This might be a dumb question, but I have trouble understanding why the following code works as expected
$text = "ab cd";
$text = preg_replace("/\s+/", "", $text);
echo $text;
and outputs abcd.
Shouldn't the backslash in \s be escaped to get its literal meaning inside the regular expression?
Not necessarily, because the string literal rules say that if \ is followed by anything other than another \ or a ' it is treated as any other character. This general rule also affects double-quoted strings, although in that case there are more recognized escape sequences than just these two.
You could escape it if you wanted to, but personally I think the world has enough backslashes already.
Related
I have code below, what I need to change to get result mercedes\\-benz instead of mercedes\-benz
$value = 'mercedes-benz';
$pattern = '/(\+|-|\/|&&|\|\||!|\(|\)|\{|}|\[|]|\^|"|~|\*|\?|:|\\\)/';
$replace = '\\\\${1}';
echo preg_replace($pattern, $replace, $value);
Welcome to the joys of "leaning toothpick syndrome" - backslash is such a commonly used escape character that it frequently requires escaping multiple times. Let's have a look at your case:
Required output (presumably because of some other escaping context): \\
Escape each \ with an additional \ for use in the PCRE regex engine: \\\\
Escape each \ there for use in a PHP string: \\\\\\\\
$value = 'mercedes-benz';
$pattern = '/(\+|-|\/|&&|\|\||!|\(|\)|\{|}|\[|]|\^|"|~|\*|\?|:|\\\)/';
$replace = '\\\\\\\\${1}';
echo preg_replace($pattern, $replace, $value);
As mickmackusa points out, you can get away with six rather than eight backslashes in some cases, such as a replacement of '\\\\\\'; this works because the regex engine sees \\\, which is an escaped backslash (\\) followed by a single backslash (\) that can't be escaping anything because it's the end of the string. Simply doubling for each "layer" of escaping is probably safer than learning when this short-cut is and isn't valid, though.
I can't be sure that I've 100% translated your original attempt, but this works for your lone sample input.
The pattern uses a character class and curly braced quantifiers to improve readability and brevity. Using \K eliminates the need for the reference in the replacement string.
Code: (Demo)
$value = 'mercedes-benz';
$pattern = '`&{2}|\|{2}|[-+/!(){}[\]^"~*?:\\\]\K`';
$replace = '\\\\\\';
echo preg_replace($pattern, $replace, $value);
Ultimately, the trick was to keep adding backslashes to the replacement to get them to show up.
I am trying to learn Regex in PHP and stuck in here now. My ques may appear silly but pls do explain.
I went through a link:
Extra backslash needed in PHP regexp pattern
But I just could not understand something:
In the answer he mentions two statements:
2 backslashes are used for unescaping in a string ("\\\\" -> \\)
1 backslash is used for unescaping in the regex engine (\\ -> \)
My ques:
what does the word "unescaping" actually means? what is the purpose of unescaping?
Why do we need 4 backslashes to include it in the regex?
The backslash has a special meaning in both regexen and PHP. In both cases it is used as an escape character. For example, if you want to write a literal quote character inside a PHP string literal, this won't work:
$str = ''';
PHP would get "confused" which ' ends the string and which is part of the string. That's where \ comes in:
$str = '\'';
It escapes the special meaning of ', so instead of terminating the string literal, it is now just a normal character in the string. There are more escape sequences like \n as well.
This now means that \ is a special character with a special meaning. To escape this conundrum when you want to write a literal \, you'll have to escape literal backslashes as \\:
$str = '\\'; // string literal representing one backslash
This works the same in both PHP and regexen. If you want to write a literal backslash in a regex, you have to write /\\/. Now, since you're writing your regexen as PHP strings, you need to double escape them:
$regex = '/\\\\/';
One pair of \\ is first reduced to one \ by the PHP string escaping mechanism, so the actual regex is /\\/, which is a regex which means "one backslash".
I think you can use "preg_quote()":
http://php.net/preg_quote
This function escapes special chars, so you can give an input as it is, without escaping by yourself:
<?php
$string = "online 24/7. Only for \o/";
$escaped_string = preg_quote($string, "/"); // 2nd param is optional and used if you want to escape also the delimiter of your regex
echo $escaped_string; // $escaped_string: "online 24\/7. Only for \\o\/"
?>
To match a literal backslash, many people and the PHP manual say: Always triple escape it, like this \\\\
Note:
Single and double quoted PHP strings have special meaning of backslash. Thus if \ has to be matched with a regular expression \\, then "\\\\" or '\\\\' must be used in PHP code.
