I want to know the memory capacity of the single character in php.
Please anyone give me the code or reference link to get the memory of a character.
Is there any predefined function for calculating the memory of a character as like
strlen();
I have the sample code for calculating the bandwidth of the webpage
This is the sample code
$speed = 10;
ob_start();
include(filename.php);
$now = time();
foreach(str_split(ob_get_clean(), $speed*1024) as $chunk)
{
echo $chunk;
flush();
$now++;
while($now > time())
{
usleep(1000000);
}
}
From this i can get the number of character by using the ob_get_lenght().
If i know the memory of a character then i can find the bandwidth for the webpage
In PHP a character always maps one-to-one on a single octet, ie. a byte. As such strlen correctly returns the number of bytes in a single string - although it might consume more memory because of internal representation (trailing zero or length integer).
To support multibyte notations you need to use the mbstring functions.
See http://www.php.net/manual/en/language.types.string.php. A character is the same as a byte, according to that page.
Also, a character can be multiple bytes (multibyte), depending on the encoding. From my experience, you would need to have the mbstring extension enabled for that. If you don't know if your characters are multiple bytes, then each character is probably one byte.
Related
I need to count the number of such a textarea's value. That textarea might be containing 5000 characters. But I just need to know whether is the number of those characters more than 20 characters or not. I can do that by using strlen() function. Something like this:
$content = $_POST['textarea_content'];
$content_length = mb_strlen($content, 'utf8');
if ( $content_length > 20 ) {
// do stuff
}
But my approach isn't optimise at all. It counts the number of all characters and then compare it. As I said, sometimes there is lots of characters like 5000 characters. So is there any approach to break counting after 20 characters?
Strings in PHP have an internal variable that saves the length of the string, so runtime of strlen($str) is not depends on the length of the string at all.
Your problem is that you want to use mb_strlen in order to get the number of characters in the string (and not the number of bytes). In other words - you want to know the length of the string, even if the string contains Unicode characters.
If you know that your string is UTF-8, it can be used for optimization. UTF-8 will save at most 4-bytes per char, so if you use isset($str[80]) - you know for sure that your string is at-least 20 chars (and probably much more). If not, you will still have to use the mb_ functions to get the information you need.
The reason for the usage of isset instead of strlen is because you asked about the optimized way. You can read more in this question regarding the two.
To sum it up - your optimized code would probably be:
if (isset($str[80]) || mb_strlen(mb_substr($str, 0, 21, 'utf-8'), 'utf-8') > 20) {
....
}
In php, the code will first check the isset part, and if it return true the other part will not run (so you get the optimization here from both the isset and the fact that you don't need to run the mb_ functions).
If you have more information about the characters in your string you can use it for more optimization (if, for example, you know that your all of the chars in your string are from the lower range of the UTF-8, you don't have to use $str[80], you might as-well use $str[40].
You can use this table from wikipedia:
Together with the information from the utf8-chartable website:
In order to help optimize the number of bytes you might need for each char in your string.
If I've read a binary file into a variable using $data = fread('myfile','rb') how can I work through $data a byte at a time. I also want to perform operations on each byte, such as multiplying it by a number and calculating the modulo with respect to another number.
I can reference the variable as an array using $data[$i], but am I getting bytes with this or possibly multi-byte characters? Also when I do this, I can't then perform calculations on the results, such as $data[$i]*4, which is always zero.
I need work through very large files so the solution needs to be quick.
Thanks
I can reference the variable as an array using $data[$i], but am I getting bytes with this or possibly multi-byte characters?
You'll get bytes. PHP strings are single-byte.
Also when I do this, I can't then perform calculations on the results, such as $data[$i]*4, which is always zero.
Convert a character to a number with ord, make your calculations and, if needed, convert back with chr. Alternatively, convert the whole buffer with unpack('c*', $buf), which gives you a numeric array.
I had criticized an answer that suggested preg_match over === when finding substring offsets in order to avoid type mismatch.
However, later on the answer's author has discovered that preg_match is actually significantly faster than multi-byte operating mb_strpos. Normal strpos is faster than both functions but of course, cannot deal with multibyte strings.
I understand that mb_strpos needs to do something more than strpos. However, if regex can do it almost as fast as strpos, what is it that mb_strpos does that takes so much time?
I have strong suspicion that it's an optimization error. Could, for example, PHP extensions be slower than its native functions?
mb_strpos($str, "颜色", 0 ,"GBK"): 15.988190889 (89%)
preg_match("/颜色/", $str): 1.022506952 (6%)
strpos($str, "dh"): 0.934401989 (5%)
Functions were run 106 times. The absolute time(s) accounts for the sum of time of 106 runs of a function, rather than average for one.
The test string is $str = "代码dhgd颜色代码";. The test can be seen here (scroll down to skip the testing class).
Note: According to one of the commentators (and common sense), preg_match also does not use multi-byte when comparing, being subject to same risk of errors as strpos.
