Currently the connection from my ec2- amazon ami instance to elasticache does not work
I attempt to connect and fail with
$server_endpoint = "lolololo.olol.olol.cache.amazonaws.com";
$server_port = 11211;
$dynamic_client = new Memcached();
$dynamic_client->setOption(Memcached::OPT_CLIENT_MODE, Memcached::DYNAMIC_CLIENT_MODE);
// it fails on previous line
// Fatal error: Undefined class constant 'OPT_CLIENT_MODE' in
$dynamic_client->addServer($server_endpoint, $server_port);
$dynamic_client->set('key', 'value', 60);
Steps i took
sudo yum install gcc-c++ php php-pear
sudo pecl install myplaceontheweb.com/assets/AmazonElastiCacheClusterClient-1.0.1-PHP53-64bit.tgz
sudo yum install php-devel
from root:
add
extension=memcached.so
extension=amazon-elasticache-cluster-client.so
to /etc/php.d/memcached.ini
php info says memcached is an installed part of php, i have rebooted the server after doing all of this.
sudo find . -type f -name 'amazon*.so'
yeilds ./usr/lib64/php/modules/amazon-elasticache-cluster-client.so
and it doesn't work by direct linking as an extension either
Is there anything obvious i am doing wrong? can anyone suggest a fix?
I don't know if I did this right, but I was having similar problems and finally got it working.
I was trying to install ElastiCache Cluster Client for PHP on Ubuntu 14.04 with Apache, but kept getting the "Memcached not found" error.
First, I followed the directions here:
http://docs.aws.amazon.com/AmazonElastiCache/latest/UserGuide/Appendix.PHPAutoDiscoverySetup.html
with two changes
A. I downloaded the tookit from
http://elasticache-downloads.s3.amazonaws.com/ClusterClient/PHP-5.5/latest-64bit
B. In addition to adding a memcache.ini file to /etc/php5/cli/conf.d/, I also added one to /etc/php5/apache2/conf.d/
echo "extension=/full/path/to/amazon-elasticache-cluster-client.so" | sudo tee /etc/php5/apache2/conf.d/memcached.ini
That's it.
The only other gotchas are make sure you don't have php5-memcached already installed, and also make sure you're downloading the correct version of the Cluster Client tools for your system.
It appears that amazon-elasticache-cluster-client.so is suppose to replace memcached.so. You should remove extension=memcached.so and restart php.
Related
Can anyone help me install php-redis in MAC OSX .
brew install php-redis
not working.
pecl install php-redis
also not working getting -
invalid package name/package file "php-redis".
Homebrew Error:
homebrew_error
git clone https://www.github.com/phpredis/phpredis.git
cd phpredis
phpize && ./configure && make && sudo make install
Add extension=redis.so in your php.ini
brew services restart php#7.2
make test
You can check working or not
php -r "if (new Redis() == true){ echo \"\r\n OK \r\n\"; }"
As of 2019, with homebrew php7.2 and up, pecl is now installed by default alongside the php binaries.
To see this for yourself type which pecl.
Steps to install
Check your version of redis, then find a suitable version of the extension here.
If unfamiliar with pecl, type pecl to see the options.
Issue pecl install redis-5.0.2. (or your version). Enter no to each question asked if you're not sure.
If that succeeds check the new file it created at: /usr/local/lib/php/pecl/20180731/redis.so
The install will have added extension="redis.so" to top of your php ini.
Check that by opening the file /usr/local/etc/php/7.3/php.ini.
(assuming you're on 7.3 there)
brew services restart php.
php -i | grep Redis
Redis Support => enabled
Redis Version => 5.0.2
This is what I just did in September 2019 and it works for me.
If what mwal wrote above doesn't work (please try his/her answer first),
first, try to uninstall first (if you have it but broken):
sudo pecl uninstall redis
and after that run:
sudo pecl install redis
After that, ini the php.ini, use full path for the extension.
Mine was /usr/local/Cellar/php#7.3/7.3.21/pecl/20180731/redis.so (assuming you are using php#7.3)
so at the top of my php.ini file is like this:
extension="/usr/local/Cellar/php#7.3/7.3.21/pecl/20180731/redis.so"
Here are steps to use pickle, for PHP >= 7.3 (tested with 8.1):
brew install pickle
pickle install redis
Find your php.ini location via php -i|grep php.ini
Edit the php.ini, insert extension=redis. Preferable at Dynamic Extensions section.
No restart of Apache httpd service is required. You may test your PHP code with Redis
Bonus
If you use VS Code, to enable intellisense / auto complete, at Preference -> paste intelephense.stubs at Search setting box -> Add Item -> select redis.
If you got the following error,
Please make sure the PHP Redis extension is installed and enabled
despite doing everything in the verified answer above, try valet restart . It worked for me
I have tried all these solutions but didn't work for me for a while so I tried this link https://developer.redis.com/develop/php/ from the original docs and it works as charm
If someone gets an error during sudo pecl install redis
Warning: mkdir(): File exists in System.php on line 294
PHP Warning: mkdir(): File exists in /opt/homebrew/Cellar/-----/pear/System.php on line 294
that means you need to create the broken directory manually.