Here is an example string: \test
$test = "\\test"; // outputs \test;
// WON'T WORK: pattern in double-quotes double-escaped backslash
#echo preg_replace("~\\\t~", '', $test); #output -> \test
// WORKS: pattern in double-quotes with triple-escaped backslash
#echo preg_replace("~\\\\t~", '', $test); #output -> est
// WORKS: pattern in single-quotes with double-escaped backslash
#echo preg_replace('~\\\t~', '', $test); #output -> est
// WORKS: pattern in double-quotes with double-escaped backslash inside a character class
#echo preg_replace("~[\\\]t~", '', $test); #output -> est
// WORKS: pattern in single-quotes with double-escaped backslash inside a character class
#echo preg_replace('~[\\\]t~', '', $test); #output -> est
Conclusion:
If the pattern is single-quoted, a backslash has to be double-escaped \\\ to match a literal \
If the pattern is double-quoted, it depends whether
the backlash is inside a character-class where it must be at least double-escaped \\\
outside a character-class it has to be triple-escaped \\\\
Who can show me a difference, where a double-escaped backslash in a single-quoted pattern e.g. '~\\\~' would match anything different than a triple-escaped backslash in a double-quoted pattern e.g. "~\\\\~" or fail.
When/why/in what scenario would it be wrong to use a double-escaped \ in a single-quoted pattern e.g. '~\\\~' for matching a literal backslash?
If there's no answer to this question, I would continue to always use a double-escaped backslash \\\ in a single-quoted PHP regex pattern to match a literal \ because there's possibly nothing wrong with it.
A backslash character (\) is considered to be an escape character by both PHP's parser and the regular expression engine (PCRE). If you write a single backslash character, it will be considered as an escape character by PHP parser. If you write two backslashes, it will be interpreted as a literal backslash by PHP's parser. But when used in a regular expression, the regular expression engine picks it up as an escape character. To avoid this, you need to write four backslash characters, depending upon how you quote the pattern.
To understand the difference between the two types of quoting patterns, consider the following two var_dump() statements:
var_dump('~\\\~');
var_dump("~\\\\~");
Output:
string(4) "~\\~"
string(4) "~\\~"
The escape sequence \~ has no special meaning in PHP when it's used in a single-quoted string. Three backslashes do also work because the PHP parser doesn't know about the escape sequence \~. So \\ will become \ but \~ will remain as \~.
Which one should you use:
For clarity, I'd always use ~\\\\~ when I want to match a literal backslash. The other one works too, but I think ~\\\\~ is more clear.
There is no difference between the actual escaping of the slash in either single or double quoted strings in PHP - as long as you do it correct. The reason why you're getting a WONT WORK on your first example is, as pointed out in the comments, it expands \t to the tab meta character.
When you're using just three backslashes, the last one in your single quoted string will be interpreted as \~, which as far as single quoted strings go, will be left as it is (since it does not match a valid escape sequence). It is however just a coincidence that this will be parsed as you expect in this case, and not have some sort of side effect (i.e, \\\' would not behave the same way).
The reason for all the escaping is that the regular expression also needs backslashes escaped in certain situations, as they have special meaning there as well. This leads to the large number of backslashes after each other, such as \\\\ (which takes eight backslashes for the markdown parser, as it yet again adds another level of escaping).
Hopefully that clears it up, as you seem to be confused regarding the handling of backslashes in single/double quoted strings more than the behaviour in the regular expression itself (which will be the same regardless of " or ', as long as you escape things correctly).
I have double backslashes '\' in my string that needs to be converted into single backslashes '\'. I've tried several combinations and end up with the whole string disappearing when I used echo or more backslashes are added to the string by accident. This regex thing is making me go bonkers...lol...
I tried this amongst other failed attempts:
$pattern = '[\\]';
$replacement = '/\/';
?>
<td width="100%"> <?php echo preg_replace($pattern, $replacement,$q[$i]);?></td>
I do apologise if this is a foolish issue and I appreciate any pointers.
Use stripslashes() - it does exactly what you're looking for.
<td width="100%"> <?php echo stripslashes($q[$i]);?></td>
Use stripslashes instead. Also, in your regex, you are searching for single backslashes and your replacement is incorrect. \\{2} should search for double backslashes and \ should replace them with singles, although I haven't tested this.
