Related
I have installed php7.4 via RHEL8's Default Stream using dnf.
I want to install the php's ssh2 module.
How do I install Pyrus (Pear2 Package Manager) on RHEL8 with php7.4?
When I tried: php pyrus.phar
I got the error message in command prompt: Could not open input file: pyrus.phar
I used:
updatedb
locate pyrus
Got nothing
So, what is the issue here?
Best Regards
Thayalan
I wanted to install php's ssh2 extension via Pyrus but I was having trouble with Pyrus. Therefore, I tried it without Pyrus. I preferred yum or dnf installation throughout. But, it was not possible for some. The following are how I have installed ssh2:
yum install make gcc php-devel php-pear
libssh2 package (ssh2 package needs it) installed by downloading the file https://libssh2.org/download/libssh2-1.10.0.tar.gz into an appropriate folder.
Then, I entered the following commands:
tar -zxvf libssh2-1.10.0.tar.gz
cd libssh2-1.10.0
./configure
make
make install
ssh2 package installed by downloading the file https://pecl.php.net/get/ssh2-1.3.1.tgz into an appropriate folder.
Then, I entered the following commands:
tar -zxvf ssh2-1.3.1.tgz
cd ssh2-1.3.1
phpize
./configure
make
make test
make install
Then I entered the following entry into /etc/php.ini: extension=ssh2.so
After that, I restarted php by: systemctl restart php-fpm
And now, php's ssh2 extension has been successfully installed.
Using the CakePHP docs, I am trying to install 3.0-beta2 using composer but I got this error:
cakephp/cakephp 3.0.x-dev requires ext-intl * -> the requested PHP extension intl is missing from your system
However, I know for sure that intl is installed (it shows on phpinfo). I'm using PHP 5.4.33/Apache 2.4.10.1
I faced the same problem today. You need to enable the intl PHP extension in your PHP configuration (.ini).
Solution Xampp (Windows)
Open /xampp/php/php.ini
Change ;extension=php_intl.dll to extension=php_intl.dll (remove the semicolon)
Copy all the /xampp/php/ic*.dll files to /xampp/apache/bin
Restart apache in the Xampp control panel
Solution Linux (thanks to Annamalai Somasundaram)
Install the php5-intl extension sudo apt-get install php5-intl
1.1. Alternatively use sudo yum install php5-intl if you are on CentOS or Fedora.
Restart apache sudo service apache2 restart
Solution Mac/OSX (homebrew) (thanks to deizel)
Install the php5-intl extension brew install php56-intl
If you get No available formula for php56-intl follow these instructions.
Restart apache sudo apachectl restart
Eventually you can run composer install to check if it's working. It will give an error if it's not.
I faced the same issue in ubuntu 12.04
Installed: sudo apt-get install php5-intl
Restarted the Apache: sudo service apache2 restart
OS X Homebrew (May 2015):
The intl extension has been removed from the main php5x formulas, so you no longer compile with the --enable-intl flag.
If you can't find the new package:
$ brew install php56-intl
Error: No available formula for php56-intl
Follow these instructions: https://github.com/Homebrew/homebrew-php/issues/1701
$ brew install php56-intl
==> Installing php56-intl from homebrew/homebrew-php
When using MAMP
1 Go to terminal
vim ~/.bash_profile
i
export PATH=/Applications/MAMP/bin/php/php5.6.2/bin:$PATH
Change php5.6.2 to the php version you use with MAMP
Hit ESC,
Type :wq,
hit Enter
source ~/.bash_profile
which php
2 Install Mac Ports
https://www.macports.org/install.php
sudo port install php5-intl OR sudo port install php53-intl
cp /opt/local/lib/php/extensions/no-debug-non-zts-20090626/intl.so /Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/
{take a good look at the folder names that u use the right ones}
3 Add extension
Now, add the extension to your php.ini file:
extension=intl.so
Usefull Link:
https://gist.github.com/irazasyed/5987693
The error message clearly states what the problem is. You need the intl extension installed.
