Hi I'm trying to setup an api service with Limoanywhere system. But regardless of what I do I get invalid ApiKey & ApiID. I went into the back system and changed the ApiKey & ApiId multiple times but still no success.
Can anyone tell me if my code is correct?
<?php
$client = new SoapClient('https://qa.book.mylimobiz.com/api/ApiService.asmx?wsdl');
$options = array(
'ApiKey' => '***api key here****',
'ApiID' => '***api id here****'
);
$result = $client->__soapCall('Test', $options);
//var_dump($client->__getFunctions());
print_r($result);
?>
Here is the snippet from the service
http://qa.book.mylimobiz.com/api/ApiService.asmx?op=Test
Here is the result I get from when run my php code.
Array ( [TestResult] => Array ( [ResponseCode] => 1 [ResponseText] => Invalid ApiId or ApiKey ) )
Check this instead of test Test function not working giving error but test of the test all function are working.
<?php
$soapClient = new SoapClient("https://book.mylimobiz.com/api/ApiService.asmx?wsdl");
// Prepare SoapHeader parameters
$sh_param = array('apiId' => 'xxxxxx','apiKey' => 'xxxxxxxxxxxx');
$headers = new SoapHeader('https://book.mylimobiz.com/api/ApiService.asmx?wsdl', 'GetVehicleTypes', $sh_param);
// Prepare Soap Client
$trans = $soapClient->GetVehicleTypes($sh_param)->GetVehicleTypesResult;
echo "<pre>"; print_r($trans);
?>
Related
I have tried to fix this issue but unable to do so. Field 'card_nonce' is not found on the server although it is recently created. I have used npm and node to generate a card_nonce.
Code Used:
$billing_address = new Address();
$billing_address->setAddressLine1('500 Electric Ave');
$billing_address->setAddressLine2('Suite 600');
$billing_address->setLocality('New York');
$billing_address->setAdministrativeDistrictLevel1('NY');
$billing_address->setPostalCode('10003');
$billing_address->setCountry('AU');
// $body = new CreateCustomerCardRequest($_POST['nonce']);
$body = new CreateCustomerCardRequest('CBASECw9ri-7s1THlCWDoSVsVY8');
$body->setBillingAddress($billing_address);
$body->setCardholderName('Gaurav Gulati');
$api_response = $customersApi->createCustomerCard($customer_id, $body);
if ($api_response->isSuccess()) {
$result = $api_response->getResult();
$customer_card = $api_response->getCard();
$customer_card_id = $customer_card->getId();
} else {
$errors = $api_response->getErrors();
}
Response:
[0] => Square\Models\Error Object
(
[category:Square\Models\Error:private] => INVALID_REQUEST_ERROR
[code:Square\Models\Error:private] => NOT_FOUND
[detail:Square\Models\Error:private] => Resource not found.
[field:Square\Models\Error:private] => card_nonce
)
Anyone has idea how to resolve this error.
You've removed the "cnon:" from the parameter. "CBASECw9ri-7s1THlCWDoSVsVY8" should be cnon:CBASECw9ri-7s1THlCWDoSVsVY8.
I am having trouble when trying to use my Livezilla chatbot script to talk to my REST API, both of which I have stored on my local PC. I am using a code snippet very similar from the Livezilla chatbot API page and have modified it, but I am getting some errors.
27.02.19 11:34:11 ::1 ERR# 129 Error connecting USER API, invalid response:
http://localhost/livezilla/programytalk.php (
Notice: Trying to get property 'answer' of non-object in
C:\xampp\htdocs\livezilla\programytalk.php on line 11
) IN LINE 0
the code for programytalk.php is as follows:
<?php
$requestobj = json_decode($_POST["livezilla_user_api_request"]);
$responseNode = array();
$responseNode["ResponseTo"] = "";
$responseNode["Id"] = rand(1111111,9999999);
$responseNode["SearchKB"] = false;
$url = "http://localhost:8989/api/rest/v1.0/ask? question=".rawurlencode($requestobj->Value)."&userid=".$requestobj-
>VisitorId;
$sdata = json_decode(file_get_contents($url));
$responseNode["Value"] = $sdata->answer;
if(!empty($responseNode["Value"]))
echo json_encode($responseNode);
?>
This is the JSON format the API responds in:
[{"response":{"answer":"Good morning.","question":"hello world","userid":"1234567890"}},200]
By that API response you don't need to read
$responseNode["Value"] = $sdata->answer;
instead of that you need to read
$responseNode["Value"] = $sdata[0]->response->answer;
because answer is nested under response...
