I'm using a Windows 8 64-bit machine and a 32-bit version of WAMPServer
I downloaded the PHP drivers from Github https://github.com/mongodb/mongo-php-driver/downloads
Copied the .dll to C:\wamp\bin\php\php5.4.16\ext\
Added the line extension=php_mongo.dll to the php.ini file
I still get Fatal error: Class 'Mongo' not found
I echoed phpinfo() and the extension has not been loaded - it does not appear
Does anyone know how to fix this?
I can't add this as a comments because of low reputation.
Did u restart your server after updating ur php.ini file.
Had the same issue. Below steps solved my issue.
Make sure you have a 32 bit WAMP setup in place. Apparently, there are problems with 64 bit
Get the lates php_mongo driver from https://github.com/mongodb/mongo-php-driver/downloads compatible with your version
Rename it to php_mongo.dll and copy it to php extenstions folder. Default on windows is "ext"
check phpinfo()
Check for Loaded Configuration File variable. It gives you the path from where the php.ini file is read
Add the line extension=php_mongo.dll to the php.ini file in the above path
Restart your services
Looks like it can't load the Mongo Module.
First You have to download the stable dll zip file. PHP-MONGO
Download the Threaded-version of the module. Copy the dll file and paste it in C:\wamp64\bin\php\php5.6.19\ext (if wamp). then go to your php.ini file and paste the following script: extension=php_mongo.dll in the extensions row.
Note: There shouldn't be a ';' before the extension .
Then restart WAMP. In the wamp-php-extension menu you could find the php_mongo. tick mark it. Restart Wamp.
Start mongo and the try executing the following script.
<?php
if($connection = new mongoClient()){
echo "Connected Successfully";
}
?>`
Note: First start the Mongo server.
For more info: PHP/Mongo Manual
If you have problem in start Mongo then Write the command as follows in your Mongo/bin directory:
mongod --storageEngine=mmapv1 --dbpath [your-path]
your-path= The path you want to save the Databse files. (ex: F:\data\db )
The Mongo sever would be running now. Don't close the cmd.
Related
I am trying out the Drupal CMS, and I wanna try it out on my local computer first so I am following this guide: https://www.drupal.org/docs/official_docs/en/_evaluator_guide.html. Drupal requires PHP to run.
I installed php 8.0.3 for Windows Zip and put it in my path file so PHP works on the command prompt.
I also installed Drupal 9.1.5 unzipped it and am currently running commands in the drupal-9.1.5 directory.
I ran the command from this set up guide thinking it would launch drupal:
php core/scripts/drupal quick-start demo_umami
And the command prompt gave me the error:
[ERROR] You must have the pdo_sqlite PHP extension installed See
core/INSTALL.sqlite.txt for instructions, now I checked
so I headed over to INSTALL.sqlite.txt in the Drupal directory and it told me:
Windows
------- Read more about it on http://www.php.net/manual/en/pdo.installation.php
I went to the website and it says that the driver is enabled by default, but since I'm getting the error, it must mean I don't have it on PHP so it told me to head over to the php.ini file. In my PHP directory, since it's a newer version it has the php.ini-development file and php.ini-production file.
The windows fix says to simply uncomment ;extension=pdo_sqlite to extension=pdo_sqlite which I did for both php.ini-development and -production files. This is where I'm stuck. I did exactly what the error told me to fix and I am still getting it. How can I fix this?
I looked around and every solution for windows is to uncomment and I still get the error.
Another thing on the php manual states that extension=php_pdo.dll, but my php.ini file does not have the extensions. does that matter?
Here are my uncommented extensions which I thought could contribute to helping the error:
extension=php_pdo.dll
extension=pdo_sqlite
extension=sqlite3
One last attempt at trying to get this php command to work is installing the Windows sqlite binary and putting it into windows path (contains a dll not an exe), but that didn't help anything either.
How do I fix this. Thank you.
Hi just make a copy of "php.ini-development" and rename it "php.ini".
And uncomment the extensions you need.
I have Apache 2.4.12 and php 5.6.9 on my Windows 8 computer and I'm trying to enable the curl extension for php however, I haven't had much success. After searching the internet for this issue it appears that other's have had the same trouble. Here are the suggestions I've found:
Uncomment ;extension=php_curl.dll in php.ini
Uncomment ;extension_dir = "ext" in php.ini
Download and replace the php_curl.dll file in the ext directory of php with one from this website
Add to the PATH environment variable where php is installed
Copy libeay32.dll and ssleay32.dll from where php is installed to C:\Windows\System32
I've tried every single suggestion with no success except the third item in the list because it doesn't have a .dll file for curl with php 5.6, in fact the highest version avaible is one for php 5.4. There has to be way to enable this extension without having to downgrade my php version to 5.4 and using a .dll file from that website. I've tried searching the internet for a .dll file like the one on the linked website for php 5.6 opposed to a version of php that's outdated but I've had no luck in finding one so I'd like help with this issue.
