I've heard that SELECT * is generally bad practice to use when writing SQL commands because it is more efficient to SELECT columns you specifically need.
If I need to SELECT every column in a table, should I use
SELECT * FROM TABLE
or
SELECT column1, colum2, column3, etc. FROM TABLE
Does the efficiency really matter in this case? I'd think SELECT * would be more optimal internally if you really need all of the data, but I'm saying this with no real understanding of database.
I'm curious to know what the best practice is in this case.
UPDATE: I probably should specify that the only situation where I would really want to do a SELECT * is when I'm selecting data from one table where I know all columns will always need to be retrieved, even when new columns are added.
Given the responses I've seen however, this still seems like a bad idea and SELECT * should never be used for a lot more technical reasons that I ever though about.
One reason that selecting specific columns is better is that it raises the probability that SQL Server can access the data from indexes rather than querying the table data.
Here's a post I wrote about it: The real reason select queries are bad index coverage
It's also less fragile to change, since any code that consumes the data will be getting the same data structure regardless of changes you make to the table schema in the future.
Given your specification that you are selecting all columns, there is little difference at this time. Realize, however, that database schemas do change. If you use SELECT * you are going to get any new columns added to the table, even though in all likelihood, your code is not prepared to use or present that new data. This means that you are exposing your system to unexpected performance and functionality changes.
You may be willing to dismiss this as a minor cost, but realize that columns that you don't need still must be:
Read from database
Sent across the network
Marshalled into your process
(for ADO-type technologies) Saved in a data-table in-memory
Ignored and discarded / garbage-collected
Item #1 has many hidden costs including eliminating some potential covering index, causing data-page loads (and server cache thrashing), incurring row / page / table locks that might be otherwise avoided.
Balance this against the potential savings of specifying the columns versus an * and the only potential savings are:
Programmer doesn't need to revisit the SQL to add columns
The network-transport of the SQL is smaller / faster
SQL Server query parse / validation time
SQL Server query plan cache
For item 1, the reality is that you're going to add / change code to use any new column you might add anyway, so it is a wash.
For item 2, the difference is rarely enough to push you into a different packet-size or number of network packets. If you get to the point where SQL statement transmission time is the predominant issue, you probably need to reduce the rate of statements first.
For item 3, there is NO savings as the expansion of the * has to happen anyway, which means consulting the table(s) schema anyway. Realistically, listing the columns will incur the same cost because they have to be validated against the schema. In other words this is a complete wash.
For item 4, when you specify specific columns, your query plan cache could get larger but only if you are dealing with different sets of columns (which is not what you've specified). In this case, you do want different cache entries because you want different plans as needed.
So, this all comes down, because of the way you specified the question, to the issue resiliency in the face of eventual schema modifications. If you're burning this schema into ROM (it happens), then an * is perfectly acceptable.
However, my general guideline is that you should only select the columns you need, which means that sometimes it will look like you are asking for all of them, but DBAs and schema evolution mean that some new columns might appear that could greatly affect the query.
My advice is that you should ALWAYS SELECT specific columns. Remember that you get good at what you do over and over, so just get in the habit of doing it right.
If you are wondering why a schema might change without code changing, think in terms of audit logging, effective/expiration dates and other similar things that get added by DBAs for systemically for compliance issues. Another source of underhanded changes is denormalizations for performance elsewhere in the system or user-defined fields.
You should only select the columns that you need. Even if you need all columns it's still better to list column names so that the sql server does not have to query system table for columns.
Also, your application might break if someone adds columns to the table. Your program will get columns it didn't expect too and it might not know how to process them.
Apart from this if the table has a binary column then the query will be much more slower and use more network resources.
There are four big reasons that select * is a bad thing:
The most significant practical reason is that it forces the user to magically know the order in which columns will be returned. It's better to be explicit, which also protects you against the table changing, which segues nicely into...
