I'm new to PHP and I found in my code, when I pass a FALSE to a function. It converted to null immediately. I've read some articles knowing that False and null are equal. But I don't know when this conversion happens.
Below is my code
function equal($expected, $actual){
if($expected == $actual) { //... }
}
function foo(){
$signal = getSignal();
equal(FALSE, $signal->good); //...
}
You will need to use triple equal signs === for equality. For example
false == null; // true
false === null; // false
0 == false; // true
0 === false; // false
Check the docs on comparison operators
No, they are NOT converted. You can var_dump($variable) at any time to see both the type and the value of $variable any time. But there are a few things which evaluates to false with the == comparison operator. So in fact false == null will evaluate to true just as false == 0 or false == "0" in PHP. This is why the comparison operator === comes into the picture - using that instead of == in above example, all will evaluate to false instead of true.
For more information, see http://php.net/manual/en/language.operators.comparison.php
Related
if(strpos("http://www.example.com","http://www.")==0){ // do work}
I'd expect this to resolve as true, which it does. But what happens when I do
if(strpos("abcdefghijklmnop","http://www.")==0){// do work}
This also passes on php 5 because as far as I can work out the strpos returns false which translates as 0.
Is this correct thinking/behaviour? If so what is the workaround for testing for that a substring is at the beginning of another string?
Yes, this is correct / expected behavior :
strpos can return 0 when there is a match at the beginning of the string
and it will return false when there is no match
The thing is you should not use == to compare 0 and false ; you should use ===, like this :
if(strpos("abcdefghijklmnop","http://www.") === 0) {
}
Or :
if(strpos("abcdefghijklmnop","http://www.") === false) {
}
For more informations, see Comparison Operators :
$a == $b will be TRUE if $a is equal to $b.
$a === $b will be TRUE if $a is equal to $b, and they are of the same type.
And, quoting the manual page of strpos :
This function may return Boolean
FALSE, but may also return a
non-Boolean value which evaluates to
FALSE, such as 0 or "". Please
read the section on Booleans for
more information. Use the ===
operator for testing the return
value of this function.
=== and !== compare type and value as shown below:
if (strpos("abcdefghijklmnop", "http://www.") !== false) {
// do work
}
strpos returns an int or boolean false. the == operator also evaluates 0 to mean false, you want to use the === operator (three equals signs) that also checks that the types being compared are the same instead of just seeing if they can be evaluated to mean the same.
so
if (strpos($hastack, $needle) === 0)
{
// the $needle is found at position 0 in the $haystack
}
0 is a possible return value from strpos when it finds a match at the very beginning. In case if the match is not found it returns false(boolean). So you need to check the return value of strpos using the === operator which check the value and the type rather than using == which just checks value.
I personally tend to use this way :
if(!strpos($v,'ttp:'))$v='http://'.$v;
or
if(strpos(' '.$v,'http'))
to avoid the "0" position then always make it a number more than 0
cheers
In JavaScript, the == operator isn't necessarily transitive:
js> '0' == 0
true
js> 0 == ''
true
js> '0' == ''
false
Is the same true in PHP? Can you give an example?
No, the == operator is not transitive.
The exact same scenario gives the same result in PHP.
echo var_dump('0'==0);
echo var_dump(0=='');
echo var_dump('0'=='');
yields:
boolean true
boolean true
boolean false
The same is true in PHP:
//php
'0'==0 //true
0=='' //true
''=='0' //false
Did you not test it yourself? These are the same statements you provided for javascript.
array() == NULL // true
0 == NULL // true
array() == 0 // false
The problem with scripting languages is that we start comparing things in a non-strict way, which leads to different senses of "equality." when you are comparing "0" and 0, you mean something different then when you are comparing "0" and NULL. Thus it makes sense that these operators would not be transitive. Reflexivity however, should be an invariant. Equality is by definition reflexive. No matter what sense you mean equality, it should always be true that A equals itself.
another more obvious one:
true == 1 // true
true == 2 // true
1 == 2 // false
I've always done this: if ($foo !== $bar)
But I realized that if ($foo != $bar) is correct too.
Double = still works and has always worked for me, but whenever I search PHP operators I find no information on double =, so I assume I've always have done this wrong, but it works anyway. Should I change all my !== to != just for the sake of it?
