stack: PHP 5.4.23, php-fpm, nginx 1.4.x, centos 6.5
I was trying to install xdebug, had to run phpize command.
I have php5-devl already installed and pecl command works
When I ran the command, it gave me the following error output:
# phpize
Can't find PHP headers in /usr/include/php
The php-devel package is required for use of this command.
How to fix this error?
I think you have not installed php-pear . I am not seeing it in that link.
You can do it by yum install php-pear
Info
You can install xdebug also using these steps
1) Install PHP’s devel package for PHP commands execution
yum install php-devel
Make sure you also have php-pear package installed
yum install php-pear
2) Install GCC and GCC C++ compilers to compile Xdebug extension yourself.
yum install gcc gcc-c++ autoconf automake
3) Compile Xdebug
pecl install Xdebug
4) Find the php.ini file using
`locate php.ini`
And add the following line
[xdebug]
zend_extension="/usr/lib64/php/modules/xdebug.so"
xdebug.remote_enable = 1
5) Restart Apache
service httpd restart
6) Test if it works – create test.php with the following code
<?php phpinfo(); ?>
The problem got solved by the PHP version that is used in the system.
My PHP Version was 5.6
So by running the following command I solved the problem
yum install php56-devel
Where "56" is your version of PHP.
If you're on PHP 7 such as in my case just installing php-devel won't solve your problems, but you'll need to install some additional packages:
yum install php-devel pcre-devel gcc make
And then you'll be able to follow Harikrishnan steps to get xdebug working (if not yet configured).
My problem hasn't been solved using
yum install php-devel
But this helped me to solve the problem:
yum --enablerepo=remi,remi-php55 install php55-php-devel
Related
I have been meaning to install ffmpeg as an extension to my PHP setup. So before I can install it, I need to phpize it. I installed php5-dev by sudo apt-get install php5-dev. But now when I run phpize I get the following error :
phpize
Cannot find config.m4.
Make sure that you run '/usr/bin/phpize' in the top level source directory of the module
The location of my php.ini is /usr/local/zend/etc/php.ini
From another online resource I tried this
sudo apt-get install autoconf automake libtool m4
But all of them are already installed.
Locate config.m4 didn't return anything.
Any pointers here how I can get phpize and thus, ffmpeg up and running?
For recent versions of Debian/Ubuntu (Debian 9+ or Ubuntu 16.04+) install the php-dev dependency package, which will automatically install the correct version of php{x}-dev for your distribution:
sudo apt install php-dev
Older versions of Debian/Ubuntu:
For PHP 5, it's in the php5-dev package.
sudo apt-get install php5-dev
For PHP 7.x (from rahilwazir comment):
sudo apt-get install php7.x-dev
RHEL/CentOS/yum
yum install php-devel # see comments
For PHP7 Users
7.1
sudo apt install php7.1-dev
7.2
sudo apt install php7.2-dev
7.3
sudo apt install php7.3-dev
7.4
sudo apt install php7.4-dev
If not sure about your PHP version, simply run command php -v
Ohk.. I got it running by typing /usr/bin/phpize instead of only phpize.
Under Redhat Enterprise / CentOS, use yum to install the php-devel module:
yum install php-devel
For PHP 7, you need:
yum install php70-php-devel
Step - 1: If you are unsure about the php version installed,
then first run the following command in terminal
php -v
Output: the above command will output the php version installed on your machine, mine is 7.2
PHP 7.2.3-1ubuntu1 (cli) (built: Mar 14 2018 22:03:58) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies
with Zend OPcache v7.2.3-1ubuntu1, Copyright (c) 1999-2018, by Zend Technologies
Step 2: Then to install phpize run the following command, Since my php version is 7.2.3. i will replace it with 7.2, so the command will be,
sudo apt-get install php7.2-dev
Step 3: Done!
Alternate method(Optional):
To automatically install the phpize version based on the php version installed on your machine run the following command.
sudo apt-get install php-dev
This command will automatically detect the appropriate version of php installed and will install the matching phpize for the same.
Hmm... actually i dont know how this solved it? But the following steps solved it for me:
find / -name 'config.m4'
Now look if the config.m4 is anywhere in a folder of that stuff you want to phpize. Go to that folder and run phpize directly in there.