If a column name you're using changes, it's better to catch it early (at the point of the SQL call) rather than when you're trying to use the column that no longer exists (or has had its name changed, etc.)
Listing the column names makes your code far more self-documented, and so probably more readable.
If you're transferring over a network (or even if you aren't), columns you don't need are just waste.
Specifying the column list is usually the best option because your application won't be affected if someone adds/inserts a column to the table.
Specifying column names is definitely faster - for the server. But if
performance is not a big issue (for example, this is a website content database with hundreds, maybe thousands - but not millions - of rows in each table); AND
your job is to create many small, similar applications (e.g. public-facing content-managed websites) using a common framework, rather than creating a complex one-off application; AND
flexibility is important (lots of customization of the db schema for each site);
then you're better off sticking with SELECT *. In our framework, heavy use of SELECT * allows us to introduce a new website managed content field to a table, giving it all of the benefits of the CMS (versioning, workflow/approvals, etc.), while only touching the code at a couple of points, instead of a couple dozen points.
I know the DB gurus are going to hate me for this - go ahead, vote me down - but in my world, developer time is scarce and CPU cycles are abundant, so I adjust accordingly what I conserve and what I waste.
SELECT * is a bad practice even if the query is not sent over a network.
Selecting more data than you need makes the query less efficient - the server has to read and transfer extra data, so it takes time and creates unnecessary load on the system (not only the network, as others mentioned, but also disk, CPU etc.). Additionally, the server is unable to optimize the query as well as it might (for example, use covering index for the query).
After some time your table structure might change, so SELECT * will return a different set of columns. So, your application might get a dataset of unexpected structure and break somewhere downstream. Explicitly stating the columns guarantees that you either get a dataset of known structure, or get a clear error on the database level (like 'column not found').
Of course, all this doesn't matter much for a small and simple system.
Lots of good reasons answered here so far, here's another one that hasn't been mentioned.
Explicitly naming the columns will help you with maintenance down the road. At some point you're going to be making changes or troubleshooting, and find yourself asking "where the heck is that column used".
If you've got the names listed explicitly, then finding every reference to that column -- through all your stored procedures, views, etc -- is simple. Just dump a CREATE script for your DB schema, and text search through it.
Performance wise, SELECT with specific columns can be faster (no need to read in all the data). If your query really does use ALL the columns, SELECT with explicit parameters is still preferred. Any speed difference will be basically unnoticeable and near constant-time. One day your schema will change, and this is good insurance to prevent problems due to this.
definitely defining the columns, because SQL Server will not have to do a lookup on the columns to pull them. If you define the columns, then SQL can skip that step.
It's always better to specify the columns you need, if you think about it one time, SQL doesn't have to think "wtf is *" every time you query. On top of that, someone later may add columns to the table that you actually do not need in your query and you'll be better off in that case by specifying all of your columns.
The problem with "select *" is the possibility of bringing data you don't really need. During the actual database query, the selected columns don't really add to the computation. What's really "heavy" is the data transport back to your client, and any column that you don't really need is just wasting network bandwidth and adding to the time you're waiting for you query to return.
Even if you do use all the columns brought from a "select *...", that's just for now. If in the future you change the table/view layout and add more columns, you'll start bring those in your selects even if you don't need them.
Another point in which a "select *" statement is bad is on view creation. If you create a view using "select *" and later add columns to your table, the view definition and the data returned won't match, and you'll need to recompile your views in order for them to work again.
I know that writing a "select *" is tempting, 'cause I really don't like to manually specify all the fields on my queries, but when your system start to evolve, you'll see that it's worth to spend this extra time/effort in specifying the fields rather than spending much more time and effort removing bugs on your views or optimizing your app.
While explicitly listing columns is good for performance, don't get crazy.
So if you use all the data, try SELECT * for simplicity (imagine having many columns and doing a JOIN... query may get awful). Then - measure. Compare with query with column names listed explicitly.
Don't speculate about performance, measure it!
