Amateur question, I know but could someone please let me know the correct syntax for inputting variables in the "$to = " section when using php's mail function. When I used the below format, I got an error. I know its possible to input the email addresses as constants like "$to = abc#gmail.com, def#gmail.com", but I want to use variables.
Thanks in advance!
$to = '$user1', '$user2';
$subject = 'Congratulations! You have a match!';
$message = 'Someone who you liked likes you too! Log in to find out who';
$headers = 'From: info#xyy.com' . "\r\n" .
'Reply-To: info#xyy.com' . "\r\n" .
mail($to, $subject, $message, $headers);
change this
$to = '$user1', '$user2';
to this
$to = "$user1,$user2";
Easy as
$to = "$user1, $user2";
Please ensure you have validated e-mail addresses, e.g. by using
$to = filter_var($user1, FILTER_SANITIZE_EMAIL) . ', ' . filter_var($user2, FILTER_SANITIZE_EMAIL);
which implements a little security.
It accepts a single comma separed string.
$to="$user1,$user";
Phpmail docs
Related
I've created a web site and I'm using this link for a JS pop up form to be emailed using PHP.
I also used the code from here and everything works except for a couple things. When I don't remove some variables, the order of information is out of place when it emails.
And when I keep all the variables, I get the following error in a log and nothing sends until I remove them:
PHP Warning: mail() expects at most 5 parameters, 7 given in xxxxxxxxxxxxxxxxxxxxx/quote.php on line 41
Below is the code where the error is coming from:
else{
$Company = $_POST['company'];
$Email = $_POST['vemail'];
$Name = $_POST['name'];
$Number = $_POST['number'];
$Info = $_POST['info'];
$headers = 'From:'. $email2 . "\r\n"; // Sender's Email
$headers .= 'Cc:'. $email2 . "\r\n"; // Carbon copy to Sender
// Message lines should not exceed 70 characters (PHP rule), so wrap it
// $message = wordwrap($message, 70);
// Send Mail By PHP Mail Function
mail("info#bvcdenver.com", $Company, $Email, $Name, $Number, $Info, $headers);
echo "Your quote request has been sent successfuly ! Thank you for your interst. You are being redirected back to xxxxxxxxxxxx in 5 seconds.";
}
How can I send all the variable? Order won't matter if I can get them all to send.
Note: I don't have a lot of scripting experience. This site is created using only HTML/CSS and these PHP and JS sections. So ideally I'd like to not change the entire site.
You need to proper use the php mail function() as it is stated here http://php.net/manual/en/function.mail.php.
The max number of parameters is 5:
- TO ( in your case: "info#bvcdenver.com" )
- SUBJECT ( in your case: $Company )
- MESSAGE ( in your case: $Email )
the last 2 are additional headers and additional parameters.
If you want to send all the data "email, name, number and info" you should organize a string/text variable and put it on the 3rd place
like:
$message = $Email . " - " . $Name . " - " . $Number . " - " . $Info;
mail("info#bvcdenver.com", $company, $message, $headers);
This should do the work and you can customize the message numbers how you want, with html or raw new lines, and get a proper template.
<?php
$to = 'nobody#example.com';
$subject = 'the subject';
$message = 'hello';//pass every variable into message
$headers = 'From: webmaster#example.com' . "\r\n" .
'Reply-To: webmaster#example.com' . "\r\n" .
'X-Mailer: PHP/' . phpversion();
mail($to, $subject, $message, $headers);
?>
my site is hosted on name.com, and to test this I uploaded a simple file called contact.php with this at the top.
<?php
$to = '~~~~';
$subject = 'enquiry from ';
$name = $_POST['name'];
$email - $_POST['email'];
$message = $_POST['message'];
if ($_POST){
mail($to, $subject, $message, $header);
$feedback = "Sent";
}
?>
So, when I click the submit button it sends the mail. Inside a p tag I have echo $feedback, which shows up after I click submit.
The mail does not send? Anything I'm doing wrong here, or do I need to configure my cPanel in some way?
Since header is optional and is left undefined, removing it should resolve your issue.
Be aware that using the $_POST content directly into a email is a security risk for you!
THere are good email libraries that have tools to avoid abuses. (For example: ZendMail, PHPmailer)
Having said that, on your code you are missing the header and have a small mistake on $email = (not -) $_POST['email'];, you can use this:
$header = 'From: from#name.com' . "\r\n" .
'Reply-To: from#name.com' . "\r\n" .
'Content-type: text/html; charset=iso-8859-1' . "\r\n" .
'X-Mailer: PHP/' . phpversion();
You have not set header variable which is optional, there is a typo while setting $email variable, you've use - instead of =
your updated code,
<?php
$to = 'a#a.com';
$subject = 'enquiry from ';
$name = $_POST['name'];
$email = $_POST['email'];
$message = $_POST['message'];
if ($_POST){
mail($to, $subject, $message);
$feedback = "Sent";
}
?>
I have a pretty standard contact form with inputs for name, email address and phone number. As well as sending the email to the specified email address as per a standard form,
$to = 'diysoakwells#hotmail.com';
I would also like to send the email to the user using the address from the email address input from the form. I was thinking using the post variable from the email input like this would work:
$to = 'diysoakwells#hotmail.com', $email;
but no luck. Can someone point me in the right directiona and are there any security risks in using this approach? I ultimately aim to provide the user with a checkbox that if checked sends a copy of the email to themselves.