For ubuntu 14.04LTS with php 7, issue:
sudo apt-get install php-dev
Then install:
pecl install memcache
In Ubuntu 16.04, you can install phpize with the command
aptitude install php7.1-dev // for php 7.1
which is equivalent to
apt-get install php7.1-dev // for php 7.1
If you're having problems with phpize not found on CentOS7.x after you have installed the relevant devel tools for your version/s of PHP, this path finally worked for me:
For PHP 7.2.x
/opt/cpanel/ea-php72/root/usr/bin/phpize
For PHP 7.3.x
/opt/cpanel/ea-php73/root/usr/bin/phpize
For PHP 7.4.x
/opt/cpanel/ea-php74/root/usr/bin/phpize
Run this in your folder containing the downloaded PHP extension, for example in line 3 below:
Example based on installing the PHP v7.3.x Brotli Extension from https://github.com/kjdev/php-ext-brotli
git clone --recursive --depth=1 https://github.com/kjdev/php-ext-brotli.git
cd /php-ext-brotli
/opt/cpanel/ea-php73/root/usr/bin/phpize
./configure --with-php-config=/opt/cpanel/ea-php73/root/usr/bin/php-config
make
make test
Install from linux terminal
sudo apt-get install <php_version>-dev
Example :
sudo apt-get install php5-dev #For `php` version 5
sudo apt-get install php7.0-dev #For `php` version 7.0
Of course in PHP7.2
sudo apt-get install php7.2-dev
This might help someone on ubuntu. No promises.
sudo apt-get install libcurl3 php5-dev libcurl4-gnutls-dev libmagic-dev
sudo apt-get install php-http make
sudo pecl install pecl_http
And adding "extension=http.so" to php.ini (Normally located at /etc/php5/apache2/php.ini)
Then restart Apache (sudo service apache2 restart).
If in doubt, check your apache logs:
sudo su --
cd /var/log/apache2
tail -25 error.log
Is http.so starting or failing?
For instance, if you wanted to use the "phpize" command for PHP 5.6, you would use the full path:
Code:
/opt/cpanel/ea-php56/root/usr/bin/phpize
For ubuntu with Plesk installed run apt-get install plesk-php56-dev, for other versions just change XX in phpXX (without the dot)
Go to the downloaded folder and there you find config.m4. Open the terminal and run phpsize.
I had this exact problem on macOS in 2018.
For me, first running brew install php before sudo pecl install mongodb did the trick.
You didn't specify what operating system you're using, and 90% of the answers assume Ubuntu/Debian Linux because of the apt-get install autoconf automake libtool m4 command that you posted (and over half expect you to be running CPanel), so I'm giving you a slightly more generic solution which ought to work on any Un*x clone (including Microsoft's WSL!).
You will need at least a few prerequisites:
A working C/C++ compiler — GCC or clang being the most popular options these days.
A 'developer edition' of PHP, which some package managers call 'development headers'. In the case of aptitude, as shown on the other answers, you ought to be fine with just sudo apt install php-dev. Beware of the mentioned caveats: you might end up with a slightly more unstable version of PHP which might not be updated correctly with future versions.
These days (that's late 2021 for me!), for those running Ubuntu, and wishing to seriously tinker with PHP, the recommendation is to use Ondřej Surý's personal package archive for PHP. Ondřej keeps his PPA always up to date, sometimes within a few hours after release; he keeps up with the latest four Ubuntu distributions and all the currently supported PHP versions that haven't reached end-of-life status yet (sorry, PHP5 is considered completely obsolete and plagued with unpatched bugs and security issues, so it's not supported — for very good reasons!); and he provides a lot of PHP extensions, too. Sadly, ffmpeg-php is not one of them...
There is a good reason for the overall lack of support of ffmpeg-php. Allegedly, the original repository for that was hosted at Sourceforge but has been abandoned in 2007. The recommended package these days is PHP-FFMpeg which is constantly being updated, and ought to be easily installed using composer — get it before starting your compilation!
Alternatively, instead of relying on an external non-official PHP extension (albeit one that is both popular and updated regularly!), you ought to launch the ffmpeg binary using shell_exec(). This is the officially recommended approach, mostly because converting videos always takes a long time, and the authors of that recommendation suggest a simple architecture where the PHP script basically launches ffmpeg in the background, accepting batches of videos for processing. The page is a bit old, but the technique shown is sound.
I am using XAMPP on Linux mint and it is by default installed if your don't have
sudo apt-get install php7.0-dev
// or
sudo apt-get install php-dev
know more
I am trying to install xdebug with pecl install xdebug on PHP 5.5.27
According to PECL website https://pecl.php.net/package/xdebug latest stable version of xdebug is 2.3.3
However command above is trying to install xdebug 2.3.2
What is wrong with this?
