I want to remove special characters in a string but have "ñ / Ñ" and "-" remain.
So if I have:
»¿Antonio Ramon-Peñaą
Result would be:
Antonio Ramon-Peña
You could use PCRE verbs to allow for a set list of characters, if it matches that ignore it. Then for all other characters (because it is not a character you care about) remove them.
preg_replace('/[\w\h-](*SKIP)(*FAIL)|./u', '', '»¿Antonio Ramon-Peñaą')
For a longer regex explanation see https://regex101.com/r/pCwGuy/1/. Basically [\w\h-] are any horizontal spaces, word characters, or hyphens. The u modifier after the closing delimiter expands the \w to include word characters outside ascii set. The . is any single character.
Alternatively you could match all valid characters then rejoin them.
preg_match('/[\w\h-]+/u', '»¿Antonio Ramon-Peñaą', $match);
echo implode('', $match);
Consider the following strings
breaking out a of a simple prison
this is b moving up
following me is x times better
All strings are lowercased already. I would like to remove any "loose" a-z characters, resulting in:
breaking out of simple prison
this is moving up
following me is times better
Is this possible with a single regex in php?
$str = "breaking out a of a simple prison
this is b moving up
following me is x times better";
$res = preg_replace("#\\b[a-z]\\b ?#i", "", $str);
echo $res;
How about:
preg_replace('/(^|\s)[a-z](\s|$)/', '$1', $string);
Note this also catches single characters that are at the beginning or end of the string, but not single characters that are adjacent to punctuation (they must be surrounded by whitespace).
If you also want to remove characters immediately before punctuation (e.g. 'the x.'), then this should work properly in most (English) cases:
preg_replace('/(^|\s)[a-z]\b/', '$1', $string);
As a one-liner:
$result = preg_replace('/\s\p{Ll}\b|\b\p{Ll}\s/u', '', $subject);
This matches a single lowercase letter (\p{Ll}) which is preceded or followed by whitespace (\s), removing both. The word boundaries (\b) ensure that only single letters are indeed matched. The /u modifier makes the regex Unicode-aware.
The result: A single letter surrounded by spaces on both sides is reduced to a single space. A single letter preceded by whitespace but not followed by whitespace is removed completely, as is a single letter only followed but not preceded by whitespace.
So
This a is my test sentence a. o How funny (what a coincidence a) this is!
is changed to
This is my test sentence. How funny (what coincidence) this is!
You could try something like this:
preg_replace('/\b\S\s\b/', "", $subject);
This is what it means:
\b # Assert position at a word boundary
\S # Match a single character that is a “non-whitespace character”
\s # Match a single character that is a “whitespace character” (spaces, tabs, and line breaks)
\b # Assert position at a word boundary
Update
As raised by Radu, because I've used the \S this will match more than just a-zA-Z. It will also match 0-9_. Normally, it would match a lot more than that, but because it's preceded by \b, it can only match word characters.
As mentioned in the comments by Tim Pietzcker, be aware that this won't work if your subject string needs to remove single characters that are followed by non word characters like test a (hello). It will also fall over if there are extra spaces after the single character like this
test a hello
but you could fix that by changing the expression to \b\S\s*\b
Try this one:
$sString = preg_replace("#\b[a-z]{1}\b#m", ' ', $sString);
I have a website where people can add content and when they type in titles, all characters are filtered when parsing to MySQL with PHP, only allowing members to write text and numbers. But I want to allow dashes (-) and brackets/parenthesis (()). Currently, I have:
$video_title = preg_replace('#[^A-za-z0-9 ?!.,]#i', '', $_POST['video_title']);
What shall I add or remove to the preg_replace function to allow these characters?
Just add the \( \) \- to the expression
[^a-z0-9 ?!.,()-]
Since it just got erased, you only the the a-z once if it is case insensitive.
This is not really an answer, but it didn't fit well in the comment box.
Note that A-z may not do what you expect in a regexp character class: it matches all characters whose ASCII code lies between those of A and z, which includes all upper- and lowercase letters, but also a bunch of punctuation characters:
echo join("", preg_grep("/[A-z]/", array_map("chr", range(0, 255)))) . "\n";
Outputs:
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz
Im trying to clean a post string used in an ajax request (sanitize before db query) to allow only alphanumeric characters, spaces (1 per word, not multiple), can contain "-", and latin characters like "ç" and "é" without success, can anyone help or point me on the right direction?
This is the regex I'm using so far:
$string = preg_replace('/^[a-z0-9 àáâãäåçèéêëìíîïðñòóôõöøùúû-]+$/', '', mb_strtolower(utf8_encode($_POST['q'])));
Thank you.
$regEx = '/^[^\w\p{L}-]+$/iu';
\w - matches alphanumerics
\p{L} - matches a single Unicode Code Point in the 'Letters' category (see the Unicode Categories section here).
- at the end of the character class matches a single hyphen.
^ in the character classes negates the character class, so that the regex will match the opposite of the character class (anything you do not specify).
+ outside of the character class says match 1 or more characters
^ and $ outside of the character class will cause the engine to only accept matches that start at the beginning of a line and goes until the end of the line.
