count = 0; $count<sizeof($array);$count++)
{
//take the key of multi-dim array
$second_cell = key($array[$count]);
//set the value into the new array
$single_array[$count] = $array[$count][$second_cell];
}
//see the results
var_dump($single_array);
?>
with this script we can take keys and values to create new single-dimensional array.I hope that i was helpfull to you.
you can see the example here: Array Convert Demo
I have an array that looks something like this:
Array (
[0] => Array ( [country_percentage] => 5 %North America )
[1] => Array ( [country_percentage] => 0 %Latin America )
)
I want only numeric values from above array. I want my final array like this
Array (
[0] => Array ( [country_percentage] => 5)
[1] => Array ( [country_percentage] => 0)
)
How I achieve this using PHP?? Thanks in advance...
When the number is in first position you can int cast it like so:
$newArray = [];
foreach($array => $value) {
$newArray[] = (int)$value;
}
I guess you can loop the 2 dimensional array and use a preg_replace, i.e.:
for($i=0; $i < count($arrays); $i++){
$arrays[$i]['country_percentage'] = preg_replace( '/[^\d]/', '', $arrays[$i]['country_percentage'] );
}
Ideone Demo
Update Based on your comment:
for($i=0; $i < count($arrays); $i++){
if( preg_match( '/North America/', $arrays[$i]['country_percentage'] )){
echo preg_replace( '/[^\d]/', '', $arrays[$i]['country_percentage'] );
}
}
Try this:
$arr = array(array('country_percentage' => '5 %North America'),array("country_percentage"=>"0 %Latin America"));
$result = array();
foreach($arr as $array) {
$int = filter_var($array['country_percentage'], FILTER_SANITIZE_NUMBER_INT);
$result[] = array('country_percentage' => $int);
}
Try this one:-
$arr =[['country_percentage' => '5 %North America'],
['country_percentage' => '0 %Latin America']];
$res = [];
foreach ($arr as $key => $val) {
$res[]['country_percentage'] = (int)$val['country_percentage'];
}
echo '<pre>'; print_r($res);
output:-
Array
(
[0] => Array
(
[country_percentage] => 5
)
[1] => Array
(
[country_percentage] => 0
)
)
You can use array_walk_recursive to do away with the loop,
passing the first parameter of the callback as a reference to modify the initial array value.
Then just apply either filter_var or intval as already mentioned the other answers.
$array = [
["country_percentage" => "5 %North America"],
["country_percentage" => "0 %Latin America"]
];
array_walk_recursive($array, function(&$value,$key){
$value = filter_var($value,FILTER_SANITIZE_NUMBER_INT);
// or
$value = intval($value);
});
print_r($array);
Will output
Array
(
[0] => Array
(
[country_percentage] => 5
)
[1] => Array
(
[country_percentage] => 0
)
)
You could get all nemeric values by looping through the array. However I don't think this is the most efficient and good looking answer, I'll post it anyways.
// Array to hold just the numbers
$newArray = array();
// Loop through array
foreach ($array as $key => $value) {
// Check if the value is numeric
if (is_numeric($value)) {
$newArray[$key] = $value;
}
}
I missunderstood your question.
$newArray = array();
foreach ($array as $key => $value) {
foreach ($value as $subkey => $subvalue) {
$subvalue = trim(current(explode('%', $subvalue)));
$newArray[$key] = array($subkey => $subvalue);
}
}
If you want all but numeric values :
$array[] = array("country_percentage"=>"5 %North America");
$array[] = array("country_percentage"=>"3 %Latin America");
$newArray = [];
foreach ($array as $arr){
foreach($arr as $key1=>$arr1) {
$newArray[][$key1] = intval($arr1);
}
}
echo "<pre>";
print_R($newArray);
This is kind of a ghetto method to doing it cause I love using not as many pre made functions as possible. But this should work for you :D
$array = array('jack', 2, 5, 'gday!');
$new = array();
foreach ($array as $item) {
// IF Is numeric (each item from the array) will insert into new array called $new.
if (is_numeric($item)) { array_push($new, $item); }
}
I Have an array in PHP that looks like:
Array ( [2099:360] => 6-3.25 [2130:361] => 4-2.5 [2099:362] => 14-8.75 )
Notice there is Two Keys that are 2099 and one that is 2130. I Have a foreach to remove the everything after the colon. the $drop is my array
$a = array();
foreach ($drop as $part=>$drop_a){
$ex_part = explode(":", $part);
$a[$ex_part[0]] = $drop_a;
}
print_r($a);
but when I print $a it displays only the recent value of the 2099?
Array ( [2099] => 14-8.75 [2130] => 4-2.5 )
Any Successions? How can I get it to display all of the values?