How can I enable curl for php 5.6 on my Windows 8 machine?
Locate your php folder and follow these instructions:
Move to Windows\system32 folder:
libssh2.dll, php_curl.dll, ssleay32.dll, libeay32.dll
Move to Apache24\bin folder
libssh2.dll
Uncomment extension=php_curl.dll
Note: Don't overwrite when prompted.
Source
I give you an example of a set up that just worked perfectly for me :
downloaded the VC11 x86 Thread Safe version of PHP,
unzipped it within a directory C:\php,
edited the php.ini-development, uncommenting 2 lines :
extension=php_curl.dll
extension_dir = "ext"
saved this file under php.ini.
I just tested it via the CLI (windows CMD here) on a PHP a file (i.e. C:\php\php myFile.php) and cURL worked.
If you have Apache installed and prefer to test it in a browser, you obviously have to adapt this installation with your own files structure and to do not forget to restart Apache.
Running apache service with a specific user other than local system solved the problem for me. You can test this easily by stopping the apache service and running manually <apache dir>\bin\httpd.exe.
I fixed this problem by adding C:\php and C:\php\ext to PATH system variables.
Press window + pause to bring up the System Properties page.
Click Advanced System Settings
Click Environment Variables
You'll see the Path variable in the System Variables box in the bottom.
Append your PHP path to that variable. Now the system will be able to load the extensions.
In addition to uncommenting the line
;extension_dir = "ext"
Try also setting it to the absolute path of the PHP installation's ext folder and then restarting apache.
e.g.:
extension_dir = "C:\PHP 5.6.19\ext"
I already uncommented in php.ini:
[PHP]
;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
;extension=php_oci8_11g.dll
extension=php_openssl.dll
;extension=php_pdo_firebird.dll
Variables of the system set ok.
PHP version 5.4.16:
C:\wamp\bin\php\php5.4.16\php.exe
Add to System path variable:
C:\ProgramData\ComposerSetup\bin
But, recive this error:
Some settings on your machine make Composer unable to work properly.
Make sure that you fix the issues listed below and run this script again:
The openssl extension is missing, which means that secure HTTPS transfers are
impossible. If possible you should enable it or recompile php with --with-openssl
I'm using:
windows 7
Wamp
php 5.1.16
apache 2.4.4
How solve this problem, please help me.
Open php.ini located in your "php" folder for example in xampp the file is in XYZ:\xampp\php\
Find "extension=php_openssl.dll"
";extension=php_openssl.dll" - remove ";"
Restart your xampp (or whatever u use), extension should be loaded after that.
Try agien to install composer.
ensure you are editing the php.ini locate on same place where is located php.exe, i was the same problem and wamp say the openssl is actived but Composer-Setup.exe used the php.ini in php directory/ext/ and wamp used C:\System...\php.ini,
Regards,
I have battled this several times. And this is the best solution I have found.
As mentioned, you need to ensure that extension=php_openssl.dll is enabled but doing just that sometimes may not resolve the error.
You should check that you have PHP on your path variable then see what INI file is loaded by typing php --ini in the console it should give you something like:
Configuration File (php.ini) Path: C:\WINDOWS
Loaded Configuration File: C:\WINDOWS\php.ini
Scan for additional .ini files in: (none)
Additional .ini files parsed: (none)
Make sure you are enabling the settings in the correct ini file. If you dont have an ini file loaded put an ini file from the php directory into c:\windows.
Also important
I find it helps to change the extension_dir flag to an absolute path from relative to makesure the system can find php_opensll.dll.
To do this uncomment the line starting extension_dir and change it to match from the drive root.
Example: C:\php\ext instead of ext/
For MAMP users, this is what worked for me.
If your php.ini is located under a \MAMP\conf\
copy the php.ini into a\MAMP\bin\php\php[your PHP version number]\
Restart MAMP and the command-line window
Go to a directory under a command-line window where you want to install composer
run from a command line:
php -r "readfile('http://getcomposer.org/installer');" | php
NOTE: it is http not https !
END
I figured it out and successfully installed Composer in My windows 10 PC.
I am sharing two solutions here.
There are some steps you have to follow in order to solve your problem.
1st solution.
Find and Open php.ini located in your "php" folder In my case it is in xampp the file is in c:\xampp\php\
Find "extension=php_openssl.dll"
";extension=php_openssl.dll" uncomment by removing the semicolon ";"
Restart your xampp , now extension should be loaded after that.
Try again now you are able to install composer.
2nd solution(If the above solution not work for you then go with below solution . )
This works in my case
Find and Open php.ini located in your "php" folder In my case it is in xampp the file is in c:\xampp\php\
Open SHELL from Xampp start panel by clicking on shell button.
