I may be dumb. Not sure yet.
Trying to do something that should be simple:
$database = '10.10.10.81:?????';
$username = 'admin';
$password = 'pw';
$conn = ibase_connect($database, $username, $password);
if (!$conn)
{
echo "Error while connecting: ".ibase_errmsg();
exit();
}
echo 'workan';
We hit the error: connection rejected by remote interface. From another question here I read that this comes from various things: Could be a user/password problem, could be a host ($database) problem, something else that I forget.
I believe my host string is terribly wrong and can't figure out how I should be going about this. Perhaps my google-fu is not up to par.
Trying to get to
E:\fishbowl\database\data\base.fdb
on 10.10.10.81, a separate local computer
Tried a bunch of combinations but can't seem to make anything work.
Edit: Just a heads up, this is a firebird database. Not sure if that changes things
For windows, it should look like this:
localhost/10095:C:/Data/SKLADFD.FDB.
See how port (in this case 10095) is specified.
In your case:
10.10.10.81/3050:E:/fishbowl/database/data/base.fdb
Path to the file must be local file on server, not windows share on connecting machine.
Related
I'm a total beginner when it comes to PHP, I have a fair grasp of the syntax but I'm not sure about the safest way to utilise it to connect to my server. I apologise that this is a sort of generic question rather than a code problem, since my code technically works.
I have a .php site doc with a basic comment submission form. The only way I can think of to connect to the server is to allow a "dummy" user with select only privelege to call a stored function to accept the comment.
If my dummy account is called siteuser then am I going round this the right way? This is the section of the PHP that I'm using to connect. I believe this code is only visible server side so nobody can ever see it and use the password or username to connect some other way? Or is there a sort of default string I can use in my php without creating the dummy user, seeing as the php and server is all hosted via the same provider?
$sqlserv = "localhost";
$sqlname = "siteuser";
$sqlpass = "mypassword";
$sqldbdb = "comments_table";
$conn = new mysqli($sqlserv, $sqlname, $sqlpass, $sqldbdb);
What i do is this to connect to my DB
db.php:
<?php
// Load configuration as an array. Use the actual location of your configuration file
$config = parse_ini_file('/somepath/config.ini');
//Mysqli Connection
$conn = new mysqli($config['host'], $config['user'], $config['pass'], $config['dbname']);
if($conn->connect_errno > 0){
die('Unable to connect to database [' . $conn->connect_error . ']');
//Set encoding
mysqli_set_charset($conn, "utf8") or die;
}
?>
and in config.ini:
[database]
user = johndoe
pass = someweirdpassword
dbname = the_name
host = localhost
both files have 700 permissions, so only user (and no one else can access it)
also the config.ini file is placed somewhere outside the public_html directory, i'm not totally sure if that helps or not but i do it that way.
I just installed MAMP and have created a MYSQL database. I can access it via PHPMYADMIN.
In my php page I have this, pasted directly from the MAMP webstart page--
$user = 'root';
$password = 'root';
$db = 'local_db';
$host = 'localhost';
$port = 3306;
$link = mysql_connect(
"$host:$port",
$user,
$password
);
$db_selected = mysql_select_db(
$db,
$link
);
The resulting page stops at this point, won't print anything below these instructions.
I've tried changing the port in the MAMP preferences. I also included or die("Could not connect"); after the first line, but still don't get any text after the link data in the page.
I checked online, and others with the problem at least see the die text. I don't get that.
I haven't changed any passwords or data other than mess with the port number.
Any help would be appreciated!
Please give the following a try, I have developed and tested it locally, functionality within has been documented to help you understand what is going on in every step.
/**
*
* Modern method of connecting to a MySQL database and keeping it simple.
*
* If you would like to learn more about PDO,
* please visit http://php.net/manual/en/book.pdo.php
*
*/
//Set up database connection constants, so they cannot be changed.
define('DBHOST','127.0.0.1'); //Change this to the ip address of your database
define('DBNAME','test'); // Change this to the database name you are trying to connect to.
define('DBUSER','databaseuser'); // Insure this user is not the root user!!!!
define('DBPASS','databasepassword'); // Insure this is not the root password!!!!