Step 1: install PHP intl you comfortable version
$sudo apt-get install php-intl
step 2:
For XAMPP Server intl extension is already installed, you need to enable this extension to uncomment below the line in your php.ini file. Php.ini file is located at c:\xampp\php\php.ini or where you have installed XAMPP.
Before uncomment:
;extension=php_intl.dll ;extension=php_mbstring.dll
After uncommenting:
extension=php_intl.dll extension=php_mbstring.dll
Short answer: activate intl extension in php_cli.ini. Thanks to #ndm for his input.
If you are using latest version Ubuntu 16.04 or later just do
sudo apt-get install php-intl
Then restart your apache
sudo service apache2 restart
In my case I was not actually trying to run cakephp locally, I was just trying to get it to auto update locally using composer (because I am playing with writing plugins that you install with composer). Since I don't actually even run it locally I could simply ignore requirements by adding the --ignore-platform-reqs flag.
php composer.phar update --ignore-platform-reqs
In my case, my running php version is 7.1.x on mac OSX .
I installed intl command using brew install php71-intl.
Placing extension=intl.so inside php.ini was no effect at all. Finally i looked for extension installed directory and there i saw intl.so and placed that path (extension=/usr/local/Cellar/php71-intl/7.1.11_20/intl.so) to my php.ini file and it solved my problem.
In my case (xampp PHP 8.0)
Find ;extension=intl in /xampp/php/php.ini
Remove ; and Restart Apache
MAKE this
In XAMPP, intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
In WAMP, the intl extension is “activated” by default but not working. To make it work you have to go to php folder (by default) C:\wamp\bin\php\php{version}, copy all the files that looks like icu*.dll and paste them into the apache bin directory C:\wamp\bin\apache\apache{version}\bin. Then restart all services and it should be OK.
if you use XAMPP do this
1. turn off XAMPP
2. Modifed the php.ini is located in c/:xampp/php/php.ini
3. intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
For Ubuntu terminal:
Please follow the steps:
Step-1:
cd ~
Step -2: Run the following commands
sudo apt-get install php5-intl
Step -3: You then need to restart Apache
sudo service apache2 restart
For Windows(XAMPP) :
Find the Php.ini file:
/xampp/php/php.ini
Update the php.ini file with remove (;) semi colon like mentioned below:
;extension=php_intl.dll to extension=php_intl.dll
and save the php.ini file.
After that you need to
Restart the xampp using xampp control.
Intl Means :Internationalization extension which enables programmers to perform UCA-conformant collation and number,currency,date,time formatting in PHP scripts.
To enable PHP Intl with PECL can be used.
pecl install intl
On a plain RHEL/CentOS/Fedora, PHP Intl can be install using yum
yum install php-intl
On Ubuntu, PHP Intl can be install using apt-get
apt-get install php5-intl
Restart Apache service for the changes to take effect.
That's it
For those who get Package not found error try sudo apt-get install php7-intl then run composer install in your project directory.
I had the same problem in windows
The error was that I had installed several versions of PHP and the Environment Variables were routing to wrong Path of php see image example
I'm using Mac OS High Sierra and none of these worked for me. But after searching a lot I found one that worked!
This may seem trivial, but in fact about 2 months ago some clever guys made changes in brew repository, so doing just: brew install php71-intl will show you error with message that such recipe doesn’t exists.
Fortunately, there is. There is temporary fix in another brew repo, so all you have to do is:
brew tap kyslik/homebrew-php
brew install kyslik/php/php71-intl
SOURCE: http://blastar.biz/2018/04/14/how-to-enable-php-intl-extension-for-php-7-1-using-xampp-on-macos-high-sierra/
I use Linux Ubuntu 20, you can try this:
Check php installed modules:
php -m | grep intl
If there are no result(s) from this command, you should just go ahead and install the module:
sudo apt-get install php7.4-intl
you will need to change *php7.4 to your desired php version.
you should restart apache when you're done:
sudo service apache2 restart
I'm trying to install Facebook PHP SDK with Composer. This is what I get
$ composer install
Loading composer repositories with package information
Installing dependencies (including require-dev)
Your requirements could not be resolved to an installable set of packages.