Just to explain further, the pattern [\\] matches any character in a set comprised of a single backslash. In php, you should also delimit your regex with forward slashes: /[\\]/
Your replacement, which is (without delimiters) \, is not a regular expression for matching a single backslash. The regex for matching a single backslash is \\. Note the escaping. This said, the replacement term needs to be a string, not a regex (with the exception of backreferences).
EDIT: Sven claims below that stripslashes removes all backslashes. This is simply not true, and I will explain why below.
If a string contains 2 backslashes, the first one will be considered an escaping backslash and will be removed. This can be seen at http://www.phpfiddle.org/main/code/3yn-2ut. The fact that any backslashes remain at all by itself contradicts the claim that stripslashes removes all backslashes.
Just to clarify, this string declaration is invalid: $x = "\";, since the backslash escapes the second quote. This string "\\" contains one backslash. In the process of unquoting this string, this backslash will be removed. This "\\\\" string contains two backslashes. When unquoting, the first will be considered an escaping backslash, and will be removed.
Use preg_replace to turn double backslash into single backslash:
preg_replace('/\\\\{2}/', '\\', $str)
The \ in the first parameter needs to be escaped twice, once for string and once more for regex, just like CodeAngry says.
In the second parameter it only gets excaped once for string.
Make sense?
Never use a regular expression if the string you are looking for is constant, as is the case with "Every instance of double backslash".
Use str_replace() for this task. It is a very easy function that replaces every occurance of a string with another.
In your case: str_replace('\\\\', '\\', $var).
The double backslash actually translates into four backslashed, because inside any quotes (single or double), a single backslash is the start of an escape sequence for the following character. If you want one literal backslash, you have to write two of them. You want two backslashes, you have to write four of them.
I do not like the suggestion of stripslashes(). This will of course "decode" your double backslash into one single backslash. But it will also remove all single backslashes in the whole string. If there were none - fine, otherwise things will fail now.
$pattern = '[\\]'; // wrong
$pattern = '[\\\\]'; // right
escape \ as \\ and escape \\ as \\\\ because \\] means escaped ].
Use htmlentities function to convert your slashes to html entities then using str_replace or preg_match to change them with new entity
How do i make this match the following text correctly?
$string = "(\'streamer\',\'http://dv_fs06.ovfile.com:182/d/pftume4ksnroarhlslexwl7bcnoqyljeudgmd7dimssniu2b2r2ikr2h/video.flv\')";
preg_match("/streamer\\'\,\\\'(.*?)\\\'\)/", $string , $result);
var_dump($result);
Your $string looks weird. Better to make a three pass parse:
$string = str_replace(array("\'"), '', $string);
Now we have string:
"(streamer,http://dv_fs06.ovfile.com:182/d/pftume4ksnroarhlslexwl7bcnoqyljeudgmd7dimssniu2b2r2ikr2h/video.flv)"
Now let's trim brackets:
$string = trim($string, '()');
And finaly, explode:
list($streamer, $url) = explode(',', $string, 2);
No need of regex.
Btw, your string looks like it was crappyly slashed in mysql query.
It's been a while since I last did regexp matching in PHP, but I think you have to remember that:
' doesn't need to be escaped in PHP strings enclosed by "
\ always needs to be escaped in PHP strings
\ needs to be escaped yet another time in regexps (for it's a special character and you want to treat it as a normal one)
=> \ as part of the string to be matched must be escaped 4 times.
My suggestion:
preg_match("/\\(streamer\\\\',\\\\'(.*?)\\\\'\\)/", $string , $result);
You're on the right track. Two barriers to overcome (As codethief says):
1 - Double quoted string interpolation
2 - Regex escape interpolation
For (2), neither comma's nor quotes need to be escaped because they are not metachars
special to regex's. Only the backslash as a literal needs to be escaped, otherwise
in regex context, it represents the start of a metachar sequence (like \s).
For (1), php will try to interpolate escaped chars as a control code (like \n), for
that reason the literal backslash needs to be escaped. Since this is double quoted,
\' the escaped single qoute has no escape meaning.
Therefore, "\\\'" resolves to \\ = \ + \'=\' ~ \\' which is what the regex sees.
Then the regex interpolates the sequence /\\'/ as a literal \+'.
Making a slight change of your regex solves the problem:
preg_match("/streamer\\\',\\\'(.*?)\\\'\)/", $string , $result);
A working example is here http://beta.ideone.com/47EIY