Try to create the directory...
pecl config-get ext_dir | pbcopy
mkdir -p {paste clipboard value}
# in my case, it was
mkdir -p /opt/homebrew/lib/php/pecl/20200930
Now try to install any pecl extensions.
sudo pecl install redis
After installing any extension, restart php
brew services restart php
Happy coding :)
I'm trying to connect to Mongolab db server, but I get this error:
Fatal error: Class 'MongoClient' not found in /home/viviane/public_html/sk/zizi/head.php on line 33
I suspect it is related to the PHP Mongo Driver, but I don't know how. If I try to connect to a remote mongodb server
$uri = "mongodb://dzyasser:dzyasser#ds049624.mongolab.com:49624/serverdb";
$options = array("connectTimeoutMS" => 30000);
$connection = new MongoClient($uri, $options );
So why am I still getting this error when I'm trying to connect to a remote Mongodb server (Mongolab)?
Its look like you don't have MongoDB PHP extension in your system.
Try to install MongoDB PHP extension in order to solve your problems with the MongoClient class. This is how I setup MongoDB PHP extension in OS X.
Get MongoDB extension from PECL
$ sudo pecl install mongodb
Make a copy of php.ini.default
$ sudo cp /etc/php.ini.default /etc/php.ini
Put this line on php.ini than save
extension=mongodb.so
Check the installation using this command
php --re mongodb
Or create simple php document that contain phpinfo() function
If you get problem with writing the extension, please read this post.
I assume, the Mongo driver is installed and loaded.
If so, since the error message says the MongoClient class cannot be found, it might be caused by a namespace used in your script. If so, try
$connection = new \MongoClient($uri, $options );
Regardless of whether you are connecting locally or remotely, it seems PHP requires the mongo DB service to be running on your server. So install it like so:
a) Install mongodb service
$ sudo apt-get install -y mongodb
b) Add the php drivers if they are missing:
$ sudo apt-get install php5-dev php5-cli php-pear -y
$ sudo pecl install mongo
c) Then open your php.ini file and add to it the extension line "extension=mongo.so":
$ sudo vi /etc/php5/apache2/php.ini
> extension=mongo.so
d) Then restart apache
$ sudo service apache2 restart
Disclaimer: This example was tried on Ubuntu 14.04 LTS with Apache web-service and PHP5 installed. If your installation is different, follow the same approach but issue appropriate commands. If you have no access to SSH or sudoer privileges, contact someone who can help you do this.
I tried to enable object cache for wordpress by using Memcache. And I put object-cache.php into /wp-content/, which I get from Memcached Object Cache plugin.
And then PHP Fatal error: Class 'Memcache' not found occurred. So I install memcache extension by executing sudo yum -y install php-pecl-memcache and sudo service httpd restart. But nothing changed.
I also tried to install php-pecl-memcached, not php-pecl-memcache. But nothing had changed.
I confirmed that /etc/php.d/memcache.ini file existed and extension=memcache.so is loaded in the file.
Please give me an advice to solve this.
When I tried that for new EC2 instance, it worked well. So I guess my environment is preventing in some ways. Any ideas?
fire the command
dpkg -l | grep php5
and check the packages installed. Check for php5-memcache and php5-memcached.
If not installed then install those
I'm using XAMPP Server 1.7.7
While opening the php file, i receive the error
Fatal error: Class 'XSLTProcessor' not found
Install the XSL extension to get that class. This might be as easy as uncommenting (remove the starting ';') on the line that reads extension=php_xsl.dll in php.ini on Windows, or apt-get install php5-xsl on most Linux-based systems. For custom builds of PHP, use configure option --with-xsl (requires package libxslt1-dev).
Its necessary install the XLS extension.
My solution by my context.
I'm using one docker container contain ubuntu base and using php-fpm (ie if you simply already use linux ubuntu in the same).
The steps to install this extension in my context were:
First search xsl extension on linux repository
sudo apt-cache search xsl
I ended up finding the php5-xsl, so it was only install
sudo apt-get install php5-xsl
that the installation process the setup configuration is already added, if does not happen, just make yourself
sudo vim /etc/php5/mods-available/xsl.ini
insert this content:
extension=xsl.so
(obviously the paths are according to your php configuration settings, but my example is the default configuration)
Restart you php fpm and done (sudo service php5-fpm restart)!
I'm having a terribly difficult time getting the command "pg_connect()" to work properly on my Mac. I'm currently writing a PHP script (to be executed from console) to read a PostgreSQL database and email a report.
I've gone into my php.ini file and added
extension=pgsql.so
But, I'm met with the following error.