Problem 1
- Installation request for facebook/php-sdk dev-master -> satisfiable by facebook/php-sdk[dev-master].
- facebook/php-sdk dev-master requires ext-curl * -> the requested PHP extension curl is missing from your system.
Problem is, I have curl extension enabled (uncommented in php.ini). When I run phpinfo(), it says it's enabled.
Only clue I have is that when I run $ php -m, 'curl' line is missing but I don't know what to do about it.
I have wamp 2.4 on Win8 and I'm running composer in cmd.exe.
This is caused because you don't have a library php5-curl installed in your system,
On Ubuntu its just simple run the line code below, in your case on Xamp take a look in Xamp documentation
sudo apt-get install php5-curl
For anyone who uses php7.0
sudo apt-get install php7.0-curl
For those who uses php7.1
sudo apt-get install php7.1-curl
For those who use php7.2
sudo apt-get install php7.2-curl
For those who use php7.3
sudo apt-get install php7.3-curl
For those who use php7.4
sudo apt-get install php7.4-curl
For those who use php8.0
sudo apt-get install php8.0-curl
Or simply run below command to install by your version:
sudo apt-get install php-curl
This worked for me: http://ubuntuforums.org/showthread.php?t=1519176
After installing composer using the command curl -sS https://getcomposer.org/installer | php just run a sudo apt-get update then reinstall curl with sudo apt-get install php5-curl. Then composer's installation process should work so you can finally run php composer.phar install to get the dependencies listed in your composer.json file.
on php7 run for example:
> sudo apt-get install php-curl
> sudo apt-get install php-mbstring
for every missing extension. Then:
> sudo apt-get update
and finally (in the project's root folder):
> composer install
As Danack said in comments, there are 2 php.ini files. I uncommented the line with curl extension in the one in Apache folder, which is php.ini used by the web server.
Composer, on the other hand, uses php for console which is a whole different story. Php.ini file for that program is not the one in Apache folder but it's in the PHP folder and I had to uncomment the line in it too. Then I ran the installation again and it was OK.
I ran into the same issue trying to install Dropbox SDK.
CURL was indeed enabled on my system but this meant by the php.ini in the wamp\bin\apache folder.
I simply had to manually edit the php.ini situated in wamp\bin\php, uncomment the extension=php_curl.dll line, restart Wamp and it worked perfectly.
Why there are those 2 php.ini and only one is used is still a mystery for me...
Hope it's helpul to someone!
I had this problem after upgrading to PHP5.6. My answer is very similar to Adriano's, except I had to run:
sudo apt-get install php5.6-curl
Notice the "5.6". Installing php5-curl didn't work for me.
For anyone who encounters this issue on Windows i couldn't find my answer on google at all.
I just tried running composer require ext-curl and this worked.
Alternatively add the following in your composer.json file:
"require": {
"ext-curl": "^7.3"
}
According to https://github.com/composer/composer/issues/2119 you could extend your local composer.json to state that it provides the extension (which it doesn't really do - that's why you shouldn't publicly publish your package, only use it internally).
I ran into a similar issue when trying to get composer to install some dependencies.
It turns out the .dll my version of Wamp came with had a conflict, I am guessing, with 64 bit Windows.
This url has fixed curl dlls: http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
Scroll down to the section that says: Fixed Curl Extensions.
I downloaded "php_curl-5.4.3-VC9-x64.zip". I just overwrote the dll inside the wamp/bin/php/php5.4.3/ext directory with the dll that was in the zip file and composer worked again.
I am running 64 bit Windows 8.