Thank You for Your Help
One solution is to use a multi-dimensional array to store this strategy:
$a = array();
foreach ($drop as $part=>$drop_a){
$ex_part = explode(":", $part);
if (isset($a[$ex_part[0]])) {
$a[$ex_part[0]][] = $drop_a;
} else {
$a[$ex_part[0]] = array($drop_a);
}
}
Your resulting data-set will however be different:
Array ( [2099] => Array ( [0] => 6-3.25 [1] => 14-8.75) [2130] => Array ( [0] => 4-2.5 ) )
It may be beneficial to you to preserve the second portion after the colon :
$a = array();
foreach ($drop as $part=>$drop_a){
$ex_part = explode(":", $part);
if (isset($a[$ex_part[0]])) {
$a[$ex_part[0]][$ex_part[1]] = $drop_a;
} else {
$a[$ex_part[0]] = array($ex_part[1] => $drop_a);
}
}
Now your result is a little more meaningful:
Array ( [2099] => Array ( [360] => 6-3.25 [362] => 14-8.75) [2130] => Array ( [361] => 4-2.5 ) )
Finally you can use alternative key-naming strategy if one is already occupied:
$a = array();
foreach ($drop as $part=>$drop_a){
$ex_part = explode(":", $part);
if (isset($a[$ex_part[0]])) {
$a[altName($ex_part[0], $a)] = $drop_a;
} else {
$a[$ex_part[0]] = $drop_a;
}
}
function altName($key, $array) {
$key++; // Or however you want to do an alternative naming strategy
if (isset($array[$key])) {
return altName($key, $array); // This will eventually resolve - but be careful with the recursion
}
return $key;
}
Returns:
Array
(
[2099] => 6-3.25
[2130] => 4-2.5
[2100] => 14-8.75
)
You basically have a key and a sub key for each entry, so just put them in a multidimensional array:
$a = array();
foreach ($drop as $key => $val) {
list($key, $subKey) = explode(':', $key);
$a[$key][$subKey] = $val;
}
Gives you:
Array
(
[2099] => Array
(
[360] => 6-3.25
[362] => 14-8.75
)
[2130] => Array
(
[361] => 4-2.5
)
)
You can traverse multidimensional arrays by nesting loops:
foreach ($a as $key => $subKeys) {
foreach ($subKeys as $subKey => $val) {
echo "$key contains $subKey (value of $val) <br>";
}
}
I'm trying to group airlines with relations into single chains.
Array
(
[0] => Array
(
[0] => Aeroflot
[1] => S7
[2] => Transaero
)
[1] => Array
(
[0] => Alitalia
[1] => Lufthansa
)
[2] => Array
(
[0] => Transaero
[1] => United
)
[3] => Array
(
[0] => United
[1] => Alitalia
)
[4] => Array
(
[0] => Volotea
[1] => Iberia
)
[5] => Array
(
[0] => Transaero
[1] => Aeroflot
)
)
From that array I need to find connections between elements and combine it to groups. Expected results:
Array
(
[0] => Array
(
[0] => Aeroflot
[1] => S7
[2] => Transaero
[3] => United
[4] => Alitalia
[5] => Lufthansa
)
[1] => Array
(
[0] => Volotea
[1] => Iberia
)
)
Can anyone help with that? I've tried a dozen of ways but still get no success.
The most closest way I've tried which works but not in all cases:
function array_searchRecursive($needle,$haystack) {
foreach($haystack as $key=>$value) {
$current_key=$key;
if($needle===$value OR (is_array($value) && array_searchRecursive($needle,$value) !== false)) {
return $current_key;
}
}
return false;
}
foreach ($newarr as $key => $airlines)
{
foreach ($airlines as $lastkey => $airline)
{
$index = array_searchRecursive($airline,$newarr);
echo $airline.$index."\n";
if ($index !== false)
{
$newarr[$index] = array_merge($newarr[$index],$airlines);
$lastarr[] = $index;
}
}
}
But it doesn't match all values in array.
Recursive function will help you. You are welcome )
$arr = array(
array('Aeroflot','S7','Transaero'),
array('Alitalia','Lufthansa'),
array('Transaero','United'),
array('United','Alitalia'),
array('Volotea','Iberia'),
array('Transaero','Aeroflot')
);
function getConnections($arr,$curr_line_n=0,$num=0) {
for($i=0;$i<count($arr[$curr_line_n]);$i++) {
$cur_air_name = $arr[$curr_line_n][$i];
for($k=$curr_line_n+1; $k<count($arr); $k++) {
for($l=0;$l<count($arr[$k]);$l++) {
if ($arr[$k][$l]==$cur_air_name) {
$arr[$curr_line_n] = array_values(array_unique(array_merge($arr[$curr_line_n],$arr[$k])));
array_splice($arr,$k,1);
$num++;
$arr = getConnections($arr,$curr_line_n,$num);
}
}
}
}
$num++;
$curr_line_n++;
if ($curr_line_n!=count($arr)) {
$arr = getConnections($arr,$curr_line_n,$num);
}
return $arr;
}
print_r(getConnections($arr));
As per your example you are just grouping sub arrays by taking first sub array as reference. for example if you have any elements common in first sub array and in subsequent sub arrays then you combine them into one sub array.