Explicit listing helps most when you have some column containing big data (like body of a post or article), and don't need it in given query. Then by not returning it in your answer DB server can save time, bandwidth, and disk throughput. Your query result will also be smaller, which is good for any query cache.
You should really be selecting only the fields you need, and only the required number, i.e.
SELECT Field1, Field2 FROM SomeTable WHERE --(constraints)
Outside of the database, dynamic queries run the risk of injection attacks and malformed data. Typically you get round this using stored procedures or parameterised queries. Also (although not really that much of a problem) the server has to generate an execution plan each time a dynamic query is executed.
It is NOT faster to use explicit field names versus *, if and only if, you need to get the data for all fields.
Your client software shouldn't depend on the order of the fields returned, so that's a nonsense too.
And it's possible (though unlikely) that you need to get all fields using * because you don't yet know what fields exist (think very dynamic database structure).
Another disadvantage of using explicit field names is that if there are many of them and they're long then it makes reading the code and/or the query log more difficult.
So the rule should be: if you need all the fields, use *, if you need only a subset, name them explicitly.
The result is too huge. It is slow to generate and send the result from the SQL engine to the client.
The client side, being a generic programming environment, is not and should not be designed to filter and process the results (e.g. the WHERE clause, ORDER clause), as the number of rows can be huge (e.g. tens of millions of rows).
Naming each column you expect to get in your application also ensures your application won't break if someone alters the table, as long as your columns are still present (in any order).
Performance wise I have seen comments that both are equal. but usability aspect there are some +'s and -'s
When you use a (select *) in a query and if some one alter the table and add new fields which do not need for the previous query it is an unnecessary overhead. And what if the newly added field is a blob or an image field??? your query response time is going to be really slow then.
In other hand if you use a (select col1,col2,..) and if the table get altered and added new fields and if those fields are needed in the result set, you always need to edit your select query after table alteration.
But I suggest always to use select col1,col2,... in your queries and alter the query if the table get altered later...
This is an old post, but still valid. For reference, I have a very complicated query consisting of:
12 tables
6 Left joins
9 inner joins
108 total columns on all 12 tables
I only need 54 columns
A 4 column Order By clause
When I execute the query using Select *, it takes an average of 2869ms.
When I execute the query using Select , it takes an average of 1513ms.
Total rows returned is 13,949.
There is no doubt selecting column names means faster performance over Select *
Select is equally efficient (in terms of velocity) if you use * or columns.
The difference is about memory, not velocity. When you select several columns SQL Server must allocate memory space to serve you the query, including all data for all the columns that you've requested, even if you're only using one of them.
What does matter in terms of performance is the excecution plan which in turn depends heavily on your WHERE clause and the number of JOIN, OUTER JOIN, etc ...
For your question just use SELECT *. If you need all the columns there's no performance difference.
It depends on the version of your DB server, but modern versions of SQL can cache the plan either way. I'd say go with whatever is most maintainable with your data access code.
One reason it's better practice to spell out exactly which columns you want is because of possible future changes in the table structure.
If you are reading in data manually using an index based approach to populate a data structure with the results of your query, then in the future when you add/remove a column you will have headaches trying to figure out what went wrong.
As to what is faster, I'll defer to others for their expertise.
As with most problems, it depends on what you want to achieve. If you want to create a db grid that will allow all columns in any table, then "Select *" is the answer. However, if you will only need certain columns and adding or deleting columns from the query is done infrequently, then specify them individually.
It also depends on the amount of data you want to transfer from the server. If one of the columns is a defined as memo, graphic, blob, etc. and you don't need that column, you'd better not use "Select *" or you'll get a whole bunch of data you don't want and your performance could suffer.
To add on to what everyone else has said, if all of your columns that you are selecting are included in an index, your result set will be pulled from the index instead of looking up additional data from SQL.
SELECT * is necessary if one wants to obtain metadata such as the number of columns.