Write php in shell and hit enter
If you get some waring message in your shell something like below .
Then you have to fix these waring message by commenting all these extension in your php.ini file.(Actually cause of these warning messages are because more than one time these extensions are enabled but you can un-comment it in php.ini file for solving the issue).
For Example which is in my case.
a). You can see in above image there is warning message for curl.
Module 'curl' already loaded in Unknown on line 0 .
b) To fix this find php_curl.dll file in your php.ini file and comment that extension by adding semicolon ";" in front of that extension like this ;extension=php_curl.dll
Follow above steps if you have more than one warning for each extension untill you are not getting any warning message in your shell.
Restart your xampp , now extension should be loaded after that.
Try again now you are able to install composer.
Hope I can solve your issue .
That's all folks . Happy coding !!! (amitamie.com) :-) ;-)
The problem solved after turn off windows firewall.
installation complete!
I nearly wrapped my head off trying to install composer on my windows 7 machine.
I was trying to install composer through the composer installer from getcomposer.org.
After the common openssl extension enabling (As above answers describing).
The installer has finished the installation successfully. But calling composer on the command line, wasnt
possible. It was telling me composer / application not found, check for typos etc...
Cant getting it running, I looked at the manually install guide and noticed something weird.
The doc said: "Close your current terminal. Test usage with a new terminal:"
I closed my terminal window. Opened a new one and IT WORKED!!!
I had a terminal window open during the composer installation. After that I was trying to call composer via the command line in this terminal. This didnt work.
So why did it not work?
The composer installer downloads the composer.phar file and sets a environment path to it. The terminal only gets the environment PATHS, when it gets started. So of course the path wasnt set for the terminal.
Solution:
If you have a terminal open before the installation just close it and open a new terminal window to get composer ready to use!!!
I hope I can save someone a couple hours of living time.
You can follow this guide:
http://abuango.net/2014/08/16/how-to-install-composer-on-windows-with-xampp/
Hope it helps you.
Find a php.ini in C:\wamp\bin\php\php5.4.16\ (the configuration file of PHP).
Remove ; in lines ;extension=php_openssl.dll and ;extension_dir = "ext". PHP will know that you are using a php_openssl extension and extension_dir is the location of extensions (you can see it in the comment above php_openssl).
Run the Windows command prompt with administrator permissions.
Execute the following command: mklink C:\Windows\php.ini C:\wamp\bin\php\php5.4.16\php.ini
Composer search php.ini in C:\Windows\php.ini and you have your PHP in WAMP. With mklink command you create a link php.ini that aim to your WAMP's php.ini.
i was facing the same issue but i fixed that,
if you are using wamp
goto your selected php version directory and then you need to edit that directory php.ini file
replace this line ;extension=php_openssl.dll to extension=php_openssl.dll and save and then restart then it will be working :)
Beside all of the above If php/xampp is not installed in c drive this problem occurred (what happened with me).
In that case please follow this link :
http://abuango.net/2014/08/16/how-to-install-composer-on-windows-with-xampp/
I was facing the same issue in windows 7 PC with xampp.
Cannot open '\xampp\php\extras\browscap.ini' for reading in Unknown on line 0
I just change the value of 'browscap' in php.ini file. Use full path instead of absolute path.
In my case Xampp was in E drive so I have changed
browscap="\xampp\php\extras\browscap.ini"
to
browscap="E:\xampp\php\extras\browscap.ini"
And it works for me!
I downloaded and installed PostgreSQL 9.2.3, which came with Stackbuilder.
I used the PostgreSQL Stackbuilder to install Apache (2.2.22) & PHP (5.4.5).
Now I'm trying to connect to a database with PDO, but I'm getting a driver not found error.
I've un-commented the extension=php_pgsql.dll & extension=php_pdo_pgsql.dll in my php.ini file.
My phpinfo(); function shows that they're enabled.
The main thing I'm noticing is that within my php\ directory there's no ext\ directory with these files. I would have assumed that these files would have been automatically installed to a php\ subdirectory.
Where could these extensions be stored; do I need to designate an absolute path for php to find them?
UPDATE:
So I went into php.ini and turned on Startup Errors. When I launch the commandline php.exe I get errors stating that php_pgsql.dll & php_pdo_pgsql.dll can't be found.
It looks like they're trying to reference them on a D: drive, which I don't have. I installed everything to the same directory on the E: drive. I can't find the extensions anywhere (and neither can php).
In Wamp (windows)...
copy C:\wamp\bin\php\php5.x.xx\libpq.dll
paste in C:\Windows\System32\
on Wamp, there are 2 php.ini files, you will have to check if the Postgresql extension is on both!