After the pattern, the i modifier says ignore case and the u tells the pattern matching engine that we're going to be sending UTF8 data it's way, and g modifier originally present has been removed since it's not necessary in PHP (instead global matching is dependent on which matching function is called)
$string = mb_strtolower(utf8_encode($_POST['q'])));
$string = preg_replace('/[^a-z0-9 àáâãäåçèéêëìíîïðñòóôõöøùúû-]+/g', '', $string);
$string = preg_replace('/ +/g', ' ', $string);
Why not just use mysql_real_escape_string?
$string = preg_replace('/[^a-z0-9 àáâãäåçèéêëìíîïðñòóôõöøùúû\-]/u', '', mb_strtolower(utf8_encode($_POST['q']), 'UTF-8'));
$string = preg_replace( '/ +/', ' ', $string );
should do the trick. Note that
the character class is negated by putting ^ inside the character class
you need the u flag when dealing with unicode strings either in the pattern or in the subject
it's better to specify the character set explicitly in mb_* functions because otherwise they will fall back on your system defaults, and that may not be UTF-8.
the hyphen character needed escaping (\- instead of - at the end of your character class)
How can I remove control characters like STX from a PHP string? I played around with
preg_replace("/[^a-zA-Z0-9 .\-_;!:?äÄöÖüÜß<>='\"]/","",$pString)
but found that it removed way to much. Is there a way to remove only
control chars?
If you mean by control characters the first 32 ascii characters and \x7F (that includes the carriage return, etc!), then this will work:
preg_replace('/[\x00-\x1F\x7F]/', '', $input);
(Note the single quotes: with double quotes the use of \x00 causes a parse error, somehow.)
The line feed and carriage return (often written \r and \n) may be saved from removal like so:
preg_replace('/[\x00-\x09\x0B\x0C\x0E-\x1F\x7F]/', '', $input);
I must say that I think Bobby's answer is better, in the sense that [:cntrl:] better conveys what the code does than [\x00-\x1F\x7F].
WARNING: ereg_replace is deprecated in PHP >= 5.3.0 and removed in PHP >= 7.0.0!, please use preg_replace instead of ereg_replace:
preg_replace('/[[:cntrl:]]/', '', $input);
For Unicode input, this will remove all control characters, unassigned, private use, formatting and surrogate code points (that are not also space characters, such as tab, new line) from your input text. I use this to remove all non-printable characters from my input.
<?php
$clean = preg_replace('/[^\PC\s]/u', '', $input);
for more info on \p{C} see http://www.regular-expressions.info/unicode.html#category
PHP does support POSIX-Classes so you can use [:cntrl:] instead of some fancy character-magic-stuff:
ereg_replace("[:cntrl:]", "", $pString);
Edit:
A extra pair of square brackets might be needed in 5.3.
ereg_replace("[[:cntrl:]]", "", $pString);
TLDR Answer
Use this Regex...
/[^\PCc^\PCn^\PCs]/u
Like this...
$text = preg_replace('/[^\PCc^\PCn^\PCs]/u', '', $text);
TLDR Explanation
^\PCc : Do not match control characters.
^\PCn : Do not match unassigned characters.
^\PCs : Do not match UTF-8-invalid characters.
Working Demo
Simple demo to demonstrate: IDEOne Demo
$text = "\u{0019}hello";
print($text . "\n\n");
$text = preg_replace('/[^\PCc^\PCn^\PCs]/u', '', $text);
print($text);
Output:
(-Broken-Character)hello
hello
Alternatives
^\PC : Match only visible characters. Do not match any invisible characters.
^\PCc : Match only non-control characters. Do not match any control characters.
^\PCc^\PCn : Match only non-control characters that have been assigned. Do not match any control or unassigned characters.
^\PCc^\PCn^\PCs : Match only non-control characters that have been assigned and are UTF-8 valid. Do not match any control, unassigned, or UTF-8-invalid characters.
^\PCc^\PCn^\PCs^\PCf : Match only non-control, non-formatting characters that have been assigned and are UTF-8 valid. Do not match any control, unassigned, formatting, or UTF-8-invalid characters.
Source and Explanation
Take a look at the Unicode Character Properties available that can be used to test within a regex. You should be able to use these regexes in Microsoft .NET, JavaScript, Python, Java, PHP, Ruby, Perl, Golang, and even Adobe. Knowing Unicode character classes is very transferable knowledge, so I recommend using it!
This regex will match anything visible, given in both its short-hand and long-hand form...
\PL\PM\PN\PP\PS\PZ
\PLetter\PMark\PNumber\PPunctuation\PSymbol\PSeparator
Normally, \p indicates that it's something we want to match and we use \P (capitalized) to indicate something that does not match. But PHP doesn't have this functionality, so we need to use ^ in the regex to do a manual negation.
A simpler regex then would be ^\PC, but this might be too restrictive in deleting invisible formatting. You may want to look closely and see what's best, but one of the alternatives should fit your needs.
All Matchable Unicode Character Sets
If you want to know any other character sets available, check out regular-expressions.info...
\PL or \PLetter: any kind of letter from any language.
\PLl or \PLowercase_Letter: a lowercase letter that has an uppercase variant.