Here is a link to my form
http://www.diysoakwells.com.au/cart.php
Thankyou in advance : )
<?php
include_once("wsp_captcha.php");
if(WSP_CheckImageCode() != "OK") {
header('location:/form-rejected.php');
die();
}
$to = 'diysoakwells#hotmail.com';
$subject = 'Order Inquiry';
$jcitems = " <p><b>ORDER:</b></p><p> " . $_POST['jcitems']."<p/>" . "<p><b>Total:</b> $" . $_POST['jctotal']."</p>";
$time = date ("h:i A");
$date = date ("l, F jS, Y");
$headers = "MIME-Version: 1.0\r\n";
$headers .= "Content-Type: text/html; charset=ISO-8859-1\r\n";
$headers .= 'From: inquiry#diysoakwells.com' . "\r\n" .
'Reply-To: noreply#diysoakwells.com' . "\r\n" .
'X-Mailer: PHP/' . phpversion();
$name = $_POST['name'];
$phone = $_POST['phone'];
$emaile = $_POST['emaile'];
$textbox = $_POST['textbox'];
$text = "<html><body><p><b>Message:</b>\n$textbox</p><p>This form was submitted on Your Web Site on \n $date at\n $time</p><p><b>Customers Email Address:</b> $emaile</p><p><b>Customers Name:</b> $name </p><p><b>Customers Phone Number:</b> $phone </p></html> </body>";
$body = $text . $jcitems;
mail($to, $subject, $body, $headers);
Header('Location: ../form-accepted.php');
?>
What your doing is not what you want to do. Concatenating two strings in PHP is done with the . not the , so the correct syntax is:
$to = 'diysoakwells#hotmail.com'.", ".$emaile;
or simply
$to = "diysoakwells#hotmail.com, $emaile";
That's assuming that the code in charge of sending the email uses php's mail() function, which allows multiple emails in the $to argument. If that doesn't work, I can't be of more use without seeing the actual code.
The 'to' field on emails accepts a string, with the email address comma-separated.
$to = 'diysoakwell#hotmail.com, ' . $emaile;
should do the trick.
You should check the email address that they provide is formatted as an email address, and it would be a good idea to have a CAPTCHA to prevent automated bots from using your form as a spamming tool.
If you use php mail() function you can send copy by specifying additional headers like that:
$headers = 'Cc: '.$emaile;
mail($to, $subject, $message, $headers);
I'm using PHP's mail() function and noticing that my mail is being shown from being sent by 'My Website' in my inbox, but when I click on the actual email it shows it being sent from mywebsite#sitename.localdomain.
Ideally I'd like to have it say being sent from 'My Website', but the reply email being 'no-reply#mywebsite.com', and not to have it say anything about #sitename.localdomain.
$to = trim(strtolower($_POST['to']));
$from = trim($_POST['from']);
$message = trim($_POST['message']);
$subject = $from . ' has shared a link with you';
$headers = 'From: My Website' . "\r\n" .
'Reply-To:' . $to . "\r\n" .
'X-Mailer: PHP/';
mail($to, $subject, $message, $headers);
Is this an issue that I need to fix in Apache, or can I modify the headers within PHP?
Try this:
$to = trim(strtolower($_POST['to']));
$from = trim($_POST['from']);
$message = trim($_POST['message']);
$subject = $from . ' has shared a link with you';
$headers = 'From: My Website <no-reply#mywebsite.com>' . "\r\n" . // <- change your email here
'Reply-To:' . $to . "\r\n" .
'X-Mailer: PHP/';
mail($to, $subject, $message, $headers);
The Question and Answer #1 contains a serious security vulnerability -
$to = trim(strtolower($_POST['to']));
Will allow an attacker to use your website to email arbitrary spam and your site will be blocked from most search engines.
See
https://www.owasp.org/index.php/Top_10_2010-A1
My recommendation is to
Sanitize the to and from fields
Never ever ever copy the message in the post to the output unless carefully sanitized.
I am using a simple HTML form for an event registration and I would like to send a PHP confirmation email to the registrant with the same information that is going to the administrator.
Here are the details:
$emailFromName = $_POST['name'];
$emailFrom = $_POST['email'];
$emailFromPhone = $_POST['phone'];
I would like to use the value from $emailFrom in the following email address to:
$emailTo = "name#domain.com", \"$emailFrom\";
edit: Added new configuration:
$emailHeaders = 'From: "Conference" <noreply#conference.org>' . 'CC: . $emailFrom .';
This obviously doesn't work, but you get the idea of what I am trying to.
Thanks!
You will need to add headers to the mail function...
for example:
$headers = 'From: Family History Conference <noreply#familyhistoryconference.org>' . "\r\n" .
'Reply-To: noreply#familyhistoryconference.org' . "\r\n" .
'CC: ' . $emailFrom . "\r\n";
and then
mail($to, $subject, $message, $headers);
References:
PHP Mail Function
You put "From: $name <$emailFrom>" in the additional parameters of the mail() function:
http://php.net/manual/en/function.mail.php
So, basically you want to CC a copy of the message to the user as well as the administrator?
It depends on which PHP library you're using to send it. If you're using the default PHP mail() function, you'll need to add additional headers:
// Additional headers
$headers .= 'Cc: ' . $emailFrom . "\r\n";
// Mail it
mail('admin#email.com', $subject, $message, $headers);