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/extensions/no-debug-non-zts-20090626/php_pgsql.so' - dlopen(/usr/lib/php/extensions/no-debug-non-zts-20090626/php_pgsql.so, 9): image not found in Unknown on line 0
PHP Fatal error: Call to undefined function pg_connect() in... (blah file here)
When running phpinfo(), I see nothing about PostgreSQL, so what is my issue here?
The PHP version that comes bundled with OS X doesn't include PostgreSQL. You'll have to compile the extension yourself. Here are some instructions:
Find your version of PHP: php -v.
Download the version of PHP that matches yours: curl -O http://us.php.net/distributions/php-5.3.3.tar.gz. (This example downloads PHP 5.3.3 but this must match your version)
Extract the archive you downloaded: tar -xzvf php-5.3.3.tar.gz
Change to the PostgreSQL's extension directory: cd php-5.3.3/ext/pgsql/
Type phpize.
Type ./configure.
Type make.
Type sudo make install.
Add the extension to you php.ini file by adding extension=pgsql.so. (You may already have done this)
Restart Apache.
Update for OS X Mountain Lion
Apple has removed autoconf from the newer versions of XCode so the procedure above will fail at #5. To solve that problem:
Type /usr/bin/ruby -e "$(/usr/bin/curl -fksSL https://raw.github.com/mxcl/homebrew/master/Library/Contributions/install_homebrew.rb)".
Type sudo chown -R $USER /usr/local/Cellar.
Type brew update.
Type brew install autoconf.
That should install autoconf and allow you to install the module using the instructions above.
If you use home brew, you can solve this with a command as simple as:
brew install php55-pdo-pgsql
for other php version, search with:
brew search pgsql
This worked for me with OSX 10.9.4 «Mavericks»
Install sources
Download the PHP source code. Unlike on Mountain Lion, you don’t get any headers preinstalled to link against so need to put it in /usr/include/php. Mavericks ships with PHP 5.4.17, but the latest 5.4.x source from php.net should do:
tar -jxvf php-5.4.20.tar.bz2
sudo mkdir -p /usr/include
sudo mv php-5.4.20 /usr/include/php
Configure PHP
cd /usr/include/php
./configure --without-iconv
sudo cp /etc/php.ini.default /etc/php.ini
Building a module
I needed the pdo_pgsql module - the same pattern should apply to just about any module assuming you have the necessary dependencies installed:
cd ext/pdo_pgsql
In my case I had the following error:
Cannot find autoconf. Please check your autoconf installation and the
$PHP_AUTOCONF environment variable. Then, rerun this script. ERROR:
`phpize' failed
So I had to use this command:
brew install autoconf
Then:
phpize
After that I tried to do:
./configure
but I had the next problem:
checking for pg_config... not found configure: error: Cannot find
libpq-fe.h. Please specify correct PostgreSQL installation path
So the solution was to specify correct PostgreSQL installation path:
./configure --with-pdo-pgsql=/Library/PostgreSQL/9.3/
make
sudo make install
That copies pdo_pgsql.so to /usr/lib/php/extensions/no-debug-non-zts-20100525.
Then simply add
extension=pdo_pgsql.so to /etc/php.ini
Run php -m to confirm everything went to plan.
For those who installed php7/ngix/postgres with homebrew
You can install the PostgreSQL module with:
brew install php70-pdo-pgsql
After that, you have to restart the php service:
brew services restart php70
OS X El Capitan users can simply upgrade their version of PHP 5.6. This is a one liner that will do that.
curl -s http://php-osx.liip.ch/install.sh | bash -s 5.6
For php56 via brew:
brew install php56-pdo-pgsql
PostgreSQL by default is installed in a unusual place on MAC OS X:
/Library/PostgreSQL/9.3
Given the location above you can type this:
./configure --with-pgsql=/Library/PostgreSQL/9.3
I killed the whole day trying to make it work on El Capitan after I made an upgrade yesterday and it turned out that I forgot to modify httpd.conf and change the path from the default php module (version 5.5.27) to the one I installed (version 5.6.14). This should be done in httpd.conf by modifying your default LoadModule php5_module path to LoadModule php5_module /usr/local/opt/php56/libexec/apache2/libphp5.so.
Just decided to leave it here as the potential solution for those who upgrade their OS or just the PHP version and face the same problem.
For those of you having openssl error while make here is the solution
OSX uses openssl 0.98 while installer is searching for 1.0.0
refer this link for instructions
psycopg2 installation error - Library not loaded: libssl.dylib
I downloaded PostgreSQL for Mac, and used the stack builder after installation to standup the entire EnterpriseDB Apache/PHP stack end-to-end. I mention this as a possible time saving option, probably not ideal for all situations. Should work OK if the apache and postgres shipped with Mac OS X were never started.
To keep existing apache hosted applications (i.e. pre-PostgreSQL install legacy) stable, I would just install the newer EnterpriseDB apache on port 81 (stackbuilder will prompt for new port if legacy apache instance is already running). Then, use mod_proxy in httpd.conf for the apache running on port 80 to provide seamless user experience to applications hosted on PostgreSQL.