The extension line is
extension=php_pdo_pgsql.dll
So check on
C:\wamp\bin\apache\apache2.4.9\bin\php.ini
Also check on
C:\wamp\apache\apache2.4.9\bin\php.ini
After adding the extension line, restart Apache and it will work.
Update: The problem appears to have been corrupt DLLs somewhere in my PHP installation, or possibly a bug in PHP 5.2.9 on Win2k. I downloaded the windows (binaries-only) distribution of PHP 5.2.10 from php.net and extracted that to my c:\PHP directory. After doing that, everything worked fine.
Update2: I undid everything that I tried earlier (everything from the bulleted list below), except that I left "extension=php_curl.dll" uncommented in my php.ini file. It turns out that is all you should have to do in a proper installation.
I'm trying to get CURL to work on a Windows installation of PHP (version 5.2.9-2), and I am at wit's end. I have found the PHP CURL installation page, this SO question which references this page, and this SO question. I've tried most of the suggestions in all of those pages but I still get an error. Here is my very simple test page:
<?php
$ch = curl_init();
?>
<b>Success!</b>
This gives me:
Fatal error: Call to undefined function curl_init() in C:\ApacheRoot\curltest.php on line 2
In my Apache error log I get this each time the server starts:
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\\PHP\\ext\\php_curl.dll' - The specified procedure could not be found.\r\n in Unknown on line 0
I have done the following:
Uncommented the following line in php.ini: extension=php_curl.dll
Copied ssleay32.dll and libeay32.dll from C:\PHP to C:\WINNT\System32
Downloaded cURL for Win32 from curl.haxx.se and extracted the .zip file to C:\cURL
Added C:\cURL to my system PATH environment variable.
Verified that:
php.ini includes extension_dir="C:\PHP\ext"
The directory C:\PHP\ext contains php_curl.dll
The only php.ini file on my system is in C:\PHP (i.e. especially that there is no C:\WINNT\php.ini)
The Apache httpd.conf file includes the line PHPIniDir "C:/PHP/"
I have also rebooted the machine (several times, in fact...).
You don't have to reboot the computer, just restart the apache and the php module will read the new ini.
Did you change the correct php.ini? In case of doubt
<?php echo 'php.ini: ', get_cfg_var('cfg_file_path'); ?>
can tell you.
Is there something in the error.log of the apache that indicates that something went wrong while loading php and the php_curl.dll?
Did you start the apache as a win32 service? If you did try to start it as a console application. Error messages will show up on the console then. Or start it as a service and take a look at the error.log file and the windows event log (start, run, eventvwr.msc /s).
edit:
"The specified procedure could not be found"
You need a dll that is compatible with your php version and build. Exactly what did you install and where did you get it from?
Try this:
Stop WAMP completely.
Find your WAMP folder: C:\Path\To\WAMP\bin\Apache\ApacheVersion\bin\
Edit that php.ini and uncomment extension=php_curl.dll
Restart WAMP.
That should hopefully solve it.
*EDIT: Do the same thing # C:\Path\To\WAMP\bin\php\PHPVersion\
This is what worked for me
Answered by Soren from another SO thread - CURL for WAMP
"There seems to be a bug somewhere. If you are experiencing this on Win 7 64 bit then try installing apache addon version 2.2.9 and php addon version 5.3.1 and switching to those in WAMP and then activating the CURL extension. That worked for me."
This fixed it for me:
Go to here:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
Download 'php_curl-5.3.13-VC9-x64.zip'
Stop WAMP Server from Running
Extract the file 'php_curl.dll'.
On your local machine, browse to (or where your WAMP installation is found) c:\wamp\bin\php\php5.3.13\ext
Rename php_curl.dll to php_curl.dll.old (or whatever you choose) and then copy the new file into the above directory.
Restart WAMP Server
All should be working ok now.
I had the same problem with php-5.5.26-Win32-VC11-x64 (on Windows) and I tried everything listed here with no luck. Finally I got it working by adding PHP installation directory to windows Path.
With PHP 5.6.9 on Windows Server Core 2012 x64 cURL was not working, not showing up in phpinfo despite uncommenting php_curl.dll extension in my php.ini and restarting the Apache 2.4 service. Added the php path and the php\ext path to my $evn:path. No joy.
Fix: I didn’t need to download any other php_curl.dll file and couldn’t find one for PHP 5.6 anyway. What finally worked was to copy these three files into the Apache24\bin folder then restart Apache:
libeay32.dll
libssh2.dll
ssleay32.dll
Copying these to System or System32 was not needed.
If the problem persists after you uncomment the module from both php.ini files (that people are already talking about and which are located on apache folder and php folder) and even after you check that you got the php_curl.dll ** at
C:\WAMP\bin\php\php5.3.13\ext
YOU SHOULD TRY TO REPLACE THE ORIGINAL DLL THAT COMES WITH WAMPSERVER with one from this website:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
My problem was there!
Hope it helps.