When using pecl program to install a package, you can install a specific version, or upgrade to a specific version:
pecl install xdebug-2.3.3
Even if it's not the case here if one needs to downgrade a package, the force (-f) option may be required to make it work:
pecl install -f xdebug-2.3.3
You need to download it manually:
wget http://xdebug.org/files/xdebug-2.3.3.tgz
tar -xvzf xdebug-2.3.3.tgz
cd xdebug-2.3.3
phpize
./configure
make
If you are running a tool like homestead you won't need further steps and do not forget to take backup before steps below.
cp modules/xdebug.so /usr/lib/php5/20131226
Update /etc/php5/fpm/php.ini
zend_extension = /usr/lib/php5/20131226/xdebug.so
Restart the webserver
I want to install the v8js extension for PHP5.5 on Ubuntu 12.04 but can't make it working.
When I try to install the v8js extension version 0.2.0 (latest) with PECL, I have this message:
configure: error: libv8 must be version 3.24.6 or greater
ERROR: `/tmp/pear/temp/v8js/configure --with-v8js' failed
If I try to install an old version, I have a compilation error. This message is very similar to my issue: Install v8js for php on ubuntu
How can I fix this issue?
EDIT: I couldn't install it on Ubuntu 14.04 with PHP5.5, even with a PHP downgrade with PHPbrew to PHP 5.4. However, using Ubuntu 12.04 with PHP 5.4 works great. I didn't try the downgrade from PHP 5.5 to 5.4 on Ubuntu 12.04.
in case you can't find libv8-dev or libv8-dbg, you can find the correct version by run command
~$ apt-cache search libv8
libv8-3.14-dbg - V8 JavaScript engine - debugging symbols
libv8-3.14-dev - V8 JavaScript engine - development files for 3.14 branch
libv8-3.14.5 - V8 JavaScript engine - runtime library
libv8-dev - V8 JavaScript engine - development files for latest branch
then you can run
~$ sudo apt-get install libv8-3.14-dev libv8-3.14-dbg g++ cpp
then you can try to install v8js via pecl by running
~$ sudo pecl install v8js-0.2.0
if that command return error like this
configure: error: libv8 must be version 3.24.6 or greater
ERROR: `/tmp/pear/temp/v8js/configure --with-v8js' failed
you can try to install v8js-0.1.3 instead by running
~$ sudo pecl install v8js-0.1.3
then edit your php.ini to add v8js extension
~$ echo "extension=v8js.so" >> /etc/php5/cli/php.ini
Open your terminal/console
sudo apt-get install libv8-dev libv8-dbg g++ cpp
Make an update sudo apt-get update
Try sudo pecl install v8js-0.2.0 (or other version i.e.: sudo pecl install v8js-0.1.3)
Edit your php.ini (Check: Where is my php.ini file?) file by adding: extension=v8js.so.
Restart server
If it the extension still doesn't work, try to edit /etc/php5/conf.d/v8js.ini and add extension=v8js.so and restart server again.
Hope this helps.
These other answers work well and I used v8js-0.1.3 for the past 1.5 years but after needing to upgrade to PHP 7 I needed a better solution as v0.1.3 doesn't compile with PHP 7 (something to do with php_smart_str being renamed to php_smart_string).
After a couple hours of frustrating research and compiling libv8 myself, I didn't want to have to go through this whole process on every server I provisioned.
Anyway, I found this site which points you to a launchpad PPA site that provides a couple different ubuntu packages with the 5.1 and 5.2 libv8 libraries.
I ran these commands (please don't add repositories of 3rd party devs without understanding the risks).
sudo apt-add-repository ppa:pinepain/libv8-5.2
sudo apt-get update
sudo apt-get install libv8-5.2-dev
sudo pecl install v8js-1.1.0
(Thanks #JeyKeu for suggesting to add "apt-get update" to these commands)
I couldn't get v8js-1.3.0 or 1.2.0 to build, but 1.1.0 worked well. I checked the changelog and found that the latest updates are not necessary in my circumstance anyway.
I'm trying to install the php_http PHP extension on my CentOS server.
I have done:
yum install php-pear
But get:
No package php-pear available
Yet I can do:
pear
And get a list of commands from Pear.
Same for yum install pecl. I can do pecl but pecl install pecl_http returns:
No releases available for package "pecl.php.net/pecl_http"
install failed
Yet /usr/bin/pecl isn't a directory that exists. Also a sudo pecl install pecl_http returns sudo: pecl: command not found, which I find quite odd.