Hint: just do this
$data = json_decode('[{"response":{"answer":"Good morning.","question":"hello world","userid":"1234567890"}},200]');
print_r($data);
and output will be:
Array
(
[0] => stdClass Object
(
[response] => stdClass Object
(
[answer] => Good morning.
[question] => hello world
[userid] => 1234567890
)
)
[1] => 200
)
Please do this;
<?php
$requestobj = json_decode($_POST["livezilla_user_api_request"]);
$responseNode = array();
$responseNode["ResponseTo"] = "";
$responseNode["Id"] = rand(1111111,9999999);
$responseNode["SearchKB"] = false;
$url = "http://localhost:8989/api/rest/v1.0/ask? question=".rawurlencode($requestobj->Value)."&userid=".$requestobj-
>VisitorId;
$sdata = json_decode(file_get_contents($url), true);
$responseNode["Value"] = $sdata->answer;
if(!empty($responseNode["Value"]))
echo json_encode($responseNode, true);
?>
I have been struggling for hours now on a SOAP connection and can't get it to work, this is what I have:
$url = 'https://xxx/connector.svc?singleWsdl';
$user = 'user';
$pass = 'pass';
$options = array(
'uri'=>'http://schemas.xmlsoap.org/soap/envelope/',
'style'=>SOAP_RPC,
'use'=>SOAP_ENCODED,
'soap_version'=>SOAP_1,
'cache_wsdl'=>WSDL_CACHE_NONE,
'connection_timeout'=>15,
'trace'=>true,
'encoding'=>'UTF-8',
'exceptions'=>true,
);
try {
$soapclient = new SoapClient($url, $options);
# $soapclient = new SoapClient($url);
}
catch(Exception $e) {
die($e->getMessage());
}
I tried '?wdsl' but then I get:
PHP Fatal error: SOAP-ERROR: Parsing WSDL: <message> 'IConnector_GetProduct_ServiceFaultFault_FaultMessage' already defined
A request with no parameters works fine:
$result = $soapclient->GetVersionInfo();
$last_request = $soapclient->__getLastRequest();
$last_response = $soapclient->__getLastResponse();
print "Request: ".$last_request ."\n";
print "Response: ".$last_response."\n";
print_r($result);
Result:
Request: <?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="Unit4.AgressoWholesale.Connectors"><SOAP-ENV:Body><ns1:GetVersionInfo/></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Body><GetVersionInfoResponse xmlns="Unit4.AgressoWholesale.Connectors"><GetVersionInfoResult xmlns:a="http://schemas.datacontract.org/2004/07/Unit4.AgressoWholesale.Common.Contracts" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><a:FullVersion>14.4.18.0</a:FullVersion><a:Release>14</a:Release><a:ServicePack>4</a:ServicePack><a:Fix>18</a:Fix><a:Version>0</a:Version><a:CustomCode/><a:AWBuild>38</a:AWBuild><a:AWFix>003</a:AWFix><a:AWCustomBuild/><a:AWCustomFix/><a:AWCustomCustomerCode/></GetVersionInfoResult></GetVersionInfoResponse></s:Body></s:Envelope>
stdClass Object
(
[GetVersionInfoResult] => stdClass Object
(
[FullVersion] => 14.4.18.0
[Release] => 14
[ServicePack] => 4
[Fix] => 18
[Version] => 0
[CustomCode] =>
[AWBuild] => 38
[AWFix] => 003
[AWCustomBuild] =>
[AWCustomFix] =>
[AWCustomCustomerCode] =>
)
)
So far so good, but the trouble begins trying to log in, which is a must.. In SoapUI it works with:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:unit="Unit4.AgressoWholesale.Connectors" xmlns:unit1="http://schemas.datacontract.org/2004/07/Unit4.AgressoWholesale.Common.Contracts">
<soapenv:Header/>
<soapenv:Body>
<unit:Login>
<unit:SecurityContext>
<unit1:SessionToken></unit1:SessionToken>
<unit1:UserId>user</unit1:UserId>
<unit1:Password>pass</unit1:Password>
</unit:SecurityContext>
</unit:Login>
</soapenv:Body>
</soapenv:Envelope>
But converting this to PHP, I'm stranding here.. this is what I have tried:
$data = array( 'SecurityContext' => array( 'SessionToken' => ''
,'Password' => $user
,'UserId' => $pass)
);
$data = array( 'SessionToken' => ''
,'Password' => $user
,'UserId' => $pass
);
$data = new stdClass;
$data->SecurityContext = new stdClass;
$data->SecurityContext->SessionToken = '';
$data->SecurityContext->UserId = $pass;
$data->SecurityContext->Password = $user;
#$result = $soapclient->__call('Login',array($data));
#$result = $soapclient->Login($data);
$result = $soapclient->__soapCall('Login',array($data));
But no matter what I try, event without parameters or an empty array or stdClass, I get:
PHP Fatal error: Uncaught SoapFault exception: [s:ServiceFault] An exception occurred
It's driving me nuts, I can't find anything on the internet about the fatal exeption '[s:ServiceFault]'
What am I doing wrong? Any help will be greatly appreciated!