== and != do not take into account the data type of the variables you compare. So these would all return true:
'0' == 0
false == 0
NULL == false
=== and !== do take into account the data type. That means comparing a string to a boolean will never be true because they're of different types for example. These will all return false:
'0' === 0
false === 0
NULL === false
You should compare data types for functions that return values that could possibly be of ambiguous truthy/falsy value. A well-known example is strpos():
// This returns 0 because F exists as the first character, but as my above example,
// 0 could mean false, so using == or != would return an incorrect result
var_dump(strpos('Foo', 'F') != false); // bool(false)
var_dump(strpos('Foo', 'F') !== false); // bool(true), it exists so false isn't returned
!== should match the value and data type
!= just match the value ignoring the data type
$num = '1';
$num2 = 1;
$num == $num2; // returns true
$num === $num2; // returns false because $num is a string and $num2 is an integer
$a !== $b TRUE if $a is not equal to $b, or they are not of the same type
Please Refer to http://php.net/manual/en/language.operators.comparison.php
You can find the info here: http://www.php.net/manual/en/language.operators.comparison.php
It's scarce because it wasn't added until PHP4. What you have is fine though, if you know there may be a type difference then it's a much better comparison, since it's testing value and type in the comparison, not just value.
if(strpos("http://www.example.com","http://www.")==0){ // do work}
I'd expect this to resolve as true, which it does. But what happens when I do
if(strpos("abcdefghijklmnop","http://www.")==0){// do work}
This also passes on php 5 because as far as I can work out the strpos returns false which translates as 0.
Is this correct thinking/behaviour? If so what is the workaround for testing for that a substring is at the beginning of another string?
Yes, this is correct / expected behavior :
strpos can return 0 when there is a match at the beginning of the string
and it will return false when there is no match
The thing is you should not use == to compare 0 and false ; you should use ===, like this :
if(strpos("abcdefghijklmnop","http://www.") === 0) {
}
Or :
if(strpos("abcdefghijklmnop","http://www.") === false) {
}
For more informations, see Comparison Operators :
$a == $b will be TRUE if $a is equal to $b.
$a === $b will be TRUE if $a is equal to $b, and they are of the same type.
And, quoting the manual page of strpos :
This function may return Boolean
FALSE, but may also return a
non-Boolean value which evaluates to
FALSE, such as 0 or "". Please
read the section on Booleans for
more information. Use the ===
operator for testing the return
value of this function.
=== and !== compare type and value as shown below:
if (strpos("abcdefghijklmnop", "http://www.") !== false) {
// do work
}
strpos returns an int or boolean false. the == operator also evaluates 0 to mean false, you want to use the === operator (three equals signs) that also checks that the types being compared are the same instead of just seeing if they can be evaluated to mean the same.
so
if (strpos($hastack, $needle) === 0)
{
// the $needle is found at position 0 in the $haystack
}
0 is a possible return value from strpos when it finds a match at the very beginning. In case if the match is not found it returns false(boolean). So you need to check the return value of strpos using the === operator which check the value and the type rather than using == which just checks value.
I personally tend to use this way :
if(!strpos($v,'ttp:'))$v='http://'.$v;
or
if(strpos(' '.$v,'http'))
to avoid the "0" position then always make it a number more than 0
cheers
I have been programming in PHP for a while but I still dont understand the difference between == and ===. I know that = is assignment. And == is equals to. So what is the purpose of ===?
It compares both value and type equality.
if("45" === 45) //false
if(45 === 45) //true
if(0 === false)//false
It has an analog: !== which compares type and value inequality
if("45" !== 45) //true
if(45 !== 45) //false
if(0 !== false)//true
It's especially useful for functions like strpos - which can return 0 validly.
strpos("hello world", "hello") //0 is the position of "hello"
//now you try and test if "hello" is in the string...
if(strpos("hello world", "hello"))
//evaluates to false, even though hello is in the string
if(strpos("hello world", "hello") !== false)
//correctly evaluates to true: 0 is not value- and type-equal to false
Here's a good wikipedia table listing other languages that have an analogy to triple-equals.
It is true that === compares both value and type, but there is one case which hasn't been mentioned yet and that is when you compare objects with == and ===.
Given the following code:
class TestClass {
public $value;
public function __construct($value) {
$this->value = $value;
}
}
$a = new TestClass("a");
$b = new TestClass("a");
var_dump($a == $b); // true
var_dump($a === $b); // false
In case of objects === compares reference, not type and value (as $a and $b are of both equal type and value).
The PHP manual has a couple of very nice tables ("Loose comparisons with ==" and "Strict comparisons with ===") that show what result == and === will give when comparing various variable types.
It will check if the datatype is the same as well as the value
if ("21" == 21) // true
if ("21" === 21) // false
=== compares value and type.
== doesn't compare types, === does.
0 == false
evaluates to true but
0 === false
does not
Minimally, === is faster than == because theres no automagic casting/coersion going on, but its so minimal its hardly worth mentioning. (of course, I just mentioned it...)
It's a true equality comparison.
"" == False for instance is true.
"" === False is false