I'm not entirely sure what's going on here/what I'm doing wrong.
edit: I am using the following repos:
base CentOS-6 - Base
epel Extra Packages for Enterprise Linux 6 - x86_64
extras CentOS-6 - Extras
rpmforge RHEL 6 - RPMforge.net - dag
updates CentOS-6 - Updates
vz-base vz-base
vz-updates vz-updates
On CentOS,
Install PHP Pear if not installed yet:
# yum install php-pear
Install GCC if not installed yet:
# yum install gcc
Install cURL if not installed yet:
# yum install curl-devel
Install following libraries if not installed yet:
# yum install php-devel
# yum install zlib-devel
# yum install pcre-devel
Start the main installation:
# pecl install pecl_http
Add the following line to /etc/php.ini file
extension=raphf.so
extension=propro.so
extension=http.so
Restart apache server so the extension can be loaded
# service httpd restart
You can check if it installed successfully or not:
# pecl list
Step 1) import the REMI repo
CentOS 5
rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm;
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-5.rpm;
CentOS 6
rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm;
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm;
Step 2) install php-pear
yum --enablerepo=remi,remi-php55 install php-pear
Step 3) install pecl_http
pecl install pecl_http
For other people having this problem. I discovered this question while trying to figure out why I was having the same problem. Turned out the default configuration at my hosting provider was to include php* in the exclude directive for yum. Check /etc/yum.conf and make sure that the package you're trying to install isn't matched by an entry in the exclude directive.
if you are running php 7 you might want to try this
yum install php70w-pear
if you get any errors, be sure to uninstall the pear package from any previous attempts
yum remove php-pear
best of luck
If you are using php 5.4.x, IMO best repo to use is iuscommunity. Its very stable and used by Rackspace to do only PHP and a few other packages for CentOS.
rpm -Uhv http://dl.iuscommunity.org/pub/ius/stable/CentOS/6/x86_64/ius-release-1.0-11.ius.centos6.noarch.rpm
yum install php54-pear
Mind you, the reason why its php54-pear and not php-pear is because 5.3 and 5.4 both are compiled in the repository. Here is the list of php packages -> http://dl.iuscommunity.org/pub/ius/stable/CentOS/6/x86_64/repoview/development.languages.group.html
I tested this and it works, but I only use EPEL and iuscommunity REPO's. I avoid using rpmforge myself.
Centos 6.5 and php7:
sudo su -
yum install yum-utils
you can get last version of lua : http://pecl.php.net/package/lua
wget http://pecl.php.net/get/lua-2.0.4.tgz
tar -xvzf lua-2.0.4.tgz
cd lua-2.0.4
mkdir /usr/include/lua
mv * /usr/include/lua
yum install gcc
yum install php70w-pearl php70w-devel
yum install curl-devel
yum install zlib-devel
yum install pcre-devel
ln -s /usr/include/lua.h /usr/include/lua/lua.h
rpm -Uvh https://centos6.iuscommunity.org/ius-release.rpm
yum-config-manager --enable remi-php70
yum update
yum --enablerepo=remi,remi-php70 install php70w-pear
yum install lua-devel lua-static
pecl install lua-2.0.4
Whatever your PHP provider is (IUS, Remi or Webtatic), the pear package and the pecl extensions "should" be available there, without any need to compile it from sources (which is usually discouraged, especially on production)
At least "remi" provides most extensions, see the list
So installation should be as simple as
yum install php-pecl-http
yum install php-pecl-lua
etc
And, don't forget to read the Wizard instructions
I tried almost everything on this list before I finally realized that my WHM/cPanel installation was blocking the yum packages. I have to install all PECL modules (I was stuck trying to install mongodb on this particular occation) through the Home > Software > Module Installers inside WHM (cpanel documentation says that you have to be logged in as root).
After watching a lot of threads and installing pear and all the devtool, I finally solved it installing this extension:
yum install php-pecl-mongo
as I seen in - https://madcoda.com/2012/12/install-mongodb-php-driver-in-centos-6-3/
I've found an error on a page in my Magento application; it always show this message error when I visit it:
Fatal error: Class 'DOMDocument' not found in /home/.../lib/Zend/Feed/Abstract.php on line 95
Can you give me a solution? I'm using magento 1.4.1.1.
You need to install the DOM extension. You can do so on Debian / Ubuntu using:
sudo apt-get install php-dom
And on Centos / Fedora / Red Hat:
yum install php-xml
If you get conflicts between PHP packages, you could try to see if the specific PHP version package exists instead: e.g. php53-xml if your system runs PHP5.3.