Hope this helps.
if use wamp go to:
wamp\bin\php\php.5.x.x\php.ini
find:
;extension=php_curl.dll
remove (;)
Enable in php 7 try below command
sudo apt-get install php7.0-curl
Not sure why an answer with Linux commands would get so many up votes for a Windows related question, but anyway...
If phpinfo() shows Curl as enabled, yet php -m does NOT, it means that you probably have a php-cli.ini too. run php -i and see which ini file loaded. If it's different, diff it and reflect and differences in the CLI ini file. Then you should be good to go.
Btw download and use Git Bash instead of cmd.exe!
I have Archlinux with php 7.2, which has Curl integrated, so no amount of configuration voodoo would make Composer see ext-curl, that PHP could see and work with happily. Work around is to use Composer with --ignore-platform-reqs.
eg composer update --ignore-platform-reqs
Reference = https://github.com/composer/composer/issues/1426
try install php5-curl by using below snippet.
sudo apt-get install php5-curl
if it won't work try below code i m sure it will work fine.
sudo apt-get install php-curl
for me it worked... all the best :)
In my case I moved from PHP5 to PHP7 and I ve got this error,
Simply go to your /bin/php/php7/php.ini , then uncomment extension=php_curl.dll and restart your server, re-run your composer install.
If you getting error like php7.2-curl doesn't have installable candidate or not locate any package or dependencies is php7.2-common Or libcurl3 Do this
You have to tackle in mature way. Install aptitude these ubuntu package manager will finds all dependencies, and will install one by one.
apt-get install aptitude
Now you have to check if aptitude can download it or not if download it follow instructions
sudo aptitude install php7.2-curl
If you have gotten any error like this
E: Unable to locate package php7.2-curl
E: Couldn't find any package by glob 'php7.2-curl'
Any type on error i'm not talking about proper these errors
Try to add php package again
sudo apt-add-repository ppa:ondrej/php
sudo apt-get update
Now try this command
sudo aptitude install php7.2-curl
Aptitude will ask you you want to keep current version of all dependencies
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) php7.2-curl [Not Installed]
Accept this solution? [Y/n/q/?]
Type n then Enter
Aptitude will find all dependencies and ask you to install all package type
y
Again
y
Then
systemctl restart apache2
For centos of rhel
systemctl restart httpd
It will Not enabling PHP 7.2 FPM by default.
NOTICE: To enable PHP 7.2 FPM in Apache2 do
a2enmod proxy_fcgi setenvif
a2enconf php7.2-fpm
This method is not only for this error you can find any of php apache2 or ubuntu system package solution using aptitude.
Upvote if you find your solution
If you are ubuntu, this will work for you.
composer update --ignore-platform-reqs
I'm trying a simple web service example and I get this error even though I uncommented extension=php_soap.dll in the php.ini file:
Fatal error: Class 'SoapClient' not found in C:\Program Files (x86)\EasyPHP-5.3.9\www\server.php on line 2
Diagnose
Look up the following inside your script file
phpinfo();
If you can't find Soap Client set to enabled like so:
Fix
Do the following:
Locate php.ini in your apache bin folder, I.e Apache/bin/php.ini
Remove the ; from the beginning of extension=php_soap.dll
Restart your Apache server
Look up your phpinfo(); again and check if you see a similar picture to the one above
If you do, problem solved!
On the other hand if this doesn't solve your issue, you may want to check the requirements for SOAP here. Also in the comment section you can find good advice on connecting to https.
To install SOAP in PHP-7 run following in your Ubuntu terminal:
sudo apt-get install php7.0-soap
To install SOAP in PHP-7.1 run following in your Ubuntu terminal:
sudo apt-get install php7.1-soap
To install SOAP in PHP-7.2 run following in your Ubuntu terminal:
sudo apt-get install php7.2-soap
To install SOAP in PHP-7.3 run following in your Ubuntu terminal:
sudo apt-get install php7.3-soap
For AWS (RHEL):
sudo yum install php56-soap
(56 here is 5.6 PHP version - put your version here).
