I have the Microsoft ODBC driver installed under Centos working fine with UnixODBC 2.3.0 as instructed. I am trying to install php-ldap and it will upgrade my php which is fine, except it fails on a dependency which is:
libodbc.so.2()(64bit) is needed by php-odbc-5.4.18-1.el6.remi.x86_64
I remember having trouble with this file which I had to hotlink to libodbc.so.1 to get php-pdo working. Now for the upgrade in PHP it's looking for that file and I guess maybe I have the 32 bit installed instead of the 64 bit. I tried copying over the 2.3.1 version and using the standard 2.2.4 but nothing seems to work.
It lives in
/usr/lib64/libodbc.so.2
I feel like if I get the wrong driver in there, PHP-PDO/MS ODBC will stop working just so php-ldap can work. My current PHP version is 5.4.16 and I'd rather just get the php-ldap for that but all the links seem dead - I just want to install it via RPM. Right now I'm using the remi repo to get the latest PHP version and would like an upgrade path without the libodbc causing issues.
ldd on the file:
linux-vdso.so.1 => (0x00007fff25fce000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f5754ac9000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f57548ac000)
libc.so.6 => /lib64/libc.so.6 (0x00007f5754518000)
/lib64/ld-linux-x86-64.so.2 (0x00007f5754f41000)
Look in /etc/odbcinst.ini the path to your driver needs to change
For Example (FreeTDS)
[FreeTDS]
Description=FreeTDS v0.91
Driver=/usr/lib64/libtdsodbc.so
...
What I did was manually install php_pdo by forcing the RPM's. It worked so I don't know what the issue really is... it's a difficult installation to perform with microsoft drivers && linux.
Related
I downloaded MacOS Mojave and did a clean installation on my mid 2012 macbook Pro. Installed XCode with command line tools. Got native Apache and PHP working, with PEARL, PECL and last version of ICU (63.1) for later use of Intl extension.
But every attempt of Intl instalation has failed. Before the clean instalation, i found a intl.so on a pen drive and used ICU version 54, but isn't the best way to get things working for a development enviroment.
In the end, i'm stuck with PECL incapable of finish intall of Intl because can't find php_smart_str.h file.
I've reinstalled the developer tools header files too:
$ sudo installer -pkg /Library/Developer/CommandLineTools/Packages/macOS_SDK_headers_for_macOS_10.14.pkg -target /
Is it possible to have a development enviroment without Homebrew?
When i run at the terminal:
sudo pecl install intl
Returns the following:
/private/tmp/pear/install/intl/intl_error.h:24:10: fatal error: 'ext/standard/php_smart_str.h' file not found
Right after creating libtool and running: make.
Ok, instead of using homebrew, i really wanted to use only native apache and php pre-installed on my MacBook Pro with Mac OS Mojave, trying to maintain the most clean development environment possible for CakePHP use.
So, on Pecl Official site ( https://pecl.php.net/package/intl ), it's clear that Intl package is not maintained anymore and has been superseded. Since PHP 5.3.0 you don't need to use Pecl to install intl extension, it's bundled with PHP.
But, it's missing on native instalation of PHP 7.1.24 on Mac OS Mojave.
Then i downloaded PHP 7.1 from php.net, installed XCode Command Line Tools, ICU (http://site.icu-project.org/), Autoconf, reinstalled the developer tools header files, and finally installed Intl extension using phpize.
Important: you'll have to disable SIP.
We're using a MSSQL db at work and I want to be able to write PHP scripts that fetches data directly from the db to my local MAMP environment. I've tried installing pdo_sqlsrv and sqlsrv using Homebrew and I've tried compiling the extensions on my own using PECL commands, but in both cases it has ended unsuccessfully with the error message:
fatal error: 'sql.h' file not found
I've been googling this problem all day and can't seem to find a solution that I can get to work/understand. I'd be grateful for any help or hints.
