I did install XAMPP on ubuntu , and it was working fine , but today when I installed nessus , I figure out that i can't enter to phpmyadmin it give me this error:
#2002 - No such file or directory
The server is not responding (or the local server's socket is not correctly configured).
In your xampppath\apache\conf\extra open file httpd-xampp.conf
Find:
# Close XAMPP sites here
<LocationMatch "^/(?i:(?:xampp|licenses|phpmyadmin|webalizer|server-status|server-info))">
Order deny,allow
Deny from all
Allow from ::1 127.0.0.0/8
ErrorDocument 403 /error/HTTP_XAMPP_FORBIDDEN.html.var
</LocationMatch>
Replace With
# Close XAMPP sites here
<LocationMatch "^/(?i:(?:xampp|licenses|phpmyadmin|webalizer|server-status|server-info))">
Order deny,allow
Allow from all
Allow from ::1 127.0.0.0/8
ErrorDocument 403 /error/HTTP_XAMPP_FORBIDDEN.html.var
</LocationMatch>
Add the lines:
/Edited/
at the end of the file 000-ispconfig.conf file in the sites-enabled folder of your apache configuration add
<Directory /usr/share/phpMyAdmin>
Order allow,deny
Allow from all
</Directory>
and restart xampp, and all should be well
Related
I know this question has been asked a lot of times
I followed Most of the answers in the internet But I still get the same Message
403 Forbidden
You don't have permission to access / on this server.
It is weird that when I access using the same PC to localhost:1234 it runs normally but if I access using my IP address 192.168.0.188:1234
Also which is really weird is that I tried to install WAMP on other PC and without any configuration I could access to that PC.
So I thought it's because McAfee and Firewall so I open port on Widows and McAfee and nothing changed also I turned off Firewall and still nothing change.
Then for no reason I opened port through the Router “port forwarding” and still nothing changed.
I don't think that it's because my configuration in WAMP since I am still able to get this 403 Forbidden Message and also by using other PC without any configuration I could access it.
Both PCs are setup like this:
Windows 8 Pro
WAMP Wampserver: 2.4
Apache Version: 2.4.4
PHP Version: 5.4.12
MySQL Version: 5.6.12
The accessible PC uses Microsoft Security Essentials.
The inaccessible PC uses McAfee Internet Security.
I tried to turn off WAMP and start IIS For Microsoft Server (I works perfectly From any PC) but WAMP is still not not working
I followed these tutorial:
How to Access WAMP Server in LAN or WAN
Install & Setup Virtual Host Guide for WAMP
Install & Setup LAN & Worldwide Access Guide for WAMP
And the Stack Overflow answers here:
Cannot access wamp server on local network
WAMP 403 Forbidden message on Windows 7
If you are using WAMPServer 3 See bottom of answer
For WAMPServer versions <= 2.5
By default Wampserver comes configured as securely as it can, so Apache is set to only allow access from the machine running wamp. Afterall it is supposed to be a development server and not a live server.
Also there was a little error released with WAMPServer 2.4 where it used the old Apache 2.2 syntax instead of the new Apache 2.4 syntax for access rights.
You need to change the security setting on Apache to allow access from anywhere else, so edit your httpd.conf file.
Change this section from :
# onlineoffline tag - don't remove
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
To :
# onlineoffline tag - don't remove
Require local
Require ip 192.168.0
The Require local allows access from these ip's 127.0.0.1 & localhost & ::1.
The statement Require ip 192.168.0 will allow you to access the Apache server from any ip on your internal network. Also it will allow access using the server mechines actual ip address from the server machine, as you are trying to do.
WAMPServer 3 has a different method
In version 3 and > of WAMPServer there is a Virtual Hosts pre defined for localhost so you have to make the access privilage amendements in the Virtual Host definition config file
First dont amend the httpd.conf file at all, leave it as you found it.
Using the menus, edit the httpd-vhosts.conf file.
It should look like this :
<VirtualHost *:80>
ServerName localhost
DocumentRoot D:/wamp/www
<Directory "D:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
Amend it to
<VirtualHost *:80>
ServerName localhost
DocumentRoot D:/wamp/www
<Directory "D:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
Hopefully you will have created a Virtual Host for your project and not be using the wamp\www folder for your site. In that case leave the localhost definition alone and make the change only to your Virtual Host.