OK, writing out the problem sometimes is enough to get to an anwer!
The solution was two-fold:
1) get better error reporting by using a try{} catch:
try {
$result = $soapclient->__call('Login',array($data));
#$result = $soapclient->Login($data);
#$result = $soapclient->__soapCall('Login',array($data));
} catch (SoapFault $e) {
$error = $e->faultcode;
echo str_replace('>',">\n",$error) ;
}
$last_request = $soapclient->__getLastRequest();
$last_response= $soapclient->__getLastResponse();
print "\nRequest: " .str_replace('>',">\n",$last_request);
print "\nResponse: ".str_replace('>',">\n",$last_response);
That way I got just that litle more information I needed! to:
2) enter password in the password field and the username in the user field
It works!
For those interested
Using the array structure and the 'new stdClass' both work
all three ways of parsing the call work (also the two commented out ones, use which one you like)
I need to connect to a SOAP Server from php, I read a lot of documentation, examples and tutorials, but I still cannot make authentication to my server. I have done the work below:
$agencyNumber = 7818619810;
$fullTransmission = false;
//$context = array('header' => 'Content-type: application/soap+xml; charset=utf-8');
$params = array( 'agencyNumber' => 7818619810, 'fullTransmission' => 0/*,$context*/);
$client = new SoapClient("http://link/to/server?wsdl");
$test = $client->__getFunctions();
var_dump($test );// returns the functions my supplier provides, as well __getTypes() gives a bunch of variable arrays ect..
$response = $client->__soapCall('GetTransmissionTicket',array($params) );//line 16 which is mentioned on error print
var_dump($response);
Even though I set $context, when I try to run, I get the error below:
Fatal error: Uncaught SoapFault exception: [HTTP] Cannot process the
message because the content type 'text/xml; charset=utf-8' was not the
expected type 'application/soap+xml; charset=utf-8'. in
C:\xampp\htdocs\xml\inc\connection_test.php:16 Stack trace: #0
[internal function]: SoapClient->__doRequest('http://interfac...', '..//my-provider...', 1, 0) #1
C:..path..test.php(16): SoapClient->__soapCall('GetTransmission...',
Array) #2 {main} thrown in C:..path..test.php on line 16
The remote method I'm trying to call is called GetTransmissionTicket which takes two parameters, (int)agencyNumber and fullTransmission(bool)..
I want to emphasize that there are a lot of threads on this topic, some of which are really close to my question(1, 2, 3 and so on ..), but I really couldn't solve the problem. Please give a hand..
Kind Regards..
Try $params = array( 'agencyNumber' => 7818619810, 'fullTransmission' => false);
instead of $params = array( 'agencyNumber' => 7818619810, 'fullTransmission' => 0);
OR
Use $client = new SoapClient("http://link/to/server?wsdl", array('soap_version' => SOAP_1_1));
because
application/soap+xml is the content-type passed when using SOAP 1.2, text/xml is used with SOAP 1.1,
Reference : how to change content-type of request?
A simple example with soap and php can be
$url="your WSDL url";
$method = "Method you are calling";
$error=0;
$client = new SoapClient($url);
try
{
$info = $client->__call($method, array($param));
}
catch (SoapFault $fault)
{
$error = 1;
errorReport($fault->faultcode,$fault->faultstring);
die;
/*echo '<script type="text/javascript">alert("Sorry,App Returne the following ERROR:'.$fault->faultcode."-".$fault->faultstring.' We will now take you back to our homepage."); window.location = "'.$_SERVER['PHP_SELF'].'";</script> '; */
}
if($error==1)
{
$xml=$fault->faultstring;
}else{
$xml = $info;
}
return $xml;
Try implementing it and let me know. if it works for you.