Computer: Macbook Pro 2018 (macOS 10.13.6)
Local environment: MAMP PRO 4.5 (PHP version: 7.2.1)
I found the solution here: https://github.com/Microsoft/msphpsql/issues/198
I was missing tools provided by unixodbc, so:
brew install unixodbc
...provided the .h file(s) I was missing. The PECL installer was then able to locate the required libraries. In case it wouldn't have worked, I would have tried:
sudo CXXFLAGS="-I/usr/local/opt/unixodbc/include" LDFLAGS="-L/usr/local/lib" pecl install pdo_sqlsrv
sudo CXXFLAGS="-I/usr/local/opt/unixodbc/include" LDFLAGS="-L/usr/local/lib" pecl install sqlsrv
...as suggested in the link.
I installed Xampp on Ubuntu 16 to work with Laravel.
I ran my Laravel code and got this error : Mcrypt PHP extension required.
After that I tried to install Mcrypt on PHP.
I have done these :
sudo apt-get install mcrypt
sudo phpenmod mcrypt
I have also done this : Link
I also restart the all services from Xampp after every change but I still get error on Laravel.
Any idea ?
My PHP version is 7.0.22 and Ubuntu version is 16.04.1 .
Thank you .
Edit 1
I did this and I still see the error.
After trying to many things. I just got rid of this shit by installing both version on my computer.
First I installed php 7.1.19 version.
Secondly I installed php 7.2.15 version
Now I am working perfectly with my project.
I followed the instructions outlined here:
Install PHP Internationalization extension (Intl) on XAMPP on Mac
Ran sudo pecl install intl
selected the correct files from the Cellar
then this error happened:
/private/tmp/pear/temp/intl/intl_error.h:24:10: fatal error:
'ext/standard/php_smart_str.h' file not found
include
^ 1 error generated. make: *** [php_intl.lo] Error 1 ERROR: `make' failed
No matter, did some research and found out that PHP 7.0.8 deprecated php.smart_str.h to php.smart_string.h
So given my scant knowledge of C++ I copied smart_string.h to smart_str.h and renamed all the headers from STRING to string.....
re-ran pecl -no luck....more errors......without knowing where the .c files are and remaking php (not really interested in going that far) since anyway I'm using XAMPP so that ended that option.
I have php 5.5 on my mac, deep in the usr/local/bin folder
so next step was to get pecl to use those files and generate an intl.so file....
Did that....I have the intl.so file so put it in the 'extensions' folder in XAMPP (for reference: /Applications/XAMPP/xamppfiles/lib/php/extensions/no-debug-non-zts-20151012)
Ran php and came up with this error:
Warning: PHP Startup: Unable to load dynamic library
'/Applications/XAMPP/xamppfiles/lib/php/extensions/no-debug-non-zts-20151012/intl.so'
- dlopen(/Applications/XAMPP/xamppfiles/lib/php/extensions/no-debug-non-zts-20151012/intl.so,
9): Symbol not found: _zval_used_for_init Referenced from:
/Applications/XAMPP/xamppfiles/lib/php/extensions/no-debug-non-zts-20151012/intl.so
Expected in: flat namespace in
/Applications/XAMPP/xamppfiles/lib/php/extensions/no-debug-non-zts-20151012/intl.so
in Unknown on line 0
I imagine it has to do with different versions?
In any case I can't get pecl to install intl without a make error in PHP 7.0.8 on XAMPP. There is no documentation on this and you'd think that if you deprecate a header.h file you'd update all extensions?
Install intl.so in PHP 7 seems impossible?
After a lot of research I was finally able to resolve this. Detailed steps here:
before you begin, check which php path is set. it should be /Applications/XAMPP/xamppfiles/bin/php. If not you can change it by PATH="/Applications/XAMPP/xamppfiles/bin:${PATH}". more detail here
Overall idea is to build the intl-extension from PHP source code on your own. Before you begin make sure you have installed Xcode. Also, install the latest version of autoconf. this might help:
brew install autoconf
Next download the version of PHP you use in XAMPP from php.net. I am using 7.1.18. This version worked for me: php-7.1.31, I’m guessing if you follow the steps it might work for 7.0 or 7.2 as well. Do let me know if it does or doesnt, I’ll update this post. Do not use PHP 7.3 for Magento 2.3.0, it is not supported.