//Let's try to connect to the database first.
try {
//Initiate a new PDO object called $MYDB and pass it the proper information to make
//the connection
$MYDB = new PDO("mysql:host=".DBHOST.";dbname=".DBNAME."", DBUSER, DBPASS);
//If we are successful show it :D for the test page, if this is for production you should not show this.
echo "Database connection was successful.";
//If this does not worth catch the exception thrown by PDO so we can use it.
} catch(PDOException $e) {
//Show that there was an issue connecting to the database. Do not be specific because,
//user's do not need to know the specific error that is causing a problem for security
//reasons.
echo "Oh, sorry there was an issue with your request please try again.";
//Since we had an issue connecting to the database we should log it, so we can review it.
error_log("Database Error" . $e->getMessage());
}
//Since this is 100% php code we do not need to add a closing php tag
//Visit http://php.net/manual/en/language.basic-syntax.phptags.php for more information.
If you have any issues with this please attempt to break it up into smaller pieces while reviewing the PDO documentation.
I have to build an android app which connects to a remote MYSQL webserver and retrieve information for display purpose.
So I did research coz I had no idea where to start. I read an article it mentions the better approach for that is to use php script. And didn’t know anything about how server, database and php works, so I studied php from here “http://www.homeandlearn.co.uk/php/php12p1.html” to understand and downloaded WhampServer to do some testing. On local machine everything worked fine.
But main thing I don’t understand is “HOW TO CONNECT TO REMOTE SERVER/DATABASE”.
It’s obvious that I’m doing something really stupid, I just need help to find out what am I doing wrong.
When we test php script on local machine in webrowse we use "localhost/some.php." But when I want to test same php script on remoter server from my local machine then what and how should I do? Do I need to make some changes in configuration file on server side?
I have done more research before asking this question here to understand remote server connection in php but I still don’t understand. I have gone through almost all the pages within the link below:
https://www.google.co.uk/search?q=connect+to+remote+mysql+webserver+php&rlz=1C1AVSX_enGB447GB448&oq=connect+to+remote+mysql+webserver+php&aqs=chrome.0.69i57j69i62l3.19724j0&sourceid=chrome&ie=UTF-8#fp=5a2359cf96dc5f79&q=how+to+connect+to+remote+mysql+web+server+php
And help would be much appreciated.
If my question is not clear please let me know I'll try to explain more. or think of it as if you have to connect to a remote MySQL server how would you do , means what is the process and steps involved in that.
Thanks everyone.
Edit
I have created a database "dealt3_raj_test" on remote server. and when I type "examplewebserver.CO.UK/myphpscriptname" in my web browser.
It gives me error "An error occurred , You have reached the error page"
<?PHP
$user_name = "dealt3_raj";
$password = "5dN5nh&eMd(vCR$dzk";
$database = "dealt3_raj_test";
$server = "examplewebserver.CO.UK";
$db_handle = mysql_connect($server, $user_name, $password);
$db_found = mysql_select_db($database, $db_handle);
if($db_handle)
{
print "Connected";
}
else
{
print "Can not connect to server";
}
if ($db_found)
{
print "DataBase found";
}
else
{
print "DataBase not found";
}
?>
Adding onto #user4035's comment, after opening the connection, use JDBC in your Android/Java code to interact with the database.
That said, it is not good practice. Rather create a web service
Your application may experience latency/connectivity issues. This will impact performance.
Your MySQL server will have to be open to remote connections which is strongly advised against
If your Android App is intended for public usage, it means the database username and password of your MySQL server reside on everyone's phone using your app. Encrypted or not this makes your database server a "step less" secure
Well answered here on SO (JDBC vs Web Service for Android)
use this code to connect with data base
$username = "database user name";
$password = "DB password";
$hostname = "hostname";
//connection to the database
$dbhandle = mysql_connect($hostname, $username, $password) or die("Unable to connect to MySQL");
//select a database to work with
$selected = mysql_select_db("data base name",$dbhandle) or die("Could not select examples");
I am programming a game in PHP and have the following code to connect to a database
//$sqldb=mysql_connect('godaddy.hostedresource.com', 'godaddyUserName', 'godaddyPassword') OR die ('Unable to connect to database! Please try again later.');
$sqldb=mysql_connect('localhost', 'root', 'mypassword') OR die ('Unable to connect to database! Please try again later.');
The trick here is that if I am on the production server I comment out the godaddy database; when I upload the code to the server I then comment out the localhost code instead.