To understand why the functions have a different runtime you need to understand what they actually do. Because summing them up as ‘they search for needle in haystack’ isn’t enough.
strpos
If you look at the implementation of strpos, it uses zend_memstr internally, which implements a pretty naive algorithm for searching for needle in haystack: Basically, it uses memchr to find the first byte of needle in haystack and then uses memcmp to check whether the whole needle begins at that position. If not, it repeats the search for the first byte of needle from the position of the previous match of the first byte.
Knowing this, we can say that strpos does only search for a byte sequence in a byte sequence using a naive search algorithm.
mb_strpos
This function is the multi-byte counterpart to strpos. This makes searching a little more complex as you can’t just look at the bytes without knowing to which character they belong to.
mb_strpos uses mbfl_strpos, which does a lot more in comparison to the simple algorithm of zend_memstr, it’s like 200 lines of complex code (mbfl_strpos) compared to 30 lines of slick code (zend_memstr).
We can skip the part where both needle and haystack are converted to UTF-8 if necessary, and come to the major chunk of code.
First we have two setup loops and then there is the loop that proceeds the pointer according to the given offset where you can see that they aware of actual characters and how they skip whole encoded UTF-8 characters: since UTF-8 is a variable-width character encoding where the first byte of each encoded character denotes the whole length of the encoded character. This information is stored in the u8_tbl array.
Finally, the loop where the actual search happens. And here we have something interesting, because the test for needle at a certain position in haystack is tried in reverse. And if one byte did not match, the jump table jtbl is used to find the next possible position for needle in haystack. This is actually an implementation of the Boyer–Moore string search algorithm.
So now we know that mb_strpos …
converts the strings to UTF-8, if necessary
is aware of actual characters
uses the Boyer–Moore search algorithm
preg_match
As for preg_match, it uses the PCRE library. Its standard matching algorithm uses a nondeterministic finite automaton (NFA) to find a match conducting a depth-first search of the pattern tree. This is basically a naive search approach.
I am leaving out preg_match to make the analysis more punctuated.
Taken your observation that mb_strpos is relatively slower compared to strpos, it leads you to the assumption that — because of the consumed time — mb_strpos does more than strpos.
I think this observation is correct.
You then asked what is that "more" that is causing the time difference.
I try to give a simple answer: That "more" is because strpos operates on binary strings (one character = 8 bit = 1 octet = 1 byte). mb_strpos operates on encoded character sequences (as nearly all of the mb_* functions do) which can be X bits, perhaps even in variable length per each character.
As this is always about a specific character encoding, both the haystack as well as the needle string (probably) need to be first validated for that encoding, and then the whole operation to find the string position needs to be done in that specific character encoding.
That is translation work and — depending on encoding — also requires a specific search algorithm.
Next to that the mb extension also needs to have some structures in memory to organize the different character encodings, be it translation tables and/or specific algorithms. See the extra parameter you inject — the name of the encoding for example.
That is by far more work than just doing simple byte-by-byte comparisons.
For example the GBK character encoding is pretty interesting when you need to encode or decode a certain character. The mb string function in this case needs to take all these specifics into account to find out if and at which position the character is. As PHP only has binary strings in the userland from which you would call that function, the whole work needs to be done on each single function call.
To illustrate this even more, if you look through the list of supported encodings (mb_list_encodings), you can also find some like BASE64, UUENCODE, HTML-ENTITIES and Quoted-Printable. As you might imagine, all these are handled differently.
For example a single numeric HTML entity can be up to 1024 bytes large, if not even larger. An extreme example I know and love is this one. However, for that encoding, it has to be handled by the mb_strpos algorithm.
Reason of slowness
Taking a look at the 5.5.6 PHP source files, the delay seems to arise for the most part in the mbfilter.c, where - as hakre surmised - both haystack and needle need to be validated and converted, every time mb_strpos (or, I guess, most of the mb_* family) gets called:
Unless haystack is in the default format, encode it to the default format:
if (haystack->no_encoding != mbfl_no_encoding_utf8) {
mbfl_string_init(&_haystack_u8);
haystack_u8 = mbfl_convert_encoding(haystack, &_haystack_u8, mbfl_no_encoding_utf8);
if (haystack_u8 == NULL) {
result = -4;
goto out;
}
} else {
haystack_u8 = haystack;
}
Unless needle is in the default format, encode it to the default format:
if (needle->no_encoding != mbfl_no_encoding_utf8) {
mbfl_string_init(&_needle_u8);
needle_u8 = mbfl_convert_encoding(needle, &_needle_u8, mbfl_no_encoding_utf8);
if (needle_u8 == NULL) {
result = -4;
goto out;
}
} else {
needle_u8 = needle;
}
According to a quick check with valgrind, the encoding conversion accounts for a huge part of mb_strpos's runtime, about 84% of the total, or five-sixths:
218,552,085 ext/mbstring/libmbfl/mbfl/mbfilter.c:mbfl_strpos [/usr/src/php-5.5.6/sapi/cli/php]
183,812,085 ext/mbstring/libmbfl/mbfl/mbfilter.c:mbfl_convert_encoding [/usr/src/php-5.5.6/sapi/cli/php]
which appears to be consistent with the OP's timings of mb_strpos versus strpos.