Gonna get slammed for this, but I do a select * because almost all my data is retrived from SQL Server Views that precombine needed values from multiple tables into a single easy to access View.
I do then want all the columns from the view which won't change when new fields are added to underlying tables. This has the added benefit of allowing me to change where data comes from. FieldA in the View may at one time be calculated and then I may change it to be static. Either way the View supplies FieldA to me.
The beauty of this is that it allows my data layer to get datasets. It then passes them to my BL which can then create objects from them. My main app only knows and interacts with the objects. I even allow my objects to self-create when passed a datarow.
Of course, I'm the only developer, so that helps too :)
What everyone above said, plus:
If you're striving for readable maintainable code, doing something like:
SELECT foo, bar FROM widgets;
is instantly readable and shows intent. If you make that call you know what you're getting back. If widgets only has foo and bar columns, then selecting * means you still have to think about what you're getting back, confirm the order is mapped correctly, etc. However, if widgets has more columns but you're only interested in foo and bar, then your code gets messy when you query for a wildcard and then only use some of what's returned.
And remember if you have an inner join by definition you do not need all the columns as the data in the join columns is repeated.
It's not like listing columns in SQl server is hard or even time-consuming. You just drag them over from the object browser (you can get all in one go by dragging from the word columns). To put a permanent performance hit on your system (becasue this can reduce the use of indexes and becasue sending unneeded data over the network is costly) and make it more likely that you will have unexpected problems as the database changes (sometimes columns get added that you do not want the user to see for instance) just to save less than a minute of development time is short-sighted and unprofessional.
Absolutely define the columns you want to SELECT every time. There is no reason not to and the performance improvement is well worth it.
They should never have given the option to "SELECT *"
If you need every column then just use SELECT * but remember that the order could potentially change so when you are consuming the results access them by name and not by index.
I would ignore comments about how * needs to go get the list - chances are parsing and validating named columns is equal to the processing time if not more. Don't prematurely optimize ;-)
Well I'm having a problem mainly caused by bad structure in database. I'm coding this for a company whose code is quite messy and the table is very large so I don't think it's an option to fix the structure.
Anyway, my issue is that I'm trying to somehow group a value that won't be alone in the string...
They are storing values separated with commas... So it would be like
field: "category" value: 'var1, var2, var3'
And I will search using this query:
SELECT name, category
FROM companies
WHERE (MATCH(name, category) AGAINST ('$search' IN BOOLEAN MODE)
OR category LIKE '$search%')
It would match with for example var2 (it's not limited to 3 variables though, can be solo or many more) and I'd split it manually in PHP, no problem. Although I will not get enough matches, I want e.g. 10 matches by different searches. To be more specific I'm making an autosuggest feature, which means I will for example want to match "moto%" with motorbike, motor alone or whatever but I keep getting the same values, like there'd be a couple of 100 of results that contains "motorbike" and I don't know how to filter them, as I'm not able to use GROUP BY due to bad db structure...
I found this: T-SQL - GROUP BY with LIKE - is this possible?
It SEEMED as something that would be a solution, but as far as I've tried I could not get it work with what I wanted.
So I'm wondering which solutions there are... If there are ABSOLUTELY no way of working this around I might probably have to fix the db structure (but this really has to be the last option)
Start taking steps to make database structure proper. Make an extra table and fill it with split values.
Then you can use proper queries to select the data you need. Both you and next developer will have less troubles with this project in the future, not mentioning queries speed gain.
I am not sure why i cannot write a comment, but maybe you can try this:
SELECT name, category FROM companies WHERE category LIKE '$search%' or LOCATE('search', category)>0;
That would look if in category appears any of your 'search' value.
I would have to agree that you should make the database right. It'll save you much trouble and time later. However, using SELECT DISTINCT may fix your immediate issue.
I have a mongodb collection contains lots of books with many fields. Some key fields which are relevant for my question are :
{
book_id : 1,
book_title :"Hackers & Painters",
category_id : "12",
related_topics : [ {topic_id : "8", topic_name : "Computers"},
{topic_id : "11", topic_name : "IT"}
]
...
