I have the following setup below:
Amazon EC2 instance.
IPs:
192.168.1.200 = eth0 = x.x.x.x public ip address
192.168.2.200 = eth1
Apps:
Apache
vhosts:
-domain.tld
PHP
The strange part is this. When I try to browse domain.tld over public ip address, its working fine. But when I browse it through 192.168.2.200, it will keep waiting until no display coming out in the browser. A simple index.php with a text "test" inside is working fine. Only when the php codes like phpinfo() will not be working.
Do you have any idea what could be the problem in php or apache or my network? I have already open all ports on the firewall but the problem still persist.
Thanks.
I found the issue - it's due to incorrect network routing table on the EC2 server including blocking of traffic that rectified through playing security settings.
Thanks to your comment #Dagon.
Related
I have installed WAMP and my computer ip is http://192.168.1.142/
When I entered it in browser I got nothing, my WAMP server doesn't see this ip
I got error :
**This 192.168.1.142 page can’t be found
No webpage was found for the web address:
192.168.1.142 HTTP ERROR 404**
http://prntscr.com/fx1mri
Tried configure httpd.conf Want add there row Listen 192.168.1.142:80 and when I run restart WAMP it's not green , means apache doesn't run ,
How correct this ? Why my local IP can't reach in my browser ?
Probably there will be 2 approach to solve this-
You need to provide the ip-address instead of localhost in your code.
Try not to use Skype at the same time since it uses same port number.
If it's your local computer I'll recommend you to use "http://localhost" or "http://127.0.0.1". Prefer localhost.
If you want to use some other cool hostname you should add it to your (windows)hostfile %SYSTEMROOT%\System32\drivers\etc\hosts
Example of input:
127.0.0.1 localsecure
Other programs like skype and torrent are usually using the same ports. Go to your httpd.conf and change listen to for example 82 and the servername to localhost:82(the port is always the same as the value of listen). And than you can use localhost everywhere for example your phpmyadmin would be:
localhost:82/phpmyadmin
And the directories:
localhost:82/..
Credit: ndsmyter
I can access my wamp server via localhost in my system (port :8080), but not with public ip.
But then again when i try to access my wamp from other networks via public ip, yes i can get in.
The error i receive is "ERR_CONNECTION_REFUSED" it says that connect is rejected.
I have configured everything correctly, yes i have the apache config file set to allow all.
any clue?
Take a look at this. LINK
It could be NAT loopback that causes this for you
I have installed WampServer Version 2.4.9 on windows 7
Created a folder in wamp/www/myproject/index.php ,I am using user account(not admin account).The index.php conatins HTML code only,I tried with index.html too,but nothing worked.
The problem:
When I run localhost or phpmy admin by typing localhost in browser URL space then it shows the main window and then i click on project and get these messages:
This webpage is not available
when I click on more button in browser
The server at myproject can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to
its Internet address. This error is most often caused by having no
connection to the Internet or a misconfigured network. It can also be
caused by an unresponsive DNS server or a firewall preventing Google
Chrome from accessing the network.
I tried running from admin account too but that also did not worked.I tried running the application with off state of firewall too but that also did not work
EDIT:
I uninstalled xxamp ,I have apache tomcat too in my system that is used with JSP ,it takes 8080 port.but it is not running currently.The default port for wamp is 80,I tried running it on 81,8080,but both the thing didn't work.Skype also take port 80 so I exited from skype too...
when i type localhost/myproject,It worked.
but when I type localhost and then main page of wamp comes...and when click on localhost then the dns lookup failure occur that is written initially
check whether port 80 is free. You can check it in your apache conf file.
I'm trying to create a live web server on my Windows 8.1 computer.
I am connected directly to my modem using ethernet (I do have a wireless router) but I am not connected to it on this computer (desktop).
I have XAMPP working and my website appears at http://localhost/home
However, if I put in my IP from www.whatismyip.com it does not load my web server.
What am I missing?
You need to create a Port Forwarding for Port 80 to your Computers local IP Address. There should be a Admin Panel for your Router (normally the Gateway - check out with Start - Run - cmd -> then insert "ipconfig" and check out the Gateway.
And i guess in XAMPP the Internet Access is blocked. But this is a simple Apache Server, so you need to open your httpd.conf File (Should be: “c:\xampp\apache\conf\extra\httpd-xampp.conf)
Search here for:
There should be a "Deny from all" - add a # in Front to deactivate that rule.
Restart your Xampp and it should work.
Here you find more Information about Port-Forwarding:
https://managewp.com/how-to-access-a-local-website-from-internet-with-port-forwarding
Any maybe you will also need to activate Port 80 on your Firewall (depends on your Configuration)
You need a method of telling request sent to your public ip to be forwarded to the private ip of the web server. Try logging into you device (router etc) and setting this up.
What is the easiest option to redirect a request to a different host/port?
Here is my entire scenario:
I am making a request using php to a certain ip and port. The response includes another url location, but it is badly configured and instead of including ip and port, it simply includes a server name. Now, if I access the entire url location that I have as response with the server name replaced with the proper ip and port it works.
I've tried editing /etc/hosts setting the server name to the ip address, but how do I workaround the port too?
I am using mac osx 10.9.4, and I've tried some things with ipfw and pf, but neither really worked.
Thanks.
I had a similar problem quite recently on Mavericks (10.9). The way I solved it included 2 steps:
hosts file
Simply added a line similar to this:
127.0.0.1 www.someaddress.com
port forwarding
To set up port forwarding I used ipfw, which worked fine, e.g:
ipfw add 100 fwd 127.0.0.1,9001 tcp from any to any 80 in
In the example above port 9001 is forwarded to port 80. Even though ipfw is deprecated it still works.