PHP 8.2
Ubuntu: apt-get install php8.2-xml
CentOS 8 [with php:remi-8.2 enabled]: dnf install php-xml
PHP 8.1
Ubuntu: apt-get install php8.1-xml
CentOS 8 [with php:remi-8.1 enabled]: dnf install php-xml
PHP 8.0
Ubuntu: apt-get install php8.0-xml
CentOS 8 [with php:remi-8.0 enabled]: dnf install php-xml
PHP8: (latest version)
sudo apt-get install php8.0-xml
PHP7:
sudo apt-get install php7.1-xml
You can also do:
sudo apt-get install php-dom
and apt-get will show you where it is.
Package php-dom is a virtual package provided by:
php7.1-xml 7.1.3+-3+deb.sury.org~xenial+1
php7.0-xml 7.0.17-3+deb.sury.org~xenial+1
php5.6-xml 5.6.30-9+deb.sury.org~xenial+1
You should explicitly select one to install.
In case anyone using 5.6 versions then go with this way
sudo apt-get install php5.6-xml
For PHP ver PHP7, Ubuntu:
sudo apt-get install php7.1-xml
or by
yum install php-xml
I'm using Centos and the followings worked for me , I run this command
yum --enablerepo remi install php-xml
And restarted the Apache with this command
sudo service httpd restart
After a long time suffering from it in PHPunit...
For those using namespace, which is very common with Frameworks or CMS, a good check in addition to seeing if php-xml is installed and active, is to remember to declare the DOMDocument after the namespace:
namespace YourNameSpace\YourNameSpace;
use DOMDocument; //<--- here, check this!
Create an empty PHP file and put only <?php phpinfo(); in it, look at it in a browser.
Check if you can spot --disable-dom in the configuration options and/or if you can see details about the DOM extension in the list below.
If you cannot see DOM in the list or you see it is disabled, your PHP installation does not include the DOM extension. You'll need to recompile your PHP installation from source to remedy that.
In my case the problem was it was the use of namespace at the top of php file, exemple :
namespace MediaWiki\Extensions\ParserFunctions;
To solve this problem add the following line:
use DOMDocument;
So no need of installing dom or xml if they are already installed. It is a php language trap.
This help for me (Ubuntu Linux) PHP 5.6.3
sudo apt-get install php5.6-dom
Thats work for me.
For PHP 7.4 Install the DOM extension.
Debian / Ubuntu:
sudo apt-get update
sudo apt-get install php7.4-xml
sudo service apache2 restart
Centos / Fedora / Red Hat:
yum update
yum install php74w-xml
systemctl restart httpd
For previous PHP releases, replace with your version.
Using Suse Linux (Linux linux 3.16.7-48-default) and PHP 5.6.1 as root, this helped:
zypper in php5-dom
plus restart
systemctl restart apache2
On fedora 26:
dnf install php-dom
Fixes it !
If compiling from source with --disable-all then DOMDocument support can be enabled with
--enable-dom
Example:
./configure --disable-all --enable-dom
Tested and working for Centos7 and PHP7
I'm using CentOS 7 with virtualmin and three PHP versions. I also have REMI repo enabled. it worked for me:
Step 1:
Just append PHP major version number like this php{version number}-xml. And run yum install
yum install php70-php-xml
yum install php71-php-xml
yum install php72-php-xml
Step 2:
Don't forget to restart Apache:
service httpd restart
On a Amazon Linux 2 with PHP 8.0, I had to
yum-config-manager --enable remi-php80
yum install php-xml
Do not forget to restart PHP
systemctl restart php-fpm
For Centos 7 and php 7.1:
yum install php71w-xml
apachectl restart
If you are using PHP7.0 to install Magento, I suggest to install all extensions by this command
sudo apt-get install php7.0 php7.0-xml php7.0-mcrypt php7.0-curl php7.0-cli php7.0-mysql php7.0-gd libapache2-mod-php7.0 php7.0-intl php7.0-soap php7.0-zip php7.0-bcmath
I need to Google some times to meet Magento requirement.
I think you can replace the PHP version to 7.x if you use another PHP version
And restart Apache is needed to load new extensions
sudo service apache2 restart
PHP 7.X Centos 7
I got dependency issues when trying to install module with above suggestions, adding this flag:
--enablerepo=remi-php7X
Resolved dependencies.
So
sudo yum --enablerepo=remi-php7X install php-xml
Then
service httpd restart
Ref:
Install PHP Modules
this is the lastest for php v 8.0
sudo apt-get install php8.0-xml