Extract the tar.gz file using (I extracted it inside ~/Downloads/ folder )
tar -xzvf php-7.1.31.tar.gz
cd into the extracted folder
cd php-7.1.31
change to subfolder ext/intl
cd ext/intl/
Run these commands to build the extension
/Applications/XAMPP/bin/phpize
./configure --enable-intl --with-php-config=/Applications/XAMPP/bin/php-config --with-icu-dir=/Applications/XAMPP/xamppfiles/
make
sudo make install
you can now delete all files you downloaded and also the extracted folders.
Open /Applications/XAMPP/xamppfiles/etc/php.ini , and add extension=intl.so
Restart your Apache using XAMPP GUI and it should work.
So far, it seems that extension intl.so for php is bundled with php
and should be compiled with php (intl --enabled). XAMPP does not support this (as of Oct 2016), MAMP does. I do not know about other distros. However, if you're willing to recompile PHP 7, it's worth it just to do that and enable it during compiling.
So....I ran with MAMP. Then I decided that I would simply install apache 2.4 and php 7 and Mysql without the stack and the junk that comes with MAMP or XAMPP and everything works like a charm... so if you need to use CakePHP or intl support etc... just drop XAMPP/MAMP and go with a standard install. I used homebrew (MacOS) and everything is working fine.
Update: As regards Windows, XAMPP does not default it, but you can add the module (dll) in php.ini and works like a charm
The error means that XAMPP doesn't have PHP compiled with intl. You may try:
pecl install intl
but probably it won't work as well.
See: PHP Bug #72879 Pecl install intl make error with PHP 7.0.8.
As for the workaround, try installing memcached extension instead of memcache, e.g.
pecl install memcached
Note: It also requires libmemcached package/library to be installed beforehand. For macOS, install via: brew install libmemcached.
If you wanna try without homebrew, with native apache and php, look at my aswer here: https://stackoverflow.com/a/55131868/3692846
I'm trying to get the latest Mongo Driver to work with MAMP 1.9.6 on OS X 10.5.8.
I built it successfully from source since it seems that there are no pre-compiled releases, included it into the right directory and restarted the apache.
But PHP doesn't recognize the extension. I used the 1.0.11 driver previously which worked fine, but I need the new version, because Doctrines ODM requires it.
When I replace the 1.2.10 mongo.so with the 1.0.11 and restart apache mongo is available. I don't get what could be wrong.
Anyone had this behaviour or any guesses to get this to work?
Update: The PHP error log shows the following:
[01-Jun-2012 22:02:37] PHP Warning: PHP Startup: mongo: Unable to initialize module
Module compiled with module API=20060613
PHP compiled with module API=20090626
These options need to match
in Unknown on line 0
I'm not quite sure what it means?
2. Update:
I was finally able to sync the API version of phpize.
But now I'm not able to build the driver anymore.
I do the following:
phpize
./configure
make
sudo make install
But at the make command I'm getting tons of syntax errors. Seems that it can't find several header files.
The very first one is the zend_config.h and really I just have those other two files:
zend_config.nw.h
zend_config.w32.h
I downloaded the MAMP components to get this files. Why am I missing this one? And there are a lot of others.
I'm using PHP 5.3.5 Is there a way to get those header files from a different source?
I followed the instructions at Develop MongoDB web apps with MAMP under Mac OS X to successfully build mongo.so for MAMP with php 5.3 on OS X 10.7.3.
I'm adding this for historical purposes -- I guarantee that if you're having the same set of problems, you'll want to do this.
Personally, I had a really difficult time getting MAMP's php version to play nicely with the extension builds that I was trying to make.
I discovered that the problem was that MAMP really hadn't been set up to add extensions in general, and during the compilation of the mongo php drivers, it wasn't installing it in the right place -- so I followed the following tutorial on preparing MAMP for additional pecl and pear extensions.
After following those steps to prepare MAMP for adding extensions, you can easily install any extension.
At the part where it starts talking about adding an extension, use sudo pecl install mongo and restart apache from your MAMP interface.
I ran into the same problem when upgrading from PHP 5.3 to 5.4 and was able to solve it by following these steps:
Make sure to upgrade php5-cli as well as just php5 and php5-common
Uninstall the mongo drive
sudo pecl uninstall mongo
Re-install the mongo driver
sudo pecl install mongo