\PLu or \PUppercase_Letter: an uppercase letter that has a lowercase variant.
\PLt or \PTitlecase_Letter: a letter that appears at the start of a word when only the first letter of the word is capitalized.
\PL& or \PCased_Letter: a letter that exists in lowercase and uppercase variants (combination of Ll, Lu and Lt).
\PLm or \PModifier_Letter: a special character that is used like a letter.
\PLo or \POther_Letter: a letter or ideograph that does not have lowercase and uppercase
\PM or \PMark: a character intended to be combined with another character (e.g. accents, umlauts, enclosing boxes, etc.).
\PMn or \PNon_Spacing_Mark: a character intended to be combined with another
character without taking up extra space (e.g. accents, umlauts, etc.).
\PMc or \PSpacing_Combining_Mark: a character intended to be combined with another character that takes up extra space (vowel signs in many Eastern languages).
\PMe or \PEnclosing_Mark: a character that encloses the character it is combined with (circle, square, keycap, etc.).
\PZ or \PSeparator: any kind of whitespace or invisible separator.
\PZs or \PSpace_Separator: a whitespace character that is invisible, but does take up space.
\PZl or \PLine_Separator: line separator character U+2028.
\PZp or \PParagraph_Separator: paragraph separator character U+2029.
\PS or \PSymbol: math symbols, currency signs, dingbats, box-drawing characters, etc.
\PSm or \PMath_Symbol: any mathematical symbol.
\PSc or \PCurrency_Symbol: any currency sign.
\PSk or \PModifier_Symbol: a combining character (mark) as a full character on its own.
\PSo or \POther_Symbol: various symbols that are not math symbols, currency signs, or combining characters.
\PN or \PNumber: any kind of numeric character in any script.
\PNd or \PDecimal_Digit_Number: a digit zero through nine in any script except ideographic scripts.
\PNl or \PLetter_Number: a number that looks like a letter, such as a Roman numeral.
\PNo or \POther_Number: a superscript or subscript digit, or a number that is not a digit 0–9 (excluding numbers from ideographic scripts).
\PP or \PPunctuation: any kind of punctuation character.
\PPd or \PDash_Punctuation: any kind of hyphen or dash.
\PPs or \POpen_Punctuation: any kind of opening bracket.
\PPe or \PClose_Punctuation: any kind of closing bracket.
\PPi or \PInitial_Punctuation: any kind of opening quote.
\PPf or \PFinal_Punctuation: any kind of closing quote.
\PPc or \PConnector_Punctuation: a punctuation character such as an underscore that connects words.
\PPo or \POther_Punctuation: any kind of punctuation character that is not a dash, bracket, quote or connector.
\PC or \POther: invisible control characters and unused code points.
\PCc or \PControl: an ASCII or Latin-1 control character: 0x00–0x1F and 0x7F–0x9F.
\PCf or \PFormat: invisible formatting indicator.
\PCo or \PPrivate_Use: any code point reserved for private use.
\PCs or \PSurrogate: one half of a surrogate pair in UTF-16 encoding.
\PCn or \PUnassigned: any code point to which no character has been assigned.
To keep the control characters but make them compatible for JSON, I had to to
$str = preg_replace(
array(
'/\x00/', '/\x01/', '/\x02/', '/\x03/', '/\x04/',
'/\x05/', '/\x06/', '/\x07/', '/\x08/', '/\x09/', '/\x0A/',
'/\x0B/','/\x0C/','/\x0D/', '/\x0E/', '/\x0F/', '/\x10/', '/\x11/',
'/\x12/','/\x13/','/\x14/','/\x15/', '/\x16/', '/\x17/', '/\x18/',
'/\x19/','/\x1A/','/\x1B/','/\x1C/','/\x1D/', '/\x1E/', '/\x1F/'
),
array(
"\u0000", "\u0001", "\u0002", "\u0003", "\u0004",
"\u0005", "\u0006", "\u0007", "\u0008", "\u0009", "\u000A",
"\u000B", "\u000C", "\u000D", "\u000E", "\u000F", "\u0010", "\u0011",
"\u0012", "\u0013", "\u0014", "\u0015", "\u0016", "\u0017", "\u0018",
"\u0019", "\u001A", "\u001B", "\u001C", "\u001D", "\u001E", "\u001F"
),
$str
);
(The JSON rules state: “All Unicode characters may be placed within the quotation marks except for the characters that must be escaped: quotation mark, reverse solidus, and the control characters (U+0000 through U+001F).”)
regex free method
If you are only zapping the control characters I'm familiar with (those under 32 and 127), try this out:
for($control = 0; $control < 32; $control++) {
$pString = str_replace(chr($control), "", $pString;
}
$pString = str_replace(chr(127), "", $pString;
The loop gets rid of all but DEL, which we just add to the end.
I'm thinking this will be a lot less stressful on you and the script then dealing with regex and the regex library.
Updated regex free method
Just for kicks, I came up with another way to do it. This one does it using an array of control characters:
$ctrls = range(chr(0), chr(31));
$ctrls[] = chr(127);
$clean_string = str_replace($ctrls, "", $string);