Dont forget to restart Apache after making this change
For Apache 2.4.9
in addition, look at the httpd-vhosts.conf file in C:\wamp\bin\apache\apache2.4.9\conf\extra
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot C:/wamp/www
<Directory "C:/wamp/www/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Require local
</Directory>
</VirtualHost>
Change to:
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot C:/wamp/www
<Directory "C:/wamp/www/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Require all granted
</Directory>
</VirtualHost>
changing from "Require local" to "Require all granted" solved the error 403 in my local network
I got this answer from here. and its works for me
Require local
Change to
Require all granted
Order Deny,Allow
Allow from all
To expand on RiggsFolly’s answer—or for anyone who is facing the same issue but is using Apache 2.2 or below—this format should work well:
Order Deny,Allow
Deny from all
Allow from 127.0.0.1 ::1
Allow from localhost
Allow from 192.168
Allow from 10
Satisfy Any
For more details on the format changes for Apache 2.4, the official Upgrading to 2.2 from 2.4 page is pretty clear & concise. Key point being:
The old access control idioms should be replaced by the new
authentication mechanisms, although for compatibility with old
configurations, the new module mod_access_compat is provided.
Which means, system admins around the world don’t necessarily have to panic about changing Apache 2.2 configs to be 2.4 compliant just yet.
For those who may be running WAMP 3.1.4 with Apache 2.4.35 on Windows 10 (64-bit)
If you're having issues with external devices connecting to your localhost, and receiving a 403 Forbidden error, it may be an issue with your httpd.conf and the httpd-vhosts.conf files and the "Require local" line they both have within them.
[Before] httpd-vhosts.conf
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local <--- This is the offending line.
</Directory>
</VirtualHost>
[After] httpd-vhosts.conf
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
</Directory>
</VirtualHost>
Additionally, you'll need to update your httpd.conf file as follows:
[Before] httpd.conf
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
# onlineoffline tag - don't remove
Require local #<--- This is the offending line.
</Directory>
[After] httpd.conf
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
# onlineoffline tag - don't remove
# Require local
</Directory>
Make sure to restart your WAMP server via (System tray at bottom-right of screen --> left-click WAMP icon --> "Restart all Services").
Then refresh your machine's browser on localhost to ensure you've still got proper connectivity there, and then refresh your other external devices that you were previously attempting to connect.
Disclaimer: If you're in a corporate setting, this is untested from a security perspective; please ensure you're keenly aware of your local development environment's access protocols before implementing any sweeping changes.
We have an amazon linux server. It was running php 5.3 we wanted to update to 5.6 to see if it would solve an issue with a plugin on our wordpress installation. I installed php 5.6 and am now having issues getting back into phpMyAdmin and our wordpress site which I think isn't loading because of the database problem.
When I go to /phpMyAdmin I get Forbidden
You don't have permission to access /phpMyAdmin on this server.
I've found a few threads on here suggesting things such as placing the following in my phpMyAdmin.conf file:
<Directory /usr/share/phpMyAdmin/>
AddDefaultCharset UTF-8
<IfModule mod_authz_core.c>
# Apache 2.4
<RequireAny>
#Require ip 127.0.0.1
#Require ip ::1
Require all granted
</RequireAny>
</IfModule>
<IfModule !mod_authz_core.c>
# Apache 2.2
Order Deny,Allow
Deny from All
Allow from 127.0.0.1
Allow from ::1
</IfModule>
</Directory>
I have tried this, also I added Allow from 'my static ip'. I have also restarted httpd still nothing. The other thing that is happening is I'm getting the Amazon Linux AMI Test Page when I go to what should be our wordpress website, I'm not sure if these are the same problem but I assume it is related.
The website in question is calendar.childmags.com.au
I think you have to off the strict mode. For the temporary solution you can use
For all DB:_
SET ##global.sql_mode=''
For current DB:-
SET sql_mode = ''
i have phpmyadmin on my amazon server installed ( in /usr/share/phpMyAdmin folder)
my phpMyAdmin.conf seems correct
i was able to access it from my browser before by typing https://xxx.xxx.xxx.xxx/phpmyadmin
After i restored my amazon instance from a snapshot , i can not access it anymore
i get this error :
Not Found
The requested URL /phpMyAdmin/navigation.php< was not found on this server.
Then i noticed Apache doesn't serve php files in that directory at all
Even when i put a minimal php file in that folder for test and point to it in browser, it will return it as a text file and i can see php codes in it!