... (at least 20 fields more)
...
}
We have a form for filtering results (with many inputs/selectbox) on our search page. And of course there is also pagination. With the filtered results, we show all categories on the page. For each category, number of results found in that category is also shown on the page.
We try to use MongoDB instead of PostgreSQL. Because performance and speed is our main concern for this process.
Now the question is :
I can easily filter results by feeding "find" function with all filter parameters. That's cool. I can paginate results with skip and limit functions :
$data = $lib_collection->find($filter_params, array())->skip(20)->limit(20);
But I have to collect number of results found for each category_id and topic_id before pagination occurs. And I don't want to "foreach" all results, collect categories and manage pagination with PHP, because filtered data often consists of nearly 200.000 results.
Problem 1 : I found mongodb::command() function in PHP manual with a "distinct" example. I think that I get distinct values by this method. But command function doesn't accept conditional parameters (for filtering). I don't know how to apply same filter params while asking for distinct values.
Problem 2 : Even if there is a way for sending filter parameters with mongodb::command function, this function will be another query in the process and take approximately same time (maybe more) with the previous query I think. And this will be another speed penalty.
Problem 3 : In order to get distinct topic_ids with number of results will be another query, another speed penalty :(
I am new with working MongoDB. Maybe I look problems from the wrong point of view. Can you help me solve the problems and give your opinions about the fastest way to get :
filtered results
pagination
distinct values with number of results found
from a large data set.
So the easy way to do filtered results and pagination is as follows:
$cursor = $lib_collection->find($filter_params, array())
$count = $cursor->count();
$data = $cursor->skip(20)->limit(20);
However, this method may not be somewhat inefficient. If you query on fields that are not indexed, the only way for the server to "count()" is to load each document and check. If you do skip() and limit() with no sort() then the server just needs to find the first 20 matching documents, which is much less work.
The number of results per category is going to be more difficult.
If the data does not change often, you may want to precalculate these values using regular map/reduce jobs. Otherwise you have to run a series of distinct() commands or in-line map/reduce. Neither one is generally intended for ad-hoc queries.
The only other option is basically to load all of the search results and then count on the webserver (instead of the DB). Obviously, this is also inefficient.
Getting all of these features is going to require some planning and tradeoffs.
Pagination
Be careful with pagination on large datasets. Remember that skip() and take() --no matter if you use an index or not-- will have to perform a scan. Therefore, skipping very far is very slow.
Think of it this way: The database has an index (B-Tree) that can compare values to each other: it can tell you quickly whether something is bigger or smaller than some given x. Hence, search times in well-balanced trees are logarithmic. This is not true for count-based indexation: A B-Tree has no way to tell you quickly what the 15.000th element is: it will have to walk and enumerate the entire tree.
From the documentation:
Paging Costs
Unfortunately skip can be (very) costly and requires the
server to walk from the beginning of the collection, or index, to get
to the offset/skip position before it can start returning the page of
data (limit). As the page number increases skip will become slower and
more cpu intensive, and possibly IO bound, with larger collections.
Range based paging provides better use of indexes but does not allow
you to easily jump to a specific page.
Make sure you really need this feature: Typically, nobody cares for the 42436th result. Note that most large websites never let you paginate very far, let alone show exact totals. There's a great website about this topic, but I don't have the address at hand nor the name to find it.
Distinct Topic Counts
I believe you might be using a sledgehammer as a floatation device. Take a look at your data: related_topics. I personally hate RDBMS because of object-relational mapping, but this seems to be the perfect use case for a relational database.
If your documents are very large, performance is a problem and you hate ORM as much as I do, you might want to consider using both MongoDB and the RDBMS of your choice: Let MongoDB fetch the results and the RDBMS aggregate the best matches for a given category. You could even run the queries in parallel! Of course, writing changes to the DB needs to occur on both databases.