Shouldn't the last line be var_dump($response); instead of var_dump($client);
Anyways, you can also try using this to get the result :
$response = $client->GetTransmissionTicket(array($params) );
var_dump($response);
I resolved this problem by switching from SOAP 1.2 to SOAP 1.1:
$this->client = new SoapClient(
$url,
array(
"trace" => TRUE,
"exception" => 0,
"soap_version" => SOAP_1_1,
"cache_wsdl" => WSDL_CACHE_MEMORY,
"local_cert" => 'mycert.pem',
)
);
I will answer my own question so that it helps someone one day. I used nusoap and changed the encoding to utf-8. The code snippet is below:
require_once "nusoap.php";
$client = new nusoap_client("http://interface.--Serivce-Supplier-Link/Service.svc?wsdl", "wsdl");
$client->soap_defencoding = 'UTF-8';
$result = $client->call("GetTransmissionTicket", array( 'agencyNumber' => 13155, 'fullTransmission' => false));
var_dump($result);
Kind Regards
may be little late but could help others. so here it goes:
$params is already an array so you don't have to use array($params) in
$response = $client->__soapCall('GetTransmissionTicket',array($params) );
instead use simple $params while calling.check it like this
$response = $client->GetTransmissionTicket($params);
also use $client->__getTypes(); to verify params to be passed.
use catch to good effect to trace faultstringand faultactor.
at the end if still not getting solution check it with soapUI(a software).
I am working on the Amazon API. I want to submit the product feed on amazon account.
I have validated the XML file (product feed) by the Amazon Scratch Pad and i get the Response that Feed is submitted but when i run the script, to submit the same feed by script, i don't get any response.
Here is my code :
$req = new MarketplaceWebService_Model_SubmitFeedRequest();
$req->setMerchant(MERCHANTID);
$req->setMarketplaceIdList(MARKETPLACEID);
$req->setFeedType('_POST_PRODUCT_DATA_');
$req->setContentMd5(base64_encode(md5(stream_get_contents($fh), true)));
rewind($fh);
$req->setPurgeAndReplace(true);
$req->setFeedContent($fh);
$res = $mws->submitFeed($request);
echo $res;
I am unable to get the response, when i echo the $res.
I have changed the $res = $mws->submitFeed($request); to $res = $mws->submitFeed($req);. Still no success in submitting the feed. I am not getting any response header that Amazon return while submitting the feed.
The code is like this :
$req = new MarketplaceWebService_Model_SubmitFeedRequest();
$fh = fopen('feed.xml', 'r');
$req->setMerchant(MERCHANTID);
$req->setMarketplaceIdList(MARKETPLACEID);
$req->setFeedType('_POST_PRODUCT_DATA_');
$req->setContentMd5(base64_encode(md5(stream_get_contents($fh), true)));
rewind($fh);
$req->setPurgeAndReplace(true);
$req->setFeedContent($fh);
$res = $mws->submitFeed($req);
echo $res;
Apart from other things that might go wrong: You are submitting $request, while the thing you probably want to submit is $req.
Edit: Since you corrected this mistake but still have no result...:
submitFeed() returns a MarketplaceWebService_Model_SubmitFeedResponse object.
Echo does not work with objects, unless the object has a __toString() method, which this class doesn't. Try using print_r($res) or var_dump($res) instead.
Try this
$marketplaceIdArray = array("Id" => array($MARKETPLACE_ID));
$feedHandle = #fopen('php://temp', 'rw+');
fwrite($feedHandle, $feed);
rewind($feedHandle);
$parameters = array(
'Merchant' => $MERCHANT_ID,
'MarketplaceIdList' => $marketplaceIdArray,
'FeedType' => '_POST_PRODUCT_DATA_',
'FeedContent' => $feedHandle,
'PurgeAndReplace' => false,
'ContentMd5' => base64_encode(md5(stream_get_contents($feedHandle), true))
);
rewind($feedHandle);
$request = new MarketplaceWebService_Model_SubmitFeedRequest($parameters);
$return_feed = invokeSubmitFeed($service, $request);
fclose($feedHandle);