To install SOAP in PHP5.6 run following in your Ubuntu 14.04 terminal:
sudo apt-get install php5.6-soap
service php5.6-fpm restart
service apache2 restart
See if SOAP was enabled:
php -m
(You should see SOAP between returned text.)
I had to run
php-config --configure-options --enable-soap
as root and restart apache.
That worked! Now my phpinfo() call shows the SOAP section.
I solved this issue on PHP 7.0.22-0ubuntu0.16.04.1 nginx
sudo apt-get install php7.0-soap
sudo systemctl restart php7.0-fpm
sudo systemctl restart nginx
I couln't find the SOAP section in phpinfo() so I had to install it.
For information the SOAP extension requires the libxml PHP extension. This means that passing in --enable-libxml is also required according to http://php.net/manual/en/soap.requirements.php
From WHM panel
Software » Module Installers » PHP Extensions & Applications Package
Install SOAP 0.13.0
WARNING: "pear/HTTP_Request" is deprecated in favor of "pear/HTTP_Request2"
install ok: channel://pear.php.net/SOAP-0.13.0
Install HTTP_Request2 (optional)
install ok: channel://pear.php.net/HTTP_Request2
Restart Services » HTTP Server (Apache)
From shell command
1.pear install SOAP
2.reboot
For XAMPP users, open php.ini file located in C:/xampp/php and remove the ; from the beginning of extension=soap. Then restart Apache and that's it!
For Docker* add this line:
RUN apt-get update && \
apt-get install -y libxml2-dev && \
docker-php-ext-install soap
*: For debian based images, ie. won't work for alpine variants.
For PHP 7.4 & Docker
add this line in Dockerfile:
RUN apt-get update && apt-get install -y \
libxml2-dev \
RUN docker-php-ext-install soap
Rebuild the image and restart ;)
You have to inherit nusoap.php class and put it in your project directory, you can download it from the Internet.
Use this code:
require_once('nusoap.php');
On Centos 7.8 and PHP 7.3
yum install php-soap
service httpd restart
For PHP 8:
sudo apt update
sudo apt-get install php8.0-soap
In my case, the Symfony cache was causing the problem,
after running composer install the problem was gone.
I had a similar problem. It was due to the scope and solved by replacing new SoapClient by new \SoapClient.
I am trying to install pspell for PHP 5 in Ubuntu. I have installed the aspell library which is required to run pspell as shown here
I am not sure if there are any settings I need to change, etc.
When I try to execute the below mentioned line of code
$pspell_link = pspell_new("en");
I get an error
Fatal error: Call to undefined function pspell_new()
Any idea on what could be wrong ?
Any help greatly appreciated.
just do
sudo apt-get install libpspell-dev
sudo apt-get install php5-pspell
sudo apt-get install aspell-en
then restart your apache2 server with the following command
sudo service apache2 restart
it will be added automatically to your php.ini
you can try this example
For those using PHP 7.2 / Ubuntu 18.10, here is what I did to get PSPELL working:
sudo apt-get install php5-pspell
sudo apt-get install php-pspell
sudo apt-get install aspell-en
sudo apt-get install aspell-fr
sudo apt-get install aspell-de
sudo apt-get install aspell-es
sudo service apache2 restart
I use multiple languages, so included some of them in the example above. I believe EN is included by default.
"I have installed the aspell library which is required to run pspell as shown here"
that's if you compile your own PHP - did you recompile with pspell?
Note that this package just provides the API and data, you are getting an error becuase your PHP doesn't know how to interface with it.
If you're not into building your own code, the PHP extension is available as a package:
(NB this is JUST the PHP side of the service)
http://packages.ubuntu.com/source/dapper/php-pspell
C.
Have you configured php.ini to load the extension?