I searched about it and found many similar issues, but none of them helped me
can anyone help me to find source of this issue?
ps: i have several virtual servers on my server and they are working fine.
here is a part of my phpMyAdmin.conf :
Alias /phpMyAdmin /usr/share/phpMyAdmin
Alias /phpmyadmin /usr/share/phpMyAdmin
<Directory /usr/share/phpMyAdmin/>
<IfModule mod_authz_core.c>
# Apache 2.4
<RequireAny>
Require ip 127.0.0.1
Require ip ::1
</RequireAny>
</IfModule>
<IfModule !mod_authz_core.c>
# Apache 2.2
Order Deny,Allow
#Deny from All
Allow from all
Allow from ::1
</IfModule>
</Directory>
use this to run files inside htdocs localhost/navigation.php
I already install zend framework and i used wamp server to let it works then in httpconfig i inserted
NameVirtualHost 127.0.0.1
DocumentRoot "C:\Workspace\zendy\public"
ServerName zendy
<Directory "C:\Workspace\zendy\public">
Options FollowSymLinks
AllowOverride AuthConfig Limit Indexes
Order allow,deny
Allow from all
</Directory>
after restarting wamp server ... the below message appears
Internal Server Error
i know the error in virtualhost. however, i couldn't solve the problem
You can enable rewrite module directly by clicking wamp tray icon and going into Apache settings. Like example below.
If you still find some problems you may need to add zendy server name to your system C:\Windows\System32\drivers\etc\hosts file:
127.0.0.1 zendy
Also you must uncomment vhosts in Apache httpd.conf:
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
Hope that helps!
just look into Apache Error Log, you should see what exactly caused Internal Server Error there
Greetings experts and gurus, I am looking for some help with an apache php configuration problem.
I have been running several websites from an apache2 setup on an ubuntu server for some time now without problems using the line NameVirtualHost * in my etc/apache2/conf.d/virtual.conf file. I recently updated the server version to the latest lts version and I am now unable to run php files.
I am running all my sites for the location "/home/www/[site-name]/htdocs" and I have setup and enabled all my sites in /etc/apache2/sites-available. I have also disabled the default site.
for each sites file I have specified the following:
# Indexes + Directory Root.
# DirectoryIndex index.html index.htm index.php
DocumentRoot /home/www/[site-name]/htdocs/
# CGI Directory
ScriptAlias /cgi-bin/ /home/www/[site-name]/cgi-bin/
<Location /cgi-bin>
Options +ExecCGI
</Location>
# Logfiles
ErrorLog /home/www/[site-name]/logs/error.log
CustomLog /home/www/[site-name]/logs/access.log combined
I restart apache and enter the url for a php test page on my server and I am met with an "Internal Server Error". When I check the error log I get:
Script "/home/www/[site-name]/htdocs/test.php" resolving to "/home/www/[site-name]/htdocs/test.php" not within configured docroot.
For some reason when looking into the error, suphp came up a lot. According to this link:
Don't be fooled into thiking this has anything to do with the Apche virtual host document root, this is actually another setting in the suphp config file. Including the paths which contained the RoundCube scripts fixed this one. For example:
docroot=/var/www:/usr/share/roundcube:/var/lib/roundcube:${HOME}/public_html
You need to edit your /etc/suphp/suphp.conf file and change the docroot to whatever is appropriate.
It looks you missed the virtual hosts configuration for every site name:
<VirtualHost IP:80>
ServerName yourdomainname
ServerAlias www.yourdomainname
DocumentRoot /home/www/[site-name]/htdocs/
ScriptAlias /cgi-bin/ /home/www/[site-name]/cgi-bin/
<Location /cgi-bin>
Options +ExecCGI
</Location>
ErrorLog /home/www/[site-name]/logs/yourdomainname.ua-error.log
CustomLog /home/www/[site-name]/logs/yourdomainname-access.log combined
</VirtualHost>
<Directory "/home/www/[site-name]/htdocs/">
Options FollowSymLinks
AllowOverride None
Order allow,deny
<Limit GET POST OPTIONS>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
Thanks for all the help, I got there in the end. It seems that upgrading to Ubuntu 10.04 turned on suPHP. It has ended up being a good thing as the reason why I was getting errors was down to file management in my htdocs getting sloppy.
To fix my issues I had to do several things:
First I turned on suphp error messages in /etc/apache2/sites-available/[site-name]. This gave me the true error, which told me that some of my pages had the wrong permissions. I then set all my folder permissions in www to 755 and the files to 644. I also had to lower the min_uid and min_gid fileds in suphp.conf to 33.