I've done all the things suggested by other answers to this question (or at least I think I have), but I'm still completely stuck.
The specific problem going on at the moment is that the compiler can't find zend_config.h. I have PHP 5.5.10, which came with my out-of-the-box MAMP install. My first attempts were failing because the compiler couldn't find php.h. It seems that I need the PHP source code in order to build the mongo driver. A surprise to me (perhaps I'm too much of a n00b), but ok.
Unfortunately, I could not find the source for 5.5.10, only 5.5.14. Who knows whether that's what I really need. Out of desperation, I copied the main and Zend folders from 5.5.14 to my 5.5.10 folder. So I have php.h, but now no zend_config.h. There are zend_config.w32.h and zend_config.nw under the Zend folder. I guess I could take a desperate measure again and try renaming one of these files to see whether the extension will build, but I'd rather hear from someone who knows what they're doing.
Other answers to this kind of question say that you need the XCode command-line tools. I'm running Mavericks, so I got the command-line tools for Mavericks. I have XCode 5.1.1; I realize that it's up to V6 now, but do I really need the latest version of XCode for this? The installation of MongoDB itself using homebrew was beautifully uneventful. I got the mongo extension source from github and I'm following the very brief instructions from that repo.
I'm amazed that installing a simple extension would be this hard. I sure hope mongodb is enough of a performance improvement to justify this much headache. Can anyone give me an idea of how to get this going?
I had this same issue. It might be the fact that MAMP uses it's own .ini file and seems to ignore the .ini file in it's own PHP conf folder.
Once i updated MAMP's own .ini file (stored in /Applications/MAMP etc...).
Check your phpInfo page and look for the following:
Loaded Configuration File: /Library/Application Support/appsolute/MAMP PRO/conf/php.ini
Related
sorry if I seem like an absolute beginner at these things. I wanted to get the PHP extension for GEOS. I already have PHP (though XAMPP) and GEOS installed. Now, trying out the instructions on GitHub, I soon realize that these are instructions for Linux. I've been googling instructions for getting PHP extensions in Windows, but I've learned that it's not quite simple. Based on what I've found I would either need to
Use Visual Studio (which I would have to download first)
Find a dll (there is none)
Recompile PHP with the extension (not sure if I said it right)
So I have two questions: firstly, which of these options are most suitable for getting just one extension? And secondly, regarding the recompiling option, would I have compile things from a different source, since I got PHP from XAMPP and it doesn't seem to have the option to install the components separately.
EDIT: I believe that my question is not the same as this one because the user here actually found relevant DLLs, and did not have to compile anything or use Visual Studio.
I'm on Windows 10, and I really need to install this PHP extension in order to use advanced GeoPHP methods. I've already asked about this previously here. There is no available DLL for this extension, and the instructions for installation on GitHub are for Linux. What I've understood is that I need to recompile PHP with the extensions in the ext folder, so I'm planning on doing that using these instructions. However, I've previously installed PHP through XAMPP.
My question is, will these instructions work with this? If yes, where can I find the PHP source files? I'm not quite sure what they look like, and googling "PHP source files location" gives me stuff about actual PHP files, not the ones used for installation. I just want to make sure. Thanks.
No, you do not have to recompile PHP. The module you stated is not baked into PHP but dynamically included.
Just build the module and include it like
extension=geos.dll
The Github link you posted does have instructions...
I have VSCode installed, but don't seem to have php - i.e. there is no "php.exe" anywhere on my computer. No guides that I can find on the web about setting VSCode up for PHP suggests that I need to download and install php itself seperately (only debuggers and linters)... my question is:
Do I need to install PHP seperately? Should I have had to do this, or is there a bug in my VSCode installation...
Yes you need to install PHP from the php website and then tell VSCode where PHP.exe is located.
VSCode is an editor not an interpreter.
I think if you install PHP at the default location VSCode will automaticly pick it up but if not you need to specify its path in options.
If you install XAMPP you will get apache,php and mySql in one installation.
EDIT: an interpreter is software that translated your code(in your case PHP) into code that the CPU can understand and then executes.
#kpollock it' not you. Yes, it should seem obvious that the language should be installed manually or separately, so you should have gotten that part, sorry. But no, there doesn't seem to be information anywhere about defining the underpinnings. This "understanding" seems to be left to the individual through research as you're doing.
After I installed PHP I manually set my environment PATH to include the PHP folder. OR in VS Code you can go to menu>File>Preferences>User Settings, the settings are maintained as a JSON object (unlike VS) and there is a PHP section for the .exe path.