Unfortunately the ineveitable has happened and I uploaded the code with the wrong connection commented out; this led to 24 hours of locked out customers! :(
Is there a way to have the code to tell if it is on the localhost server, and if it isn't it then looks for the godaddy connection?
you can try this to identify if its on live or localhost
if($_SERVER["SERVER_NAME"] == "localhost"
&&
$_SERVER["SERVER_ADDR"] == "127.0.0.1"){
// in localhost
$hostname = "localhost";
$username = "localuser";
$password = "localpassword";
}else{
// not in localhost
$hostname = "livehost";
$username = "liveuser";
$password = "livepassword";
}
and fail if couldn't connect to database but save the error into a file.
if(!mysql_connect($hostname,$username,$password)){
file_put_contents("mysql_connect.error",mysql_error(),FILE_APPEND);
die("Couldn't connect to database");
}
a suggestion, try not to use mysql_* anymore, switch to PDO or mysqli ..
if ($_SERVER['SERVER_NAME'] == 'the.name.of.your.devel.server') {
$host = 'localhost';
} else {
$host = 'name.of.godaddy.server';
}
$sqldb = mysql_connect($host, ....);
i normally use a method of obtaining the URL / domain of the site? This can work in certain situations and setups. Otherwise if your operating with a fixed IP than you can also use this method
Have a look over the methods using $_SERVER
PHP $_SERVER
One way would be for you to check your external IP address and see where you are. A solution should present itself by looking at the properties inside the $_SERVER global variable.
I have a good suggestion : You coding a game , game is a big program, you don't use mysql* function directly in big program , because yourself should handling them, such as error handling.i suggest you use a DB-Handler. please google for : DB-Handler PHP
As has been mentioned by other people, you can obtain the current site your script is running on using the $_SERVER variable. However, I would like to provide an alternative solution.
You could make a folder in your website (both local and production), something like config, then store a configuration file in it, for example config.php, with the following:
<?php
// Local
$db_host = 'localhost';
$db_username = 'root';
$db_password = 'mypassword';
?>
And for production:
<?php
// Production
$db_host = 'godaddy.hostedresource.com';
$db_username = 'godaddyUserName';
$db_password = 'godaddyPassword';
?>
and disallow access to the directory with a .htaccess file in the directory, something like:
deny from all
Then, in your PHP code, do the following:
<?php
require_once($_SERVER["DOCUMENT_ROOT"] . "/config/config.php");
$sqldb=mysql_connect($db_host, $db_username, $db_password) OR die ('Unable to connect to database! Please try again later.');
?>
Now, simply leave the different configuration files where they're at and upload everything else, so your code will access different configuration files whenever it runs.
Also, the .htaccess file should prevent anyone from accessing the file via HTTP, and having the file contents in PHP tags, as well as a .php extension should prevent anyone from seeing any contents if they were able to access the file (PHP would parse the file before it is rendered, and would output nothing).
Is it possible to connect to a database lying on different server through another server ?
For example :-
I want to access the users table of www.abc.com from www.xqz.com, both are on different server.
Can you give me any ideas ?
will really appreciate if provide me the php query to connect.
Thanks.
"Is it possible" is a bit over-reaching, I think. To give you the shortest answer, yes, it is possible. However, whether or not you could do it depends on a lot of variables, not least of which is whether your hosting providers allow it. For instance, I use Hostmonster for Linux hosting, and to remotely access my MySQL database I have to first whitelist the IP address of the machine that will be accessing it.
Most hosting services provide a F.A.Q. section that should do a decent job of answering this particular question for you. Some will even provide support technicians help you set it up (Hostmonster does, within reason).
HTH.
Try This :
<?php
// Server in the this format: <computer>\<instance name> or
// <server>,<port> when using a non default port number
// Suppose your "www.abc.com" has an IP = 192.168.1.1
// So to connect, do something like this :
$server = '192.168.1.1,PORT_NUMBER'; // FOR WINDOWS
$server = '192.168.1.1:PORT_NUMBER'; // FOR LINUX
// Connect to MSSQL
$link = mssql_connect($server, [username], [password]);
if (!$link) {
die('Something went wrong while connecting to MSSQL');
}
?>