Encoding not considered, mb_strpos'ing a string is exactly the same of strpos'ing a slightly longer string. Okay, a string up to four times as long if you have really awkward strings, but even then, you would get a delay by a factor of four, not by a factor of twenty. The additional 5-6X slowdown arises from encoding times.
Accelerating mb_strpos...
So what can you do? You can skip those two steps by ensuring that you have internally the strings already in the "basic" format in which mbfl* do conversion and compare, which is mbfl_no_encoding_utf8 (UTF-8):
Keep your data in UTF-8.
Convert user input to UTF-8 as soon as practical.
Convert, if necessary, back to client encoding if needed.
Then your pseudo-code:
$haystack = "...";
$needle = "...";
$res = mb_strpos($haystack, $needle, 0, $Encoding);
becomes:
$haystack = "...";
$needle = "...";
mb_internal_encoding('UTF-8') or die("Cannot set encoding");
$haystack = mb_convert_encoding($haystack, 'UTF-8' [, $SourceEncoding]);
$needle = mb_convert_encoding($needle, 'UTF-8', [, $SourceEncoding]);
$res = mb_strpos($haystack, $needle, 0);
...when it's worth it
Of course this is only convenient if the "setup time" and maintenance of a whole UTF-8 base is appreciably smaller than the "run time" of doing conversions implicitly in every mb_* function.
The problems with mb_ performance may be caused by a messed php-mbstring package installation (on a linux). Installing it explicitly for the exact version of php installation helped me.
sudo apt-get install php7.1-mbstring
...
Before: Time: 16.17 seconds, Memory: 36.00MB OK (3093 tests, 40272 assertions)
After: Time: 1.81 seconds, Memory: 36.00MB OK (3093 tests, 40272 assertions)
how can i get the "filesize" from a string in php?
I put the string in a mysql database as a blob and i need to store the size of the blob. My solution was to create a temp file and put the string into the temp file. now i can get the filesize from the "string". but that solution is not good...
greetings
It depends. If you have mbstring function overloading enabled, the only call that will work will be mb_strlen($string, '8bit');. If it's not enabled, strlen($string) will work fine as well.
So, you can handle both cases like this:
if (function_exists('mb_strlen')) {
$size = mb_strlen($string, '8bit');
} else {
$size = strlen($string);
}
SELECT length(field) FROM table
From the MySQL docs:
LENGTH(str)
Returns the length of the string str,
measured in bytes. A multi-byte
character counts as multiple bytes.
This means that for a string
containing five two-byte characters,
LENGTH() returns 10, whereas
CHAR_LENGTH() returns 5.
strlen()
before putting it into mysql, or in SQL:
LENGTH()
Notice that lenght can be various depending on character set. If you want to have real length in bytes use strlen(), if you want to have character count use mb_strlen() (if you have utf-8 encoding for example)
If all you are storing is the string, then the size should be the length of your string times the number of bytes in the charset. So for Unicode that would be 2*strlen($string).
strlen($string) is the best example for viewing the size(MB) of a string
strlen() doesnt actually return the number of elements in a string, but the number of bytes in it
example:
echo(strlen('a■')); will return 4, because the black square character is made of 3 bytes, and the 'a' character is made of one.
use mb_strlen() as then you can tell it what type of encoding the string uses (if any) to get the size of it in bytes.
Is there a native or inexpensive way to check for the length of a string in bytes in PHP?
See http://bytes.com/topic/php/answers/653733-binary-string-length
Relevant part:
"In PHP, like in C, the string ends with a zero-character, '\0', (char)
0, null-terminator, null-byte or whatever you like to call it."
No, that's not the case - PHP strings are stored with both the length and the
data, unlike C strings that just has one pointer and uses a terminator. They're
"binary-safe" - NUL doesn't terminate the string.
See the definition of zvalue_value in zend.h; the string part has both a "char
*val" and "int len".
Problems would start if you're using the mbstring.func_overload, which changes
how strlen() and the other functions work, and does try and treat strings as
strings of characters in a specific encoding rather than a string of bytes.
This is not the normal PHP behaviour.
The answer is that strlen should return the number of bytes regardless of the content of the string. For multi-byte character strings, you get the wrong number of characters, but the right number of bytes. However, you need to be certain you're not using the mbstring overload, which changes how strlen behaves.
In the event that you have mbstring overload set or your are developing for the platforms where you are unsure about this setting you can do the following:
$len=strlen(bin2hex($data))/2;
The reason why this works is that in Hex you are guaranteed to get 2 characters for all bytes that come from bin2hex (it returns two chars even for the initial binary 0).
Note that it will use significantly more resources than a normal strlen (afterall, so you should definitely not do that to the large amount of data if it's not absolutely necessary.
On php.org, someone was nice enough to create this function. Just multiply by 8 and you've got however many bits were in that string, as the function returns bytes.
The length of a string (textual data) is determined by the position of the NULL character which marks the end.
In case of binary data, NULL can be and often is in the middle of data.
You don't check the length of binary data. You have to know it beforehand. In your case, the length is 16 (bytes, not bits, if it is UUID).
As far as UUID validity is concerned, any 16-byte value is a valid UUID, so you are out of luck there.