<?php
$arr = array(
array('a', 'b', 'c', 'd'),
array('d', 't'),
array('t', 'f'),
array('k', 'o'),
array('p', 'z')
);
$arr_implode = array();
foreach ($arr as $key => $value) {
if (is_array($value)) {
$arr_implode[$key] = implode('', $value);
} else {
$arr_implode[$key] = $value;
}
}
$arr_key = array();
$result = array();
$count = count($arr_implode);
$tempj = 0;
for ($i = 0; $i <= $count; $i++) {
$flag = FALSE;
for ($j = ($i + 1); $j < $count; $j++) {
similar_text($arr_implode[$i], $arr_implode[$j], $percent);
if ($percent > 0) {
$result[] = array_merge($arr[$i],$arr[$j]);
break;
} else {
$result[] = $arr[$j];
break;
}
}
}
foreach($result as $key => $val){
$result[$key] = array_unique($val);
}
echo "<pre>";
print_r($result);
echo "</pre>";
?>
Try this code.
$arr = [
['Aeroflot', 'S7', 'Transaero'],
['Alitalia', 'Lufthansa'],
['Transaero', 'United'],
['United', 'Alitalia'],
['Volotea', 'Iberia'],
['Transaero', 'Aeroflot']
];
$hash = [];
$result = [];
foreach($arr as $set){
foreach($set as $el){
if(!$hash[$el]) $hash[$el] = [] ;
$hash[$el] = array_merge($hash[$el], $set);
}
}
function merge_connections(&$h, $key){
if(!$h[$key]) return [];
$data = [$key];
$rels = $h[$key];
unset($h[$key]);
foreach($rels as $rel){
if($rel==$key) continue;
$data = array_merge($data, merge_connections($h, $rel));
}
return $data;
}
foreach(array_keys($hash) as $company){
if(!$hash[$company]) continue;
array_push($result, merge_connections($hash, $company));
}
print_r($result);
I have this array:
Array
(
[count] => 12
[6] => CN=G_Information_Services,CN=Users,DC=hccc,DC=campus
[7] => CN=WEBadmin,CN=Users,DC=hccc,DC=campus
[9] => CN=G_ISDept,CN=Users,DC=hccc,DC=campus
[10] => CN=STAFF,CN=Users,DC=hccc,DC=campus
)
and I want to create an array of values that consist of the value between the first CN= and , of each array value below.
I probably will have to loop thru the array above, do a regex search for the first occurrence of cn and the value that follows it
I am not sure what I am doing wrong.
I need the final result to be an array that resembles this:
array('G_Information_Services', 'WEBadmin', 'G_ISDept', 'STAFF');
Use preg_match on each of the array values to get only the first corresponding CN value.
$found = array();
foreach ($arr AS $values) {
if (preg_match('/CN=([^,]+),/',$values,$matches))
$found[] = $matches[1];
}
Output
Array
(
[0] => G_Information_Services
[1] => WEBadmin
[2] => G_ISDept
[3] => STAFF
)
Try this (not the most efficient way but it should work):
foreach ($array as $key => $value)
{
if (is_numeric($key))
{
$array[$key] = explode(',', $array[$key]);
$array[$key] = $array[$key][0];
$array[$key] = substr($array[$key], 3);
}
}
This gets the first value of CN= of each element of the array, it also ignores any DC= values.
$arr = array(
'count' => 12,
6 => 'CN=G_Information_Services,CN=Users,DC=hccc,DC=campus',
7 => 'CN=WEBadmin,CN=Users,DC=hccc,DC=campus',
9 => 'CN=G_ISDept,CN=Users,DC=hccc,DC=campus',
10 => 'CN=STAFF,CN=Users,DC=hccc,DC=campus'
);
$newArr = array();
foreach($arr as $key => $value)
{
if($key != 'count')
{
$temp = explode(',', $value);
foreach($temp as $item)
{
if(strpos($item, 'CN=') === 0)
{
$item = substr($item, 3 );
$newArr[] = $item;
break 1;
}
}
}
}
print_r($newArr);