Since you mentioned Node, you may not have installed Node.js manually. (I don't know if Node comes with VS Code either.) It might have come in with a VS2015 extension like Gulp or some other higher-level functionality, or maybe it was an installation option with VSC. If you can't use node or npm from a console, set your environment PATH to include it.
In the past, I used WAMPserver on windows to parse PHP for me. This is a pre-configured package, focussed on working with MySQL.
When I tried to run PostgreSQL, I got error messages that said that my version of PHP wasn't compiled to work with PostgreSQL.
So, I've recently uninstalled WAMP and every associated with it. I've downloaded Apache 2.2.11 with openSSL, installed as admin(you know, run the command prompt as administrator, cd to the directory where the download was done and have it executed, so the install was done as admin).
That's that. I now have Apache installed, "it works" shows up, so I'm that far.
Now I'm wondering, do I download the exe and install, or the zip, or something else.
What is the best thing to do to make sure that the PHP on my system can handle everything I can ever throw at it?
Also, PHP first, or MySQL/Postgre first.
And lastly, what about PEAR? I need PEAR installed, which isn't standard on Windows. I'm guessing the pear.bat file in the PHP downloads will do that for me?
EDIT: I see one close vote, yet no comment as to why. It makes me wonder how people who are so lazy and rude got to have somany points.
I would recommend downloading the zip package, as configuring php is not really that difficult, and it allows you to add features as needed.
As for whether first to install php or MySQL/PostgreSQL, - it does not really matter. You can install them in any order.
Your guess regarding PEAR is quite correct
i haven't used wamp before, so i can't comment on that
i do however use xampp which sounds very similar
in xampp if i want to enable postgres support i edit the php.ini file and uncomment the postgres section of the ini file, same with any of the extensions that i need
perhaps this might be an alternative you can try if you get stuck
There are many ways to setup a HTTP server/PHP/database machine. Sometimes the behaviour of your development setup will differ from the live server's.
I would recommend finding out the setup your web host is using, then getting a vmware appliance image that fits that as close as possible and get any additional software using it's package manager (which is easier that installing stuff on Windows).
Setup a file sharing link between the VM and the host, make sure you can view the VM's port 80 in a browser running in your host OS and you're set.
I found a few related posts here but didn't get my answer. So posting again.
How would I install a PECL extension on windows? Say I want the PECL oAuth extension on Windows XP.
I know 2 methods, but none of them is working for me.
The site http://pecl4win.php.net/ is down for months. So I cant download the DLL. Is there any place we can download the DLLs from ?
running the command
pecl install oauth-0.99.9.tgz is throwing the error
The DSP oauth.dsp does not exist.
I tried with few other extensions also and getting the same error.
What am I missing here?
Releases can now be found here:
http://windows.php.net/downloads/pecl/releases/
If you need an extension not available there you might ask on the pecl-dev at lists.php.net mailing list.
I got what I am looking for in http://windows.php.net/downloads/pecl/releases/
Currently PECL for windows is in an odd reformation state. The reason being that I believe they are trying to provide VS2008 source versions. I would actually suggest using Zend Server for now until the windows half of the php group gets everything fixed up. Zend Server includes almost all of the extensions that you can find in PECL, and everything else, if you are lucky, you could find an compile yourself.
The PECL installer downloads the source code of the extension and tries to compile it with your local C compiler. The problem is that the whole process is designed for Unix systems, where a C compiler is available or can be easily installed. Setting an environment to compile C code under Windows is pretty complicate.
The ideal solution is getting a DLL file that someone already compiled. That's what the pcle4win site was for. However, there's currently no official repository to download PECL DLLs so you only have two alternatives:
Find an unofficial DLL somewhere in Google
Compile it yourself (another link) with Microsoft Visual Studio
It'd be cool that there was a DLL repository out there but I'm unaware of any.
The php source ships with a set of configuration scripts for windows (using windows script host) that mimics the autoconf tools as far as php is concerned. If you place the code for the extension in a directory under the /ext directory (where all the other extensions like bcmath, bzip, ... are located) you can let the buildconf-script create a makefile that includes the build rules for that (new) extension.
There's a step-by-step walk-through at http://wiki.php.net/internals/windows/stepbystepbuild which seems to be brief but feasible.
compiled oauth: http://windows.php.net/downloads/pecl/releases/oauth/
another pecl extension: http://windows.php.net/downloads/pecl/releases/